Reading time ≈ 3 minutes

Technoelast - weldable roofing material for arranging a flat roof, protecting building structures from negative impact water. It has high strength and elasticity: it retains flexibility at a temperature of minus 25 degrees, ductility at -40 degrees. Thanks to such properties and positive customer reviews, it is popular in different regions, but is widely used in northern regions, areas with high ground pressure.

basis of this material are fiberglass, fiberglass, polyester. They are coated with bitumen-polymer binder, coarse/fine sprinkles (red, green, gray colors) or polymer film.

Technical characteristics of technoelast

Specifications technoelast grades: EKP, TKP, EPP, HPP:

Main types of technoelast

According to the scope of technoelast and the type of protective level, the following modifications are distinguished:

• Technoelast EPP- polyester-based material with a high-strength protective film. It is very strong and has a stretchable lining level. Used for the base layer flexible roofing, its waterproofing, waterproofing of the floor, foundation, basement, utility rooms;
  • E - polyester
  • P - film
  • P - film
• Technoelast EKP- polyester base with coarse powder and a layer of polymer film. Due to its increased reliability, it is used for the upper level flat roof, roofs of a barn, garage;
  • E - polyester
  • K - baby
  • P - film
• Technoelast HPP- fiberglass base with a protective polymer layer. Used for waterproofing floors, basements, foundations, flat roofs, vapor barriers, garage roofs, utility rooms, pipe insulation;
  • X - canvas
  • P - film
  • P - film
• Technoelast TKP- the base is fiberglass with a polymer film and coarse-grained topping. Suitable for the top level of a flat roof, garage roof, cottage, barn.
  • T - fabric
  • K - baby
  • P - film

There are 2 groups according to purpose:

• Technoelast K- for arrangement of the upper level of the roof. For its production, shale topping is mainly used, which protects from solar ultraviolet radiation;
• Technoelast P- when installing the lower layer of the roof. Fine-grained powder protective film prevent material sticking.

Advantages

• durability - the material is designed to last 30 years;
• elasticity - retains plasticity under severe temperature fluctuations, can be lengthened, stretched, and can be fused onto building structures of various shapes;
• high quality - high-quality bitumens are used for production;
• reliability - successfully resists mechanical, air, and biological influences;
• Can be used on any surface;
• technoelast has good waterproofing, excellent sound absorption, and retains heat;
• environmental friendliness - does not provide harmful effects to nature, man;
• good adhesion - the artificial rubber in the composition provides strong adhesion to different surfaces;
• ease of installation and installation.

Modern market building materials offers many types of waterproofing, manufactured domestically and foreign manufacturers. Among them, the Russian corporation TechnoNIKOL, which produces roofing, hydro- and thermal insulation materials on a bitumen and polymer basis. One of the most popular types of products from this company is Technoelast - waterproofing, which became the basis for the development of a professional system for the protection of building structures, incl. buried in the ground, from the effects of both precipitation and groundwater.

The professional waterproofing system Technoelast, produced by the factories of the TechnoNIKOL corporation, includes large number materials that have different physical and mechanical properties, but in all cases create reliable and durable moisture-proof coatings for roofs, foundations, tunnels and other above-ground and buried building structures used in all climatic zones Russia.

One of the most common Premium class materials included in the system is Technoelast EPP waterproofing, designed to create a roofing carpet, protect foundations from the effects of groundwater and man-made water, as well as other building structures with increased requirements for the reliability of moisture protection. In the production of Technoelast EPP, non-woven polyester fiber is used (this is indicated by the letter E in the designation), onto which a bitumen-polymer binder is applied, containing a special thermoplastic and fillers. To prevent sticking when rolled into rolls, the material is protected by a polymer film applied on both sides - two letters P in the designation.

Technoelast EPP is produced in rolls 1.0 m wide and 10.0 m long, and the material thickness is 4.0 mm. Waterproofing retains its passport characteristics in the temperature range from -25 °C to +100 °C. Laying Technoelast EPP is done by melting its bottom layer using a propane torch and attaching it to the base, which makes it possible to obtain a protective layer, the entire surface of which is fixed to the base.

Laying built-up waterproofing is not a job for amateurs

Advantages of self-adhesive material Technoelast Barrier

One of the developments of the scientific and technical center of the TechnoNIKOL corporation is the self-adhesive bitumen-polymer roll waterproofing Technoelast Barrier, designed to protect building structures - foundations, walls, tunnels, etc. from the effects of precipitation, groundwater and technogenic waters in all climatic zones of Russia. Technoelast Barrier consists of rot-resistant reinforced polyester fiber with a double-sided polymer-bitumen binder with high adhesive ability.

As a means of preventing sticking, the material is protected on top by a polymer film of increased thickness, and on the bottom by soft anti-adhesive fiberglass fabric. Included roofing pie Technoelast Barrier can be used as a vapor barrier, since high viscosity and adhesiveness enable the material to maintain its passport characteristics when punctured in the event of mechanical fastening roofing carpet and insulation.

Technoelast Barrier is delivered to the construction site in rolls 20.0 m long and 1.0 m wide. The material can be used at temperatures from -25 °C to +85 °C. The waterproofing is glued to the base, and maximum adhesion is observed at a temperature of the base and material not lower than +15 ° C. In other cases, the lower surface of the material is heated using an industrial hair dryer.

Before applying waterproofing, the base must be thoroughly cleaned

Why builders choose Technoelast

The high demand for materials of the Technoelast waterproofing system is explained by their good technical characteristics, in particular:

• long service life of 25 - 30 years;
• limited resistance to impact aggressive environments, which significantly expands the scope of application of the material;
• bioresistant to bacteria, microorganisms, and rodents;
• heat resistance, due to which the material does not slide off heated horizontal, vertical and inclined bases;
• high flexibility and elasticity, due to which Technoelast waterproofing can be laid on pliable bases - corrugated steel sheets, board insulation; in addition, these properties allow the material to be laid on uneven bases;
• possibility of laying welded materials at negative temperatures;
• ease of installation of waterproofing;
• compatibility with other bitumen-based materials, which allows it to be used for repairing old roofing felt roofs.

Waterproofing produced by TechnoNIKOL corporation enterprises is divided into 4 classes, starting with the Economy class and ending with the Premium class, which allows you to select the material depending on the requirements for protective coatings.

Despite the automation, you can’t do without supervision

The use of modern weld-on and self-adhesive waterproofing materials can significantly increase the service life between repairs protective coatings, increase labor productivity, reduce the influence of the human factor on the quality of work performed. The reliability and durability of waterproofing directly affect the amount of operating costs required to maintain the entire building, so the increased one-time costs required to purchase modern high-quality material will pay off fairly quickly.

Technoelast, like most built-up roofing materials, consists of:

• base (fiberglass, fiberglass or polyester) - ensures durability roofing;
• SBS-modified bitumen binder, increasing performance characteristics material;
• polymer film with the manufacturer’s logo on the bottom side, protecting the canvas from mechanical damage, gluing of turns to each other, and also serving as an indicator of sufficient heating when fusing the material;
• polymer film on the top side (in the case of lower layers of material) or slate topping gray, designed to protect bitumen binder from ultraviolet radiation and mechanical damage during operation.

Technoelast differs from other materials for soft roofs in more sophisticated technology production and quality of materials used. Artificial rubber added to bitumen provides elasticity when low temperatures and heat resistance at elevated temperatures. The reinforced base is not subject to rotting and retains its strength characteristics throughout its service life.

The relatively high price of Technoelast waterproofing is compensated by improved technical parameters:

Characteristic	Unit change	Technoelast	Economy class waterproofing
Heat resistance
Flexibility temperature
Breaking force no more
Service life

Technoelast is marked with three letters, which mean:

• first - base type: E - polyester, X - fiberglass, T - fiberglass;
• the second is the type of coating of the upper surface: P - polymer film, K - coarse-grained slate coating;
• third - coating material with inside: P - polyethylene film.

Application

Technoelast is intended for waterproofing:

• roofs;
• interfloor ceilings;
• foundations;
• basement walls;
• underground tanks;
• swimming pools;
• main pipelines;
• others construction structures and designs.

To construct the lower layers of the roofing pie, Technoelast is used, both sides of which are covered with film; for the upper layers, a material with a film on the bottom and slate chips on top is used.

Technoelast has the following advantages:

• absolute waterproofness;
• high tensile strength - Technoelast based on polyester and fiberglass is 15% stronger than similar budget materials;
• durability - the synthetic base is not subject to rotting, bitumen is not afraid of chemical exposure active substances, mineral chips reliably protect Technoelast from ultraviolet radiation;
• possibility of operation in any climatic zones - Technoelast can withstand temperatures up to +100 o C;
• simple installation technology, the ability to perform work in winter;
• affordable price - Technoelast is cheaper than most roofing materials.

It is beneficial to use Technoelast. Budget roll materials last up to five times less than Technoelast, their price per m 2 is only 2 times less.

Technoelast from Ant-Snab company

If you decide to buy Technoelast in Moscow from the Ant-Snab company, the price will pleasantly surprise you. We work without intermediaries, we receive Technoelast directly from TechnoNIKOL factories. Discounts are provided for large quantities purchased. Payment can be made in cash or by bank transfer.

To buy Technoelast from Ant-Snab, you should:

• choose a brand of roofing covering that meets the conditions of use;
• calculate the need for materials using the online calculator available on the website;
• fill out the order form;
• agree on terms of payment and delivery;
• If you have any questions, call our consultants.

Delivery by company transport is carried out within 1-3 days after placing an order within the Moscow region. By prior arrangement, it is possible to unload goods and lift them to the floor. To remove roofing materials yourself, you must agree on a shipment date and payment method. Come. Call. We are waiting for your orders.

"Premium" class produced by TechnoNikol. Characterized by an increased degree of reliability.

Intended for the installation of a lining or top layer in the roofing carpet of buildings, waterproofing engineering structures, foundations, tunnels, ventilation shafts, swimming pools. Can be used in all climatic regions in accordance with SNiP 23-01-99 and on objects of any complexity.

Technological features

Fused bitumen-polymer waterproofing Technoelast TechnoNikol is a rolled sheet, on the base of which a bitumen composition with mineral additives is applied on both sides - talc, dolomite, modified with SBS polymer (artificial rubber styrene-butadiene-styrene).

The top and bottom of the surface is covered with protective polymer films or granular shale chips. Polyester (polyester), fiberglass or fiberglass is used as a base.

Performance characteristics

The SBS polymer included in the composition gives the material elasticity and high temperature characteristics - frost resistance and heat resistance.

The flexibility of the canvas is maintained at temperatures down to -25°C, which allows you to work with it in winter.

The laid material does not lose its plasticity at temperatures down to -35°C, thereby eliminating fragility and violation of the tightness of the surface and joints. Technoelast

Heat resistance up to 100°C ensures the stability of the coating, preventing slipping due to solar overheating in hot climates.

Main advantages

• does not crack under deformations and loads in a wide temperature range, providing absolute waterproofness;
• steam resistant;
• not susceptible to the action of fungi and microorganisms;
• durable, service life is 25 - 30 years.

Technoelast is produced in several modifications - EKP, TKP, EPP, HPP, the characteristics and structure of which are somewhat different from each other. The structural features determine the purpose of the materials.

Technoelast EKP

Used as top layer“soft roof” in two-layer coverings. Ideally combined with Technoelast EPP type as underlay roofing waterproofing. When repairing old roofs, laying one layer is sufficient.

The basis of this material is reliable, elastic polyester - index E in the designation. It has high tensile strength and is not subject to rotting. The upper side is covered with a layer of coarse-grained slate chips in gray or green colors (index K). The bottom side is made of low-melting polymer film (index P).

Specifications

Scope of application

Intended for roofs that experience deformation and have a slope. Slate chips protect the surface from harmful ultraviolet radiation. Due to its sufficient thickness, it can easily withstand loads and human movement on the roof.

Technoelast EPP

It is a lining layer in roofing carpet and a waterproofing coating for utility buildings and building structures.

Made from elastic, durable polyester (E). The top and bottom layers are protected by a fusible film that prevents sticking during storage (PP).

Specifications

Scope of application

It has successfully proven itself on dynamic flexible surfaces and roofs experiencing deformation loads as a lining material. Paired with Technoelast, EKP will create an impeccable roofing installation.

Excellent for external and internal waterproofing various designs: tunnels, bridge spans, underground structures, boiler houses, swimming pools, .

Technoelast TKP

Heavy-duty material used as the top layer of “soft roofing” roofing carpet. It has excellent technical characteristics in terms of strength and resistance to mechanical loads, but low elasticity. It is recommended to use on roofs without a slope that do not experience various kinds deformations.

The reinforcing base is a tensile, but low tensile, frame fiberglass fabric (T). External side bitumen-polymer composition is protected by a coating of shale chips (K), the inner one is covered with a polymer film (P).

Specifications

Scope of application

A very durable coating designed for flat or slightly sloped roofs of civil and civil buildings. industrial use. Excellently copes with intense surface loads, maintaining absolute waterproofness for a long service life.

When installing a new roof, it is combined with Technoelast HPP or other underlay waterproofing. It is enough to repair the old coating in one layer.

Technoelast HPP

It is a roofing lining and waterproofing fabric. Is budget option from the Technoelast premium product series.

In the middle lies fiberglass, which has low strength and elasticity (X), treated with a polymer-bitumen mass. Both sides are covered with fusible film (PP), which prevents sticking during transportation.

Specifications

Scope of application

Intended for unloaded flat or slightly sloped roofs, where it serves as the bottom layer of the roofing carpet. Can be used together with Technoelast TKP. Reliably performs the waterproofing function of basements, boiler rooms, bathrooms, swimming pools, pipes.

Information to note : , .

Technoelast from Technonikol is a domestically produced waterproofing and roofing material that is affordable, easy to install and resistant to the most severe operating conditions. Today it is one of the most technologically advanced, not only in Russia, but also in the world as a whole, being widely used where others are unsuitable.

As for the prices, m2 of EPP technoelast, while they remain average, which makes it in demand when constructing the most different buildings and structures, regardless of their purpose and technical characteristics. This is no less due to the simplicity of its design, which includes:

Base made of polyester, fiberglass or fiberglass;

Waterproofing layers made of bitumen-polymer composite;

Protective layers of polymer film and/or coarse slate coating.

Before you buy Technoelast, decide on its brand

from TechnoNIKOL also stands out for its variety of brands, which are divided into two categories:

Universal (intended for use in standard conditions);

Special (used in special conditions or different special properties).

Below we will look standard varieties of this material, of which four types are commercially produced:

Technoelast EPP - the base of the material is represented by a sheet of polyester, as protective layers polymer film is used (for the top layer without a logo, for the bottom - with it), thickness 4.0 mm, weight 4.95 kg;

Technoelast XPP - the basis of the material is fiberglass, the protective layers are again sheets of polymer film (the top one without a logo, the bottom one with it), thickness 3.0 mm, weight 3.90 kg;

Technoelast is a material with a polyester base, its upper (front) protective layer is formed by coarse-grained slate coating, the lower one is formed by a polymer film, thickness 4.2 mm, weight 5.2 kg;

Technoelast TKP is a material based on fiberglass, coarse-grained slate coating is used to protect its upper side, and a polymer film with a logo is used on the lower side, thickness 4.2 mm, weight 5.2 kg.

Technoelast EPP is a leader among leaders

Among the above waterproofing materials from TechnoNIKOL, Technoelast stands out in many ways, but most of all, of course, in price. Technoelast EPP, as mentioned above, is made on the basis of polyester, also sometimes called polyester, which today is cheaper than fiberglass, and even more so fiberglass.

The low price of Technoelast EPP, it should be noted, does not prevent it from having not only excellent tensile strength, but also quite good elongation, which is especially appreciated when installing roofing carpet in critical areas flat roofs. For comparison: the elongation of fiberglass and fiberglass is only 1.5%, while for polyester this figure reaches 30!

Photo by Technoelast:

For waterproofing needs, Technoelast is no less good. Waterproofing, by the way, can be carried out by him in relation to any building structures - foundations, walls, floors, and roofs - as well as pipeline communications aboveground and underground laying. Including transmitting heated media, because the heat resistance of this material reaches 100 C.

Roofing carpet made of Technoelast TechnoNIKOL

Are you planning to buy Technoelast for installing a soft roof? Then you should know that the latter can be mounted from this waterproofing material only two-layer and no other. Its lower (lining) layer is made of material with the EPP index; for the upper (cover) layer, ECP is used. Attention: the layers are laid perpendicular to each other.

The price of Technoelast EKP is higher (this is due to the presence of a protective layer of coarse shale topping) than that of EPP, although not by much. As for the installation technology, in this regard they are the same, although with lining layers There are always more problems, because they are mounted directly on the base, which is rarely ideal.

Electronic store website: always affordable prices

Moreover, absolutely for any Technoelast - for HPP, for TKP, for EKP, for EPP, as well as for a number of special varieties of this waterproofing material. Regardless of what kind of Technoelast you need now, its price per m2 will probably not upset you and will not seem excessive or overpriced. Do you think this doesn’t happen nowadays?

In the electronic store GidroiSOL.ru this is the norm, which, importantly, applies not only to Technoelast alone. Prices of propane burners used for fusing it, and bitumen mastic, which is irreplaceable if roll waterproofing you prefer not to fuse, but to glue, we calculate according to the same schemes!