Acrylic Brass Paint - protective, decorative paint with a metallic brass effect. Resistant to ultraviolet radiation and weathering, oils and gasoline. Has good adhesion and increased color stability. Withstands temperatures up to 80°C. Used on metal, plastics, wood and glass. Ideal for decorative purposes metal structures, for painting gates, forged products, for protecting and updating the appearance steel pipes etc.

METHOD OF APPLICATION. The surface to be prepared for painting must be dry and clean, free of rust and grease. For highly absorbent surfaces, it is recommended to apply a sealing layer (eg dispersion paint). Shake thoroughly for 2 minutes. Spray from a distance of 25-30cm using side-to-side movements. Operating temperature 18-25°C. The coating will be dry from dust in 10 minutes. Complete cure after 4-6 hours. Sufficient to cover approximately 3 m2.

ATTENTION. Pressurized cylinder. Protect from exposure sun rays and do not heat above 50°C. Dispose of empty cans and waste properly. Do not pierce or burn, even after use. Do not spray onto hot objects or flames. Keep away from sources of ignition. No smoking. Work in a well-ventilated area. Do not inhale fumes. In case of contact with eyes, rinse clean water. Do not allow it to enter the sewer or groundwater. Keep away from children.

Manufactured by Eckart GMBH, Germany. Volume 400ml

Additional option

Meaning additional option

IN MOSCOW AND MO:

Pickup:

The order can be picked up at the address: Volokolamsk highway, 87, b.1 on weekdays from 10:00 to 19:00. Delivery of goods on weekends by prior agreement.

• From Tushinskaya metro station: any bus to the stop "Academy of Communal Services"
• From Volokolamskaya metro station: bus No. 2, 904, 266, 614, 741, 248, 210, 930 to the stop "Academy of Communal Services"
• From Mitino metro station: bus No. 614, 741, 266, 930 to the stop "Academy of Communal Services"
• from Pyatnitskoye Shosse metro station: bus No. 2, 904, to the stop "Academy of Communal Services"

ATTENTION! Check product availability by phone before your trip!

By courier:

Available in Moscow within the Moscow Ring Road from Monday to Sunday from 10:00 to 21:00.

• Delivery time is 1-2 days from receipt of order.

Delivery cost in Moscow:

• 350 rub. when ordering less than RUB 1,000.
• 290 rub. when ordering more than 1000 rubles.

Delivery cost outside the Moscow Ring Road: 30 rubles/km + 300 rubles. (basic tariff).

To SDEK and Boxberry pick-up points

When ordering, you must select the most suitable item on the SDEK or Boxberry website and indicate it in the comments to the order, or we will clarify it by phone. Delivery time: 2-3 days / Delivery is paid.

Our managers will inform you about the completion of your order by phone or email. You determine your own convenient delivery date and time.

DELIVERY IN RUSSIA:

Cash on delivery (Russian Post):

• When delivering by cash on delivery, you pay for the goods upon receipt at the Russian Post office.
• Postal delivery is carried out by the Federal State Unitary Enterprise "Russian Post".
• Delivery time is approximately 5-15 days on average, depending on the remoteness of the delivery region.
• According to postal rules, the weight of the parcel should not exceed 10 kg. If exceeded, the order will be divided into several shipments.
• The cost of the delivery service depends on the weight of the ordered goods, their cost, current postal rates, and is calculated individually when placing each specific order at the stage of selecting delivery and payment methods.
• In order for your order to be completed quickly and efficiently, please indicate the exact postal address with zip code, full name of the recipient and contact phone number.
• Our managers will inform you about the completion of your order and the date of dispatch by email. According to postal rules, an item that is not claimed by the recipient within a month is returned to the sender. Please receive your orders by mail promptly.

ATTENTION! When choosing the "cash on delivery" delivery method, a partial prepayment is charged, which depends on the cost of sending to the destination and the cost of the goods.

SDEK courier service

More information about SDEK company

Courier service Boxberry company

Learn more about Boxberry. Please check with our managers for the cost and delivery time.

Transport company:

• We ship the order with the transport company you specify. Delivery to transport company within Moscow it is free. The order is paid before shipping, i.e. by prepayment.

PAYMENT

For cash:

• Payment is made at the delivery address, after inspecting the delivered goods and reading the accompanying documents. Payment of delivery costs is made simultaneously with payment for the goods. Payment for delivered goods is accepted only in rubles.
• You can refuse to purchase a product after it has been delivered. In this case, payment is taken only for delivery.

By bank card:

• Payments accepted bank cards VISA and Mastercard. You can pay by card through a terminal at the pick-up point or through the RosEvroBank electronic payment system (in this case, you will receive an email with payment instructions).

By bank transfer:

• For organizations, payment by bank transfer is possible with the provision of all necessary documents.

Payment by cash on delivery:

• Cash on delivery involves delivery by mail and payment upon receipt of the order. By choosing this method, you will have to additionally pay a commission from the Federal State Unitary Enterprise "Russian Post" in the amount of 4-7% of the cost of the order with delivery for sending money. When choosing this method, please pay attention to your full name. the client placing the order coincided with the data of the real Recipient.

RETURN OF GOODS

• Return of goods is made to the address: Moscow, Volokolamskoye Shosse, 97 from 13-00 to 17-00 from Tuesday to Thursday. We kindly ask you to coordinate your arrival time by phone in advance.
• Returns of goods from other regions are carried out by postal delivery. If the buyer refuses the goods of proper quality, the cost of delivery of the goods from the buyer to the seller is not refunded. Return cash carried out within 10 days from the date of receipt of the return kit at the store.

Metal products are susceptible to the influence of the external environment and especially humidity. Metal can be protected using special anti-corrosion coatings (for example, covering the surface with zinc), as well as painting. Paint not only acts as a protector against corrosion, but also gives the surface a more aesthetic appearance.

Decorative painting of metal allows you to imitate a wide variety of effects. For example, you can decorate the surface with bronze, silver, or give the metal an aged, noble look. How to choose a paint material, prepare the base and apply paint to it will be discussed below.

Surface preparation

First of all, you need to evaluate the strength of the old coating. Painting tape will help with this: we make cuts in the old paint and glue the tape to these places. Then, with a sharp movement, we tear off the tape. If a significant amount of paint comes off after the tape, the surface is not strong enough. If the layer is durable, then it is not necessary to remove it; you just need to clean the metal from dirt, traces of rust and dust.

Pay attention! If we are talking about heating radiators, the old paint must be removed, because... V in this case Each additional layer reduces thermal output.

Surface cleaning (metal, walls, etc.) can be carried out in one of three ways:

• mechanical (using abrasives or tools);
• chemical (using alkaline compounds or active solvents);
• thermal (using a hot air gun or an oxy-acetylene torch).

Padding

Surface treatment with a primer is necessary to create reliable adhesion between the metal and the paint. Primers are made on the basis of synthetic or natural film-forming substances (organic resins, drying oils, etc.).

An important property of primers is to reduce the likelihood of corrosion. Depending on the type of primer composition, the mechanisms for providing anti-corrosion protection differ.

There are several types of primers based on the nature of their anti-corrosion properties:

1. Insulating. Such primers do not allow moisture to reach the metal being protected.
2. Passivating. The effect of passivating compounds is based on reducing the electrochemical activity of the material.
3. Protective. Such primers contain highly dispersed metal powders, which electrode potential lower than that of the protected metal. This provides protection against corrosion.
4. Phosphating. A coating containing phosphates protects the metal from corrosion.
5. Inhibitory. An inhibitor is a substance that reduces the rate of development of chemical reactions. Since rust formation is the result of a chemical reaction, inhibitory primers reduce the rate of development of corrosion processes.
6. Rust converters. Rust converters transform iron oxide into an insoluble compound.

The primer composition is applied using a brush, roller, swab or spray. The primer layer should not be too thick - thinner than subsequent layers of paint. Optimal thickness primer layer - up to 0.1 millimeter.

If the primed surface is matte, it must be carefully sanded with fine-grained sandpaper. This will improve the quality of adhesion to the paint and varnish material.

Puttying is necessary to eliminate defects such as cracks, as well as to level the surface. The putty composition is a mixture that includes filler (chalk), plasticizer, binder, special additives.

Application of various putties

Putty mixtures are sold in one of two states - dry (diluted in water) and ready-to-use (diluted in solvent). The putty is applied and spread over the surface using a spatula.

Choosing paint for metal

Organosoluble paints are most often used for painting metal surfaces. paint and varnish materials. Such solutions are a mixture of synthetic resins of alkyd origin and organic solvents. White spirit or styrene are most often used as the latter.

After drying alkyd compositions thick, durable, transparent, almost colorless films appear. Such films are resistant to all kinds of chemicals, as well as moisture. Thanks to this latter quality, alkyds are found wide application not only indoors, but also outside buildings.

However, when choosing a composition, you should pay attention to the recommended purpose of the paint. For example, for painting batteries, special compositions are produced that have high thermal conductivity and do not reduce the heat transfer of the equipment.

For a long time, coloring was not used for forged metal. There was a generally accepted opinion that paint eliminated the advantage self made, hides the natural texture of the material.

However, not so long ago, paint and varnish materials for forged products appeared that make it possible to artificially age the material, create the appearance of patina, or achieve other visual effects. Also blacksmith paints protect metal from corrosive processes.

The main disadvantage is their cost. Like the creation of forged products, specialized paints cannot be called cheap.

Metal painting

You can apply paint using a brush, roller or spray. The number of required layers when painting is set by the manufacturer and depends on the hiding power of the paint. Hiding ability is the ability of a paint and varnish material to hide the color of the surface being treated. The hiding power is inversely proportional to the transparency of the paint and varnish material, that is, the more transparent the paint, the more of it will be needed.

Pay attention! The hiding power is indicated on the paint packaging and is determined by the material consumption per square meter.

Difficulties may arise when calculating the required amount of paint and varnish material. Manufacturing companies provide information on consumption per square meter. When it comes to painting flat surfaces, it is not difficult to calculate the consumption. However, we often have to deal with uneven surfaces- gratings, fences, figured parts, etc. In such cases, the calculations will have to be based on your own experience or the advice of the seller.

Bronze surface decoration has been used for a long time. However, until recently, such paints were made on an organic basis. Thus, the scope of use of such paints and varnishes was significantly narrowed due to the characteristic properties of organic solvents. unpleasant odor. In addition, such surfaces are not resistant to temperature changes.

Today, the most popular paints are water- and acrylic-based. Such compositions are characterized by safety, ease of use, resistance to high and low temperatures, as well as anti-corrosion resistance.

There are two ways to decorate a bronze surface. Below are two step-by-step instructions.

The first option is plain coloring:

1. We remove dirt and traces of rust from the surface. We carry out degreasing.
2. We prime the surface. This will improve the adhesive properties of the materials and, in addition, create a layer of polymer that will protect the surface from corrosion.
3. When the primer dries, apply 2-3 layers. Moreover, each layer can be applied only after the previous one has dried.

The second option is aged bronze:

1. We carry out preparatory activities the same as described in the first case. Then we prime the metal and paint it bronze.
2. We treat the grooves on the surface with patina. It can be translucent - this will allow you to control the level of darkness.
3. When the paint has dried, take a dry brush and glaze. To do this, apply light paint to the corners and protrusions in such a way as to create a scuffed effect.
4. After the layer has dried, apply a clear varnish to the metal.

You can give the metal an aged look in another way, using a craquelure primer and paint.

Instructions:

1. We clean the metal from dirt, traces of rust and grease.
2. Cover the cleaned and dry surface with paint and varnish material. For coloring we use a brush, since uneven coverage in this case is only beneficial.
3. When the paint is completely dry, apply a craquelure primer. This composition can be purchased at hardware store. After drying, a transparent polymer film will appear on the surface.
4. We create the main craquelure coating. The result of the work is aged metal with traces of rust. Moreover, small cracks - craquelures - will appear on the surface.

Coloring and low temperatures

Recommends painting surfaces at positive temperatures. It is believed that the minimum permissible temperature is 5 degrees above zero. However, there are situations when you need to paint a surface urgently, despite the thermometer readings. And in this case, high-quality coloring is possible if you adhere to a number of recommendations, which will be discussed below:

1. We clean the surface from ice, dust, dirt, rust and condensation. Moreover, standard cleaning procedures - mechanically- in this case it will not be enough. Even if very little condensation remains, all further efforts will not create high-quality coating. To dry the surface thoroughly, use a burner (gas or gasoline) or a heat gun.
2. At low temperatures the paint will dry 2-3 times longer. Based on this, it is necessary to protect the painted surface from environmental influences. Suitable for this polyethylene film and a heat gun.

Equally important for painting at low temperatures is choosing the right paint. The best option considered jelly-like alkyd enamels. Such compositions are distinguished by high adhesive qualities.

When painting metal products, two goals are pursued: protection against the formation of corrosive areas and giving the metal an aesthetic appearance. When implementing the last task, sometimes it is necessary to cover the surface in 2-3 layers. But the end result may not always be just painting. Sometimes metal products it is necessary to give original decorative effects, for example, the appearance of an aged object. For this purpose they use special technologies. Let's try to figure out how to paint antique metal and what is required for this.

You can achieve the effect of aged metal by using the main method - aging through the creation of a patina and the formation of abrasions. Patina is applied with special paints, but for metal, acrylic-based metallic compounds are more often used. In stores today there is a wide range of such paints; in addition to their decorative function, they also perform a protective function.

Available to choose from acrylic paints for aged metal, namely:

• brass;
• bronze;
• copper;
• gold.

Thanks to modern technologies, an aged effect can be given not only to metal surfaces. Often this painting is performed on plastic, wood and plaster products.

The aging process is completed by applying a final protective layer. For this they often use:

• acrylic-based varnish, which has a high degree of gloss;
• very durable polyurethane-based varnish with a gloss level of up to 50%;
• polyurethane based varnish with a matte effect.

How to age metal yourself?

The choice of method for creating an interior style, which assumes the presence of traces of antiquity in the design, is quite wide. For connoisseurs of this style, it is not always affordable to purchase real old items. The way out of this situation is to imitate ancient metals. How to properly paint antique metal with your own hands? Coloring is carried out in stages:

1. Preparing the surface for painting. We get rid of dirt, rust and traces of grease by grinding and solvent treatment.
2. Metal priming. In this way we achieve the formation of roughness on the surface for better adhesion of the paint. We choose a primer special for metal.
3. Application of selected metallic paint. Experts advise performing the process using a regular brush, this way aging is achieved in the best possible way.
4. Aging stage. When the paint has dried, coat the surface with a special craquelure varnish. It is after this step metal object covered with cracks that create the effect of an old product.

Important! If non-metallic surfaces are being processed, then it is necessary to take a responsible approach to the choice of primer composition to achieve reliable adhesion with metallized paints.

On video: master class on applying patina to forged metal.

Bronze painting

In the old days, many objects were made of bronze. Therefore, painting products in bronze will help to decorate the interior of the house in an old style. There are several technologies for coating metal with bronze. Let's consider the simplest options.

Giving a monochromatic effect

You can perform a single-color coating of metal with bronze as follows:

1. First of all, we clean the old surface from dirt and rust. To do this, you need to clean it using sandpaper and then carry out degreasing.
2. To increase the adhesion of the dye to the surface, we perform a metal priming process. In addition to adhesion, the primer will help further protect the product from corrosion.
3. At the final stage, we begin painting with bronze paint. It is necessary to apply 2-3 layers evenly. But each subsequent layer is applied only after the previous one has completely dried.

Achieving the effect of antique bronze

Decorative antique painting with a bronze effect is suitable for lovers of rare things. To do this, follow these steps:

1. In progress preliminary preparation old surface according to the same rules as in the previous case. Also, do not forget to coat the product with a primer.
2. After priming, one layer of bronze paint is applied to the surface. It is desirable that the composition be applied evenly, but for an antique effect it is better to use a brush.
3. After drying, the bronze painted surface becomes covered with a patina (paint more dark color). It is applied to the recesses. Experts advise using a translucent patina. This allows you to adjust the shade of the bronze coating.
4. The next stage is glazing, that is, processing with a brush that is barely moistened with light paint. The process is carried out on all protruding edges and corners. This method aging allows you to give the product the effect of wear and tear, which usually appears on metal over the years.
5. Next, we wait a while, allowing the applied materials to dry completely, and finally we coat the product with transparent varnish.

Antique Brass Painting

Textured metallized compositions can transform a product, giving it an imitation of brass. The processing technology is almost no different from those provided above. The surface is pre-cleaned, sanded and degreased. The technique used for aging is decorative painting brass look

The application process is carried out as follows:

1. Before applying decorative paint, the old coating is removed from the product. To do this, you can use a wire brush or sandpaper.
2. The key to durability and reliability of painting is the primer. Use a compound specifically designed for metal.
3. Apply to the surface brass paint in one layer. You can age the resulting coating by painting it with craquelure. Burnt umber, which is applied very carefully using a dry cloth, will help enhance the effect. If excess is formed during the work, it must be removed before the substance dries.
4. Finally, the surface of the painted and aged part is coated with a glossy acrylic-based varnish.

As you can see, designer antiquity is achieved in simple ways. When doing work with your own hands, paints that create the necessary effect of a bronze, brass, or copper surface help you get the desired result.

We offer painting with metallic paints:

• Brass look;
• Bronze;
• Under copper;
• Under gold;
  
• Aged metal;

One of the services of our workshop is painting of various products with imitation of natural metals with the effect of patina and aging. The technology allows you to apply metallic paint to almost all types of surfaces: metal, plastic, wood, plaster.

brass paint samples

When choosing the required painting option, you can be guided by the samples presented at our production. It is also possible to select paint according to the customer’s sample.

The quality of the finishing coating is ensured by the varnish:

• acrylic car varnish with high degree gloss;
• high-strength polyurethane gloss varnish;
• matte polyurethane varnish with gloss level from 5 to 50%

To create an aging effect, we use solvent-based patina. The patina is applied over the base coat of paint and using various abrasive sponges, a sanding effect is created in different directions.

Painting the heated towel rail "brass".

painting chrome surface brass effect heated towel rail brass plating

Painting a heating radiator to look like brass.

bimetallic radiator
painting a radiator to look like brass
finishing layer- glossy varnish

Below in the photo is painting of bathroom fittings “bronze” with a patina effect. Gloss varnish finish.

bronze painting of products finishing layer - acrylic varnish antique bronze finish

The chrome plating is removed before painting.

repainting chrome to bronze applying primer painting bronze fittings

Coating chrome handles in aged bronze.

painting door handles in bronze aged bronze handles finishing coat varnish

Painting of installations, drain buttons.
The photo shows samples of painting with the “Antique Brass” effect under glossy and matte varnish.

brass-look drain buttons painting buttons to look like brass
repainting the button in brass (glossy varnish)

Grohe button painted brass
GEBERIT button before painting
painting the button in brass (matte varnish)

Painting the shower cabin to look like antique brass.
Initially, the cabin parts were chrome-plated, with anodized aluminum profiles.

painting aluminum profiles
details after painting
painting a shower cabin in brass

Coloring commercial equipment in brass color.

work in painting booth
old brass surface
shop equipment after painting

Painting the sink bronze.
An excellent example of the durability and strength of polyurethane clear varnish is the painting of such mechanically loaded products as a kitchen sink. The sink is constantly exposed to mechanical stress. The varnish applied to the surface in three layers and completely polymerized (after painting for up to 10 days) perfectly withstands all loads.

washing before painting applying primer bronze sink painting

Repainting the decorative caps on the lantern to look like aged bronze.
To protect the streets lighting fixtures We made custom decorative caps for our customer. The products were originally white. Futile attempts at spray painting led to damage to the product. We had to sand the product and apply an insulating primer to prevent the first layers from being undermined. Next, the product was painted to resemble old bronze and coated with 2 layers of matte polyurethane varnish.

product before painting painting - antique bronze finishing layer - matte varnish

Copper-like painting
The metal housings of the restaurant lamps were painted.

metal lamp copper painting
copper painted lamp

Painting the rotary stand parts to look like “antique brass”.
By order of the Petersburg Doors company, elements of commercial equipment were painted to resemble antique brass. The parts of the rotary stand were previously cleaned and primed. Painted using decorative sanding technology. Acrylic car varnish has an excellent gloss level and is quite durable.

products in the painting booth painting products to look like brass glossy varnish coating

To change the texture and give interior items a noble look, special paints are increasingly being used to achieve the effect of a “metallic” surface.

Metallized paints are available in a wide range color scheme and can imitate the shade of almost any metal. The finished surface acquires the color of brass, bronze, copper or gold, and additional treatment with craquelure varnish gives household items a unique antique look.

Advantages of metallized paints:

• Large selection of shades. You can get the effect of bronze, brass, copper or other metal.
• Used for external and interior works, wall decoration. Do not contain harmful substances and toxins.
• They are durable and do not fade over time.
• Painting products in damp areas.

Such textured paints are used for interior decoration and decoration. various items household items, including furniture, picture frames, candlesticks, etc. Interesting solutions can be obtained by finishing plumbing fixtures, mirror frames or other “bronze” or “copper” individual elements interior

You can cover a fireplace, stucco molding or part of a wall with metallic paint, while the painted surface will highlight how classic style, and will perfectly complement retro-style design or ultra-modern high-tech.

Application technology

If metallic paint is applied to interior items or furniture, then it is necessary to remove the old coating in advance. Before finishing, the surface should be cleaned of possible contamination and apply primer. The key to the durability of painted products is, first of all, the use of correct, high-quality primers for various surfaces: for plastic Plast Prime and for metal Acid 8.

The selected composition is applied in accordance with the manufacturer's instructions, usually to obtain desired effect One layer is enough. A metal-finished design element can be left shiny or given an antique look with the help of a craquelure composition. The characteristic cracks that appear during the drying process of such varnish will artificially age the treated surface.

The resulting effect can be emphasized with burnt umber, which is carefully applied to a dry cloth. The excess should be removed before the composition dries completely, and if desired, cover the metallic finish with a layer of varnish.

Painting metal bronze can not only protect the material from exposure to excessive humidity, which contributes to the appearance and spread of corrosion, but also give its appearance a fair amount of richness and solidity.

This type of work is available to anyone who has the necessary desire and sufficient time. The subtleties this process we will look at in this article.

Choosing the right solution

For a long time, any bronze paint had in its structure organic solvent. Its presence contributed to the spread of an unpleasant specific odor, which significantly limited the scope of such solutions.

Nowadays, thanks to technological progress, water-soluble mixtures containing natural metal pigments have appeared. Acrylates act as binders in such solutions.

Water-based bronze paint (don't be confused - this is not Zinga conductive paint)

Acrylic bronze paint for metal has many advantages:

• Ecological cleanliness and absence of any unpleasant odors. During the drying process, only water vapor is released.
• Relatively low price. Using H2O as a base makes it much cheaper to produce, for example, oil analogues.
• Awesome appearance non-ferrous metal. It is also possible to apply it using the “antique” method, which will create an even greater natural effect.

• Easy to use with your own hands. The application technology is not much different from using conventional paint and is quite feasible for an amateur.

• Moisture insulation. Qualitatively protects metal from rust.

Tip: pre-applied electrically conductive paint Z inga will maximize the protection of iron from corrosion, as it will create a reliable thin-film galvanizing layer.

• High strength to mechanical stress and ultraviolet radiation. For many years this finish will have its original appearance.
• Long service life. At correct operation at least ten years.

Advice: if there are many fire hazards in the room, it is recommended to additionally use fire-retardant metal paints Polistil. They have the ability to foam when a fire occurs, preventing its further spread.

Applying paint

First of all, careful surface preparation is required, the main step of which is removing traces of rust. If you apply paints and varnishes over areas damaged by corrosion, this will not protect the metal from premature destruction.

Preparatory work

The instructions are:

1. We remove old paint and rust.

To do this, you can use one of the following methods:

• Mechanical removal. Use a wire brush or abrasive discs. Suitable for rough surface treatment only.

Advice: be sure to have funds personal protection before starting work. Metal dust, which will rise into the air during operation, is incredibly harmful to the respiratory system and human mucous membranes.

• Sandblasting equipment. Available under high pressure grains of sand will cope perfectly with rust, scale and old paint even in the most hard to reach places. The only negative is the relatively high cost of the device.

• Chemical reagents. Pour over the surface special composition, which will go with the old cladding and rust into chemical reaction. After that, the remnants of the former coating can be easily removed with a rag.

1. We clean the iron from all generated debris, regardless of what removal method was used before.
2. Apply a couple of layers of primer. This way we will increase adhesion metal surface and create an additional polymer layer of moisture protection.

After the last layer of primer has completely hardened, you can proceed to the next stage.

Painting

1. In the first case, you will end up with a monochromatic coating.

To do this:

• We dilute the purchased mixture with water or white spirit according to the instructions included with the jar.
• For small, extreme and hard-to-reach details we use brushes. Flat areas are possible.

• If necessary, after the first layer, apply another one to create a more saturated color.
• We bring a bright light source to the applied finish. If no stains are observed, it means the work was done efficiently and you can enjoy the result.

1. If you want to create an aged, then you should paint in several layers:

• First we apply a solid dark layer of metal or spray paint.