It is impossible to be indifferent to tea or coffee. They will add a soulful note to friendships or family gatherings. Water quality plays a dominant role in perfect brewing. Not only the taste of the drink depends on this, but also the "health" of the teapot. And although this is a rather unpretentious household appliance, it still requires maintenance. Over time, its inner coating and heating element (spiral or disc in electrical models) are overgrown with scale. Therefore, it is important to know how to descale your kettle at home.

The modern variety of teapots is amazing. You can't keep up with innovations: manufacturers experiment with materials, technologies, shapes and colors. To make the kettle last a long time, it is advised to use spring, filtered or bottled water. And if this is not possible, settle the tap water throughout the day.

Why does plaque appear

Over time, scale will appear in any kettle. But the increased hardness of the water will significantly shorten these periods and will cause many problems. Firstly, scale is dangerous for the heating element. A spiral or a metal disc covered with a deposit quickly overheats, loses heat transfer and, as a result, burns out. Secondly, for boiling you will need additional expenses electricity. Well, it is clear that water is only from clean dishes will give coffee or tea a good taste.

Hard water contains excess amounts of calcium and magnesium salts. A hardness of 3 to 6 mEq / L is considered normal. White and dark spots on faucets, sink or toilet, clogged holes in the shower pipe, whitish spots on washed dishes, persistent lime deposits in the kettle are sure signs of high water hardness (from 6 to 9 meq / l).

Many people believe that installing a filter (jug, flow or reverse osmosis) will completely eliminate the problem of scale. In fact, it will reduce plaque build-up, but only slightly. The action of most filters is not aimed at softening water, but at its mechanical cleaning from heavy metals and bleach.

How to descale a kettle: special chemicals

Before you remove the scale in the teapot, you need to remember: it is impossible to mechanically remove the plaque that has already formed. If you start scrubbing or scrubbing it with your own hands, you will ruin the device. Therefore, in our time, many chemical agents have been created to combat scale. Basically, these are liquid or powder preparations based on soda ash.

They all have an identical principle of operation: according to the indicated dosage, we put it into a kettle, fill the device with water up to the maximum mark and boil it. After that, rinse thoroughly, boil fresh water again and drain.

Do not use cleaning gels or powders with coarse abrasive granules. They will scratch the surface, and the scale will adhere even more firmly to the bottom and sides of the kettle.

The main disadvantage industrial facilities is that chemical substances can enter the stomach. So it is not harmless. Yes, and not all formulations give the desired effect.

Old-fashioned methods

Rest assured: time-tested folk recipes guarantee a 100% positive result. Ordinary soda, vinegar and "lemon" are recognized leaders among the remedies for descaling in a teapot. To successfully get rid of hard deposits, you will need knowledge of dosages, cleaning steps and rules for use in different types devices.

For a regular enamel teapot

Such specimens are less and less common in modern kitchen interior... But, of course, they continue to buy, because they are much cheaper than their electric counterpart. It is quite easy to care for an enamel teapot. The main thing is to do everything in a timely manner.

Vinegar

1. Fill the kettle with a solution of two parts water and one part vinegar. Bring to a boil and cool naturally.
2. Then drain the water, rinse the dishes abundantly.
3. If the sediment has not completely disappeared, repeat the procedure.

To boil the kettle from limescale with vinegar and not poison yourself with caustic steam, you need to open the windows while working and put on a protective gauze mask. And before using the kettle, you should boil it again clean water"Idle" to eliminate the specific vinegar aroma.

Lemon acid

1. Fill the kettle with lemon water at the rate of 10 g of "lemon" per liter of water.
2. Boil.
3. Leave the hot solution for several hours.
4. Pour out, thoroughly rinse off the lime grains.

A store-bought product can be replaced with lemon: cut into pieces and boil for ten minutes.

Soda

1. Boil a soda solution diluted in the following proportion in a kettle: two tablespoons of baking soda per one liter of water.
2. Wait until it has cooled down and remove soft deposits with a sponge.
3. If the descaling quality is not satisfactory, repeat twice.
4. This procedure can also precede the vinegar cleaning.

For electrical appliance

The electric kettle is very easy to use. Heats water quickly and almost silently, looks very aesthetically pleasing and modern. Irreproachable appearance such a kettle also requires internal cleanliness. Heating elements are especially important for regular maintenance. It is more convenient to clean a kettle with a disc heater than with a spiral one, reminiscent of a Soviet-era boiler. In addition, the first is more durable and heats the water faster. How to clean effectively Electric kettle from scale? What methods are suitable for devices made of different materials?

From glass

1. Boil water with a couple of tablespoons citric acid and the same amount of soda powder.
2. Let it stand for up to 20 minutes.
3. Wash off the natural acid-base composition.

Vinegar will help you to successfully remove scale in an electric kettle made of glass. Everything is extremely simple: open a window, boil the water and only after turning off the electrical appliance, pour two or three tablespoons of food vinegar into boiling water, cover kitchen towel until it cools completely. Control to shine metal surface the heater is not darkened. Rinse abundantly running water.

Stainless steel

1. Pour full kettle water (standard capacity - 1.7 liters).
2. Add a couple tablespoons of baking soda and bring to a boil.
3. After cooling, remove the white flakes with a soft washcloth.
4. Rinse thoroughly.

A stainless steel kettle is less prone to lime build-up. Nevertheless, a few more tips will be useful on how to quickly get rid of scale in a kettle made of such material. So, in a container you can boil a pickle from pickled cucumbers or tomatoes. Cleaning with apple or grape vinegar is also recommended - a glass of the product is poured into a boiled liter of water and left for half an hour.

From ceramics

Beautiful painted ceramic teapots, although very durable, require careful and careful handling. There are no specific recommendations for cleaning plaque, so choose one of the recipes above.

Remember the safety measures while working with boiling water and folk remedies. This is important because, according to reviews, ceramic teapots are quite weighty, keep warm for a very long time and have rather uncomfortable, very hot handles.

Made of plastic

Such an electrical appliance is the cheapest, lightest and most unpretentious. It will be as good as new if you clean it with any product you have on hand. You can also try and evaluate a peculiar way: boil water with apple peelings in a saucepan, let it brew a little and pour into an electric kettle. After a couple of hours, pour the "compote" into the sink and rinse the cleaned dishes with water.

Neglected cases, if the plaque does not go away

Don't know how to remove heavy limescale deposits in your kettle? The neglected cases will be "cured" by the following method, which consists of six simple steps.

1. Add three tablespoons of baking soda to a kettle with boiling water.
2. After half an hour, boil again and pour out immediately.
3. Collect fresh water and now add a couple of tablespoons of vinegar.
4. Boil the solution again and pour out half an hour later.
5. Remove the resulting friable mass with a soft sponge.
6. Rinse well so that no vinegar smell remains.

Does the Coca-Cola method work?

Salt deposits of calcium and magnesium dissolve under the influence of citric, acetic, orthophosphoric acids. The latter, H3PO4, is part of the popular Coca-Cola drink. To descale the kettle with Coca-Cola, you just need to pour 0.5 liters of the drink into the appliance (this is enough to completely cover the heater). In 15 minutes, soda will remove light deposits without boiling. You can consolidate the effect by boiling this sweet flavored liquid in a kettle and simply rinsing well with water at the end.

This unusual way suitable for a teapot made of glass. And for plastic, stainless steel and ceramics, exclude drinks with dyes, they can pigment the walls of the appliance. Try boiling plain sparkling water.

Practice shows that The best way to remove limescale, it is to clean the kettle from limescale with citric acid, boiling water with a couple of tablespoons of "lemon". It turns out cleaner and cheaper than using Coca-Cola, and also without the pungent smell, as in the case of using vinegar.

"Options" for descaling

Interestingly, there are ways to not only descale your kettle, but also how to prevent it from forming. To do this, you just need to select a device with additional "options". Inside some models (although they are more expensive), cleaning cartridges are installed that filter and heat the water at the same time. There are also teapots with gilding on a spiral, the function of which is to protect the part from hard deposits and corrosion. But the most "advanced" users recommend installing an electromagnetic water converter at home. So in one fell swoop you can solve all problems with increased water hardness and protect not only the kettle from scale, but also washing machine together with a water heater.

Print

Naturally, after active use, the kettle eventually becomes overgrown with a layer of scale, which not only looks unpleasant on the walls of the household device, but also gets into a mug with boiled water, and, accordingly, into the human body. Here a completely fair question arises - is it necessary to get rid of this annoying scale at all, well, it is present and okay! In fact, this phenomenon is harmful to humans, if you constantly use water with flakes of scale, over time you can earn stones in the genitourinary system, and it is also likely that osteochondrosis and gout can develop. Therefore, you need to get rid of this misfortune, so today the "Comfort in the House" website will tell you how to descale the kettle. We will tell you how to clean a regular kettle designed for heating on a stove, as well as their electrical counterparts. By the way, we told earlier, come in and study.

Scale on dishes is formed by boiling running water, which is rich in salts. After the boiling process, the salts contained in the water break down into constituent parts, namely - carbon dioxide and sediments, which, in turn, are not subject to decay and simply settle on the walls of a particular dish, forming a deposit. And plaque, in turn, is a whole spectrum of salts, substances harmful to the human body and insoluble metals.

Types of teapots prone to lime scale formation

Scale forms on containers designed for boiling water, respectively, these can be kettles designed for gas stove, electrical panels, as well as thermo pots and electric kettles. Kettles for the stove can be metal or enameled, and their electric representatives can be ceramic, glass, plastic or metal. The latter can be equipped with an open heating element (spiral) or closed. An open spiral during the operation of the dishes is capable of accumulating layers of scale on its surface, which is difficult to remove in the future, but also electric kettles equipped with heating elements closed type also capable of accumulating plaque on the walls and bottom. So we can say with confidence that any dishes in which water is often boiled (gas or electricity), and which is not washed by hands as often as it is done with pots and other household utensils, can form growths on the walls.

How often should the kettle be cleaned?

Naturally, it all depends on the water that you use, so let's say with filtered water, plaque may not appear very much long time, but even in this case, it is better to clean the dishes every 4-5 months. If you use simple running water, without filtration, then it is better to clean the kettle once a month. For such periodic cleaning, it is very convenient to use citric acid in a sachet. Just pour a tablespoon of acid into the kettle, pour water up to the maximum mark and turn on the boil mode.

How to descale your kettle quickly and easily

We clean the kettle with citric acid

Method will do for ordinary metal teapots for stove and all types of electrical products.

It does not follow apply in enamel teapots.

The advantages of the method: perfectly copes with its task, it removes scale quickly and effectively.

The disadvantage of the method is the fact that old multi-layered growths are not susceptible to acid.

How to carry out the procedure:

You need to take a sachet of citric acid and pour its contents into a kettle. You can adhere to the calculation of 1 tablespoon of "lemon" for 1 liter of water. Pour water here and boil, after the first boil, you can leave the kettle with liquid to cool down, and then turn it back on for boiling. It remains to pour out the liquid with floating flakes of plaque, and rinse the product thoroughly under running water. If plaque remains in some places, you can try to clean it off with a sponge, use only the soft side of the sponge so as not to scratch the walls of the product. Well, now you also know how to descale the kettle with citric acid, there is nothing complicated here.

Citric acid for cleaning the kettle.

Teapot cleaning soda

Method will do for all types of teapots (electric and simple).

Advantages of the method: affordable, safe for health, helps to get rid of old growths.

Disadvantages of the method: soda, due to its abrasiveness, can lead to scratches on the product.

How to carry out the procedure:

Pour baking soda into the dishes to be cleaned. You can stick to the calculation of 1 tablespoon of baking soda per 1 liter of water. Pouring in here cold water, put on the fire or turn on the kettle in the network, wait for the water to boil. After boiling, leave to cool completely, turn on again to boil. After that, the water can be drained and walked over the surface with a soft sponge, then thoroughly rinse the product with running water. Here is the answer to the question - how to remove scale in a teapot with soda. Everything is very simple, fast and effective!

Soda for cleaning the kettle.

We use potato or apple peelings

Method will do for all types of teapots (metal, enameled, electric).

The advantages of the method: absolutely accessible.

Disadvantages of the method: will not cope with old growths.

How to carry out the procedure:

We put clean (washed) peelings from potatoes, apples or pears into the kettle, fill with water, and bring to a boil. We leave for 1-1.5 hours and drain the water, you can walk along the walls with a soft sponge. This method is suitable for removing small plaque; you should not expect miracles. By the way, the process of descaling by this method consists in the separation of acids from the purification.

Peeling potatoes or apple to clean the teapot.

Descale using lemon

Method will do for various electric kettles and ordinary metal ones.

It does not follow use in enameled products.

The advantages of the method: does an excellent job of removing plaque.

How to carry out the procedure:

We take a large lemon, cut it into circles, put it into the product to be cleaned, pour water here to the maximum mark, and boil it. If you clean the kettle, you can wait for the boiling process, then reduce the heat and leave to simmer for about 20-30 minutes. In the case of electric utensils, after boiling is complete, leave the water until it cools completely, then boil again and drain the liquid, rinse with water and walk along the inner walls with a soft sponge.

Lemon for cleaning the teapot.

Remove plaque in a teapot with vinegar

Method will do for metal and enamel teapots.

It does not follow use in electrical appliances.

The advantages of the method: after several cleanings, even old plaque marks are removed.

Disadvantages of the method: acrid, unpleasant aroma, which, moreover, takes a long time to disappear.

How to carry out the procedure:

Pour water into the kettle, add vinegar here, you need to act at the rate of 0.5 cups of vinegar per 1 liter of water. We put the dishes on the fire and wait for the water to boil, a pungent smell will appear in the process, you need to be patient. After boiling, turn off the gas and leave the liquid in the kettle until it cools completely, then you can boil it again and immediately drain the water. The walls can be cleaned with a soft sponge and, with particular care, rinsed several times with running water. So we told you how to descale a kettle using vinegar, as you can see, there is nothing complicated, unless the aroma is not very pleasant, but the main thing is the result, right ?!

Vinegar for descaling the kettle.

We clean the kettle with soda and vinegar

Method will do for tiled metal and enamel teapots.

It does not follow use in electrical products.

The advantages of the method: affordable, effective.

Disadvantages of the method: acrid, haunting aroma.

How to carry out the procedure:

We fill the kettle with water, add soda and vinegar here. You should proceed at the rate of 0.5 cups of vinegar and 1 tablespoon per 1 liter of water. We put the dishes on the fire and bring to a boil, wait for it to cool down, boil again and drain the water, walk along the walls with a soft sponge and rinse with running water. Well, you have learned how to descale a teapot with soda and vinegar.

Vinegar and soda for cleaning the kettle. from traces of scale.

How to clean a kettle with soda - Sprite, Coca-Cola, Fanta

Method will do for different tiled teapots.

It does not follow use for electric kettles.

The advantages of the method: available and quickly removes build-ups.

Disadvantages of the method: colorants in the beverage can stain the product from the inside.

How to carry out the procedure:

Pour any of the listed soda into a kettle, put the product on the stove, and wait for the liquid to boil. After boiling, turn off the heat, and leave the product on the stove for about 30 minutes. Then pour out the liquid and walk along the walls of the dishes with a soft sponge, then rinse it thoroughly with running water.

Sparkling sweet water for teapot cleaning.

We use soda, vinegar, citric acid

Method will do for ordinary metal teapots.

It does not follow use in electric kettles.

The advantages of the method: effectively removes even old limescale.

Disadvantages of the method: acrid odor.

How to carry out the procedure:

All cleaning will take place in three stages. The first stage: pour water into the kettle, add a tablespoon of soda, boil, pour out the water. The second stage: pour in water, add a tablespoon of "lemon", boil, drain the water. The third stage: pour in water, pour in 0.5 cups of vinegar, boil and drain the water. We go along the walls of the dishes with a soft sponge. This method is ideal for old limescale deposits.

Soda, vinegar, citric acid to clean the kettle.

Use of chemicals

Method will do for all types of teapots (according to the instructions).

The advantages of the method: perfectly fights old limescale traces.

Disadvantages of the method: chemistry, it is chemistry.

How to carry out the procedure:

From the most popular means I would like to highlight "Antinakipin", "Topper", "Cinderella" and "Top House". According to the instructions, we pour water into the kettle, the agent is added to it, then the liquid is boiled once or twice, drained, and the dishes are thoroughly washed with water.

Chemicals against limescale in the kettle.

How to prevent limescale build-up in your kettle

1. Avoid using hard water from an ordinary tap, it is better to install a tap with a filter and enjoy purified water.
2. Bottled water can be used as an alternative to running water.
3. If it is not possible to install a filter, settle the water in the jar, and then pour it into the kettle.
4. Pour out unused water each time, i.e. before each boiling, it is better to pour the renewed water.
5. It is necessary to rinse the kettle after each use, or before use.

Well, we told you how to descale the kettle at home using quite affordable tools. You just have to choose a cleaning method for yourself, carry out the cleaning procedure for a conventional or electric kettle and enjoy the result!

Hello dear readers! Today we will struggle with one not very pleasant thing - scale in the teapot.
Now there are teapots in every house different forms and firms, conventional or electro. But regardless of the type, scale appears in all of them. Of course, we try to purify the water with filters, however, they do not always cope well with our water.
Scale is gradually formed and, of course, with it, you need to fight. It was about how to get rid of scale that I wanted to tell you. But before we fight, let's figure out where this scale comes from.

Why scale forms

If you look inside the kettle, you will see scale on the walls, and if you have an electric kettle, then it forms on heating elements that come into contact with water.

Scale is caused by the salts in the water. The harder the water and the faster the scale forms. And no matter how good a filter you put on, the salt will still remain in the water.

Why scale is dangerous

Of course, many people think that scale is not worth fighting. But in fact, scale is bad for the kidneys and urinary system. In addition, scale leads to premature breakdown of electric kettles and destruction of enamel in conventional ones.

That is why, right now, look into your kettle and check if there is scale there?
And if it is, then you need to immediately start to fight it.
To get rid of limescale there are many different ways, the main thing is that after you get rid of the scale, do not forget to boil your kettle several times.
This will need to be done to remove any aftertaste from the descaler.

How to descale a kettle

1 ... How to descale a kettle with vinegar (metal kettle)

One of the most better means to get rid of scale, while the undoubted advantage of vinegar is that it is not toxic to the body. The kettle is filled with water and vinegar is added to it (100 ml for each liter), we boil for a quarter of an hour. After that, the scale will flake off, you will need to rinse well and
remove limescale residues.

2. How to descale an electric kettle with citric acid

Can be used for: plastic or electric kettles.
Cannot be used for: teapots made of metal and enameled.
Advantages: a great way - budget and effective.
Flaw: works well if there is a little scale.

Citric acid is always available in the kitchen, so this method is very simple. The main thing to remember is that everything needs to be done on time and the scale also does not need to be started.

You cannot use vinegar to remove scale from an electric kettle. To combat scale, we take citric acid. Do not forget about precautions and pour acid only into cold water!

We make a solution of 2 tsp. acid per 1 liter of water. Pour the solution into a kettle for several hours. If the scale is not strong, it will flake off or dissolve. And if it is strong, then you have to rub it. If this does not work, then the same citric acid solution must be boiled. After that, the scale will peel off and you only need to rinse the kettle and then boil the water 2 times.

3. How to descale a kettle with Coca Cola and Sprite

Can be used for: non-electric and enamel teapots
Cannot be used for: electric and enamel teapots
Advantages: the method is effective and can even cope with running scale
Flaw: Beverages contain dyes that can stain the kettle.

Probably each of us has heard about how easy it is to clean the kettle using cola or a sprite. Popular drinks will do an excellent job with this task. These drinks are also excellent at fighting rust and other problems.

Another plus of this method, because it can be shown to children. Then I think "interest" in sweet drinks in children
This is how it is done. First, you need to release a little gas so that the bubbles completely disappear, then pour the drink to the middle of the kettle and bring it to a boil. After that we wash it off.

4. How to descale the kettle with soda

4.1. How to clean the kettle from strong limescale at home

If your kettle is in a very neglected state. Then we proceed as follows: pour water and add 1 tbsp. baking soda, bring to a boil. Let cool, then pour out the water. Pour in a new one, add 1 tsp. citric acid and simmer for half an hour. We drain this water. Pour clean water and add 100 g of vinegar to it, after which we boil for half an hour. After such a "cocktail" even the strongest scale softens. If scale (for electro)

4.2. How to descale a kettle with soda (metal or enamel kettle)

Pour water into the kettle and add 1 tsp. soda, put on fire and boil for 1/2 hour. Then we wash the kettle and boil it a couple of times with plain water to get rid of the soda.

5. How to descale a kettle using brine

An excellent folk remedy for limescale is pickle from pickles or tomatoes. All thanks to citric acid. The application is also simple: pour the brine into a kettle, put it on fire and let it boil, let it cool, then wash it off.

6. For enamel and metal teapots only.

This method is also popular and without the use of acid, however, it is suitable only for weak scale. Take potato peelings, wash them off sand and earth. And then bring to a boil and leave for a couple of hours. After that, wash well.

How to descale a kettle video

Before telling how to remove scale from an electric kettle at home, you need to find out why it starts to form. The main reason is the very hard water and the calcium carbonate it contains. During boiling, calcium carbonate falls out in the form of a precipitate, which is distributed along the walls and bottom of the product, and lingers on the heating element (if we are talking about an electric kettle).

If the kettle is not cleaned in time, the deposits will slowly begin to flake off, as a result of getting into tea or coffee with water. Scale does not represent a strong danger to humans. But the very fact of its presence in the cup is not encouraging, and the taste of the drink can be greatly affected by this.

But for technology, deposits can be dangerous. If we talk about electrical devices, then, because of scale, they will start to work slower, while much more electricity will be consumed, and the noise level during boiling will increase. That is why it is so important to know how to descale an electric kettle at home so that you do not have to buy not very cheap electrical appliances once a year.

There are many ways to remove white bloom from the walls of an electric kettle, but not all of them should be put into practice.

For example, housewives often try to scrape off plaque. sharp knife... You can't do that!

Such measures can completely ruin the product or disable the heating element, the replacement of which is quite expensive. It is better to use either special anti-scale products, or use home “helpers”, which we will tell you about.

Limescale in the electric kettle

This product is ideal for descaling. Take about 100 g of citric acid, put it inside the kettle, add water to the mark and turn on the device. After the water boils, leave the kettle filled with the solution overnight, then simply drain the liquid with the dissolved pieces of scale. Repeat the procedure if necessary.

If not in the house, a lemon will help to cope - cut a few pieces into small pieces along with the zest, put everything inside the kettle and boil. At the same time, lemon juice will not only remove scale, but also flavor household appliances.

Everything is very simple here. To clean a standard kettle with a volume of about 1.5 liters, we need to take 400 ml of vinegar (6%), pour it into a container and top up with water to the mark. Boil the solution and let it sit for at least three hours for the vinegar to take effect. True, this method has one drawback - heated vinegar will emit a very unpleasant aroma, therefore it is better to open the vents in the kitchen.

Lemon acid
Vinegar

Sweet soda fights against scale - regular lemonade or Coca-Cola, which, by the way, helps with rust. Teapot descaling agents contain special acids that can clean even very stubborn stains. At the same time, you do not need to boil the soda - just pour it inside and leave it to settle there for 2-3 hours.

To remove any remaining limescale, simply gently wipe the inside of the appliance with the hard side of the washcloth and rinse the product with water several times. If you are going to clean the equipment white, it is better to buy a colorless soda that does not leave marks on the plastic.

What else can you do to descale your kettle at home? This will help you oxalic acid or ordinary sorrel. Just pour the selected ingredient into a container, fill it with water, boil and leave for several hours until the liquid cools down. True, this option is not suitable for light teapots, since stains may remain on the technique.

Now you know how to descale an electric kettle at home, but deposits also quickly appear on ordinary metal or enamel teapot... How to descale a regular kettle? Here you should use other means, since not all of the above methods are suitable for them, since there is a great chance of simply ruining the product.

Soda to help

Fill the kettle with water to the end, add about 1.5 tablespoons of baking soda and place the product on the stove, bringing to a boil. After bubbles appear, reduce the heat to a minimum and leave for 40 minutes, then wash the product, removing the remains of soda and deposits. Boil the kettle with clean water to remove even the smallest scale particles.

Anti-scale brine

One more folk remedy- pickle from cucumbers or canned tomatoes. The brine is very helpful, as the liquid contains a lot of citric acid, which is an ideal fighter against deposits. Just pour the brine into the kettle, boil the liquid and rinse the product after cleaning. If you notice rust in the teapot, you can also safely use the brine.

We use organic cleaning

If the layer of deposits is very small, you can use apple or potato peelers. Thoroughly clean the dirt from the cleaners, put it on the bottom of the kettle, fill it with water and boil. After the water boils, leave the kettle for a few hours, then rinse it thoroughly - no trace of scale will remain.

Brine
Cleaning

But what if the scale layer is so thick that the above means cannot cope with it? V in this case worth using powerful weapon against deposits - a combination of baking soda, citric acid and vinegar.

The instruction is as follows:

1. Pour water into the kettle.
2. Add a spoonful of baking soda, boil the kettle and drain the water.
3. Pour water again, adding a spoonful of citric acid. At the same time, in this case, you need to boil water for at least 20 minutes.
4. We drain the water, pour in a new one and pour in 100 ml of vinegar. We boil the solution for about half an hour.

Water
Soda
Lemon
Vinegar

The procedures performed may not completely remove all the scale, but they will definitely make it soft and loose. You just have to remove its remnants with a washcloth and rinse the product thoroughly.

Is it possible to avoid the appearance of limescale - useful recommendations

Now you know how to descale your kettle at home. But is it possible to avoid the formation of deposits on equipment? Follow our simple guidelines:

• water should be drained after each use of the kettle - storing it in the kettle leads to faster formation of deposits;
• rinse the product constantly with warm water;
• try to use filters for water purification, if this is not the case, first settle the tap water for several hours;
• to drink delicious tea and coffee, try to buy distilled water.

An electric kettle is an almost irreplaceable household appliance. It makes it quick and easy to boil water for making tea or coffee. It does not need to be monitored, after boiling, it will turn itself off and will not waste electricity. But even the most modern electric kettle requires maintenance and regular cleaning.

The causes of limescale

The electric kettle seems to be a device that requires absolutely no maintenance. But if technology is not given enough attention, over time it can start to work less efficiently or even break down altogether.

The most common reason breakage is the accumulation of excessive deposits. They cover the walls and the heating element, reducing the heating rate of the water.

Scale in an electric kettle is salts and compounds contained in water and precipitated when heated. It is impossible to completely get rid of this phenomenon. But a set of care measures will allow using various means as rarely as possible.

It is important to understand that deposits on the bottom of a kettle are not only a cosmetic issue. They significantly reduce the rate of heating and, if ingested, can cause the formation of sand in the kidneys or aggravate an existing disease.

Current care

Correct daily care behind an electric kettle will allow global cleanings to be carried out very rarely. To minimize the deposition of salts, it is important to observe the following instructions:

1. The container should be cleaned regularly, preferably every evening. You just need to drain the water and wash the inner surface with a sponge.
2. Do not boil more water than necessary. Salts from the liquid left after heating in the kettle will thicken the layer.
3. Use purified water. This will save both the technique and healthier.

So that maintenance is not too laborious, and the household appliance lasts as long as possible, it is important not only to know how to descale in an electric kettle, but also to do it regularly. Thin layer deposits are much more susceptible to action and you do not need to use special means to remove it.

Virtually all acidic agents are effectively removed. For cleaning electric kettles, you can use both industrial compounds and improvised means.

Special means

They help to fight scale on the walls and heating elements of electric kettles ready-made formulations which can be purchased in the store in the department household chemicals... It is quite simple to recognize them, the manufacturer puts an image of the equipment on the packaging, the name usually corresponds to: "Anti-scale" and the like.

They should be used in strict accordance with the manufacturer's instructions, do not exceed the dosage and exposure time.

Usually the scheme is simple: the product must be dissolved in water in a certain proportion, poured into a kettle, boiled and left for a while. After that, wash the equipment and use it as usual.

The composition of industrial products contains several types of acids and excipients that successfully fight salt deposits. It is important to know how to clean the kettle so as not to harm the health of the family. You can also use the tools at hand that are in every home.

Lemon acid

As part of special means is an integral component. It can be used to clean equipment quickly and efficiently. And what is especially pleasant, such care will not cost much at all.

For one treatment, you will need 1 sachet of acid containing 25 g of the substance.

Follow the following scheme:

1. Draw a full kettle of water and add the contents of 1 sachet.
2. Bring water to a boil and turn off the appliance. Care should be taken as the solution may begin to foam when it boils.
3. Leave to work for 30 minutes. Then drain the composition.

The impact is based on chemical reaction converting citric acid to acetic acid.

After cleaning, thoroughly wash the equipment and boil clean water in it. This will help get rid of the smell. Repeat all manipulations if necessary.

Food vinegar

The food vinegar found in every kitchen is acetic acid, diluted to a safe concentration. It can be used to clean the kettle quickly and efficiently.

Pour vinegar solution into the kettle (1 part 9% vinegar to 2 parts water). Bring the composition to a boil and turn off the device. Leave to cool completely. Then drain the active compound and thoroughly wash the container with a moderately hard sponge.

The acid will soften the scale and can be easily removed.

After cleaning, the technician must be thoroughly washed and boiled clean water several times. This will help get rid of the specific smell of the acidic composition.

Baking soda

Soda - pretty active substance, which can remove even a large layer of limescale. It is worth turning to it if the milder effect does not bear fruit.

Pour water into the kettle and add a tablespoon of soda to it. Boil and leave the composition to act for several hours. The alkaline solution will soften the deposits and can be removed with a sponge.

If this action is not enough, you can repeat the procedure or, instead of soda, add citric acid to the water at the rate of 1 sachet per 1.5 liters of water. Boil the solution and leave for an hour.

After that, it is traditional to clean the surface with a sponge.

Carbonated drinks

Most carbonated drinks contain citric acid. It is she who will help to cope with scale in the teapot. The method of removing deposits with the help of drinks is passed by word of mouth and is considered effective, but it also has features:

1. Colorless drinks should be chosen. Dyes, especially bright ones, can leave stains that are more difficult to clean than salt deposits.
2. Partially remove gas from liquid before use. Otherwise, in the process of boiling, the drink will foam, pouring everything around.
3. The drink should be poured into a kettle, boiled and left to act. In just an hour, the scale will begin to come off in layers and it can be removed mechanically.

Before cleaning an electric kettle, it is important to warn all family members about this. The fluids and formulations used for such work are colorless and can be confused with ordinary water. A few sips of citric acid solution will not bring significant harm, but negative emotions guaranteed.

To keep the electric kettle irreplaceable assistant, it should be cleaned regularly to avoid the formation of a significant scale layer. It is enough to boil the acid composition once every few weeks, and heating elements technology will shine with purity.