always pleasant, because there a person puts himself in order, so many housewives are interested in how to clean an acrylic bath at home. I do not want to single out one housewife over another, but the conditions for caring for metals (steel and cast iron) are different from the conditions for caring for acrylic. Be that as it may, such a polymer turned out to be a very successful find for the production of sanitary ware, both technologically and economically.

What is an acrylic bath

Cast Acrylic Rectangular Bathtub

Before talking about cleaning products and detergents, it will not be superfluous to understand how and what acrylic bathtubs are made of. Perhaps for some, such a question will seem strange, but, firstly, in this case, special sanitary acrylic is used, and, secondly, there are three ways to manufacture such plumbing fixtures, although at first glance they cannot be distinguished. They are classified as:

1. Block.
2. extruded.
3. Cast.

Acrylic block baths

Such products are made by pouring into a glass mold and polymerizing under high pressure. And if a little more specifically, then a glass mold consisting of two blocks is assembled into one whole and a compound in the form of a powder is poured through a hole specially created for this purpose. Then the workpiece is placed in an oven, where polymerization takes place, and then gradually cooled until it cools completely. The result is a very durable product that is not so easy to break or scratch.

Extruded acrylic bathtubs

The best option is extruded bathtubs, which are made from ABC plastic, that is, this is the base that is heated up and then filled with liquid acrylic. The result is a bathtub that is the most resistant in the world to deformation and mechanical damage (acrylic products are implied). This can be cleaned even with abrasive detergents.

cast

This is a budget option. Liquid acrylic is poured onto a polished sheet of metal according to the required thickness. Then the resulting pancake falls under the press of the desired shape and it squeezes the finished copy out of the matrix. Such baths are extremely unstable to mechanical damage and deformation, they are not quite easy to care for, as they are very easy to scratch, but it should be said that they are in the greatest demand in the plumbing market.

Cleaners and detergents

In the previous sections, it was briefly described what kind of acrylic and how bathtubs are made. This is necessary so that you understand the degree of danger of surface damage when sanitizing the container with your own hands. But, as you already understood, the cast bath can be called the most “vulnerable”.

What can not be washed

Prolonged exposure to boiling water on acrylic will cause it to deform

There are a number of means by which it is not only undesirable, but even prohibited, as this can lead to a loss of surface gloss, deformation, leaving scratches, stains, and so on. It makes no sense to name such drugs specifically, it will take a lot of time and space, but just when choosing any liquid, pay attention to whether it contains:

• chlorine;
• acetone;
• solvent;
• petrol;
• acid;
• powders with large abrasive particles;
• boiling water.

In this case, you can hear objections like: “I tried and nothing happened”, “So now, keep it like a jewel”, and most importantly: “So what then to wash ?!”. Firstly, if you just spill solvent or boiling water, then absolutely nothing will happen, that is, with such means you can simply clean a small speck. Secondly, we are talking about the long-term effect of such preparations, which can be when washing the entire bath, that is, with a complete treatment. But what and how to care for her, we will consider further.

Chemical products that can be purchased at the store

Dry and liquid biodegradable household chemicals Frosch

Today, the question of how to clean an acrylic bathtub at home is not a dilemma - the modern plumbing and accessories market presents a lot of preparations in dry and liquid form for this purpose. But when purchasing any tool, one should not forget that they are all individual and there are no general rules for their use. Whether it is a gel, powder or granules, the packaging must have instructions in Russian or Ukrainian, even if it is German, Italian or Polish production.

The fact is that the manufacturer prints such a manual for the buyer, who will sell it with a license. If you do not find instructions there in a language you understand, then it is better to refuse such an acquisition. You can’t just focus on the brand, as the packages can be very similar, but the drugs are designed for different purposes. Therefore, you can buy some kind of product that contains substances that are harmful to acrylic.

Here are some of the products that you can buy in stores that sell household chemicals, plumbing, or just in hardware stores:

• bass;
• Ravak;
• Team Pro;
• Chister;
• Cinderella;
• Acrylan;
• and others.

All these care products can be used without any doubt, in addition, they are used not only for acrylic, but also for cabinets with plastic foil, steel and cast iron bathtubs.

Video: Cleaning the bath from a housewife

Home Cleaning Products

Lemon acid

Some owners of acrylic bathtubs, and indeed any plumbers in general, do not recognize or simply do not want to use powder or liquid materials from the manufacturer, that is, factory chemicals and prefer home methods. Here is some of them.

In order to get rid of stains, yellowness or rust, citric acid is used (you can also use fresh lemon, but this is not very convenient), soda, vinegar, ammonia, and so on:

• Take a little more than half a bath of hot water, pour 100 g of citric acid into it and leave it until it cools down (this is 2-3 hours). After that, drain the water and wipe the surface dry with a soft cloth. Such prophylaxis should be done once every six months and there will be no yellowness.
• Various stains from the acrylic surface will help to remove toothpaste with a whitening effect. Spread it on problem areas, rubbing it with your fingers, and leave it for 10-15 minutes. Rinse off with warm water and pat dry.
• Most contaminants are removed with a solution of soda and laundry soap, just make a thick concentration. Apply this mixture on the problem area for 20-30 minutes. Then rinse with warm water and pat dry.
• A solution of baking soda and soap will get rid of most stains. Dampen a soft cloth in it and wipe the desired area for several minutes. After rinsing, it will clear up.
• Rust is well eliminated with a mixture of ammonia and hydrogen peroxide in a ratio of 1/1. Apply this solution to a sponge (foam rubber) and wipe the problem area. If the rust is not old, then the effect will be in just a few seconds.
• Severe contamination can be eliminated with one liter of 9% table vinegar. Take a little more than half a bath of hot water and pour it in, leaving it overnight. In the morning, flush the water and rinse the bath well with water, then wipe dry.

Video: Cleaning the bathroom - life hack

Prevent pollution

Flow (cartridge) filter

A few more words about violations that occur through no fault of yours and after which a plaque will definitely remain on the surface of the bath. In our water supply networks, water almost always does not have proper purification, or it is simply hard, that is, with a high content of salts and alkali (we have soft water only in wells and wells). 90% of the problem of pollution of the surface of the bath lies precisely in low-quality water, but this can be countered (it is better to prevent the problem than to deal with its consequences).

You can use a single filter for this, although I would even recommend a triple flow filter, as in the upper image. It is cut in after the water meter, if one is on the pipeline, or simply in front of the collector. Cartridges can be purchased at any store selling plumbing. Replacement is made within 1-2 minutes as needed, that is, it will be seen by the color of the filter.

Conclusion

Do you understand how to clean an acrylic bath at home? As you can see, it’s not difficult at all, and most importantly, don’t put it off “for tomorrow”. Regular care will save you from problems, but even if it happened that the moment was missed, the situation can always be corrected.

Acrylic bathtubs have won the love of hostesses all over the world with their smooth surface, glossy sheen and flawless whiteness. Lighter, plastic models of various shapes and sizes have successfully replaced clumsy cast-iron washing containers.

Happy owners of acrylic sanitary ware often wonder how to wash the font in order to preserve the original appearance of the product for a long time. In fact, care should be taken in this matter, since not every detergent is suitable for mechanically fragile plastic. In this article, we will tell you how to care for an acrylic bathtub so as not to spoil it.

Advantages of acrylic

Many homeowners are concerned about how to clean an acrylic bathtub, as they have heard about the capriciousness of plumbing fixtures made from this material. In fact, acrylic products are much easier to care for than steel or cast iron wash basins.

Ease of cleaning is due to the following properties of the polymer:

• Low porosity. There are practically no pores on the acrylic surface, so it does not absorb dirt, but repels them, so that daily cleaning of the acrylic bath can be done simply with warm water and a soft cloth.
• High smoothness. The smooth surface of acrylic does not allow dirt and harmful microorganisms to clog into the structure of the material, so it is easy to clean the bowl even without the use of abrasive detergents.

Note! Manufacturers often talk about the "self-cleaning effect" that high-quality acrylic products have. This term means that their ugly surface repels dirt, so you have to clean the bath less often. In most cases, you can wash the acrylic bath with warm water or soapy water.

Typical pollution

Since polymer plumbing fixtures have replaced cast-iron and steel ones relatively recently, the question of how to clean an acrylic bathtub at home is relevant for many responsible housewives. Acrylic products repel dirt, however, intensive use of the device leaves its mark, which worsens the appearance and hygiene of the wash container. Most often in the process of using the bath, the following pollution occurs:

Important! Properly caring for plumbing so that old stains do not appear on it is much easier than washing an acrylic bathtub. Therefore, it is important to regularly rinse the inside of the bowl with running warm water, and then wipe it dry with a soft cloth after each use.

Many housewives do not know how to clean an acrylic bath, so they use completely inappropriate products that corrode, scratch or otherwise damage the product. Improper care is the most common cause of premature wear of acrylic sanitary ware. Manufacturers recommend that you refrain from using powders for cleaning such bathtubs, instead it is better to use a delicate, gentle washing gel or cream. To care for acrylic sanitary ware, 4 categories of cleaning products are used:

Please note that if you are not sure how to wash an acrylic bathtub, it is better not to risk it in vain. It is better to try what effect the composition will have on a small area of ​​\u200b\u200bthe surface, and only after that continue cleaning the product.

"Forbidden" tricks

High quality acrylic plumbing is just a godsend for modern housewives who save time on everything they can. With proper use, it retains whiteness and shine even without the use of special tools. However, washing an acrylic bathtub with the wrong household chemicals can ruin the product. Manufacturers recommend not to use for care:

Prevention

An important measure to combat contamination on the surface of acrylic hot tubs is proper care in compliance with the manufacturer's recommendations. Properly using the product is much easier than washing an acrylic bath at home. Compliance with these 4 simple rules will significantly shed the life of plumbing:

Remember that using a low-quality or inappropriate acrylic bath cleaner, you are not getting rid of pollution, but of expensive plumbing!

Video instruction

We will send the material to you by e-mail

A beautiful and elegant bathroom needs proper care

Acrylic features are such that it is wear-resistant and repels dirt in itself, which makes the product especially attractive. But the downside is that the surface is prone to scratches.

If you know how to care for an acrylic bathtub, then it will remain white for many years. A big role is played by daily cleaning after use. Constant care of the surface of the bath is carried out with a soft sponge or cloth. A suitable agent is applied to them and the product is wiped. After that, it is important to rinse it and wipe it dry. If the water is soft, then such a daily procedure will ensure the whiteness of the bathroom for a long time.

How to clean an acrylic bath from household chemicals at home

The abundance of household chemicals for cleaning different surfaces is often confusing. How to clean an acrylic bath at home from the entire range of cleaning products provided by the market?

Qualitatively work Acrylan, Cillit, Sarma, Acryl Net, Star Acrylat. Any of these products is applied to a sponge or napkin, which is used to wipe the walls of the container, and left for several minutes. After a while, the cream-gel is washed off with warm water. It is important not to forget to wipe everything dry!

Many people wonder if it is possible to wash an acrylic bathtub with Domestos: if you do not violate the cleaning rules, then you can. Domestos are not left on the surface for a long time due to the strong acids in the composition. It takes 5-10 minutes, then rinse with a sponge. If scratches suddenly appear, then they are treated with mastic or furniture polishes.

How to wash an acrylic bath from improvised means at home

If there are no purchased products, then how to clean an acrylic bath at home? It is not forbidden to wash the surface with dish detergent, liquid soap or shower gel. But citric acid and vinegar are excellent.

Citric Acid and Apple Cider Vinegar for Acrylic Bathtub Cleaners

We will tell you how to clean an acrylic bath at home with citric acid or vinegar.

Citric acid can be diluted with water so that the concentration is minimal. The filled bath is diluted with a solution of citric acid. 50 liters require 1500 ml. The solution is made from 2 tsp. hot water and 1 tsp. acids.

If you happen to have several lemons, then they can bleach the entire surface by simply wiping it with chopped fruit. The juice is not washed off for 8 hours. Acetic acid or apple cider vinegar perfectly destroys limescale and yellowness. Surfaces are treated in the same way as with a solution of citric acid in the same proportions, but the water is not drained for 10 hours.

Baking Soda and Toothpaste for Acrylic Bathtub Cleaners

Is it possible to wash an acrylic bathtub with soda? Definitely not. Acrylic does not tolerate any powdery substances - they leave behind small scratches. Although soda is able to cope with rust, it will ruin the surface after itself.

Toothpaste with a whitening effect can remove darkening: rub the stain with the paste, wait 5 minutes, and then wash it off with water.

Related article:

How to wash windows quickly and without streaks. Where do stains on glasses come from, folk remedies, household chemicals, procedure algorithm, necessary tools and devices - read in the publication.

How to wash an acrylic bath with a certain type of pollution

We will learn how to wash an acrylic bathtub if such impurities as lime, rust, yellowness appear on it.

Yellow spots and rust

Seeing rust on acrylic, many housewives are frightened and worried about how to clean the acrylic bath. Their fear is justified: Acrylic surfaces are easily damaged in an attempt to defeat rusty walkways.

Remove rust "Sunklyn", "Mr Chister" or means Triton. The sight of a yellowing bath can upset any owner. Yellowing can occur due to incorrectly selected cleaning agents, the solid age of the product or excessive water hardness. The “adult” container is updated by bleaching the liner, and the hardness of the water can be slightly softened with special products added when bathing. Acrylic care products provide for the problem of yellowing: they are applied to the entire surface, and then washed off after a while.

Limescale, sealant and adhesive

Limescale should be washed immediately: it can be removed with a soft cloth and lemon juice. How else to clean the acrylic bath from lime: fill the entire container with warm water and add at least 1.5 liters of a 7% solution of citric or acetic acid to it. Mix everything and leave for 12 hours.

The water is drained, the container is rinsed and wiped dry. The procedure is carried out once a year.

Important! It is impossible to tear off the sealant or glue - there is a high risk of damaging the coating.

From chemical solvents with silicone sealant can handle: Quilosa, Penta-840, CRC Gasket Remover.

Related article:

How to clean a mirror without streaks in different ways: with water, various folk remedies, household chemicals, an antistatic napkin, how to remove limescale and traces of stickers and markers - read in the publication.

Acrylic whirlpool bath care

Caring for acrylic whirlpool tubs includes cleaning the nozzles from soap and salt deposits. To cope with this problem, 20 liters of a weak chlorine solution are poured into the hydromassage system, after which it merges safely.

Often, housewives are faced with the problem of how to wash an acrylic bath at home? The walls and bottom are sensitive to abrasive substances, so a product chosen at random will not work. The purpose of the article is to talk about the basic rules and methods of cleaning, to give practical advice and recommendations:

• characteristics of cleaning products, their features;
• cleaning options - what are the main differences;
• Tips for taking care of and extending the life of your bathtub.

Acrylic is a wear-resistant material, a type of plastic derived from a group of synthetic derivatives of one of the unsaturated organic acids.

What you need to know about the characteristics of acrylic bathtubs before cleaning them?

Before answering the question of how and how to wash an acrylic bath, let's talk about the material of manufacture. Acrylic has a dirt-repellent effect: microorganisms, bacteria and fungi do not develop in the bath. The material is durable and impact resistant. A noticeable minus is that it is easily scratched and subject to wear.

The main difference is exposure to abrasive and chemically active components. Like plastic, substances with high alkalinity or acidity lead to degradation of the structure, and abrasives scratch the surface, leaving deep grooves.

When washing, it is important to be careful. Do not buy abrasive compounds, pastes with ammonia, chlorine, acids and alkalis. Powdered products are harmful, leaving damage and scratches. Brushes (metal and hard bristles) are contraindicated for use.

Which brushes and sponges to use

For cleaning use soft cloths or sponges. Use and tissue napkins. They are moistened in special solutions (we will talk about them later). After washing, it is wiped dry and polished.

If there is no opportunity to buy a special sponge, use rags with soft pile, for example, from microfiber. If necessary, use a regular cloth - the main thing is that there are no abrasive agents on the surface.

How to clean an acrylic bath at home: TOP 5 ways

For you, we have selected several options for how to clean an acrylic bath at home:

• detergent;
• lemon acid solution;
• vinegar;
• soda;
• toothpaste.

Detergents

An adequate and simple way is the use of special detergents. Their cost rarely exceeds reasonable limits. For proper selection, make sure that there are no abrasives. Often on the packaging of goods indicate the composition, or make special notes.

Acrylic bath cleaner used for small and large cleaning volumes. Spots that appear are removed with:

• cif- for baths, sinks, tiles and toilets. The composition does not contain abrasives, which is safe for acrylic. An acceptable price and a variety of types of composition (spray, paste, cream) make it a popular product among buyers. After cleaning, a film appears that protects it from further formation of limescale.
• Acrylan- foam for bathtubs and showers. When using, leave only until completely dry, without rinsing.
• Bass- Cleaning agent, used daily. Sold in liquid form.
• Team Pro- an environmentally friendly product, helps to fight unpleasant odors, is effective for severe pollution.
• Cinderella- a popular substance, emits a pungent odor, therefore, when spraying (sold as a spray), wear gloves and a special mask.
• Chister- composition for quick removal of dirt, promotes the decomposition of divorces and fatty contaminants. Consists of a polymer that protects against fungi.

In addition to those listed, allowed Use of the following is at your own risk:

• Sarma;
• SanClean;
• Luxus professional;
• L. O. C. Plus;
• Cillit;
• Acryl-Net;
• Star-Acrylat;
• Triton;
• RAVA K;
• Panny.

Citric acid solution

Citric acid refers to organic acids with a relatively high pH - an indicator of the solution. Materials perfectly clean off plaque, grease and other contaminants. Organic acid is especially effective on ordinary substances, therefore it is easy to clean off fat with its help. In its pure form, it adversely affects acrylic, because mix into solution:

1. ⅔ fill with warm water;
2. Pour out half a liter of acid;
3. Stir the consistency and leave overnight;

The method is effective, but aggressive towards acrylic, and it is not recommended to carry it out more often than 0.5 years.

After standing for about 12 hours, the solution descends. It is worth stirring citric acid more thoroughly than vinegar - completely dissolve it for further precipitation. At the end, the structure is washed with a stream of water from the shower and wiped with a soft cloth. Rub for extra shine.

Apple vinegar

A practical substance, but it does not always have a positive effect on acrylic. The main feature is a low pH and high acidity. For the material, this factor is critical, especially in the presence of scratches. You must work quickly and accurately. The recommended method is to moisten a cloth abundantly in the solution, attach it to the pollution and pour water over it.

We recommend using the method at least once every six months.

For severe pollution:

• Prepare 9% vinegar in an amount of 1 liter;
• Fill two-thirds with hot water;
• Pour out the vinegar;
• Wait for the night;
• Rinse and wipe

Soda

Plaque removes ordinary soda. The composition has a high alkaline environment that breaks down fats and strong compounds. In most products, it is present in the form of compounds or in the usual form. There are two types: food and calcined.

Use the method every 3-5 months.

Baking soda is a weak alkali, soda ash is strong, with a powerful abrasive effect. Use only baking soda.

• Pour 2-3 tablespoons of baking soda into a bowl;
• Fill with a glass of water;
• Dampen the soft side of the sponge with the solution;
• Apply the mixture by blotting rather than rubbing;
• Rinse with water after 15 minutes and clean with a cloth.

Never use undiluted baking soda! It has a strong abrasive effect and will damage the case.

If you need to leave the surface in its original form, take distilled or filtered water. In some cities, tap water contains a large amount of calcium, which reacts with soda, which forms fine crumbs, similar to sand. Using water will get rid of it. The advice is also relevant for other cleaning methods associated with the use of chemically active substances.

Toothpaste

Acrylic came to plumbing from dentistry - it was used to line denture frames and make crowns, so cleaning the bathtub with toothpaste is quite acceptable.

The procedure should not be carried out more than once every two months.

Buy non-abrasive paste. The manufacturer may not indicate this on the packaging. Abrasive particles are like small grains of sand that clean plaque from teeth, but they will greatly damage the surface of the bath. Before use, squeeze a small amount of paste onto your finger and rub it - the sand is immediately noticeable.

• Apply the paste to a sponge or cloth;
• Wipe dirty surface;
• Clean with water;
• Grate to shine

Video: how to wash an acrylic bath

The video below provides detailed tips on how to wash an acrylic bath.

Consider the main ways to clean an acrylic bath:

Contraindications: what not to use when cleaning

A few words about how you can not clean an acrylic bath at home. We do not recommend using:

• Acetone- corrodes plastic, contributes to the appearance of holes.
• Abrasives- spoil the surface, leaving scratches and reducing the thickness of the enamel.
• A mixture of several components- creates the opposite effect, scratching the walls.

The appearance of acetone in the room should be completely excluded. The element is chemically active and acts as a solvent. Enough 10-20 ml for a dent on the surface of the structure.

Rinse off chemicals with cold water. High temperature increases the rate of reaction and damage to the surface will occur more quickly.

Detergent compatibility with acrylic surface

Is it possible to wash an acrylic bathtub with domestos or a mixture of substances? It is undesirable to mix with:

• Formaldehyde- they are not compatible with acrylic.
• Chlorine- its use forms pores, shortening the life of the product.
• Acetone, ammonia- corrode the walls.

Domestos, Sanox, Pemolux and Selit contain hydrochloric acid that destroys protection. Initially, it is bleached, but after it absorbs plaque, it gets dirty faster. Therefore, such detergents cannot be used.

White disinfection

An acrylic bath is a way to forget about the fungus forever, but it is not perfect either. The fungus does not appear on the material, but easily multiplies on plaque, fats and other organic substances with nutritious microflora. It is necessary to prevent the long appearance of pollution, and if they appear, periodically carry out a complete disinfection.

Fill the tub with water at room temperature;

• Add 2 liters of whiteness (7%);
• Do not touch for 10-15 minutes;
• Rinse off the water and dial again;
• Remove the remaining whiteness and drain the water;
• Wipe dry with a cloth.

Rules for proper operation

The bath does not require serious maintenance, but it is still necessary to follow the rules.

1. Periodic bringing plumbing in a decent condition in 5 minutes - after water procedures rinse with clean water. Acrylic does not absorb dirt, so this washing is enough.
2. Wipe down bath after use sponge with soapy water. Then dry to avoid streaks.
3. To remove scratches, there are restoration kits- They are sold in hardware stores.

To properly care for an acrylic bath, you need to purchase soft sponges and microfiber cloths. Also, when cleaning, it is necessary to use special products that will not harm the acrylic surface, which quite specifically perceives the effects of aggressive chemicals. Find out more about cleaning such a bathtub below.

Purchased cleaning products

For acrylic baths, detergents can be especially dangerous if they contain concentrated alkalis and acids, chlorine, ammonia. These substances can change the color of the bathtub, contribute to the appearance of small cracks and scratches, and roughen a smooth surface. Therefore, it is very important to choose the right cleaning agent:

• Acrylan. Foam is recommended as a detergent. With its help, you can remove various contaminants in the form of rust and limescale. The contaminated surface is wiped with a sponge, on which foam is applied, and after 10 minutes from the moment of treatment, it is washed off with water.

  The foam creates a thin protective layer that prevents dirt from settling on the surface of the tub.

• Sif, Vass. They are considered the most versatile means for gentle cleaning of plumbing surfaces, including acrylic bathtubs. They do not contain substances that can damage its surface. After cleaning with these products, the bath will shine with brilliance and whiteness, if there are no old dirt.
• Cinderella. It is recommended to wear rubber gloves and a mask when using the product, as an unpleasant odor is emitted when spraying. It should be kept on the surface for about 7-10 minutes. Then rinse with a shower and wipe with a sponge or microfiber cloth.
• Chister. Its advantage is that it contains an acrylic polymer. When processing the surface, it covers it like a film, repelling various types of contaminants, and the bath will shine with brilliance and whiteness for a long time. It will not accumulate bacteria and fungi. A surface treatment of 5 minutes is sufficient.
• Team Pro. A special product for acrylic baths, which not only gently cleans various types of dirt, but also eliminates odors, and also creates a reliable protective layer against other dirt.
• Bon Professional. It is a reliable cleaner for plastic products. It is applied to a cloth and wiped the surface of the bath. It is recommended to wait a few minutes and rinse thoroughly with clean water. It forms a special film that protects the surface from contamination for a long time.

In addition, if there is no special product at home, you can use dishwashing gels, as well as washing powder, previously dissolved in water.

Can Domestos be used?

Many housewives are interested in the question of the possibility of cleaning a plastic bath with Domestos. This tool is not allowed to be used. Although it will contain hydrochloric acid, it does not damage the acrylic surface. Perfectly removes plaque and rust.

But before proceeding with the treatment of the bath with this remedy, you need to know how this is done:

• First, moisten a soft sponge with the composition and wipe the bath.
• Wait about 1 minute and wash off the composition with plenty of water.
• Wipe the surface dry.

In addition to cleaning the surface, Domestos reliably disinfects it and creates a protective layer.

Homemade Acrylic Bathtub Cleaners

They do not cause allergies and do not require separate material costs:

• Lemon acid. For cleaning, the bath is filled with warm water, to which 10 g of acid is added. Water is not drained for about 2-12 hours. After the time has elapsed, the water is drained, and the surface is rinsed with running water. Residual moisture is removed with a soft cloth.
• Toothpaste. In the event of various kinds of stains, use toothpaste. It is applied to a sponge and the stain is rubbed, slightly pressing on it.
• Baking soda. If it is necessary to remove rust or limescale, use a slurry of baking soda. The surface is treated with it and after a while it is washed off with warm water.

Ways to remove yellowness from an acrylic bath

Yellowness from the surface of an acrylic bath can be removed in the following ways:

• For gentle bleaching of acrylic baths, it is recommended to mix in equal proportions ammonia and hydrogen peroxide. With this composition, it is necessary to wipe the baths using a delicate cloth.
• Use in equal amounts lemon juice and vinegar. They are mixed and applied to the surface with a sponge.
• Apply laundry bleach. To do this, the powder is diluted with water to make a slurry, and applied to the spots. Leave until the slurry dries, then rinse with clean water and wipe with a rag.
• Finish the surface of the bath apple cider vinegar then rinse with water.

Removing limescale from an acrylic bath

The bath has constant contact with tap water. Over time, salts can settle on its surface, forming a gray coating. In the same form, fat particles are deposited, which we wash off during bathing from the skin, if after bathing the bath was poorly washed off. Due to such a coating, the bath loses its luster and whiteness, and the surface becomes rough.

It is necessary to choose products that will effectively remove plaque without damaging its surface. These liquids and creams include: Sanfor, Gel WC 5+, RAVAK Turbocleaner. They gently affect the surface without damaging it.

So that the plaque does not have time to stagnate, it is necessary to clean the bath with these products at least 2 times a month. If measures are not taken in time, then over time a thin hard film will thicken. Each time it will be more and more difficult to remove it from the surface of the acrylic bath.

The advantage of these products is that there is no need to rub the surface, but only need to process it, wait a few minutes and rinse with running water.

We remove strong plaque and "water stone"

If the bathroom has not been looked after for a long time, plaque may form, which will be difficult to remove. However, there is a tool that can cope with such a raid:

• Take cleaning powder for dishes or laundry, dilute with water and mix until a slurry.
• Add 2 tbsp. l. whiteness and 1 tbsp. l. vinegar.

This mixture must be applied to the surface with a plastic or rubber spatula and left for 20 minutes. Then take a soft sponge, lightly pressing, wipe the problem areas. Rinse the mixture with running water and dry the bath.

Video: How to wash an acrylic bath?

The following video offers tips on how to properly wash an acrylic bathtub, and also tests how to clean it with toothpaste and a special solution:

So, caring for an acrylic bathtub is not such a difficult task, if you do not bring the condition to a critical one, allowing the formation of thick limescale and rust. As soon as the smallest stains or dirt are noticed, they must be removed immediately using special formulations. Then an acrylic bathtub will delight you with shine and cleanliness for a long time.