How to restore the shine of the glossy surface of the kitchen. How to wash a glossy kitchen quickly and efficiently

Extraordinary, bright and stylish - glossy kitchens firmly "stand" on the pedestal of the most popular kitchen sets. What is the secret of this furniture? It's simple - a brilliant gloss with its very presence transforms the room and becomes the main focus.

Even the classic white gloss will not look standard, and the dark shades of the facades are also chosen for small rooms, because the mirror effect visually “pulls apart” the walls and raises the ceilings. Truth, glossy furniture has its own requirements - it “loves” delicate care.
What owners of such beautiful facades need to know to keep their shine kitchen furniture?


Let's say right away that it will be necessary to take care of glossy facades daily.
Ideally, the surface should be cleaned after each cooking. Why? Because glossy headsets leave all traces of splashes, grease, fingers and steam on themselves. If you do not remove dirt from the furniture, it will quickly become unusable and, of course, will lose its brilliant beauty. But, knowing all the enemies “by sight”, you can extend the life of the headset and easily clean the facades even from difficult stains.

The first enemy is moisture. Wet cleaning a glossy kitchen will not work. Especially if your headset is made using PVC film. Unfortunately, regular ingress of water, fat can cause the film to peel off. What to do? First, do not wash the surface with large amounts of water and keep the facades dry at all times. If the kitchen is small, there is a more radical way - to choose glossy facades only for the upper wall cabinets, and pick up the most vulnerable lower drawers from a practical and unpretentious material.
Enemy number 2 - direct sunlight. Bright light over time will "steal" the brilliance of a rich and colorful facade. There is only one way out - to experiment with the arrangement of glossy furniture. If your kitchen "lives" on sunny side, in the hot season, you can hang thick curtains that will protect the facade.
Another enemy of a glossy kitchen is hard brushes. What do you most often do to get rid of fat stains? Rub with brushes, thick rags, especially when you need to wash old grease stains. So the glossy surface should not be rubbed with metal scrapers and brushes. You risk seeing scratches. How then to clean the facade?
Your best friend- it soft fabric and microfiber. And of course, regularity. To prevent grease, stains and water marks from drying out.
And the most dangerous enemy is abrasive cleaners. We are accustomed to taking care of facades as simply as possible - to select effective powders and very active cleaners.
Glossy surfaces are not suitable. Do not wash the doors with powders, which include acids, alkalis and chemical solvents. Furniture must be handled carefully and delicately.
Exit - use liquid products. It is best to select those on the packaging of which it says "for glossy surfaces."


There is another way that will extend the life of the furniture: get a more powerful hood.
Even if you have a small kitchen, look at the hood, which is 20 percent more powerful than the current one. With good technique, drops of fat and steam will settle on the surface less and you will need to wash the facades less often.
So, in fact, we have come to the question of how to wash shiny surfaces if you cannot use powders, aggressive agents and metal scrapers?
Let's see what you need to have in your kitchen to quickly and effectively remove stains, fingerprints and grease stains.
Use a kitchen front cleaner
Use glass cleaner. Such a liquid will help remove difficult stains of fat.
Cleaning sprays that say “for glossy surfaces” on the packaging are also suitable for kitchen facades. They will help wash stains from steam and fingerprints.
Use dishwashing detergent, whatever you have. It will effectively eliminate both splash marks and greasy traces after cooking
Wet wipes come in handy when you don’t want to wash all the facades, but you just need to remove a few steam stains or stains. Wipes should not contain alcohol. A microfiber cloth will help wipe the facade dry and quickly remove moisture from the surface.


Microfiber can safely wash greasy stains and use it as a substitute for hard brushes. Wax polish will be able to increase the shine of the furniture and will act as an antistatic agent.
After you have wiped the facades with a dry cloth, use a polish to remove static electricity and prevent dust from settling on the facades.
Shiny surfaces can be washed with gentle shower cleaners or regular liquid soap. The main thing is that the composition does not contain nitroglycerin, acetone and synthetic resins.
In order for the facades to always shine and literally dazzle with their beauty, they must first be cleaned with a detergent or spray.
Then wipe dry with microfiber and apply polish with wax.
Such careful maintenance and service life of furniture will extend and save you from more serious cleaning when you need to clean out old grease stains and steam stains.
After each cooking, it is best to wipe the facades with a dry cloth or wet wipes.

How to wash and how to clean kitchen facades MDF set

Often the choice of materials for kitchen facades, as well as the type of finish, depends on one question, quite simple at first glance: how to clean kitchen set and how hard is it to do? That is why buyers are confused by white sets that look luxurious in the photo. And even more so, many doubt whether they will be the same in reality after several cleanings, will the gloss applied to them be scratched?

No matter how strong they are modern solutions, care for them requires attention and accuracy, because most products designed to remove fat contain either abrasive substances or aggressive solvents. Both of them can lead to damage to the finishing layer of facades. Almost all materials can be scratched, even if the damage is not visible to the naked eye.

Aggressive components corrode film, paint on MDF plastic coating and varnish on gloss, there are quite a few photo examples of such an effect on the Internet. To extend the life of kitchen furniture, namely its facades, you should carefully study the composition of the purchased detergents. But you can prefer simple ways headset care.

It is worth paying attention to gentle products especially if you have shiny white facades, on which any stains and scratches are visible better than on any other color surface.

The best remedy for dirt and grease on the facades of the kitchen ─ regular maintenance

Regardless of the characteristics of the finishing of MDF facades, any of them cannot withstand frequent washing with aggressive preparations: the appearance deteriorates; moisture and even more grease get into scratches and damage. As a result, the facades of the headset lose their gloss, gradually collapsing and subsequently requiring repair or replacement.

Experienced housewives have long concluded that there is no better remedy than ordinary dishwashing detergent.

To wash the facades of kitchen furniture with dish detergent, it should be diluted a little in water, getting enough foam for a gentle surface treatment. This method is applicable to any coating, since it does not destroy the material and does not scratch it.

You can use the usual detergent for any kitchen quite often, so it is better to wash contaminated surfaces immediately after cooking.

In order to clean the furniture from frozen drops of fat, you first need to apply foam to the contaminated areas of the facades for a while, and then wash the kitchen with the hard side, preferably of a new sponge. If the headset doors are covered with gloss, then you should not make much effort to press the surface with a sponge ─ even barely noticeable scratches can remain from it. But matte furniture should be washed just as carefully.

If the headset is not washed at all for a long time, then the layer of dirt and grease will be difficult to remove with a simple remedy. To care for kitchen furniture in this case, you will have to purchase special household chemicals, but you need to choose pastes or gels, the composition of which is applicable to each specific type of facade.

Most often, the complexity is the content of the modular kitchen, since the gap between separate elements gets dirty quickly. But the way out will be special pads on the joints, which will prevent the ingress of fat and moisture between two adjacent parts of the modular headset.

Universal gentle care products for kitchen furniture

Of course, you have to wash the kitchen regularly, so at all times the housewives chose the most gentle means so that the furniture served long time. During the existence of wooden modular and modern headsets many methods have been tried.

Previously common white kits tried to wash with soda and mustard. Today, soda is not applicable for MDF cabinets, as it is a rather harsh abrasive. And mustard can be used to make a fat-removing paste. To do this, mix mustard with water to get a mushy mass. Apply the mixture to the stains and wash off after a while. warm water without making any effort to avoid scratching the facades.

Among folk remedies, there are other ways to care for a modular kitchen and conventional headsets:

  • you can wash glossy white and any other facades with vodka or alcohol, diluting it 1: 1 with water;
  • 1 st. l. dilute ammonia in a liter of water and spray the contaminated surfaces, leave for a few minutes, and then wipe. But this tool should be used with caution on glossy surfaces, because stains may remain;
  • If you mix lemon zest (or lemon juice) with vinegar and a little alcohol, you get an effective grease remover that will not harm even an inexpensive modular glossy kitchen. White coatings can also be washed with this composition.
As you can see in the photo, there are a lot of funds, but many are very similar in composition.

Although any modular kitchen, not just white glossy, is somewhat difficult to maintain, facades can be kept clean with a regular or apple cider vinegar mixed with vodka. With this solution, you can regularly wipe the surfaces, and the dirt will not have time to accumulate on them. And the kitchen will shine like new.

For general cleaning, you can use the most effective means ─ hot steam blow. To do this, use both special steam cleaners, and regular irons with vertical steam function.

We hope that our advice will be useful to you, and your kitchen will be indistinguishable from the new models from the photo catalogs of manufacturers!

http://idealkuhnya.ru

Not knowing how to wash the whole kitchen off chronic fat, you may damage the finish of the headset. To quickly and easily deal with persistent pollution, use laundry soap, vegetable oil, soda, mustard, ammonia and hydrogen peroxide. With these improvised ingredients, you can get rid of pollution of any age. Combine the products and prepare a solution, apply it on the surface to be treated, let it soak in and wash off after 15–30 minutes with a soapy sponge.

The kitchen is the most polluted part of the house, because during cooking, grease splashes and settles on the surface of walls, furniture, stoves, becomes covered with a layer of dust and dries. No housewife will thoroughly wash the kitchen after each cooking due to lack of free time, but when doing a general cleaning, it is important to know how to clean the kitchen from grease with household and folk remedies quickly without damaging the integrity of the kitchen set.

Cleaning with detergents

The most popular is cleaning with household chemicals. Specifically designed to dissolve grease, the cleaners safely remove stubborn dirt from surfaces with a minimum of effort.

The only drawback of these products is their high cost, since several different cleaners are needed to clean the entire kitchen and are designed to clean furniture and kitchen utensils.

popular and highly effective household products, are:

  • "Amway";
  • "Shumanit";
  • "Silit Beng";
  • "Mister Muscle".

Note ! Products containing abrasives and chlorine are strictly contraindicated for use on plastic or MDF surfaces, because they can scratch or discolor the coating.

Having picked up a cleaner, starting from the type of pollution and the type of surface, start cleaning, adhering to the following recommendations:

  • study the instructions for use;
  • observe the dosage so as not to damage the color and coating of the headset;
  • wear protective gloves when cleaning to avoid burns and an allergic reaction;
  • ensure an optimal supply of fresh air, as some products can be toxic and cause dizziness.

In the process of treating cabinets from grease, use special kitchen napkins that have a soft structure and absorb a minimum amount of product. Simply apply the cleaner to a cloth and wipe the door or wood countertop. For removing heavy pollution leave the surface treated for 20 minutes, and then carefully rub and polish.

Types of MDF facades and cleaning methods

Before washing the kitchen from accumulated grease and dirt, it is important to understand what material it is made of. This will allow you to choose the right cleaner.

The most popular cuisines are from:

Each material has its own cleaning methods. It is convenient to wash plastic and glass facades, oil and soda, ammonia and hydrogen peroxide - wooden, MDF, chipboard and chipboard.

Cleaning folk ways

With the advent household chemicals faith in folk remedies began to disappear, but, in spite of everything, they are a worthy and economical substitute for expensive remedies.

They can clean almost all surfaces, the main thing is to correctly combine the components and assess the degree of contamination.

mustard powder

Our grandmothers cleaned grease from kitchen furniture with ordinary mustard powder. The principle of processing this ingredient is simple:

  • Moisten the contaminated area with water.
  • Sprinkle mustard powder on a damp surface of furniture, stove or household appliances.
  • Rub with a dry kitchen towel.
  • Wash the cloth with water, lather with laundry soap and remove the mustard residue from the treated panel.

V this case mustard is a mild abrasive fat dissolver. It delicately scrapes off fatty accumulations from the surface without damaging the coating of the headset. However, this method is only suitable for cleaning fresh stains or minor old ones.

We wash the greasy ceiling in the kitchen with soap and soda

Soda-soap solution works on the principle of mustard, but is more effective. Easily cleans home cutlery and kitchen appliances, ceiling and.

To clean the kitchen in this way, follow the sequence:

  1. Grind laundry soap (1/2 bar) using a food coarse grater.
  2. Fill with water until a cloudy, slightly viscous homogeneous solution is obtained.
  3. Treat the contaminated panel with soapy liquid.
  4. Sprinkle some baking soda on the sponge immediately.
  5. Rub the soapy area.
  6. Let the stain sit for about 20 minutes.
  7. Wet a clean rag and wash off the baking soda with soapy water.

Note ! If processing has been wooden surfaces, laminate, don't forget to reduce panel contamination and prolong headset life.

Soap and soda can clean and disinfect almost the entire kitchen, including. But if the furniture is glossy or lacquered, choose a different cleaning method. Such surfaces should not be contacted even with soft abrasives to avoid scratches.

We clean natural wood furniture with oil and soda

combination of soda and vegetable oil cleans fat well in the kitchen, as it refers to folk remedies that allow not only to remove dirt, but also to take care of wood.

  1. Prepare a creamy mixture of baking soda and sunflower oil by mixing the ingredients 1:2.
  2. Process congealed fat on the wooden chest of drawers.
  3. Gently clean the fat accumulations with a soft brush.

If stains from furniture accessories are difficult to wipe off, let the mixture penetrate into the soil structure for about 15 minutes, rub again and wash off the residue with a damp sponge and detergent.

Watch the video to see how effective it is. this recipe:

We clean glass, plastic, furniture with vinegar

With the help of vinegar, various surfaces and other types of dirt are cleaned. The ingredient has such an effect due to the acid, which effectively dissolves splashes of fat. Applying the product is simple: pour a little table vinegar on the dirt, let the stain limp for 15-20 minutes and rinse with a sponge treated with detergent.

It is impossible to pour the product on vertical cabinets, doors, so apply vinegar on a sponge (copiously), wipe the surface and leave for 15 minutes, then rinse. In this way, you can also.

Note ! To enhance the effect, you can combine detergent with vinegar, pouring acid onto a sponge, along with a drop of dishwashing detergent.

Cleaning the kitchen hood

Ventilation system prevents the spread of odors around the house and absorbs most of the grease splashes, accumulating them on the grate.

We wash the most difficult thing - handles and other fittings with steam cleaners

Hardworking housewives acquire special ones. This technique removes all kinds of contaminants from various surfaces and disinfects them. The device is suitable for processing any kind of wood, plastic, small accessories, cutlery, etc.

The device acts on steam pollution, which affects the structure of fat deposits, making it soft and liquid. As a result of operation, you will be able to clean:

  1. kitchen facade, electrical appliances, tables and walls from grease splashes;
  2. restore the shine of glass or stainless utensils;
  3. remove scale, ;
  4. , bacteria and fungi.

The device does not require the use of oilcloth, but allows you to wipe stains of varying complexity and age from the table, walls, cabinet handles, gas boiler, chipboard, MDF and chipboard.

You can clean the kitchen from greasy stains with household and folk ways. On the eve of processing, be sure to determine what material it is made of. If the furniture has lacquered finish, avoid using abrasives such as baking soda and mustard. For other kitchens, as well as walls, tiles, ceilings, any cleaning method will do.

Larisa, June 10, 2018.

The beauty of a glossy headset is quite difficult to maintain. All defects are visible on a smooth surface. It is necessary to choose means for washing such a kitchen especially carefully.

The facade cleaning algorithm depends on the chosen means:

  • Sprays, liquids. A detergent composition is applied to the surface using a sprayer or foam rubber sponge (soft side). Then the headset is wiped with a dry cloth.
  • Wet wipes. Use independently, do not require additional materials.
  • bar soap. Grate into warm water to a paste. With the help of a sponge or cloth pass over the surfaces. Then the paste is removed with a damp sponge, wiped dry with a clean cloth (several times if necessary). Regular washing can be carried out with a soapy solution, while the sponge is well wrung out.
  • Mustard. Natural mustard paste is applied to facades. After 3-5 minutes, wash off with a slightly damp sponge in several passes. You can make your own pasta. In this case, the mustard powder must be thoroughly mixed with water until completely dissolved.
  • Dishwashing gels, liquid soap. A small amount is shaken with water until foam appears. Foam covers dirty areas. After 10 minutes, remove the product with the same sponge, wipe with a clean, damp cloth, then dry.
  • Steam. Heat up the iron or steamer. Pass over the stains without touching the coating of the headset. Processing is completed when the dirt becomes soft. Then they are cleaned with a rag, wipe the facade dry.

The polish completes the main cleaning. It is applied with a piece of cloth, rubbed until shine appears and stains disappear.

Glossy Headset Cleaners

Aggressive detergents leave scratches, streaks, and kill the shine of glossy coatings. The composition should be soft, but effective.

Professional

From specialized products, a glossy kitchen set will calmly transfer:

  • Washer for glasses (windows, mirrors). Suitable for car and home use. Such compositions cope well with stains, handprints, steam, light grease.
  • Cif for glass and shiny surfaces. Available as a spray, it gently removes dirt and grease from smooth countertops and side panels.
  • Interior Cleaner HG. Designed to remove grease, fingerprints, dust, stains from MDF, PVC, paint, plastic.
  • EcoWoo kitchen cleaner. It has a mild composition, but it is great to clean the gloss without streaks and unpleasant odors.
  • Universal liquid for glossy coatings. Available in bottles and sprays. It can be used on any furniture, including the facades of the culinary space. Removes dirt, ingrained grease, refreshes color, protects against scratches.
  • Dishwashing gel. Any without abrasive particles in the composition. Perfectly copes with pieces of stuck food, stains from spilled liquids. Liquid soap works the same way.
  • Wet wipes. Universal, for hands, intimate hygiene, cleaning cars and furniture. All of them have a delicate impregnation and suitable softness of the fabric itself. Convenient to hold quick cleaning, washing individual areas.
  • Household microfibre cloths. Well remove dust, spilled liquids. Reusable, inexpensive.
  • Polish (solution, paste, gel). Brings the finishing touches to cleaning. Restores shine, creates protective film(from scratches, dirt, prints), works as an antistatic agent.

Any item must be free of chlorine, alcohol, powders and solids, nitroglycerin, synthetic resins and acetone. Of the polishes, varieties without wax or with a minimum amount of wax are preferred. When heated, this component becomes sticky, the opposite effect is obtained.

Folk

Washing a kitchen set made of glossy material is real and without a visit to a hardware store. Every home has:

  • bar soap. Household and tar varieties do best, but you can take baby toiletry. The main guideline in the choice is the absence of scrubbing, coloring and aromatic additives. Soap can remove even stubborn stains.
  • Mustard. Perfectly removes fat, eliminates dried-on pieces of food, adds shine. Suitable mustard without extraneous flavorings.
  • Steam iron (clothes steamer). It is undesirable to use constantly, so as not to load the gloss with excess moisture. But it works well when other products have failed to soften old, stuck-on food and accumulated fat. The last resort method.

Such options are especially useful for people who are allergic to household cleaners.

Caring for a glossy headset

Glossy kitchens are often made from MDF-type fibreboard. The body is finished with plastic, film, acrylic or paint. Due to this, beauty with brilliance and gloss is created. The method of care is selected depending on the type of external coating.

Material Peculiarities How to clean
1. Plastic (plastic sheets)
  • cheapness;
  • waterproof,
  • resistance to soaking;
  • strength, resistance to fracture;
  • fades quickly;
  • scratches easily.
  • soap solution;
  • gel products;
  • wet wipes;
  • mustard paste;
  • steam (moderately so as not to melt).
2. Paint and varnish compositions
  • shine better than others;
  • easy to change color;
  • stains are easily cleaned;
  • paint chips may appear over time;
  • medium scratch resistance.
  • liquid means;
  • glass cleaning sprays;
  • soap solution;
  • mustard paste;
  • wet wipes.
3. PVC film
  • economical in price;
  • retain brightness for a long time;
  • easy to update;
  • not waterproof, quickly swell from moisture and steam.
  • gel products;
  • dry and wet wipes;
  • soap solution and liquid products ONLY with a well-wrung sponge.
4. acrylic sheets
  • the most unpretentious in care;
  • easily scratched;
  • moderately water resistant.
  • all kinds of funds. Steam with care.

Taking into account the features of your kitchen will extend the life of the headset.

Caring for a glossy kitchen facade begins from the moment it is installed in its rightful place.

  • The location of the headset should be foreseen in advance so that direct sunlight does not fall on the surface. This trick will prolong the brightness of the color.
  • If the apartment is humid, then it is better to buy painted and acrylic options. PVC quickly swells, and plastic absorbs mold spores for a long time, and is more susceptible to fungal growth.
  • In inappropriate conditions, when you still want gloss, you can arrange a mixed version. In shiny materials "dress" only upper cabinets. Parts that are actively in contact with moisture (table top / walls / lower drawers) should be selected from a more unpretentious material.

In regular cleaning, it is enough to observe a few nuances:

  • Maintain dryness. Wipe surfaces thoroughly after washing. Make sure no liquids get into the in large numbers and didn't stay long. Wring sponges and rags well.
  • Use products with a low content of active substances. Make weak or medium solutions, dilute concentrates with water.
  • Choose gentle sponges and rags. Suitable microfiber, soft foam rubber, flannel. Metal, abrasive hard foam rubber, coarse fibers, brushes, scrapers are excluded.
  • Clean regularly. Wipe surfaces after each cooking so that traces, stains, dirt do not have time to harden.
  • Forget about powder cleaners.
  • Ventilate the kitchen. Free air circulation will remove excess vapor and moisture.

The main secret of a beautiful gloss in the kitchen is proper care. With careful attitude, the headset will retain its shine for a long time, it will please the appearance. The more often the necessary cleaning is carried out, the less work is required from the owner.

The great advantage of glossy facades in the kitchen is their appearance. However, on such facades, various contaminants very quickly appear: from grease stains to fingerprints. In addition, if the coating is not washed properly, noticeable stains will remain on it. Therefore, when purchasing glossy facades for the kitchen, you should know how to properly care for them.

  • Tamara GLOBATo escape from lack of money once and for all, in 2018 make it a rule to carry with you ...

1 Types of coatings

Glossy facades that are used to finish the kitchen can be covered different materials: plastic, paint, PVC film, acrylic.

To wash the facades without harming the surface, you need to select cleaning products depending on the material.

Furniture cleaning at home: effective means and helpful tips

2 Plastic

Cheap kitchens are made from plastic by gluing a plastic sheet onto front side facade. The advantages of plastic coating include water resistance. It won't fade and stay strong for a long time. However, this material also has disadvantages. Glossy plastic will fade over time. Therefore, you need to choose the right detergents. To begin with, the action of the composition is checked on an inconspicuous area of ​​\u200b\u200bthe facade.

Do not use hard cloths or brushes. Abrasive products can damage the material. It will be impossible to repair such damage.

Soap solution is perfect for cleaning glossy plastic facades.

The cloth used for cleaning should be soft and lint-free.

Quick carpet cleaning in the car and at home

3 Paint

Often, MDF boards are used for the manufacture of facades. These are medium-density fibreboards, for the creation of which the method of dry pressing of small wood chips at high pressure and temperature.

Often such plates are painted in a certain color, and then covered with several layers of varnish. As a result, the same glossy effect is achieved. When cleaning painted surfaces, it is important to use products that do not have abrasive properties. You also need to use only soft microfiber cloths.

You can clean the painted glossy facade, like the plastic one, with a soapy solution. You can also use glass cleaner. It will help to cope with various stains on the gloss. After cleaning, wipe the facade with a dry soft cloth to get rid of streaks.

Methods for cleaning feather and down pillows

4 PVC film

Another way to cover kitchen facades is to stick a PVC film with vacuum press. Such kitchens, like plastic ones, are considered an economical option.

The film is sufficiently resistant to mechanical stress and is able to maintain color brightness for a long time.

However, such a coating may peel off due to an excess of moisture. Therefore, when cleaning the facades covered with a film, you need to carefully wring out the rag.

Both soap and glass cleaner can be used for cleaning.

5 Acrylic

Acrylic sheets are sometimes glued to MDF boards. Caring for such a coating is quite easy. However, for cleaning, do not use aggressive products that can deprive the facades of a glossy sheen.

You can wash acrylic with soapy water, glass cleaner and other non-abrasive detergents.

6 Rules of care

  1. 1. After cleaning, wipe the surface dry. Otherwise, the facade may swell and become moldy. PVC film from an excess of moisture can peel off.
  2. 2. It is advisable to install the kitchen set so that it is not exposed to direct sun rays. Exposure to ultraviolet radiation leads to a dulling of the color of glossy facades.
  3. 3. Concentrated detergent formulations must be diluted with water. It is recommended to purchase special products for the care of glossy kitchen facades.
  4. 4. When cleaning, use only non-abrasive products and soft cloths. Do not use powdered formulations that can scratch the surface.
  5. 5. Aggressive substances can corrode the coating and leave cloudy streaks on the surface. white color which would be almost impossible to get rid of.

7 How to wash kitchen facades?

As already mentioned, the glossy surface can be cleaned with non-abrasive detergents.

There are several ways to remove stains from gloss.

8 Soap solution

Ordinary laundry soap is able to cope with many types of dirt on kitchen furniture.

Procedure:

  • dissolve shavings of laundry soap in warm water;
  • moisten a soft cloth with the resulting solution;
  • wipe the surface to be cleaned;
  • Wipe the coating dry and polish it to a shine with a flannel.

Grease stains from the gloss are well removed with dishwashing detergent. Would need:

  • mix water with a small amount of dishwashing liquid;
  • beat the mixture until foam appears;
  • treat the most contaminated areas with foam;
  • wait 10 minutes;
  • wipe the stains with a sponge;
  • wipe the surface with a clean damp cloth;
  • wipe with a dry cloth.

You can wash the glossy facades of the kitchen with soap and dish gel quite often without harm to the material. Therefore, cleaning with these products is recommended to be carried out regularly.

9 Mustard

Also, grease stains can be removed with mustard. For this you need:

  • mix mustard with water until gruel;
  • apply the resulting mixture to pollution;
  • leave for a few minutes;
  • wash off the composition with a sponge moistened with warm water.

Do not apply too much pressure on the sponge, as the gloss is prone to scratches.

10 Steaming

If old dirt has formed on the glossy surface, you can remove them with steam. You will need to use a special steam cleaner or an iron with a steam function.

Stains should be treated with steam. When the dirt softens, you need to gently wipe them with a sponge or soft cloth. Then it is necessary to dry the facades and polish them with flannel or suede.

11 Special tools

In the household chemical store you can buy special products for cleaning glossy facades. They are able to create a protective film on the surface that repels dust and other contaminants. These formulations are available in different forms: gel, liquid, paste. You should not take a powdered product, as the granules can scratch the coating.

Not all ready-made detergents can be used to clean the gloss. In no case should they be abrasive, contain chlorine, alcohol or wax. Products containing chlorine and alcohol may discolour the glossy finish. And wax can make facades sticky. As a result, dust and other contaminants will stick to the surface.

Therefore, the choice of a cleaning agent for glossy facades must be approached seriously. Do not use products for cleaning microwaves, stoves, bathtubs, sinks, etc.

You can keep the glossy shine of kitchen facades if you follow the rules for caring for them. Incorrectly chosen means can lead to tarnishing of the material and leave untidy streaks on it. Gloss requires regular cleaning. It is necessary to wash off dirt and greasy stains in time, which very often appear in the kitchen during the cooking process.

The owners of glossy kitchens often have a question: how to wash a glossy kitchen set?

Today, the most popular are kitchen sets made of bright and stylish glossy materials. Such a kitchen looks aesthetically pleasing and completely changes the room. Thanks to the diverse color scheme, even the most capricious person will find a suitable one for himself. Many people like standard white kitchens, others prefer darker tones, but the reflective abilities of glossy surfaces of any color transform the room, increase the visual volume.

But the owner of such a kitchen should not forget that proper care for it will help to preserve such beauty. The owner of a glossy kitchen must have certain knowledge and follow the conditions for proper care of it. What needs to be done to keep the bright and shiny surfaces of such a kitchen?

A glossy kitchen has a number of advantages.

Advantages of a glossy kitchen set

Gloss, reflecting light, visually enlarges the space of the kitchen. This coating is resistant to fading, so the beautiful appearance remains for a long time. The gloss is resistant to minor damage. Cleaning the headset does not require any particular effort. A glossy surface, regardless of color, can bring something new to your interior.

Glossy Kitchen Care Methods

Users of glossy kitchens recommend purchasing only wall cabinets with a glossy finish. An important role is played by the color of kitchen furniture. On a surface that is black, spots and marks are most visible. Therefore, many are confused by this kitchen set. White color hides all these defects.

It is important to remember that it is necessary to clean glossy facades daily, because the gloss perfectly collects all drops of grease, fingerprints, liquid stains and more. By fighting them, you prolong the time during which you will enjoy the beauty of your kitchen.

So, what are the "enemies" and how to deal with them in order to emerge victorious:

Abundance of moisture. Glossy facades are prohibited from cleaning with a large amount of liquid, since the film that covers the furniture will suffer from moisture penetration. What should be done? Always keep the kitchen dry, clean with a little water. At the stage of ordering a kitchen, you need to consider which places will be most susceptible to excessive moisture and order their production from another material that is not so capricious. For example, the upper facades are made of glossy material, and the lower ones are made of MDF.

  1. Exposure to direct sunlight. With constant light rays hitting glossy facades, they will lose their luster over time, this applies both to white surfaces and other colors. What to do in this case? The best solution it will be at the planning stage of the kitchen to try to install it in such a way as to avoid direct sunlight on the glossy facades. You can also consider protecting the kitchen with thick curtains or blinds that can save the gloss of surfaces in bright sunny weather.
  2. Metal brushes and thick rags. The use of hard brushes and rags made of dense material for cleaning glossy surfaces threatens with the appearance of various scratches and roughness. When housewives see a greasy stain on the surface of the kitchen, their first desire is to get rid of it as soon as possible. In this situation, you need to be reasonable, use a rag made of soft, delicate fabric or microfiber. Experienced owners of glossy kitchens are advised to clean regularly to prevent stains of grease or other solutions from drying out.
  3. Detergents on an abrasive basis. Of course, the most effective for cleaning are compounds containing these active substances. But it is strictly forbidden to use powders containing a high percentage of acids, alkalis and other powerful solvents to care for glossy facades.

Several applications of these compounds will cause irreparable damage to your kitchen. Therefore, it is better to use products specially designed for delicate cleaning of glossy surfaces. They have a liquid base, do not contain a large amount of abrasive agents in their composition.

Important: the main rule is that the surface of kitchen furniture should always be kept dry, otherwise moisture will penetrate into hard-to-reach places, as a result of which the film will peel off a little.

Detergents

This is the most important question: how to wash a glossy kitchen set, if powders, aggressive substances cannot be used for cleaning?

There are tools and methods that will help you get rid of various stains, stains or traces of something:

  1. A window cleaner is suitable. This substance will help you remove stubborn grease stains.
  2. The spray, where it is indicated on the package - "for glossy coatings", is well suited for washing the kitchen set. This cleanser will help you get rid of any streaks and marks.
  3. As a cleaner, any product that is intended for washing dishes is suitable, because this substance is effective. It eliminates traces of food and fat.
  4. If you need to wash only some parts of the kitchen facade, then ordinary wet wipes will do the job perfectly.
  5. Use a microfiber cloth to wipe the glossy headset dry from moisture. This material excellent, because, thanks to its structure, it does not damage the surface of the facade, penetrates into hard-to-reach places, and is also used for multiple applications.
  6. If you're looking to update the look of your kitchen furniture, a waxed polish will do the job. The material will enhance the gloss, protect the surface from dust adhesion.
  7. To wash the facade, you can even use liquid soap. The main thing is that it does not contain aggressive substances.

In order for a glossy headset to please your eye, you need to follow a certain algorithm of actions:

First, the headset must be cleaned - the spray will handle this.

  1. Then dry the surface with a microfiber cloth.
  2. To enhance the shine, apply polish with wax.

If you carry out these actions regularly, you will be able to extend the life of your kitchen furniture, and you will not have to do a general cleaning afterwards, getting rid of old stains formed from grease. Just do not forget to wipe the headset with a soft cloth or wet wipes after each cooking. After rubbing, the facade will acquire the desired gloss. To maintain it, you just need to wash small grease stains daily.

Important: before using any detergent, it should be tested on an area of ​​kitchen furniture that is almost invisible.

There is no one specific option for caring for a glossy kitchen set. This decision is individual, the owner or hostess decides which detergents to use and how often to wash the furniture.
You can make a mixture consisting of apple cider vinegar and vodka. With this mixture, you can wipe the surface of kitchen furniture constantly, the dirt simply will not have time to accumulate.

Outcome

The main thing in caring for a glossy kitchen set is the daily elimination of grease stains and marks. We think the tips in this article will help you keep your kitchen in the best possible condition.

Types of glossy surfaces

For production furniture facades with a glossy surface, four main methods are often used. It can be plastic, paint, PVC film or acrylic coating.

In the manufacture of glossy surfaces for furniture facades, 4 main methods are used

Plastic application

Kitchens with plastic application refer to economical options. Chipboard or MDF boards are usually not used for this type of coating. A plastic sheet is applied to the front side of an inexpensive facade. It is usually glued by postforming, under pressure and under the influence of high temperature.

Such a coating must be washed with non-aggressive detergents. Unfortunately, if any damage is caused to it during operation, it is almost impossible to fix it. The only option left is to completely re-glue it.

Such an economical option as a kitchen with a plastic coating must be washed with gentle detergents

When washing the plastic coating, you can not be afraid that it may get wet. This material is completely waterproof. It has a fairly high strength, so this kitchen can serve you for a very long time.

However, glossy plastic tends to lose color brightness, so be careful when choosing detergents. It is very important to first try a new product on the least visible area. If everything is in order with the color, then feel free to remove the entire kitchen set with them.

The most versatile tool that can be used for cleaning is ordinary laundry soap rubbed on a grater into water. Such a solution is able to remove most contaminants and does not damage the surface at all. After the cleaning is completed, it is necessary to wipe the coatings dry to a shine. You can use special cloths for glass surfaces which are sold in most hardware stores. They easily remove stains on a glossy surface.

Laundry soap diluted in water will help to wash the plastic surface, without unnecessary damage.

Facade painting

Most often it is MDF boards that are subject to coloring. First applied to them desired color and then several coats of varnish on top to achieve a glossy effect. The application technology is rather complicated. Each layer must be carefully sanded, primed, sanded and dried. But in the end you get an absolutely flat, perfect surface.

Small defects during operation on a painted surface can be corrected, unlike plastic. But still, you need to try to avoid scratches to the maximum. To wash such facades, non-abrasive detergents can be used. At the end of cleaning, it is necessary to wipe them with a dry microfiber cloth in order to eliminate unnecessary stains.

For painted glossy facades, it is good to use a glass cleaner

For painted facades, a soapy solution can also be used. Also very a good remedy according to the reviews of the hostesses, it is a common remedy for glasses. It is especially indispensable for dark surfaces, on which stains are more visible. It is recommended to apply the product on the facades and wipe with a dry microfiber cloth.

PVC film

vacuum pressing on MDF facades a glossy PVC film is glued. Such kitchens, like plastic ones, are economical options. This surface can be washed with non-abrasive detergents. After all, such a film is quite resistant to damage and discoloration. The only thing is that such facades can fade under the influence of direct sunlight. pvc film in no case can not be washed with a very damp cloth. Otherwise, it may peel off the facade.

To prevent peeling of the film from the facade, try to wipe the surface with a not too damp cloth.

Since the film is loyal to most detergents, it can also be washed with soapy water and glass cleaner. Also very efficient and fast method stains on the facades are ordinary household wet wipes. They do not leave streaks on the surface and effectively cope with pollution.

Acrylic facades

For such facades, MDF boards are taken and acrylic plastic is glued to them. For this, a special polyurethane adhesive is used. Pollution from such a surface is removed quite simply. These facades, when defects appear on them, can be polished. But in no case should they be washed with aggressive detergents, as you can lose the shine of the glossy facade.

For cleaning surfaces with acrylic facade, use non-abrasive detergents

All previous stain control methods apply to acrylic surfaces. You can use soapy water, glass cleaner, cleaning wipes, and any other non-abrasive cleaner.

Pros and cons of gloss facades

The advantages of glossy facades are many. They look very impressive and beautiful, due to the reflection of light visually increase the space of the kitchen. However, such a kitchen, unfortunately, requires constant cleaning. After all, stains from finger touches, from water, from oil and other stains instantly appear on it. This is most likely the most basic disadvantage of glossy surfaces. In order for such spots to be less noticeable, it is better to purchase not a monochromatic gloss, but with some inclusions. It can be, for example, gold, silver chips or any other color.

Try to choose a kitchen set in such a way as to facilitate the cleaning process.

In order to minimize cleaning, you can purchase only glossy wall cabinets, and pick up the bottom of the kitchen with some other, for example, matte surface. It is also important to choose correct color. On a dark gloss, pollution will be more noticeable, and on light ones, respectively, less.

Maintenance of glossy facades

In order for the facades to always look attractive, they need proper care. It is very important that the kitchen is kept dry. Otherwise, shelves and facades can swell from excessive moisture and even become moldy. Then the PVC film or plastic coating may peel off. It is important to install the kitchen in such a way that sunlight did not fall directly on the glossy facade. This will help to preserve the brightness of the color of the kitchen for a long time.

If you have purchased a detergent concentrate, then you must definitely dilute it before using it to wash glossy facades. It is ideal to buy a special paste or wax to care for the kitchen. It is also possible to do without chemicals if your home has a steam cleaner.

On sale now you can find universal gels for degreasing surfaces. It can even be an ordinary dishwashing detergent, such as Fairy, Sorti, Persil and others. You will need a microfiber cloth for cleaning. Apply the composition to all facades, then simply wipe with a damp cloth with a little water. Next, wipe the facades dry. It is best to use disposable rags for this purpose, which are sold in large skeins. This will completely avoid divorce. With daily wiping of surfaces, your furniture will always look neat and beautiful.

What products are better not to use for glossy surfaces

When buying detergents, you need to pay attention to the composition. Use soft cloths and non-abrasive liquids without aggressive ingredients. Make sure that the products do not have a dissolving and corrosive effect. Otherwise, they may cause the facades to become cloudy or streaked. It will be impossible to get rid of it.

The range of detergents is now simply huge, so it is important to know how to wash a glossy kitchen set so as not to spoil it. As has been said many times, in no case do not buy abrasive products for washing facades. This refers to such as Comet, Pemo Lux and most other powdered products. From the first time they will not scratch the glossy surface, but over time it will become cloudy and stop reflecting light. Sponges should not be hard for the same reason. Use the softest rags designed for gloss or glass.

Do not use powdered cleaners and hard sponges, which can damage the glossy surface of the fronts.

You should not buy washing liquids with chlorine, such as Domestos, Cilit bang, Toilet duck and the like. Even if there is a need to get rid of grease stains. Such products discolor the facades and make them untidy.

Also, the composition should not contain wax. It is usually used to care for wooden furniture. If you apply a wax composition to the gloss, then it will become sticky and will attract pollution, and not repel them. Washing the facade in this case will be very difficult.

Please note that the detergent does not contain alcohol, as it will contribute to the fact that the facades will begin to fade.

Avoid using products containing chlorine, alcohol and wax

It is strictly forbidden to wash kitchen surfaces with products for microwaves, hobs, ovens and plumbing. Usually they contain very aggressive substances that will make the surface cloudy.

How to wash glossy kitchen facades

The basic rule for keeping glossy facades clean is regular cleaning. Cleaning old stains requires stronger products and hard sponges. This requires more time from the hostess, and at the same time can damage the surface of the gloss. Therefore, the most correct thing is to wipe the furniture daily, after each cooking.

If you do not have a specialized product for a glossy surface, then you can prepare it yourself. Dilute the warm soapy solution and take a soft cloth. So simple and available remedy absolutely will not damage the glossy surface. To do this, you can use ordinary soap or dishwashing gel. The latter is able to dissolve fats and even wash old stains of oils. Typically, these gels are non-abrasive and do not contain chlorine.

In the household department of the store you can now find special products that can reduce the number of stains on glossy surfaces. These are such as, for example, VuPlex, Ultra Gloss, Amway and many others. They have a special composition that creates a barrier film on the facade. Usually such a tool is able to protect furniture for a whole year. Next, you just need to repeat the procedure. Experts also advise applying antistatic agents to the facades, which will repel dust and microparticles. You can buy, for example, Barfin brands.

As already mentioned, the rag you use for cleaning is very important. Brand "White Cat" offers huge selection rags for glossy surfaces. Usually their price is several times higher than those sold in a regular hardware store. But when used, the difference is really obvious. If you are against chemical cleaning products, then you should definitely consider this option. If you apply all of the above recommendations, then the kitchen set will be able to please its owners for a long time.

The glossy surface gives chic to cabinet furniture and creates the illusion of space expansion. Glossy surfaces are especially popular with children, who cover them with prints of their hands and paint with markers.

A kitchen with a glossy facade looks very aesthetically pleasing and attractive.

The unsightly picture is complemented by cooking stains, defects and unpleasant odors that occur when improper care. All together it does not look aesthetically pleasing. Arm yourself with patience, our advice and glossy furniture will shine with its original brilliance.

Caring for such a headset requires a lot of time and effort.

Take care of the glossy facade from a young age

The surface of glossy facades is afraid of scratches and sudden changes in temperature. In order not to damage it, stick to simple rules care:

  • Use microfiber, flannel, or softcotton cloths;

    It is strongly not recommended to clean surfaces with hard sponges because of the risk of scratches on the gloss.

  • Do not use products with abrasive additives;

    In no case should you wash with aggressive detergents, as you can lose the gloss of the glossy facade.

  • Protect gloss from direct sunlight and ultraviolet radiation;

    It is important to install the kitchen in such a way that sunlight does not fall directly on the glossy facade. This will help to preserve the brightness of the color of the kitchen for a long time.

  • Do not install near heating appliances, incandescent lamps and do not allow heating above 70 ° C;

    Many glossy materials are resistant to temperature effects, as well as to fading.

  • Install good kitchen hood– regular use of forced ventilation will eliminate excess moisture from the room air and pungent odors that occur after the use of certain substances.

    If you want to provide the cleanest air in the kitchen without fumes, grease and odors, then you need a quality hood.

ATTENTION! Abrasive detergents and tough woven fabrics are taboo for any glossy surface.

Make sure that the products do not have a dissolving and corrosive effect.

Remember that almost all coatings of glossy facades are contraindicated:

  • Solvents - white spirit, turpentine, acetone;
  • Nitroglycerine;
  • Alcohol;
  • Ammonia;
  • polymer resins;
  • Grandma's recipes based on soda and salt.

The range of detergents is now simply huge, so it is important to know how to wash a glossy kitchen set so as not to spoil it.

Use the melamine sponge with great care. It perfectly removes marks from felt-tip pens and markers, but is completely unsuitable for acrylic and varnish surfaces.

If you decide to use it, then wet it and squeeze it properly before use.

Wipe the contaminated area with light pressure. Vigorous rubbing of a defect can lead to scratches and destruction of the sponge. When finished, wipe it with a slightly damp, clean cloth.

Use the softest sponges designed for gloss or glass.

IMPORTANT! Melamine particles that enter the body provoke the development of urolithiasis.

The rules for caring for glossy facades depend on the materials from which they are made.

PVC film

She's afraid of everything high temperatures and humidity, rough mechanical and chemical impact and abrasive additives.

PVC film should never be washed with a very damp cloth.

Also, the formation of cracks and peeling of the film can be caused by:

  • The action of bright lighting fixtures;
  • Temperature below -15°C.

To prevent peeling of the film from the facade, try to wipe the surface with a not very damp cloth.

Decorative plastic (DBSP)

Waterproof and resistant to mechanical stress.

Kitchen with plastic coating, it is necessary to wash with gentle detergents.

But defenseless against the action of chemically active substances:

  • Chlorine-based substances "wash out" the color from such a material;
  • Wax polishes turn into a sticky film that is difficult to remove;
  • From alcohol-based compounds, the gloss becomes dull;
  • Detergents containing acids form dirty indelible stains and streaks - therefore, no “domestos”, “comet” and “silita”.

Glossy plastic tends to lose color brightness, so be careful when choosing detergents.

acrylic plastic

It tolerates wet cleaning and can be polished. It does not fade in the sun, does not fade and is resistant to mechanical stress.

Pollution from such a surface is removed quite simply. These facades, when defects appear on them, can be polished.

However, it is also sensitive to the chemical composition of cleaning agents.

In no case should they be washed with aggressive detergents, as you can lose the shine of the glossy facade.

Painted MDF under varnish

Well made multi-layered lacquer coating, applied over enamel paint, does not flake off, does not leak moisture and does not fade from bright daylight.

Small defects during operation on a painted surface can be corrected, unlike plastic.

The scratched surface is easily restored. Does not tolerate melamine sponge and high temperatures.

But still, you need to try to avoid scratches to the maximum.

So that the furniture shines with cleanliness, and you - with delight

For careful and effective cleaning kitchen set from grease and dirt, use ordinary laundry soap. Grate it on a fine grater and dilute it in warm water until a soapy solution is formed.

To wash the plastic surface, without unnecessary damage, laundry soap diluted in water will help.

Clean up in three steps:

  • First, apply a solution to it;
  • Then wipe first with a wrung out wet and then dry cloth;
  • Be sure to ventilate the room.

Soap solution is the most harmless for glossy finishes of kitchen sets, but does not always give a good result.

For effective cleaning facades, many housewives quite successfully use:

  • Glass cleaners (without ammonia);
  • Special sprays for a glossy finish;
  • Detergents for shower cabins;
  • Shampoos and liquid soap;
  • Means for washing dishes;
  • Wax-free polishes;
  • Hydrogen peroxide.

To clean surfaces with a glossy facade, use non-abrasive detergents.

If you find a fresh grease stain or dirty streaks on the facade, then try to wipe them off by lightly pressing a flannel cloth moistened with glass cleaner.

For painted glossy facades, it is good to use a glass cleaner.

IMPORTANT! Carry out such cleaning as often as possible - and you will not have to heroically remove old defects.

The glossy facade will retain a radiant sheen for a long time if you handle it with care.

How to lower triglycerides in the blood in women with folk remedies?