For many residents of the metropolis, the dacha has become a chance to escape from stuffy everyday life to the refreshing breath of nature. This is why everyone is so eager to get away from the city and forget about work and pressing problems at least for the weekend.

And most importantly, get a good night's sleep!

Yes, yes! Who doesn’t dream of relaxing and getting a good night’s sleep at the dacha? Fresh air, the aromas of flowers and wild herbs, the chirping of birds, all this sets you up for a wave of relaxation. Perhaps, in such conditions, no one would want to spend time in a stuffy house.

Why not sit comfortably right in the yard? A hammock, which combines convenience, simplicity, and reliability, will be a reliable help in this matter.

Unpretentious plant, which will decorate the garden behind the plant, its propagation and much more are discussed in our article. A rocking chair is an excellent place to relax, but it is expensive. Find out how to make a rocking chair with your own hands - with photos and explanations.

What is a hammock?

Initially, the hammock was a small piece of mesh, which was attached at both ends. The resulting stock was very popular throughout the Caribbean.

Over time, they began to use a single piece of fabric for the hammock, which significantly increased its convenience and comfort.

Since then, for many years now, it has been used as a convenient stock, capable of quick carrying and easy transportation. This makes a hammock simply indispensable for a country holiday.

Choosing a place

The choice of place to install a hammock should be taken very seriously. After all, its correct functionality will depend on this.

The selected area should not be in a drafty area, so as not to get sick after a well-spent weekend.

It also needs to be fenced off from direct sun rays and places where water accumulates after rain.

As a rule, hammocks in the country are hung between two trees, choosing the most shady place on the territory. This arrangement of the bed brings a person closer to nature and gives him the opportunity to have a good rest.

Also, at the dacha, you can hang a hammock on pergolas or wooden canopies. The main thing is that their design is strong enough. In this case, you get shade from the sun, a roof over your head during rain, and the pleasure of a pleasant pastime - all in one.

Have you bought a hammock? How to properly hang a hammock at the dacha, watch our video:

More instructions:

Most popular types

Manufacturers are constantly working to create new types of hammocks. Everyone wants to make their product better, more convenient and comfortable, thereby attracting more consumers.

Today, the most popular among summer residents are three types of hammocks:

1. Suspension- This traditional look the hammock that everyone is used to. The main feature is practicality and reliability. They are easy to transport from place to place and can be quickly installed. It is enough to find two trees standing at the required distance from each other and hang the hammock, firmly securing it with tension parts. Instead of trees, you can also use poles.
2. Frame hammocks are also popular among summer residents. They have different shapes and any sizes. Main feature And distinctive feature is that they can be placed absolutely anywhere. To install a frame hammock, you don’t need to look for two trees or poles; it can be placed both at home and outdoors. They are prefabricated and stationary. The latter are especially durable, but you can’t take them with you on fishing or barbecue trips.
3. Non-standard types hammocks differ in their shape and cost.

A frame hammock is chosen by lovers of reliability and comfort

The most popular non-standard ones are:

• a hammock chair, where it is convenient to drink a cup of aromatic tea or work on a laptop;
• hammocks-swings, which are loved by little summer residents, and adults too;
• a hammock with a canopy that will protect from both the sun and rain, etc.

A good option is a children's hammock, covered with a mosquito net and a sun canopy. While the kids are sleeping on fresh air, parents can safely work on the site. The child is under the supervision of adults and is safe.

Pictured is a hammock chair

Hammock swing

We make it ourselves – easily and economically!

The hammock is quite exotic for the domestic summer resident, who, even recognizing beneficial properties the latter, is in no hurry to purchase it, since he considers this pleasure too expensive and troublesome to install.

Specialized stores offer quite a lot ready-made solutions for every taste and budget, but there is an easier way to increase the comfort of relaxation at the dacha - make a hammock for the dacha with your own hands.

This is quite simple to do, and the cost of materials will be minimal.

Choosing a shape and material is the first step

Anyone can handle the manufacturing process. First, you should decide on the materials for fasteners and stock. If the hammock is wicker, then it is better to give preference to natural fabrics. Synthetic material is more difficult to work with and less durable.

There are some requirements for a hammock with a solid fabric. So, for example, when choosing canvas, you need to be prepared for difficulties in sewing.

Having chosen the type of hammock and material, you can begin further manufacturing work, and very soon the finished product will not only please the eye, but also contribute to excellent relaxation.

From the drawing in the photo you can understand how to make a hammock with your own hands:

Step by step towards the goal

Manufacturing process:

1. Step 1. Blanks. To make the simplest hammock, you will need fabric (two pieces of 1x2 m), wooden blanks (two sticks one meter long), a cord (20 meters long), eyelets, metal rings for fastening holes on the fabric (10 pieces). The cord must be selected so that it can withstand required weight with a significant margin.
2. Step 2: Sewing. Two pieces of material are folded facing each other and sewn together. It is necessary to leave a pocket half a meter long through which the fabric will be turned inside out. Subsequently, filler, for example, padding polyester, can be added to the pocket. After this, the narrow edges of the material are folded ten centimeters and stitched. The folded edge of the material should face down when hanging the hammock. After the fabric has been stitched, it is necessary to notice the edge for the eyelets every 10 centimeters.
3. Step 3. Hinges and wood blanks. Eyelets are inserted into the holes made with a drill on the narrow edge. If they are not available, you can use ordinary metal rings or cord loops. Similar markings are made on the sticks with the same placement of loops on the fabric. Holes are drilled on the sticks so that the doubled cord can enter freely.
4. Step 4. Fasteners. A 10-meter piece of cord is cut into 10 pieces. Each of the segments is threaded into a stick, then into a loop or grommet and again into the same hole on a piece of wood. After which all the pieces of cord are gathered together and tied in a knot.

Making a hammock step by step

When attaching a hammock, it is necessary to take into account the reliability of the support. If trees are chosen as the basis, then they must have a trunk thickness of at least 0.2 meters.

The distance to the ground is a meter or one and a half. The hammock is attached to metal rings that need to be driven into the support. The fasteners can also be additionally secured with bolts.

The video shows in detail how to make a hammock with your own hands:

Frame hammock - reliability and simplicity

For those who value, above all, convenience and reliability, a hammock with a frame is suitable.

Making a frame for a hammock, which will serve as a support for the bed, is not at all as difficult as it seems. The material for the frame is most often metal, simply because it can withstand more weight.

Slightly less common wooden frames However, here it is necessary to take into account the type of wood, which is related to the ease of work and strength of the material. It is best to use oak or pine.

The simplest frame is two ordinary beams, dug half a meter into the ground. The length of the bars depends on the height at which the hammock hangs and the presence of an additional canopy over the bed.

If the hammock must be stationary, then the process of creating the frame will be as follows:

1. Step 1. It is necessary to prepare the following materials: two oblong planks at least a meter long (arched or straight with a standard cross-section), a block for fastening the racks, several blanks for the “legs” on which the structure will rest, bolts.
2. Step 2. The racks are attached to the beam, which acts as a base using bolts. Bolts and nuts must be galvanized or made of stainless steel. The fasteners must be reliable, so you should take extra bolts.
3. Step 3. The block on which the posts are attached is attached to the legs, after which the hammock is attached. To fasten the hammock, you need to use special hooks or simply fasten a metal ring to the bar. The design is easy to carry and, if necessary, can be quickly disassembled and reassembled.

The video below provides an overview and instructions for making a hammock chair.

In a word, making a hammock with your own hands is not at all difficult and not expensive. With just a little work you can get irreplaceable place for a holiday in the country.

Hammock hammock - discord

Convenience, comfort, reliability and lightness are the undeniable advantages of a properly installed hammock.

It is important to hang or place the hammock in the very beautiful area garden. This could be an area near the pool, the main thing is that there is a picturesque view and as little noise as possible. After all, this is a place for your relaxation. And relaxing while enjoying the beauty of nature is doubly beneficial!

Today it is quite difficult to imagine a full-fledged comfortable summer holiday on a country site without a hammock. Hammocks in the country are very comfortable and practical; you can sunbathe on them, read a book, or just take a nap in the fresh air. In addition, you can make an original hammock with your own hands, you just need to put in a little effort.

Types of hammocks

Among modern hammocks, there are several types of products that differ in their qualities and technical characteristics.

Hammocks with frame. Such designs are very popular, so you can see them in many areas. The main advantage of hammocks with a frame is the ability to place them almost anywhere: near the house, in the garden, on the river bank, etc.

Frame hammocks can be prefabricated or stationary. The latter option is more reliable and stable, but transporting this product can cause problems. Prefabricated hammocks are no different high level reliability, since they are made from more fragile materials, however, such hammocks can be easily disassembled and transported from place to place. Hammocks with a frame can have various shapes and color design.

Hanging hammocks. These models can be considered classic, since people first began to use them. Positive characteristics include versatility, the presence of a synthetic base that does not allow moisture to pass through. The use of a mosquito net will be especially important in warm evening hours, when mosquitoes fly out to hunt.

You can build a hanging hammock for your summer house with your own hands. To do this, just find two trees standing next to each other and attach the base to their trunks. Tension elements or carabiners are used as fasteners. If there are no suitable trees nearby, then poles are used to create a hammock.

Hammock chair. This product is in high demand because it is practical and versatile. The presence of a hammock chair brings additional convenience to a simple stay in the fresh air.

This hammock model can be large in size, which will especially appeal to people who relax with a group of friends. The comfortable base can accommodate several people at the same time. Here you can chat while swaying slightly or drink a glass of lemonade. The cost of hammock chairs will be slightly higher than other varieties, especially if such a hammock is equipped additional accessories and accessories. It is possible to make a hammock chair with your own hands.

Hammocks-swings. Such hammocks have a rather unusual design, which makes them original decoration any summer cottage. The fulcrum for hammock chairs can be the same trees and a seat; the main condition is the ability to swing freely. Modern models Such hammocks can take on the most bizarre shapes and have a variety of designs.

Rules for using a hammock

As you can see, there are a great many modifications and varieties of hammocks. However, they all require compliance certain rules operations that can protect you from various negative situations and make your vacation truly enjoyable.

Consider these rules:

• First of all, after installing any hammock, you need to check its stability and reliability of the fastenings. Trees or poles on which the entire structure is supported must have a diameter of 20 cm. The poles are dug into the ground approximately 1 m. You should not use a product that sag a lot, as this will only damage the base of the hammock;
• As for the distances, between the supports of the hammock it ranges from 3 m, and the fastening from the ground is 1 - 1.5 m;
• The reliability of the fastenings must be checked in advance. The cables that bear the entire load must have a diameter of at least 8 mm.

Advice! To achieve an even greater level of safety, experts recommend using eyelets. There are times when their use is impossible - it all depends on the specific hammock model.

• The base of the hammock should consist of durable, dense fabrics - tarpaulin or camouflage. You should not skimp on fabric, as it can protect you from injury if you fall. The matter needs to be replaced every 2 - 3 years;
• In order to make a hammock from a mesh with your own hands, it is best to use cotton threads that do not fray, do not slip and are tightened quite tightly.

Decorating a hammock

After the hammock has been purchased and installed or built yourself, you can take care of decorating it. The design itself is considered a good decoration suburban area, however, there is no limit to perfection. Hammocks are often decorated with canopies made of transparent or thick fabrics, which perform not only an aesthetic, but also a practical function - they protect from bright sun rays and wind.

To achieve comfortable conditions The hammock is equipped with additional soft pillows, painted in bright colors. Ribbons will also be an excellent decoration that will make the hammock design elegant, light and airy.

How to make a hammock with your own hands?

Method No. 1

In order to make a hanging hammock with your own hands, it is enough to acquire strong ropes and reliable material suitable color and a sewing machine. No special skills are required for this work.

1. Preparing the base

The dimensions of the base for the hammock are calculated in accordance with the height of the person, and for an allowance on both sides, another 60 cm should be added to these indicators.

The uneven edges of the material are cut off, and on both narrow sides places for mounting the drawstring are marked. To do this, 30 cm incisions are made at a distance of 18 cm from each other.

Materials for a hammock Possible hammock layout Elements of a hammock

1. Making drawstrings

The drawstrings are located along the edges of the material on its narrower sides. This is where the ropes are pulled. The cuts in 2 layers are folded and stitched with double seams. The ends of the seams are securely fastened.

1. Making loops and installing rope

Let's look at how you can weave a hammock with your own hands. The rope must be threaded into the ready-made drawstrings, leaving a margin of approximately 180 cm; it is pulled through the cuts for 1 m. To make a hammock, you will need about 40 m of rope.

Creating loops

The ends of the rope are tied two at a time on one side, and four loops are pulled out in the middle, which must be wrapped in rope and gathered together. It will take about 10 m of rope to make a good winding. Before joining, the loops are straightened and tied together top part bending As for the transverse winding, it should be carried out only after all the longitudinal loops have been laid and the rope has been secured. Longitudinal loops are made from thinner rope, the length of which will be slightly less than half a meter.

A longitudinal loop is necessary to securely fix the ends of the winding. The remaining winding threads at the end of the work are crossed with each other and pressed tightly. Next, a rope is pulled through the securing loop, and then the longitudinal part is wound. When work with the load-bearing loop is completed, you should connect the two remaining ends of the rope and wrap them together. After creating two turns, tie the remaining ends of the rope tightly.

1. Installation

As mentioned earlier, the most in a simple way installation of a hanging hammock is to attach it to two rows standing trees. The main condition is that the fastening must be strong and reliable. In addition, poles dug into the ground provide excellent support, as does a stand for a homemade hammock.

1. Registration

For a comfortable rest in a hammock, you need to use soft, comfortable pillows that you can sew yourself using holofiber, down or padding polyester as a filler. It is better if the pillows are painted in a color contrasting with the color of the hammock itself.

Method number 2

If you are still tormented by the question of how to make a hammock with your own hands, then you can use the second one no less in an accessible way. To do this you will need the following materials:

• Approximately 2.5 m of durable tarpaulin or other material;
• 20 eyelets, as well as tools for their installation;
• 35 m of rope with a diameter of 6 mm;
• A pair of large metal rings;
• Drill and drill bit 12 mm;
• A pair of bars from hard rocks wood with a size of 30x50. The length of these products should correspond to the width of the future hammock;
• Sewing machine.

1. Preparing the base

After selection suitable fabric it is necessary to measure and cut a piece 2.7 m long. If the structure is located under a canopy, you can not take into account the resistance of the material to getting wet. If the hammock will stand without a roof, then this factor must be taken into account.

The edges of the fabric must be folded and stitched using sewing machine. The fabric is folded up by about 6 cm. For more convenient stitching, the rolled tip is ironed, then re-folded and ironed again.

We fix the spacer on the frame

The length of the bars is measured depending on the width of the hammock. The through holes in the beams must exactly coincide with the location of the eyelets. The thickness of the products must be at least 25 mm, any width can be selected (from 50 to 120 mm). The finished spacers are sanded and coated with a varnish composition.

Installing a hammock

Initially, the hammock slings are installed; to simplify the process, a special frame is often made, but you can also do without it. To do this, a metal ring is fixed on the hook, and the canvas is laid out on the floor and secured in place with something heavy.

A spacer is mounted on the frame. Each line must pass through a specific grommet, then through a hole made in the spacer and a ring, and then the rope comes back. Once the tying is completed, the ends of the rope are tied. If desired, you can braid a metal ring with the ends of the strings to give it finished product more attractive appearance.

Exactly the same manipulations must be carried out with the other end of the hammock. The hammock is hung on any supports suitable for these purposes.

DIY hammock stand

Unfortunately, not in every yard you can find a couple of trees located in cozy corner, and even at the required distance from each other. The optimal solution to this problem is to create a hammock stand with your own hands.

This design has many advantages:

• it is light, mobile and compact, it is easy to transport it to any place in the summer cottage;
• quickly made with your own hands from available materials, the cost of which is significantly lower than the price of a ready-made hammock frame;
• it is durable and attractive in appearance.

Required materials and tools:

• wooden beams with a section of 80x80;
• board with a section of 100x30;
• studs, nuts, washers for fastening;
• grinding machine, circular saw, drill;
• wood stain or varnish;
• hooks for securing the fabric.

DIY hammock frame step by step. photo

Lower, support part the rack will consist of two longitudinal beams of 3 m each and two crossbars of 1.5 m each. The side part - 2 fastening beams (beam 2 m long) and 2 stops (beam 1.45 m long).

hammock frame drawing. Photo

The first stage is the manufacture of the jib - the side part of the stand on which the hammock fabric will be attached using hooks. To do this, the beam and the stop are rigidly fastened to each other and cut off at the bottom in such a way that a vertical, but at the same time stable structure is obtained with a camber at the upper points of at least 4 m.

The resulting side parts are installed and secured vertically between two longitudinal beams. Their location should be mirrored relative to each other.

The crossbar consists of 2 pieces of board (1.3 and 1.5 m), which are located one on top of the other to ensure better stability.

On final stage longitudinal beams fastened to crossbars at a distance of 60 cm from each edge.

We sand it, cover it with stain or varnish - and the frame for the hammock with your own hands is ready. All that remains is to secure the canvas.

DIY hammock frame

hammock frame drawing 2

You can also make a slightly different design, which some find more convenient. The materials and tools are the same as in the first case.

DIY hammock frame step by step. Photo

The difference between this frame is the method of manufacturing the jib and the presence of a small handle for comfortable lifting from a lying position.

Thus, making a hammock stand with your own hands is not at all difficult. And enjoying the result of your work will be doubly pleasant.

Photos of hammocks

In the presented photos you can see what hammocks related to different types. You can notice significant differences in the design of the products, as well as in their design and methods of decoration. All these photos can be used to build a hammock with your own hands.

How to make a hammock with your own hands - video

In order to make a hammock with your own hands, you don’t have to be an expert in construction industry, since the video shows and describes the work process in great detail. Now to enjoy good rest At the dacha you only need to put in a little effort. Follow the recommendations and instructions - and everything will definitely work out!

Hammock - excellent remedy for recreation, the history of which goes back to the distant past. It is used both at home and outdoors. Relaxing in it is comfortable and pleasant. Make a hammock with your own hands using different materials, very easy.

General information

The history of the appearance of the hammock in Europe is associated with the name of the famous discoverer Christopher Columbus. It was he who brought this exotic device from the Bahamas and showed it to the Europeans. Residents of the Bahamas used these wicker nets for sleeping, hanging such “cradles” between trees.

This use of hammocks appealed to the sailors, who during the voyage went to sleep in them instead of hard shelves and floors.

Currently, hammocks can be found on personal plots country houses and in comfortable apartments. The variety of these products allows you to choose the one that will meet all the requirements of a country resident or owner of city housing.

On a hammock you can:

• relax, relieve stress;
• sleep in the fresh air, and to a small child Same;
• read books, have pleasant conversations with friends or family.

Adults using a hammock for relaxation may unknowingly make some mistakes. You should not lie down in it, taking a position along the length of the entire structure. In this case, the hammock panel will not give you the opportunity to breathe freely and enjoy the beauty of the surrounding nature, since it will completely envelop you. The ideal position in a hammock is diagonal, in this position you can fully feel everything positive aspects relaxing in a hammock.

Types of hammocks

These products can be classified according to different parameters.

The sizes of hammocks are:

• family (width from 180 cm). A hammock can become a place where all family members will gather, share news, discuss future plans;
• for two (width from 160 cm). In such a hammock you can be alone with your loved one, have intimate conversations with girlfriends, or talk like a man to father and son;
• for one (from 140 cm wide). Sitting comfortably in a hammock alone, you can enjoy the peace and tranquility, read a book that has been put aside for a long time, think about painful things, or just get some sleep.

Depending on the shape:

• in the form of cocoons;
• round;
• hanging chairs.

Cocoons are the simplest design of this device. They weigh a little, they can be easily carried and taken with you on trips and hikes. It is almost impossible to fall out of such a hammock, since they “envelop” the body and help you completely relax. But changing your position requires a lot of effort; the process of climbing will also require special skill.

Round hammocks and hanging chairs are more suitable for sitting. Often such forms are used to construct swing hammocks. By making such a large size model, you can have a good time with your friends.

Hammocks are classified according to their historical homeland:

1. Colombian. They are made from local raw materials - vines or specially processed agave bark, hamaka. The secret of weaving is not revealed. All devices are painted in bright colors using only natural dyes.
2. Brazilian. Such leisure items are woven from cotton or from raw materials obtained from splitting the woody part of the Brazil nut. These hammocks are highly durable. The indicator of the wealth of such hanging devices- beautiful fringe, made by yourself.
3. Mexican - fabric hammocks made of synthetic fabric. They can last a very long time without losing their functionality and bright colors.

Separately, it is worth noting Soviet hammocks. They were made by weaving ropes. In appearance, they were practically no different from volleyball nets.

Modern hammocks most often have a stand. They meet all the requirements of reliability and comfort, look stylish and will fit perfectly into the interior of the 21st century.

All types of hammocks can be bought, but from people with with skillful hands It is possible to make such a chair-bed yourself. The product can be made in different techniques: sewing, knitting, macrame weaving. In this case, you can use both fabrics and strong threads, ropes, old strong things (jeans, coats).

For the construction of suspended structures, it is possible to choose materials that are not so familiar for hammocks, for example, wooden pallets or awning.

How to choose material for a home hammock

Choice appearance DIY hammock depends on your skills. If you know how to sew, go for a fabric product, if you like to knit unusual things, go for a knitted one; you know the basics of weaving macrame - from ropes.

If the manufacturing method does not make much difference for you, then you need to weigh the pros and cons of using this or that material.

Fabric product

The advantages of a fabric hammock are that the solid fabric has no gaps, it is not blown, you can put any small object on it without fear of it falling and breaking or getting lost (for example, a watch, tablet, cell phone).

Hammock made of threads, cord

A hammock, knitted or woven from threads, can become not only a cozy place to relax, but also a wonderful interior decoration or landscape design. All guests who see such a creative structure will be delighted and will remember it for a long time.

Naturally, materials for knitting and weaving must be especially durable. It is advisable that the yarn or ropes be cotton, since lying or sitting in a hammock made of synthetic material is not so comfortable.

When choosing other materials for a hammock, you must take into account:

• strength;
• aesthetic appeal;
• absence of negative sensations upon contact.

In order for the product to last a long time, it is necessary to sew it from durable fabric - tarpaulin, canvas, mattress teak, calico, camouflage fabric, denim. When using synthetic materials you run a high risk of becoming covered in sticky sweat during hot weather because they don't allow air to pass through. An excellent option is to use canvas raincoats and jeans. For wicker hammocks, you can use various cords, jute ropes, and twines.

If the hammock is supposed to be covered or covered with something, then the threads may not be natural. The same applies to the choice of material for knitting.

The number of threads used in macrame depends on the knots chosen. All craftswomen who master such types of needlework as knitting and macrame will be able to easily calculate the required amount of yarn by making a preliminary sample of a fragment of a small hammock.

The materials used to install the hammock on site must be reliable and strong, so the choice of ropes and cords for fastening is no less important. To fasten a fabric product, you may need eyelets and special devices (anchor hooks, wooden planks).

Preparatory work

Preparatory stages of production suspended structure include selection, calculation of quantity and purchase of material, preparation the right tools, creating a weaving pattern, patterns for a future product.

Product drawing, determining the size of an outdoor hammock without a frame

It’s easy to make a fabric hammock pattern. Draw a rectangle with sides 230 cm and 150 cm (you must leave 4–6 cm on each side for hems). Based on this, we select the amount of fabric.

The length of the hammock should be greater than your height tall man your family by 60 cm.

If you are making a hammock using the macrame method, then it is advisable to find suitable scheme weaving. The pattern can be dense or mesh, it all depends on your imagination and skills.

You can knit a hammock either by knitting or crocheting. It is best to purchase thick, strong threads and take knitting needles and a hook of appropriate thickness. You can experiment and try to knit a product from ropes or strong cord.

Each craftswoman can choose a drawing at her own discretion. You can knit the hammock itself very simply (double crochet or garter stitch), and make beautiful openwork ruffles or fringe on the sides.

The amount of fabric is calculated taking into account the dimensions of the proposed structure. It’s better if you don’t skimp and take the material with a reserve. You can buy fabric, or you can use old things, stretchers. The main thing is that the product is not dilapidated.

What tools and equipment are needed

The tools you need to create a hammock with your own hands depend on the design you choose.

For a sewn product you will need:

• sewing machine;
• shovel or hand drill(for installing support posts);
• special device for installing eyelets.

To weave a hammock using the macrame method:

• scissors;
• measuring tape;
• sewing needle;
• drill (for attaching to supports);
• shovel or hand drill;
• hammer (for attaching the wicker base to the frame).

For knitting a hammock:

• hook or knitting needles;
• scissors;
• sewing needle;
• drill;
• shovel or hand drill.

All tools used must be in good working order. When working with them, you should follow safety rules.

Step-by-step instructions for making a homemade hanging fabric hammock

You will need:

• 2.5 m (or 20–30 cm more, depending on the person’s height) of dense fabric;
• 20 eyelets;
• 2 wooden bars(according to the width of the hammock);
• 2 large metal rings (for pulling lines);
• 2 metal hooks (for hanging);
• 20 m thick cord.

All work consists of several steps:

1. A pattern is created and the fabric is cut.
2. The edges of the fabric are folded to a width of 5–6 cm and stitched sewing machine along the entire perimeter of the future hammock. If the material “does not crumble”, then the bend can be made only on the sides of the structure fastening.
3. Markings are made on the short sides for eyelets (10 each).
4. Holes for eyelets are cut. You can use it for this stationery knife or small scissors.
5. Eyelets are installed. In this case, you need to try not to confuse and place front side these metal structures to the corresponding side of the hammock.
6. Holes are drilled on the prepared bars in the same places where the eyelets are placed. A cord is pulled through them. In this case, you need to adjust the tension by passing the cord sequentially through all the eyelets and the ring.
7. The hooks are driven into the supports. The hammock can be hung.

Video: how to weave a sitting hammock with your own hands

How to make the most beautiful hammock from mesh or tarpaulin

The product will look complete if you add some decorative elements or functional attributes.

By hemming the padding polyester or placing it between two layers of fabric, you will add comfort and coziness. You will be pleased to be in such a hammock; it will be quite soft. A blanket and pillows will also help achieve complete relaxation.

The functional qualities of the hammock will be enhanced if pockets are sewn to this device (for storing books, glasses, bottles of cool water). For knitted product You can provide removable or sewn openwork borders, and a beautiful strip along the entire hammock can be knitted or crocheted.

For a hammock woven using the macrame technique, fringe and tassels would be appropriate. The main condition is that they must be made of the same material as the product itself.

Bright, colored ribbons, woven or sewn into the product, will make it a noticeable and unique element of the interior. As decorative elements you can use large wooden beads; an excellent addition to the finished hammock would be a canvas stretched over this device, which can provide good protection from direct sunlight and drizzling rain.

Photo gallery: successful finishing of rope products

How to fix a hammock in the countryside on a ready-made base

It is very important not only to properly make a product for relaxation, but also to hang it correctly. The optimal parameters for strengthening a hammock are:

• height 1.5 m;
• width between supports 3 m.

The distance between the support posts is calculated depending on the length of the hammock and the size of the binding. You need to add 30 cm to the resulting value. For example, if the length of the hammock together with fasteners is 2.5 m, then the supports are strengthened at a distance of 2.8 m.

You can hang a hammock:

• between two trees;
• between the walls of buildings;
• under the ceiling (if the hammock is indoors);
• using specially created structures.

If it is not possible to make stands, and you have to use existing supports (tree trunks, fence posts), then hang the hammock in this way:

• if it sags a lot, then go higher;
• if it is too tight, then lower it.

How to hang a product on a tree or pole

Do not attach a hammock to thin trees. It is better to use wooden trunks with a volume of 20–30 cm for this. In order not to harm the tree, when attaching ropes around the trunk, you can place plastic or thick fabric under the cords.

You can use metal hooks that are mounted in the walls of suitable buildings, but you should not use this type of fastener for supports.

The ideal position of the hammock after hanging is the shape of a banana; this is the sagging that is considered optimal. Special frames, which can be purchased in stores or made independently, can be used as supporting fastenings.

Caring for a product made from scrap materials

Any product that is constantly used needs care. The hammock can be washed by machine (if there are no wooden slats) or by hand. The water temperature should not exceed 60°C, especially when synthetic products are used.

Items made from wool or very thick fabrics can be vacuumed.

To make the hammock last longer, try to remove it from the street for storage in winter.

You can easily and quickly make a hammock yourself. The main thing is to understand the principles of design, execution and fastening of this recreational device.

Making a frame for a hammock with your own hands is good idea. These products are quite expensive, but their design is simple. Therefore, creating a stand for a summer house yourself will not be difficult. You just need to choose suitable drawing, purchase some materials and spend a few hours of time.

A lot of effort will have to be put in if you need a stand with rounded shapes, as in the photo. In this case you need to have special tool for bending wood. This is quite labor-intensive and requires some experience. There are simpler drawings for beginners.

What to make it from?

A DIY hammock stand is made of wood or metal. The difficulty of working with both materials is approximately the same. Below are drawings of frames for summer cottages made of wood and metal.

Wood frame

The wooden support has a long service life, is quite durable and aesthetically attractive. It will become not only a useful item for a pleasant holiday, but also a decoration for the dacha.

For work you will need:

• saw, jigsaw or grinder;
• hammer, mallet;
• screwdriver;
• furniture conductor;
• clamps.

Materials:

• Wood. Beams and boards are required.
• Hardware – self-tapping screws, screws, nuts, washers, hooks (eyes).
• Furniture glue or PVA.

The stand is created in several stages:

1. Preparation of all parts of the future structure.
   • Base. Consists of two beams 1850 mm long and two boards 1500 mm long. Grooves are made on the beams at a distance of 200 mm from the edges. The depth is equal to the thickness of the boards used, the width is the width of the boards. At the ends of the beams, at a distance of 20–40 mm, holes are made for bolts. The beams are laid on boards parallel to each other at a distance equal to the thickness of the support beams used (on which the hammock will be hung). For better fixation, you can connect them using wood glue or PVA. In this case, the product must be clamped at the joints.
   • Supports. 2 beams 1700 mm long are required. At one end a cut is made at an angle of 45°, at the other there is a hole for a hook. 2 supports with a length of 520 mm are also made.
2. Opening with varnish. Since the stand will be used in the country, under open air, it can be opened alkyd compounds– the smell will dissipate fairly quickly. All openings must be protected before processing.
3. Assembly of the structure. If the parts are made correctly, then there will be no problems with assembly - the drawing provided above will allow you to complete the work without difficulty.

Metal frame

The presented drawing shows a stand made using metal pipes and special connecting elements. You can choose the dimensions of the support yourself, depending on the dimensions of the hammock and the amount of free space in the country house. The main thing is not to change the width of the support. The drawings indicate the optimal value that is guaranteed to make the product stable. The connection points can be additionally secured with through bolts. You can also cut threads.

Bentwood frame

This product is well suited for those who love complex tasks. The frame has simple design, the most difficult thing in the work is to bend the beams. To give wood a similar shape, it is necessary to soften, bend and dry it. There are several ways to make a material plastic:

• Steam finishing. The beams are loaded into a pre-prepared box, and steam is supplied to it. For every centimeter of beam thickness, approximately 1 hour of processing is required. You can also perform treatment with a steam generator.
• Soak in hot water.
• Use ammonia solution. How longer tree is in it, the more plastic it becomes.

After the required softness is achieved, the wood is bent. To do this, they either use special machines, or simply place the beam on supports, and place a load in the middle. The greater the bend and the longer the material, the higher the supports will be required.

With the arrival of warm spring days, summer residents try to spend as much time as possible on their plots. But after a grueling physical work It wouldn't hurt to rest. Unfortunately, not everyone has a fully equipped house in addition to a garden. Therefore, many people would like to use a hammock as a place to relax (photo 1). But then you have to decide how and where to hang it, choosing a suitable place. But there is another solution to this problem - you can make a stand for it and install it where it is most convenient.

Brief history

It turns out that the historical homeland of the hammock is America, and the direct inventors of the unusual bed are its indigenous inhabitants - the Indians. The reason for hanging places for rest and sleep was not the desire to soak up the light breeze of a fresh breeze, but the desire to protect yourself from snake bites and insects crawling on the ground. In addition, the climate made it quite possible not to think about significant temperature fluctuations within a day. Special credit also goes to the sailors who brought this invention to Europe. But in those days, only trees and other suitable vertical places were used as support and fastenings. More recently, people have realized that it is very convenient to have a hammock stand. Then the “bed” can be used both outdoors and indoors. Let's look at what types of stands there are and what the principle of their manufacture is. Using one of the models as an example, we will analyze the step-by-step procedure of work.

How to choose a hammock stand? Description of the most common types

All structures are classified primarily by external configuration:

Hanging;

Having a monolithic frame;

Mounted on a prefabricated stand.

The latter are the most convenient to use, as they take up minimal space and, if necessary, can be quickly assembled and installed. Most stands are made from metal or wood blocks. Designs and shapes vary. Among non-removable frames, those curved in the form of an arc are considered the most stable (photo 2). In addition to being practical, such models also have a very attractive appearance. Stands for “sitting” hammocks are slightly different in design.

How to make a hammock stand (photo 3)? Main stages of work

It’s quite easy to make a structure for securing a mesh bed at home. Let's consider in general outline what it should look like simple stand for a hammock. The dimensions given in this example are standard and can be changed depending on design features“lying” zone - length, depth, width of the canvas. All readings in the table are given in centimeters.

Part name				Number of parts
Horizontal bottom base
Transverse lower bases
Side diagonal guides
Oblique fasteners connecting the long base to the side parts		Top line -29 Bottom line - 17

Features of the technology for connecting some parts

When making a hammock stand with your own hands, you should pay attention special attention reliability of connection of all parts. If work is performed poorly, there is a danger at any moment, especially when swinging, of compromising the integrity of the structure, which can lead to injury from falling of something in the mesh. hanging bed person. Therefore, please note (using the example of photo 4) that when the diagonal guides are lengthened and, accordingly, the entire structure is raised, the load on the fastenings increases significantly. For greater reliability, use oblique slats, which are additionally attached to the top, connecting the base of the stand and the side part. You can also make two or three instead of one screw through hole, distributing them in several places on the lower support.

Choosing equipment for babies

When purchasing a children's hammock stand or making it yourself, you need to take into account the presence of several mandatory properties of the product:

Stands with a double base are considered the most reliable. So, for example, the product described above can be made slightly different - the diagonal guides can be supplemented with another part (which will make the “sidewalls” in the form of a triangle), and the load-bearing horizontal part can be supplemented with a parallel one.

Assembly reliability. It is most advisable to opt for complete structures, that is, assembled only once after purchase, and not constantly.

Practicality of the product. Many models, especially for the smallest ones, may additionally have a number of accessories - a protective mosquito net, a sun awning, a swing limiter, etc. Of course, such stands will have a higher cost. Therefore, when purchasing a product, check the general functionality.

As you can see, such a simple product as a hammock can become not only a useful item, but also quite a modern one. designer piece, capable of decorating any interior.