All photos from the article

Wood floors are very popular among developers due to a number of advantages of this material: environmentally friendly, hypoallergenic, attractive appearance, good thermal insulation properties and the ability to maintain optimal humidity in the room. In order for the structure to last as long as possible and look as good as possible, you should figure out what varnish to coat the wooden floor with, because there are many compositions, and each of them has its own characteristics.

But not only the composition matters, it is important to prepare the base and apply protective layer in accordance with technology, we will devote this review to these issues.

Types of compositions used for work

Let us immediately note that all products are divided according to the basis on which they are made, varnish for wooden floors can be made from organic and water based. The first option has a toxic odor during drying, but they allow you to create a very durable coating that perfectly resists abrasion and deformation. Water-based products are practically odorless, their advantages are ease of use with your own hands and an affordable price.

Wood floor varnish may differ in the type of resins present in the composition; the following options can be distinguished:

Alkyd compositions	This type is distinguished short term Once dry, they form a durable, abrasion-resistant film that can withstand fairly strong impacts. The main disadvantage can be considered low elasticity.
Acrylic solutions	They are made exclusively on a water basis, so they are very environmentally friendly and easy to use; you do not need complex instructions for preparing the varnish. The advantages include normal elasticity and fluidity at an affordable cost, while the disadvantages include poor resistance to abrasion and deformation.
Epoxy varnishes	This is an acid-curing product group that is used in areas where the most important indicator is the strength of the coating. But you should work with this type of product in a special protective respirator, since during the drying process toxins are released that are dangerous to human health. The drying process takes three days, during which it is not recommended to stay indoors.
Oil formulations	Made from organic oils and resins natural origin. There are no artificial components in the composition; they are often used for primary surface treatment. After drying, a durable layer is formed, the color of which can be brown or yellowish - depending on the additives.
Alcohol options	They are made on the basis of alcohol and natural resins - shellac or sandarac. Due to the rapid evaporation of alcohol and the low dissolution rates of resins, several layers can be applied to the floor over a short period of time. The result is a durable film with good shine; its biggest disadvantage is its poor resistance to water.
Polyurethane compounds	When asked which varnish is best to coat a wooden floor, most experts will answer that polyurethane-based products are the most preferable. This option is durable, has excellent abrasion resistance, and the coating is elastic. The only negative is the high cost, especially if the polymer wood varnish (as it is also called) is water-based.
Urethane and urethane-alkyd solutions	This option has slightly worse properties than the one described above, but its cost is much less. Urethane varnishes form an elastic film that is not damaged when wood is deformed and does not stick the ends together, thus not creating unnecessary stress. The addition of alkyd resins improves abrasion resistance.

Advice!
It is important that the varnish you purchase meets all standards and requirements, so be sure to inquire about the availability of a quality certificate and a hygiene certificate for a specific product.
This is the only way you can be guaranteed to purchase a high-quality coating for your wooden floor.

Criteria for selection and surface preparation

Let's consider which options are suitable for which rooms and how to properly prepare wood for painting so that the result is as durable and reliable as possible.

How to choose the best option

First of all, you should take into account in which room the work will be carried out; this determines which varnish to choose for a wooden floor:

• In living rooms, hallways, halls, as well as wooden stairs the main requirement for a coating is abrasion resistance, which is why it is recommended to use compounds based on organic solvents or a polyurethane group of products.

• What is the best varnish to cover wooden floors in the bathroom and kitchen?? Here, of course, the main criterion is resistance to moisture; it is best to use one of the following solutions: urethane and alkyd-urethane compositions, as well as polymer versions of the compositions.

All homeowners who have decided to choose natural wood as a decorative floor covering, at some point wonder what varnish to use for wooden floors made of pine, beech or oak. Sometimes such a choice turns out to be difficult, especially if you do not know all the characteristics of wood and varnishes, and do not take into account the degree of their interaction with each other. It is these nuances that will be discussed in our article. At the same time, we will find out what you need to pay attention to special attention when choosing compositions for processing the coating with your own hands and how to preserve the unique texture and pattern of wood.

What types of varnishes are there?

In addition to the aesthetic effect, varnish bases are very important mission– protect wood from the aggressive influence of the external environment, thereby preserving and highlighting its unique structure. The strength of the products themselves and their main characteristics depend on the resins included in their composition.

Aesthetic floor surface coating

Depending on the type of solvent used in the production of paints and varnishes, they can be divided into two types:

1. Organosoluble.
2. Water soluble.

In the first case, we will have to deal with a pungent odor and toxic emissions during the drying process of the material. The advantages of this product category include increased resistance to mechanical loads and impacts, as well as abrasion due to heavy traffic.

Applying the product to the surface

When applying such varnish with your own hands, you do not need to adhere to any special rules and requirements, the main thing is not to forget about the means personal protection– respiratory masks. IN in this case You will be able to use the room only after the characteristic odor has completely disappeared from it.

In turn, water-soluble varnishes are devoid of a pungent odor, since their drying process is accompanied by the release of water vapor of only a small amount of components included in the resins. This group has excellent performance properties, but only if the painting was done correctly, and the entire process was strictly observed.

Separately, I would like to say about children's rooms, because the varnish for the wooden floor in them should, first of all, be of high quality and safe. Products marked EN 71.3 have these characteristics, which indicates strict compliance with European standards applied to the production of children's toys.

Classification of resins

The main component of varnishes is resin, depending on the type of which, the compositions are divided into the following categories:

The varnish for a wooden floor made of oak, beech, pine or exotic woods that you plan to apply yourself can be selected according to its gloss level. For glossy and high-gloss decorative protective agents, this figure reaches from 80 to 90% (almost mirror image). For semi-gloss samples this value is at the level of 40 - 50%, while for matte and semi-matte varnishes the degree of gloss is minimal - only 10 - 15%.

Selection based on wood type

One of the essential criteria when choosing a floor covering is the type of wood that will be processed. The following information will help you choose the right foundation.

Hardwoods should be treated with products with good elasticity, which are possessed by polyurethane, urethane and alkyd-urethane bases. If the material contains tannins, then after their use the surface of the boards will most likely darken. To avoid such unpleasant consequences, before applying the coating yourself, do not forget to treat the floor with a special primer (cutting).

Paul from oak boards

Beech is an unstable type of wood, so here you also cannot do without a special primer, but with slightly different characteristics. For the protection and decoration of pine, and all coniferous trees in general, alkyd and urethane varnishes are chosen. According to the instructions, before the main stage of work, the floor must be wiped with a napkin soaked in gasoline - this procedure will dissolve the residues tree resin.

Pine board covering

To neutralize essential oils for specimens of exotic origin, it is used special composition, after which painting can be done with any type of varnish.

The only exceptions here will be those wood species that contain inhibitors that significantly slow down the drying process paint coating. And here again a cutting primer designed for working with heavy rocks will come to the rescue.

Varnishing the floor in different rooms

Moisture-resistant compounds are used for the bathroom

The purpose of the room is also taken into account when choosing coverage. Where frequent rearrangement of furniture and high traffic levels are planned, they rely on the durability of the varnish and choose expensive products. If the area is not exposed high attendance, you can find a less expensive and less sustainable option.

In a “wet area” (bathroom, kitchen, toilet, etc.), it is better to apply moisture-resistant materials yourself, which include urethane, polyurethane and urethane-alkyd bases. On steps, in reception areas, in halls and corridors, it is recommended to give preference to acid-hardening and polyurethane compositions.

Application technology

Before starting work you need to stock up necessary tool, for which we need:

Mechanical application of the composition

• polishing machine;
• abrasive;
• spatula;
• rollers and brushes;
• vacuum cleaner.

At mechanically They use a spray gun, and apply the coating with their own hands using a roller, swab, special spatula or brush. Before varnishing, the floor is thoroughly wiped and dried.

The main stages of work are as follows:

At least 2 layers must be applied

If the varnish does not want to dry, then this may happen for some reason. Firstly, you may have chosen a product that is not suitable for the type of wood, in which case you need to raise the temperature in the room. Secondly, the reason may be in the two-component product in which insufficient quantity hardener. Here the temperature cannot be avoided and the varnish will have to be sanded off. The varnish may dry slowly due to the fact that optimal ventilation is not provided, which means you need to worry about active air circulation. If all the work is done correctly, then your pine, oak, beech or exotic wood floor will last for many years without problems.

Working on a finished floor covering is considered very important, and what varnish to cover the floor with is important. This largely determines how long the floor will last without the need for cosmetic or even major repairs.
Nowadays for finishing For any floor, a variety of modern and high-quality coatings are used. But varnish is still the most popular. They are often used to cover wooden floors, including cork, parquet, etc. If the floors are made from high-quality planks, they will look luxurious and will last for a long time without any complaints. But you need to know what varnish to coat a parquet floor with so that the result is what you need.

Pine floors

Various types of wood are used to cover floors, but pine is considered one of the highest quality. It is preferred for its durability, strength and relatively low cost. However, if you don't know what varnish to cover the floor with, it won't look as good as it could. A pine wooden floor must be protected with high-quality varnish from static load and moisture.

When choosing which varnish to cover the floor with, you must pay attention to its transparency.

It is very important that the finishing coat does not spoil or obscure the natural texture and color of the pine. The craftsman also needs to take into account that to treat areas that will be most often subject to mechanical stress, you need to choose the most durable coating. If the question arises as to which varnish to cover a pine floor, then you need to choose the most durable option. The fact is that pine has a low density compared to many other tree species. That is, it may become somewhat deformed over time.

Features of varnish for pine

If we talk about what varnish to cover a wooden floor, then you should know that the varnish itself can be made from natural or synthetic materials. There are also differences in the type of coating, which can result in matte or glossy. As for what varnish to cover a pine floor with, you can choose any option. The main thing is that the varnish reliably protects the floor from mechanical stress, shock and moisture.

If the question arises as to which varnish is best to coat a pine wooden floor, you need to pay attention to the fact that it must be marked “For soft wood.” Moreover, working with pine flooring in mandatory provides pre-treatment prime a clean, dry surface. This is very important, otherwise the varnish from the pine floor will peel off quickly. In areas where there may be heavy resin release, special measures must be taken to prevent this process.

As for what varnish to cover OSB plate on the floor, parquet or wooden surface, experts recommend choosing varnishes based on urethane or polyurethane resins. They are being bred organic solvents. As a result, after applying such a coating, an elastic film remains on the surface, which protects well wooden elements from mechanical load. With such a coating, the floors will deform less and will last a very long time.

Working with cork flooring

Cork floor coverings can be either interlocking or adhesive. In the first case, the finished floor will look like laminate or parquet. Its installation is carried out using locks with which all elements are equipped. This coating should only be laid on a flat and clean surface. Any differences will not allow you to assemble all the elements normally. As for what varnish to coat a cork floor with, the peculiarity of such a base is that it absolutely does not require additional varnish treatment, since the panels are sold completely ready-made.

As for the adhesive floor, it can be laid out from ordinary cork parts. In order to save money, they are often purchased in an untreated varnish version. In this case, after all the elements of the cork floor have been laid out, you need to treat it with high-quality transparent varnish. There is no need to wait for the surface to cure; you can immediately begin applying the finishing layer. For this you can use the same varnish as for the pine floor.

How to varnish a wooden floor?

As for what varnish to cover a wooden floor with, nowadays the range of these products is very wide. It’s easy to get lost in all this variety, so the master needs to know the characteristics of the material, and also be sure to take into account the characteristics of the wood from which the floor will be made.

When choosing which varnish to cover the floor in the country house, you should take into account that the entire range finishing material: It can be water-soluble, alkyd, acrylic, anhydrous polyurethane, and acid-curing. Each type of material, as a rule, has a special marking that indicates whether a similar option can be used for a particular type of wood.

To varnish any floor, including parquet, you must carefully preparatory work. Only after preparing the floor, completely cleaning and drying it, can you begin the main process, that is, applying varnish. This will allow you to get the highest quality and most durable results.

The requirements for the preparation stage are very high, since the varnish has a transparent structure. That is, any speck on the floor surface will be visible after applying a layer of varnish. All this can significantly spoil the appearance finished work. It is best to collect garbage using a vacuum cleaner. This will give you a better guarantee that the floor will be absolutely clean.

After the main work, the floor needs to stand for about two days. After this, the surface must be cleaned and dried. The only exception is the adhesive coating made from cork. This floor should be varnished immediately after installation.

Many people are interested in what paint to paint a varnished floor, but it is best to clean the surface first, since one coating will not stick to another. First you will need to completely clean the floors down to the wood, and then use fresh varnish or paint.

As a rule, varnish is applied in 3 layers. This is much more convenient, and the coverage is more uniform. Professional craftsmen sometimes apply varnish in one thick layer, but this requires great skill.

As for the step-by-step application of varnish, it is worth sanding each preliminary layer with fine-grained sandpaper. Matting is performed in this way, which allows other layers of varnish to adhere better. The time period that must be maintained when performing the next step depends on the type of varnish and the recommendations indicated on the packaging.

It is necessary to work in a room where the air temperature is at least 15 degrees. Otherwise, the varnish may lie unevenly. Each subsequent layer should be applied across the previous one. During work, the master must leave a path along one wall from the window to the door. It will be painted over later, and in the process of doing the main work this gap will be very important. The master will move along it while working. If you forget about this point, then the person may be blocked in the corner until the varnish surface is completely dry. This may take up to 7 days, so do not forget about the need for a “path”. If on a cork or parquet floor After the varnish dries, a crack will appear; it can be removed using acrylic sealant.

When working on varnishing a wooden floor, you need to approach it very responsibly. It is necessary to immediately prepare everything that will be needed during this process. We are talking about a sufficient amount of varnish of one brand and type, as well as several rollers and brushes. To apply the varnish efficiently, you need to use rollers with a small pile that will not create unnecessary roughness on the surface. Brushes will be needed to cover thin areas of the floor. They must be durable and not fade under any circumstances.

The varnish must be shaken before use.

Important! As for what varnish to cover the floor in the country house and in other residential premises, experts recommend using acrylic or alkyd options, which are quite wear-resistant and do not have strong odors.

You should avoid varnish containing acids or solvents, as they can be hazardous to health. They are not used in houses and apartments. These options are only suitable for industrial use. They are toxic and especially dangerous when burning.

After the floor is varnished, do not rush to place furniture on it. It is advisable to let it sit for about a week. This will allow finishing coating harden well enough.

Choosing a varnish for a pine floor is a very responsible procedure, because not only the appearance of the coating, but also the duration of its operation depends on its quality. The selected solution must reliably protect the wood from mold, fungi, chemical (mechanical) damage and other negative factors.

Choosing a varnish

Varnish for wooden floors is selected based on the operating conditions of the coating

Self-installation flooring involves its subsequent processing with your own hands. Having decided to lay a wooden floor, you need to immediately attend to the purchase suitable varnish. The main selection criteria are determined based on the operating conditions of the board.

Main selection criteria

When choosing the ideal varnish for a pine floor, you should consider the following factors:

• Load level on a wooden floor. At very high loads, the use of the most resistant composition is assumed. Based on this, it is recommended to use waterless polyurethane varnish in the kitchen, hallway or living room. It will be well absorbed into the coating and will not require any special care.

Small rooms (closets and other utility rooms, small offices and bedrooms) can be treated with an inexpensive water-based product. Prices for such formulations start at $1.8 per liter.

Many varnishes simultaneously impart different shades to wood

• Hue. If you are completely satisfied with the color of the pine board, there is no point in using a tint composition. It is enough to use a transparent varnish.
• Terms of Use. Low/high humidity and other nuances.
• Type of old coating. Certain types varnishes, when applied to each other, lose their performance properties and lose their aesthetics. For example, floorboards treated with different solutions often crack or become blistered. To avoid such a reaction, in the absence of information about the old coating, complete cleansing of the unknown finish is recommended.

In addition, you should pay attention to the characteristics of the mixture itself:

• Appearance;
• Technological properties;
• Presence or absence of shine;
• Product composition.

Which varnish to choose for a particular floor is a personal matter, but the following nuances should be taken into account:

• The viscosity of the composition directly affects the duration of its drying: the higher it is, the more time is needed.
• Color mixtures are used to harmoniously merge the coating with the already existing interior. To treat floors made of wear-resistant wood (for example, oak or pine), it is better to use a transparent composition, which will only highlight all the advantages of the material.
• The glossy composition will create an additional visual effect and the wood will shine regardless of the brightness level of the lighting.

Optimal options

Polyurethane and acrylic floor varnishes create a water-repellent film

Varnishes have a whole set beneficial properties, but, as a rule, one of them prevails over the others, so you should immediately prioritize. If moisture resistance comes first, you will have to choose between polyurethane and alkyd varnish (they are perfect for the bathroom), but for the hallway it is better to choose a composition that increases abrasion resistance. Which solution is best for a nursery or bedroom? If you take for main criterion environmentally friendly - definitely water-based varnish. He doesn't highlight harmful substances during operation.

Water-based compositions can be used in rooms where no more than 3 people will be present. Colored polyurethane varnishes look great in hallways and kitchens. They are quickly absorbed, protect well from dirt and high loads, do not require additional care. In offices and restaurants, water-repellent mixtures and oil impregnations are often used. They perfectly preserve the structure of wood for many years.

Characteristics of different types of varnish

In order not to get confused and choose the right varnish, you should first familiarize yourself with what the market has to offer us. Nowadays there are 5 types of varnish mixtures:

• Water;
• Acrylic;
• Primers;
• Polyurethane;
• Alkyd.

They have a certain set of advantages and disadvantages, which determine the scope of their application.

Water based varnish

The mixture does not emit unpleasant odors. Dries after a few hours, turning into a beautiful shiny finish

Represents perfect combination price-quality (average price $8 per liter). It absorbs well into the wooden floor and hardens quickly. Water-based varnish is considered the safest for use, because during the application process it emits a minimum of solvent vapors, since it contains only a small proportion of synthetic components. The solvent concentration ranges from 0 to 15%, depending on the manufacturer.

The mixture does not emit unpleasant odors. It dries after a few hours to a beautiful shiny finish. The process of solidification of the composition is slightly different from the usual:

• Water evaporates first;
• Afterwards, a solvent that, upon contact with air, destroys the binding elements.
• The solution gradually turns into a film and then hardens. A durable coating is formed that perfectly resists the effects of adverse environmental factors.

However, when choosing a water-based composition, you need to take into account that it also has a number of disadvantages. Among them is a high level of penetration into the structure wooden board. Thus, if you treat a pine floor with this varnish, even with small gaps between the tiles, you should be prepared for an unexpected result. The mixture is not highly viscous and will certainly penetrate into the coating, which will cause squeaks after the substance has hardened.

Important! Before applying water-based varnish, all cracks are sealed with putty. Then the wood is coated with a deep penetration primer.

Alkyd varnishes

To the disadvantages alkyd composition should be attributed to its long drying

The main component of alkyd compositions are resins, which are obtained from natural raw materials. They penetrate deeply into the wooden floor, reliably protecting it from damage and emphasizing the natural beauty of the wood. The environmentally friendly mixture perfectly withstands temperature changes and high humidity and, what is especially nice, it does not contribute to the appearance of squeaks. The price of the product is from $2.3 per liter.

The disadvantages of the alkyd composition include its long drying time. Moreover, if you do not monitor the thickness of the coating during processing, specific “wrinkles” may form on the surface.

Important! Service life varnish coating 3-4 years.

As an option, you can purchase Tikkurila urethane-alkyd varnish. It is available in 3 types of compositions: glossy, semi-matte and semi-gloss. There are about 30 shades in the range. The price of Tikkuril mixtures starts from $5 per liter and it is quite consistent with the quality.

Primer varnishes

Primer varnish is usually used to improve surface adhesion.

The best varnish for a wooden floor is definitely a primer. It favorably emphasizes the beauty of wood and perfectly evens out its shade. The composition protects the boards from ultraviolet radiation and moisture, increases their service life to several decades. The price of the product is from $1.9 per kg.

Important! Drying time varnished surface no more than 3 hours.

Primer varnish is usually used to improve surface adhesion. Before deciding to purchase it, you should definitely find out what composition the wood was previously treated with. Some mixtures, when interacting, spoil the appearance of the coating.

Polyurethane varnish

Pine boards are most often covered with polyurethane varnish. It is very elastic, strong and durable, and also has increased abrasion resistance. The composition effectively holds the floorboards together, turning them into a single structure. The material dries in 2-2.5 hours even with high level humidity. The main thing is to ventilate the room afterward. The main disadvantage of the polyurethane mixture is its high price (from $13 per liter).

Acrylic varnish

Acrylic composition can be selected for processing hardwood, pine belongs to soft species

When working with such varnish, you need to take into account that it consists mainly of synthetic resins and a number of inorganic solvents. It follows that when the composition hardens, it will emit an unpleasant and toxic odor. But there are also advantages - the mixture significantly increases the strength and practicality of wood. To do this, the boards are processed in several stages, applying layers at intervals of 4 days after drying.

Acrylic composition can be chosen for processing hard wood, while pine is a soft type. It is not recommended to treat it with “hard” varnish.

Conclusions

A pine floor can be painted with any varnish you like, except acrylic, for example, something from Tikkuril products. Typically, manufacturers indicate on the label the wood species for which each specific composition is suitable for processing, as well as the technological and operational features of the mixture.

Choosing a varnish for a pine floor is a very important procedure. This is due to the fact that the quality paint and varnish material Not only the appearance of the floor base depends, but also its service life. The unique composition of this coating allows you to reliably protect wood from many external factors: mechanical and chemical damage, mold, fungi, etc.

Today on construction market Wood varnishes are presented in a wide range. Both domestic and foreign companies are involved in their production. Therefore, it is quite difficult for the average user to choose the optimal composition. Let's take a look at what you should consider when purchasing a varnish for your pine floorboards.

Varnishes are widely used for processing various surfaces. It can be decorative wooden products, furniture, countertops, counters and much more. However, the most common area of ​​use is painting floorboards. The great popularity of paint and varnish coating is due not only to its excellent protective properties, but also to the fact that it allows you to emphasize the natural beauty of wood and give it an unforgettable appearance.

The main criteria for choosing a varnish for a floorboard are the operating conditions of the floor. In most compositions, one property significantly prevails over the others. Therefore, when purchasing, you need to decide what is more important for you - wear resistance or moisture resistance, etc. So, for the bathroom it is recommended to give preference to material based on alkyd or polyurethane, for the hallway the best option there will be a mixture with increased abrasion resistance. For a children's room and bedroom, the main condition is environmental safety, so water-based varnishes are suitable for treating the floor in these rooms, since they do not release harmful substances into the space during operation.

Also, do not ignore the type of old coating. The fact is that some types of varnishes, when layered on top of each other, lose their aesthetic and performance properties. For example, the surface of a floorboard treated different compositions may become blistered or cracked. To prevent this from happening, you should know what the floor was previously treated with, or clean the base of the old finish before painting.

Varnishes for floorboards

The following types of paints and varnishes can be used to finish plank floors:

• alkyd;
• acrylic;
• aquatic;
• primers;
• polyurethane.

The main component of alkyd varnishes used for oak or other types of wood are natural resins, due to which such compositions penetrate deeply into the structure of the material, reliably protecting it from various kinds damage. Alkyd varnishes are resistant to unstable temperature conditions And high humidity, so they are perfect for painting bathroom floors. Their main disadvantage is the long drying time. Therefore, in the room where they are held finishing work, you need to open all doors and windows. The service life of acrylic coating is no more than 4 years.

Acrylic varnishes consist of synthetic resins and inorganic solvents, so when they set they emit a specific odor. Pine floor boards covered with such material will be reliably protected from abrasion and other mechanical influences. To increase the strength of the base acrylic varnish It is recommended to apply in several layers.

Water-based paints and varnishes are absolutely safe for human body, so they have found their application in the processing of plank flooring in bedrooms and children's rooms. Another advantage of such mixtures is considered non-flammability, so they are allowed to be used even in premises for which special requirements in terms of fire safety.

Primer mixtures are usually used to improve the adhesion characteristics of the surface being treated. Before using such a varnish, you should find out whether it is compatible with the existing decorative coating. For example, water composition It cannot be applied to an oil floor and vice versa, as otherwise the floor will become covered with unsightly stains. The service life of a wooden floor finished with primer varnish is more than 10 years.

As for polyurethane products, their main advantage is wear resistance. Therefore, they are often used for varnishing floors in high-traffic areas.

Do-it-yourself varnishing of a plank floor

Before processing wooden base made from pine boards, some preparatory work needs to be done. First, all furniture and other interior items that will disturb you are removed from the room. Then the cracks and chips on the floor are filled with wood putty. After it has dried, the entire surface is carefully sanded, cleaned of dust and wiped with a damp cloth.

At the next stage, the prepared floor boards are treated with a primer mixture, which increases the adhesion of the paintwork, thereby improving it mechanical properties. After the primer has dried, you can proceed directly to varnishing.

The varnish is applied using a regular brush, roller or spray. There is also a professional tool that allows you to achieve more high-quality coating. Such devices include a metal spatula, squeegee and pouring machine. Start off painting work It is recommended from the wall opposite the door so as not to block your exit from the room.

When buying varnish for a plank floor, you need to take into account the conditions of its use. Only the right material will allow you to achieve a truly amazing result that will delight you for many years.