Good day! Every person in life is faced with the question of choosing a high-quality plastic window. If you are faced with such a problem, I suggest reading this article.

My many years of experience in working with plastic windows gave me a lot of knowledge, which I will gladly share with you.

The plastic window is made of a multi-chamber system, which not only retains heat, but also protects the house from moisture, dust, wind and noise. For the selection of quality windows, the manufacturer plays an important role in the first place. It is better to choose a window manufacturer based on customer reviews, friends who have installed windows. The most popular manufacturers: Rehau, KBE, Veka, Salamander, Proplex.

An important role is played by the material from which the profile, glass unit and fittings are made.

Feedback and advice from our clients on how to choose the best and highest quality plastic windows

If you decide to install windows, then you first need to decide which plastic windows select. It is important to know what to pay special attention to in order to avoid many problems. We provide below reviews of plastic windows that are left by our customers. Perhaps they will help you understand the question - how to choose plastic windows.

Anatoly, 45 years old, Moscow:

Pay attention to the type of profile used. The profile can be imported or domestic. Many experts argue that imported ones are of better quality - and this is so. Sometimes, in order to make an inexpensive profile, they use secondary raw materials. Therefore, be sure to check this point with consultants. Carefully study the cut that you are shown as an example - its thickness should be 1.5 mm, it should be made of galvanized steel. Only such a profile will be reliable and of high quality.

Try to carefully consider the supplied accessories. High-quality fittings are made in Germany. The simplicity and convenience of managing your plastic window depends on it.

The number of air chambers inside the window must be at least three.

A company that manufactures plastic windows must have samples of work and profile cuts. Production and installation must be certified. Never hesitate to ask for supporting documents and samples. This will later save you from many worries.

The correct plastic windows will serve you reliably. I would like to note that only professionals work in the company "Repair" of windows. You can trust them with your home without a doubt! "

Stanislav, 37 years old, Moscow region:

“… I would like to advise all those who wish to purchase the best plastic windows to pay attention to the quality of double-glazed windows.
A high-quality glass unit should be:
Not less than 32 mm thick;
There should be at least two air chambers in a glass unit;
Must have a heat-reflecting coating;
Glass grade must be M1-polished;
When I needed to change the window in the kitchen in my apartment, I turned to the Window Repair company. The double-glazed windows turned out to be of really high quality - they are not afraid of any wind and frost. Guys, thanks! "

Svetlana, 30 years old, Moscow:

“… Plastic windows - which ones are better? In my opinion, brands such as Rehau, Veka, KBE should be trusted. Plastic windows are really high quality - reliable thermal insulation, ease of operation, burglar-proof system. The windows look solid, there is no noise from the street. I installed plastic in my apartment Rehau windows, and the parents have Veka. With such windows, cold winters are not terrible, and in summer it is quite comfortable with the help of mosquito nets. Thanks to the staff of the Window Repair company for their advice and assistance in installation! "

Contact our company and purchase high-quality plastic windows for yourself, which will help you look at the world around you in a new way!

source: http://www.okna-plastiq.ru/

Choosing which windows to buy for your home or office, each of you is looking for the best solution to preserve warmth and comfort, trying to find the best combination of price and quality. The manufacturer of high-quality plastic profiles recommends paying attention to the following parameters of a PVC window:

Profile

There are several grades of profile quality, determined by the thickness of the outer wall. A thinner profile can be cheaper, but it cannot always ensure the preservation of the consumer properties of the window - heat and sound insulation, geometric stability, durability. The best companies work with a class A profile, which guarantees quality.

Fittings and components

Good quality windows should open and close without problems at any time of the year, protect from dust and street sounds. Cheap seals, handles, rotary fittings and fasteners not only reduce the cost of the window, but also reduce its quality. Indeed, with bad components, even a first-class profile will not save you.

Glass

Pay attention to which glass the manufacturer uses. Good windows have polished glass double-glazed windows, often with sunscreen coating. Cheap Chinese glass can later upset you with cloudy stains, scratches and even cracks in severe frosts.

Mounting

Whatever the best PVC windows are, improper installation will ruin it all. We advise you to use the window installation services offered by the manufacturers themselves. Involvement of outside people in the installation or self-assembly will void your right to warranty service.

Price

The final cost of the window with installation depends on all the previous points. It is possible to find and supply a window at a lower cost, but the cumulative savings can be as high as 20% and the lifespan of the window will be unpredictable. Just find out how much maintenance and repair costs, and consider whether it is worth installing windows that may need to be repaired.

From the experience of cooperation with window manufacturers, we confirm that the most common problems in window operation are caused by poor-quality fittings and improper installation. Better to spend a little more money, and set the window the highest quality than to regret the money spent and again prepare for the repair.

source: http://www.veka.ru/

The rating of plastic windows is one of those criteria by which it would be quite easy to determine the best plastic windows. However, you will not find such an objective and comprehensive rating. There are several reasons for this.

Firstly, the rating of plastic windows cannot be objective, since the assessment will always be based on subjective judgment. Expert or popular opinion is always only the opinion of the subjects based on some criteria, the set of which is very different.

Secondly, the rating of windows cannot provide a comprehensive assessment, because window products are a technically complex product with versatile and multifaceted characteristics. It is not at all necessary that the best window should be made of the thickest (widest) profile and the warmest glass unit is not always necessary for glazing.

Thirdly, the rating of brands of plastic windows cannot guarantee the quality of PVC windows in use. Even the best rating windows can be damaged by poor quality installation or perform their functions improperly due to manufacturing defects.

Which plastic windows are better: Veka, Rehau, KBE?

As in any question: a fish is looking for where it is deeper, and a man, where it is better. In this regard, it is always more interesting for an ordinary consumer to buy a better quality product for favorable price... Therefore, having an idea of ​​which product from the presented line has best performance- it is always easier to find it at the best price.

Choosing windows popular today on the basis of Rehau, Veka, KBE, etc. profiles, a person makes a conscious choice in favor of a well-known and reliable brand. However, windows based on the best technical profile have excellent potential, but do not guarantee excellent performance.

Indeed, in addition to the profile itself, the window contains fittings, a double-glazed window, the quality of work of the window manufacturer and the installers of the installer. Thus, a window from the Rehau brand profile will not necessarily be better than KBE or Veka windows.

Why is there still no better window company and better plastic window?

This question torments both buyers and sellers of windows, journalists of popular magazines and editors. Increasingly, a question is asked about the choice of the best PVC windows on construction forums and in search engines... But the answer, unequivocally fair and correct, has not been found. Why?

One of the reasons is the complexity of the design itself, as we described earlier, which is big number elements. Both expensive and high quality components and less expensive, less reliable components can be used here.

Add to this the human factor, which is present in any assembly and manufacturing process using the labor of a living person. You will get a black box with a large number of unknowns at the entrance and a product with mysterious properties at the exit.

Another component that also takes place in determining quality installed window Is the installation process. It is not difficult to imagine a situation when a perfectly made window in everything will be irretrievably damaged by an inept installer.

Note!

It was complaints about such an attitude that we heard in the process of “sanitation” of residential buildings. Installation of plastic windows was entrusted to non-professionals, and as a result, initially good-quality windows turned into a non-functional and low-quality element of a window opening in the end.

If, nevertheless, to define best window, then for this you need to compare and select products according to following rules or in one of the following ways: by price, by quality, by an optimal price-quality ratio.

The method of independent rating of plastic windows, giving an interesting assessment to the buyer, as it seems, should be based on absolute values ​​related directly to the window structure. The quality of services (delivery, installation) can be assessed in relation not to a window, but to a specific window company.

Summary:

• The rating should include products - plastic windows and PVC doors - of the same "weight" category. Having similar, if not the same, technical characteristics. Windows of different segments should be compared in their subgroups.
• The rating should evaluate the same parameters according to a previously agreed list - the most significant characteristics from the point of view of the consumer of windows.
• The rating should be compiled by an independent group of experts or formed by public opinion - a representative sample from the aggregate of all possible window consumers.

Only by working in this way, the results obtained will make at least some sense, and the rating of plastic windows itself will be in demand, useful and relevant when choosing windows and buying them.

source: http://pvc-profile.ru/

What are the best plastic windows to install?

At first glance, the design of plastic windows is very simple - glass, frame, handles. However windows different manufacturers differ from each other both in quality and in price. Choosing windows of a well-known brand, the buyer pays not for a big name, but for reliability and durability. Let's take a closer look at all the elements that make up the windows, and find out which plastic windows are better.

What plastic windows are best for an apartment or house? Good plastic windows don't just cover a window opening - they serve many functions.

The main one in our latitudes, of course, is heat conservation. Owners of low-quality windows are well aware of the problem they can become in winter. Cold and drafts are inevitable for those who decided to save money and supply the cheapest handicraft model.

But the best plastic windows provide perfect thermal insulation - for example, when it is -5 o C outside, the temperature near the inner glass never drops below +20 o C. In summer, windows can protect an apartment from heat and too bright sun - for rooms facing south, you can choose windows with tinted glass units and protection against infrared radiation.

An important function of plastic windows is sound insulation, this is especially true for those who live near a busy road. Sound insulation depends on the thickness of the glass and the distance between them.
Windows also protect the house from illegal entry.

Helpful advice!

Well-known manufacturers are constantly improving the burglary resistance of windows, and many models are not easy to open from the outside. And, of course, do not forget about such trifles as protection from insects with a mosquito net and from light with blinds.

There are many firms producing plastic windows - about 10-15 largest manufacturers (KBE, Rehau, Veka, Salamander, Schuko, Kommerling, Proplex, Deceuninck, Montblanc, LG Chem and others) and several dozen smaller ones. Each company offers a number of lines of windows - from affordable prices to luxury options.

It is not easy to understand such a number of proposals, it is even more difficult to say which companies of plastic windows are better. When choosing a window, one should start not from the brand or, moreover, the price, but from your own needs. Here's what to look for when choosing a window:

Material and profile uniformity

Usually, a profile for plastic windows is made of PVC, reinforced with metal. PVC is resistant to deformation, harmless to humans and the environment, not afraid of temperature changes, moisture, oils, acids and solvents. PVC can be used to make not only standard square and rectangular windows, but also structures of any shape - round and semicircular, triangular, etc.

High-quality PVC of uniform color, its surface is smooth, without grains, irregularities and streaks, it is absolutely odorless.

Profile thickness

The profile is a structure with internal partitions. The thickness of the outer and inner walls of the profile is normalized. Depending on it, the profile is assigned to one of three classes - A, B or C.

1. Class A - outer walls from 2.8 mm thick, inner walls from 2.5 mm. Windows from such a profile provide good heat and noise insulation, they are installed in residential premises.
2. Class B - outer walls from 2.5 mm thick, inner walls from 2.0 mm. Class B profile windows are recommended for installation in non-residential premises. They are less durable, retain heat worse, and do not provide adequate noise protection.
3. Class C - all other profiles that do not meet standards A and B. There are no strict requirements for a class C profile.

Obviously, the thicker the profile, the stronger and better it is. Most modern window profiles have an outer wall thickness of 3 mm or more.

Number of air chambers

There are several cavities inside the profile - air chambers that provide protection from cold and loud sounds from the street. The minimum number of cameras in a profile is 3, the maximum is 8. The most common 3- and 5-camera profiles. 3-chamber is suitable for windows facing a quiet courtyard or to the south, 5-chamber is better to choose for windows facing the road or oriented to the north.

A glass unit is called a block of glass, hermetically connected to each other. The space between the two sheets of glass is the chamber. Many people confuse cameras in a profile and cameras in a double-glazed unit, but these are different concepts.

The most common double-glazed unit is a two-chamber one, consisting of three glasses and two chambers between them. However, there are also three- and four-chamber double-glazed windows for particularly cold climates. Single-chamber packages are only suitable for glazing loggias, balconies or gazebos.

The quality of the glass is no less important than the number of chambers in a glass unit. Regular glass is the cheapest, but today many people choose glasses with additional properties. For example, glass with a coating that reflects infrared rays - it is as transparent as ordinary glass, but at the same time it keeps warm in winter and pleasantly cool in summer.

Note!

There are fireproof glasses that do not break even when exposed to extreme high temperatures, and glass laminated with triplex - such a window is almost impossible to break, but even if someone succeeds, there will be no sharp fragments when broken.

Quality of seals

Seals are needed so that the window closes tightly, as well as to ensure the tightness of the glass units. Seals are made from rubber, rubber-plastic, silicone or natural rubber. The most inexpensive (and short-lived) option is rubber; more expensive seals are installed in windows made of rubber and silicone. They do not deform even after long-term use, temperature drops also do not affect their quality.

Profile width

The profile width must be at least 50 mm. Most of the best PVC windows are 58-70 mm wide or more. The thickness mainly depends on the number of glasses - the more there are, the "warmer" and wider the window. In most cases, the width of 58-70 mm is sufficient to provide warmth and silence in the house, wider profiles are in demand in a harsh northern climate or in very noisy areas.

Fittings

A plastic window is a rather heavy structure, moreover, it is constantly exposed to stress - windows are opened and closed every day. Therefore, the fittings for such windows must be especially reliable. Most often, the owners of cheap low-quality windows complain about the fittings - the handles get loose and fail, or even fall off altogether, window hinges seize and warp.

To avoid such troubles, buy windows from reputable manufacturers who not only strictly control the quality of fittings, but also constantly develop new, more convenient and durable systems. Adjustable fittings are better than unregulated ones - they allow you to open the window just as much as required, and special stoppers will not allow a draft to close the window.

Burglar-proof systems will prevent intruders from entering the house (this is especially true for apartments on the ground floor, summer cottages and private houses). Worthy manufacturers of window fittings include Roto, Aubi, Winkhaus, Siegenia.

The best manufacturers of plastic windows and prices

Manufacturer	Dignity	disadvantages	Cost (for a double-glazed window 1400x1600 mm)
	Durability, high levels of heat and sound insulation, environmentally friendly plastic. KBE windows are hermetically sealed, withstand temperature drops from +50 o C to -50 o C. A well-thought-out ventilation system that does not allow the windows to fog up.	Relatively high price. The plastic may turn slightly yellow over time.	From 13,000 rubles
	Durability, good sound and heat insulation, a wide range of models, environmental safety, frost resistance.	Low sash height and somewhat higher cost in comparison with other brands.	From 13 500 rubles
	Low cost, durability, adaptability to Russian conditions, plastic, which is durable and whiteness.	The design of some models is morally outdated. No international certification.	From 11,000 rubles
	Durability, high noise and heat insulation, tightness, a wide range of models. Rubber sealant that is not afraid of low temperatures.	Relatively high price.	From 12 500 rubles
	Low cost, very good design, adaptation to Russian conditions, a wide range of models, durability, full control over the production cycle.	Lack of a certificate for the quality management system, weak fittings, an unpleasant chemical smell from the seal.	From 10,000 rubles
	High quality, good thermal and noise insulation characteristics, laconic design, high-quality glossy plastic, good value for money.	More common in the Far East than in the central part of Russia. Consumer properties of a window from of this profile not fully studied, due to the relatively recent introduction to the market of the central part of Russia.	From 12,000 rubles
	Very rigid construction, resistant to deformation, good design, reliability, good tightness, a wide range of models.	Heavy profile, not very suitable for doors, built-in blinds that break after a few years.	From 12,000 rubles

As you can see from this table, the products of each company have their pros and cons, so the choice depends on your preferences. Better yet, seek advice from the specialists of the company that installs plastic windows - they are aware of all the weak and strengths each brand and the intricacies of operation.

Selection of firms and companies of plastic windows, rating in Moscow.

If you are going to change windows in your house or apartment, you will certainly have to decide for yourself the question of choosing the right company of plastic windows, which would not only sell you a quality product, but also correctly install it, and also carry out its subsequent maintenance. And given the fact that there are more manufacturing companies producing and installing plastic in the capital today than mushrooms after rain, the task may seem overwhelming to you. By contacting a bad driver, you risk not getting the level of comfort that you dreamed of, hoping to replace the old ones. wooden structures on new PVC windows.

Affordable offer

As we have already found out, the companies of plastic windows in the capital are represented in a wide range. All of them, according to advertisements, are engaged in the manufacture of the best plastic window blocks, and also guarantee free and quality installation, finishing, post-warranty service, etc. Moreover, companies for the production of PVC profiles are trying to "outperform" each other in the matter of the offered prices, often offering customers goods at a bargain price. Needless to say, these proposals do not inspire much confidence. Next, we will consider what you should pay special attention to when choosing a company for the production of window blocks.

What should you pay attention to?

1. Price. The cost of goods for many customers is a determining issue. However, plastic windows (Moscow, St. Petersburg, no difference) simply cannot be cheap. Therefore, the lower the price, the higher your alertness should be. Promotions, discounts, phrases like "buy cheap" or "order cheap" - all this, as they say, "from the evil one." Well, as you understand, the products will be in in this case definitely not worth buying.

2. Ready windows for typical openings. Many companies selling plastic products try to attract the attention of buyers by offering ready-made structures that are brought to the site immediately after ordering. Here it is worth remembering that each window opening is individual, even in panel house... And if you deviate from the specified dimensions by a couple of centimeters, then the installation may go poorly. In the worst case, the window will not fit into the opening at all. Therefore, the condition of ordering an individual window must be observed without fail.

3. Profile. In addition to glass (double-glazed windows), the window also consists of a profile. It is the quality of this very profile that will determine the quality of the entire window structure. The cheaper the profile, the lower its quality, and, as a result, the durability of the window block. When ordering a profile for western-made windows, you will receive a window that will last for several decades.

4. Reputation. In addition to high-flown words, the company must have experience in ordering and working with clients. If a company exists on the pvc profile market without a year for a week, then there is no trust in it and cannot be. Pay special attention to the reviews on the forums, because the voice of the people can contain very valuable information. Check the companies that manufacture window blocks in full, including names, addresses, phone numbers, the availability of a high-quality catalog, a calculator on the site, the possibility of turnkey installation and purchase on credit.

5. Warranties for installation. If a company provides a guarantee both for the product itself and for its high-quality installation, then this speaks in its favor. The main thing is that there should be no small print in the contract with the guarantee. Anyway. The contract is read cover to cover before it is signed.

6. Own production. It is very good if the company is not a distributor, but a direct manufacturer of plastic products. Check if the company has its own factory, or if it works with one or another manufacturer. It is possible that the manufacturer is also engaged in such additional activities as the manufacture of blinds and the repair of window blocks that are out of order for any reason.

1. Buyer's choice. We look at what products a Moscow buyer most often risks choosing, who, as a rule, focuses on the cost of products and accessories, as well as on the availability of window blocks for an ordinary consumer.

2. Brand awareness. Say what you like, but the brand has its own weight in the choice of plastic products. The more money is invested in advertising, the more famous the company is and the less liberties it can afford in terms of working with a client. Because a disgruntled customer can greatly affect a reputation that money can hardly buy.

3. The quality of goods and services. Even the highest quality window will be hopelessly damaged if it is installed by amateurs. The converse is also true. A bad window block will not be able to provide the desired level of comfort, no matter how well it is installed.

So, based on these parameters of the rating, we rightly give the first places in the list to such companies as Kaleva, Okna Rosta, Moskovskie Okna, Svetlo VV, Attik, White Windows.

If we talk about the rating of the window structures themselves, then it is rather difficult to compile it, since the quality and characteristics of the window are largely determined by its configuration. Therefore, we will make a small rating of window profiles, in which the German brands KBE, REHAU and VEKA have long been leaders.

• 

  Methods for fixing plastic windows, how to fix it yourself with your own hands?

• 

  We calculate the consumption of cement per 1 cubic meter (1 m3) of concrete.

• 

  Metallic or metallized wallpaper for walls, advantages.

• 

  Modern technologies and profile history Veka windows(century, eyelid).

The popularity of plastic windows depends on many factors, first of all, they help to save energy resources. And they also create good soundproofing of the room, well, they are quite practical in design. But the installation of such windows requires a responsible approach, therefore, in such a case, you need to contact only trusted companies that provide guarantees for their work. And to choose according to such a criterion as the best company for the installation of plastic windows in Moscow, the following rating of window companies in Moscow in 2017 will help you.

What is the best company for the installation of plastic windows in Moscow

In a city with a population of over one million, like Moscow, there are many such organizations. But our rating is made up of the most trusted firms.

10th place. Stroymaster firm. It has 3 points of sale in Moscow itself, 3 - in the Moscow region. All services are highlighted on the website with a user-friendly interface. It lists all the services that are provided and the price list of price positions.

9th place. "Build windows". The company preferably works with the brands KBF and Rehau. Detailed information can be found on their own website, which discloses all the details of the service.

“Windows of Growth” takes the eighth line. Supports the products of the manufacturers Provedal, Veka, Eurobrus. It has seven points of sale in its state in Moscow.

7th place. Organization "German Windows". According to consumer reviews, this organization should occupy a leading position as best firm for the installation of plastic windows in Moscow. But she won only the seventh position for the reason that there is only one warehouse-office of this company in the city.

6th line belongs to the company "Mobillon Windows". Delivers products of the brands Agrisovgaz, KBF, Novoteks, Provedal, Eurobus. There are up to 12 offices in the city. User reviews are favorable.

5 leaders open the Window Continent, which in its working arsenal includes the following brands: Bowline, KBF, Newtech, Novotex and Provedal. twelve years on the market, has won many positive customer reviews.

The fourth place in such an issue as the rating of companies for the installation of plastic windows in Moscow in 2017 is assigned to the organization "Comfort Windows". The only company that was awarded the Rospotrebnadzor Prize. Has been working for its clients for seventeen years.

In the top three (position 3) is the "Window Factory". The organization works with a very understandable website where people can find all the information they need. Preferred models which the organization puts in are Rehau and KBF.

Second place - "Euro windows". With the exception of the quality of the work performed, he constantly invents various kinds of promotions or discounts for his clients.

The championship goes to a firm whose quality of work is not questioned - Kaleva. A multiple winner of the National Company of the Year award, he has six points of sale in the city. "Starozhil" in the market of such services - for nineteen years the company has been engaged in the window business.

As a result, it should be noted that from the above list, you can choose a company that is really on high level to complete this kind of task, and such an organization will truly be the best window installation company in Moscow.

When old wooden structures are loose, covered with a thick layer of cracked paint, they are unable to retain heat and seal. Naturally, the question arises: "What windows are better to put in an apartment?" Plastic! The answer can only be that. However, with the current range of such products on the Russian market, it is rather difficult to make a choice. Therefore, today we will conduct a small review of manufacturers of such structures to make it easier for you to navigate this variety.

The undisputed leader in the modern Russian market is plastic windows. The advantage of these systems is primarily due to their excellent performance characteristics, long service life and effective decorative data.

Plastic windows: advantages

If you are interested in the answer to the question: "What plastic windows are better to put in an apartment?", You need to know about the advantages of these products. Today they are gaining more and more popularity in construction market... How did they deserve such recognition?

Of course, the strength of the structure. Glass may fall out of an ordinary window in a strong wind, and in plastic glass unit it is securely fastened. Moreover, such products are shockproof.

The aesthetics of these structures cannot be ignored. They are very beautiful, the house with plastic windows seems to glow from the outside, and the rooms become much brighter.

The indisputable advantages of plastic include its lightness and the ability to create a double-glazed window of any shape. For each architectural style you can choose a suitable option.

The affordability of these products is equally important. Today manufacturers from different countries offer not only elite, exclusive types of their products, but also budget options.

Plastic profile

The main component metal-plastic windows- PVC profile. It is made from polyvinyl chloride. Initially, it is a powdery material made from products with the addition of table salt. In addition, various modifiers and stabilizers are added to this powder, which give the material strength and resistance to aggressive mechanical and natural stress.

Which company is better to install plastic windows

Today, many companies are engaged in the production of these structures, both in our country and abroad. Their choice in our time is greater than ever. Moreover, these are not only respected, time-tested brands, but also very young companies that have yet to prove their worth and withstand very tough competition. Today we will try to present them to you so that you can answer the question: "Which company is better to install plastic windows?"

REHAU windows

The German company Rehau has been confidently leading in our market of plastic structures for many years. It was established in 1948 and currently employs over 15,000 people. The first representative office in our country appeared in 1995. In 2002 it was opened own production on Russian territory.

The company presents six window profiles. They differ in a variety of characteristics and prices - from budget to luxury. The number of chambers ranges from 3 to 6. There are samples created specifically for the conditions of the Russian winter. If you are thinking about which company plastic windows are better to choose, the reviews of the happy owners of these designs will help you decide. Buyers emphasize that Rehau offers its customers environmentally friendly products.

These windows have become very popular in our country due to their affordable prices and high quality. The company's product range is different huge choice colors and shapes.

The famous brand produces several types of double-glazed windows from different lines - DESIGN 70, EURO and BASIC DESIGN. EURO are products with increased noise insulation, protection from wind, heat and sun. Profiles are reliably protected from burnout and damage from temperature extremes.

The BASIC DESIGN line has more than low protection from noise and atmospheric influences. However, the manufacturer guarantees that the windows will last more than 10 years. The prices are also pleasing, although it should be noted that they vary depending on the design features of the model: a blind window costs from 2.5 to 3 thousand rubles, a standard one from 8 to 12 thousand rubles.

Veka windows

If you are interested in which company plastic windows are better to choose, pay attention to the products of the VEKA brand, well-known in Russia. According to consumer reviews, the double-glazed windows of this German company firmly occupy the second place in popularity.

This company was established in 1969. Russian market she presented nine types of profiles, including unique five-chamber models. The company has two operating plants in Russia.

VEKA windows are of the highest quality and quite reasonable prices. The corporation has released several classes of its products, which have their own characteristics - colors, shapes.

Huge selection of shapes - arched, rectangular, trapezoidal and even round - distinctive feature products of the company. In addition, there is a variety of stylization, a variety of colors.

The most popular in our country are VEKA EUROLINE windows, which are distinguished by insulated profiles, simple shape and affordable price. VEKA SOFTLINE is a classic product with increased durability, spectacular appearance and sound insulation.

The VEKA ALPHALINE line is distinguished by a large selection of colors and shapes and has the most powerful thermal insulation (three-circuit). Prices for these quality windows range from 3.5 to 5 thousand rubles, depending on the line you choose.

KBE windows

Today, many people who are beginning to wonder: "What windows are better to put in an apartment?" Plastic structures of the German company KBE, owned by the Profine concern, are well known in the Russian market. The brand presents five modifications - from the budget line "Engine" to the elite products "Select".

KBE profiles have been manufactured in Germany since 1980. Today they are produced at two Russian factories: in Khabarovsk and Voskresensk. The quality of their double-glazed windows is as high as in Germany.

In the production of the company's products, energy-saving spraying and argon filling of the chambers are used. The cost of such windows is from 6.2 to 8 thousand rubles.

"Samara window constructions"

Today, many of our compatriots, who cannot decide which plastic windows are better to install in the apartment, have the opportunity to support the domestic manufacturer by choosing SOK windows. Since 1999, the company has been part of the German concern Profine. The production is located in the city of Syzran (Samara region). The fittings are manufactured by Aug. Winkhous Gmbh. & Co. KG, which celebrated its 160th anniversary last year. She specializes in the manufacture of window and door mechanisms.

KBE profiles are produced not only by traditional white, but also laminated, which allows you to order models that fully meet the design of your home.

The company presents profiles of three types: SOK 3, SOK 4 and SOK 5. The number means the number of chambers in the double-glazed windows. These designs comply with European standards. The cost of a standard window varies from 5 to 7 thousand rubles.

SALAMANDER windows

The German company SALAMANDER is represented on the Russian market by three modifications of window profiles: 2 D, 3 D and Streamline, which has rounded frame and sash shapes. Judging by customer reviews, the company's products do not stand out in anything other than traditional German quality.

By the way, the company produces not only windows, but also balcony pairs and doors. The main advantage of this company is experience and quality. SALAMANDER windows are regularly tested and comply with international standards.

Prices for all of the brand's products are much higher than those of their closest competitors. This significantly affects the demand for these products. In addition, SALAMANDER windows are only available in white. Forms are standard - rectangular. Prices are quite high and depend on the class of the selected product. A blind window will cost you from 3 thousand rubles, a standard rectangular opening - from 6 thousand rubles. Elite line models can be purchased for 15,000 rubles (starting price).

Deceuninck windows

Designers often help their clients in deciding the question “how to choose reliable plastic windows for an apartment”. V recent times they increasingly recommend paying attention to Deceuninck products. It is one of the pioneers in the production of PVC systems in the world. In addition, the brand became one of the founders of the Union of Manufacturers of Plastic Profiles in Russia. The concern owns Thyssen Polymer. It has been producing PVC windows since 1965; the company appeared on our market in 1997. Several years ago, production was organized in Russia. Today Deceuninck windows are worthy of competition to such as Veka, Rehau, KBE

The first samples presented to the Russian buyer were Zendow, AD, Favorit, Bautec, Forward, which met all the requirements of their time and at the same time had quite affordable prices. However, time passed, requirements grew, materials and technologies improved. Only the last three models remain from the mentioned list today (although Favorit and Bautec are also obsolete today). However, they were replaced by two models, much better adapted to the harsh Russian climate: Favorit Space and elite Eforte. The cost of the brand's products is from 4 to 15 thousand rubles.

Schuco

Not all consumers know which windows are best to put in an apartment. Some believe that the more expensive a product is, the better it is, others are sure that the most important thing is the material, others think that the main thing is the level of sound insulation. In fact, high-quality PVC windows should have all these characteristics.

As for Schuco windows, even very popular brands cannot always compete with them in quality. The fact is that all production is concentrated in Germany. In this regard, the brand's products are of the highest quality.

The company supplies the Russian market with three types of profiles: three- and five-chamber double-glazed windows... In addition, the company also produces seven-chamber models. All products in Russia are considered elite. The price varies from 6.8 to 18 thousand rubles.

Montblanc

Often, people do not consider the products of domestic manufacturers when they think about which windows are best to put in an apartment. Photos in special editions most often advertise products of well-known world brands. Nevertheless, we advise you to pay attention to the Russian company Montblanc.

The production is based on German equipment, but the factories are located in Russia - in Elektrostal and Khabarovsk. Their products have appeared on the market since 2001.

The company presents six modifications of profiles: two with five chambers and one with six chambers. These products are classified as economy class. Price - from 3.5 to 6.2 thousand rubles.

WDS windows

When we decide which plastic windows are best to put in an apartment, the price factor is often decisive. It is thanks to him that the products of the famous WDS window profile very quickly gained a good distribution in our market.

The company focuses on a buyer with an average income level. WDS windows have two main characteristics - affordable price and good quality. The models do not differ in sophisticated shapes and a variety of color schemes, they do not have excess functionality. Traditional rectangular double-glazed windows are available with blind or opening, medium and highly insulated. Therefore, the prices are reasonable: an opening window costs from 4.5 thousand rubles, and a blind one - from 2 thousand rubles.

Which firm's plastic windows are better? Customer Reviews

We introduced you to the main manufacturers of these products, which are now dividing the Russian market. However, we are sure that the information received does not yet allow you to decide which plastic windows are best to install in the apartment. That is why we want to refer to the reviews of the owners of profiles of various companies. This will allow you to make your final choice.

We could not find negative reviews about the windows of the REHAU company. People assure that these products are really high quality, the contractual deadlines are respected, specifications fully correspond to those declared by the manufacturer. There are some complaints about the high price, but, as you know, a quality item is never cheap.

Veka company enchants its customers not only with excellent quality, but also with perfectly organized work of personnel - managers, measurers, installers.

Reviews of KBE windows are mixed. At not the lowest prices, some buyers are satisfied with the purchase, but there are also many who complain that the windows are leaking and moldy. Therefore, people recommend purchasing Standard and Etalon windows, as well as choosing high-quality fittings.

Problems with contractual terms may arise with the products of Samara Window Structures. Unfortunately, they are not always observed. There are many complaints about the work of the installers.

The quality of SALAMANDER windows does not cause any complaints. However, many are not satisfied with the rather high price.

Deceuninck's designs don't turn out to be all that great. Many complain about poor sound insulation, black blotches appear on the profile. There are a lot of angry words addressed to the company's management about poor-quality installation.

But the majority of buyers are satisfied with Schuco windows. The products are of high quality, and besides, there is such a service as five years of free service.

The same can be said about the products of the domestic company Montblanc. At affordable price the quality is excellent. Buyers also note the professionalism of the employees.

WDS windows fully meet the declared characteristics, while the reasonable price pleases. Only a small selection of colors and shapes of models upsets.

When planning to replace the old frames in the house, many are faced with the question - which plastic windows are better? The quality of a metal-plastic profile depends on the manufacturer and the material that he uses during production. But that's not all: the long service life of a plastic window depends on the right choice profile for specific conditions (climate, building type), assembly and installation quality. Unscrupulous sellers can profit from people who do not understand the characteristics of a really high-quality profile, trying to sell a product of average and poor quality at a higher price. To avoid this, we recommend that you familiarize yourself with the recommendations for choosing a plastic window and the rating of manufacturers based on feedback from consumers and experts.

What is the best profile for plastic windows?

To answer the question which plastic windows are better, you need to consider the main characteristics of double-glazed windows. Starting from technical parameters profile, you can evaluate its quality at the time of purchase, so as not to be mistaken with the choice.

Material and profile uniformity

Plastic window structures are made of a material that is part of the thermoplastic group - polyvinyl chloride. During production, stabilizers, modifiers, plasticizers, pigments are added to powdered PVC. They make window structure durable, resistant to ultraviolet and other weathering. All PVC additives are harmless and do not harm human health.

But you should not choose cheap profiles - usually they add low-quality plasticizers. Therefore, when buying a window system, it is important to pay attention to the presence bad smell and too cheap cost- in this case, there is a risk of purchasing a product with a questionable composition.

To give strength and rigidity to the structure, it is reinforced with metal from the inside. Externally, the buyer will not be able to distinguish a high-quality, reinforced structure from an unreinforced one, therefore, you can check the presence of metal inside it using a magnet.

The coating of a quality profile must be smooth and uniform. A grainy surface with streaks or a gradient is a sign of a fake.

Output: high-quality PVC profile is distinguished by uniform coloration, smooth surface, and has no unpleasant odor. The composition and environmental safety of the window profile must be indicated in the manufacturer's certificate for the product.

Wall thickness

The wall thickness of the PVC profile determines how long the window will last and how it will retain its shape from loads during operation. In accordance with the thickness of the outer and outer walls, there are three groups of structures:

The question may arise: which windows are better to put in an apartment of these three classes? Class A profile - the best option... It is used for glazing houses, apartments, offices. You can check the wall thickness when buying at the seller's office - he must provide samples of metal-plastic profiles in a section.

Output: choose a design with a wall thickness of at least 2.8 mm. In this case, it is necessary to ensure that the thickness of the profile is uniform.

Number of air chambers

Air chambers are hollow spaces inside a window unit, which are formed by its partitions.

The more cameras, the better window retains heat, and the higher its sound insulation qualities. The minimum number of cameras is three.

For an apartment, 3 and 5-chamber structures are usually sufficient, they are the most common.

Output: for glazing an apartment in a temperate climate, a three-chamber system is sufficient. But for glazing a private house with increased energy saving requirements, it is better to choose 5 or 6-chamber PVC windows.

The number of double-glazed windows and their characteristics

One double-glazed window consists of several glasses connected to each other along the contour with a special frame and sealant. Between them are sealed air chambers, sometimes filled with another gas.

By the number of double-glazed windows, window systems are 1, 2, 3 and 4-chamber:

1. Single-chamber double-glazed windows are the lightest. They consist of one air chamber and two glasses.
2. Double-glazed windows, as the name suggests, consist of 2 air chambers separated by three sheets of glass.
3. Three- and four-chamber double-glazed windows are heavy, let in less light than one- and two-chamber ones. Usually they are installed under the condition of living in a harsh climate with cold winters.

Due to their light weight, single-chamber double-glazed windows are well suited for glazing panoramic windows on terraces, balconies, and loggias. But such glasses are too “cold” for an apartment or a house.

The quality of the glass also plays an important role. There are windows with ordinary glass, but there are double-glazed windows with the following features:

• Anti-vandal glass coating. It protects the surface from impacts and other mechanical influences, making the glass more durable.
• Toning: protection from direct sunlight.
• Triplex laminating: when broken, the glass does not shatter into sharp fragments.
• Energy saving glass. A special coating shields heat rays from the room back, reducing heat loss in the room.

Output: double-glazed windows are most suitable for installation in residential buildings and apartments, with good thermal insulation properties. But for a harsh climate, it is better to choose thicker double-glazed windows.

Profile width

The profile width depends on the number of cameras. The wider it is, the warmer the window will be, and the more stiffening ribs inside the structure. The second factor speaks of the strength of the PVC block, since small-chamber structures are easily deformed.

Manufacturers produce profiles with a width of 58 to 90 mm. Window systems with a width of 58-70 mm are considered the most common, they are suitable for the normal provision of warmth and silence in the house. Width 58 mm is typical for single-chamber windows with double-glazed windows up to 32 mm thick.

The 70 mm wide construction will provide better performance. Suitable for most regions of the country. This profile is used for double-glazed windows 40 mm wide with glasses of any type.

Output: if you live in a region with severe winters, it is better to choose double-glazed windows with an assembly width of 80 mm or more. They show the best heat saving qualities. For other regions, a width of 58-70 mm will be sufficient.

Which company is better to install plastic windows?

Having familiarized yourself with the main characteristics of plastic profiles, another question arises - which plastic windows are of the highest quality? When choosing a brand, that is, a manufacturer of a window block, you can rely on reviews from other consumers, recommendations of friends or expert advice. On the world market, the main leaders have long been identified, so the choice should not be particularly difficult.

REHAU windows

A German mark, but the production of windows in Russia began in 2002. The company provides each plant in Russia with its own quality certificate, so there is no need to doubt the level of the product being manufactured. REHAU is a wide range and high quality:

• Window system BLITZ New: 3-chamber windows 60 mm deep. Energy-saving glass with two sealing circuits.
• DELIGHT-Design: 70 mm wide 5-chamber windows. The height of the profile structure is reduced, which makes the window leaf wider. Because of this, the structure lets in more light into the room.
• GENEO: 86 mm deep 6-chamber windows with an additional (center) seal loop. Provide maximum sound insulation.
• EURO-Design: 3-chamber systems 60 mm deep with two sealing circuits. A varied palette of shades, a choice of textures.
• BRILLANT-Design: window system with five air chambers and 70 mm depth. Profiles with a smooth, shiny surface. The shade of the profile can be selected according to the RAL scale.
• GENEO HST: lift-and-slide window system. Two options: standard and barrier-free.
• SIB-Design: 3-chamber system with thermoblock (5) chambers, depth - 70 mm. Thanks to the “thermoblock” insulating chamber, windows are often installed in regions with a temperature difference of more than 60 C.
• INTELIO 80: system with 6 air chambers 80 mm deep. In winter, a double-glazed window protects the room from heat loss, and in summer - from overheating sunbeams... The system is suitable for the production of panoramic windows.
• EURO-Design Slide: sliding system for balconies, loggias, terraces with two sealing contours.
• GRAZIO: 5-chamber system, 70 mm deep. Provides good sound insulation, burglar resistance, air and water resistance. Smooth surface profile.
• INTELIO: 6-chamber system with energy-saving glasses. Low porosity window surfaces are easy to maintain.

Veka windows

Veka is a German brand. The subsidiary production company of this manufacturer “VEKA Rus” is located in Russia. The products have been awarded the German quality mark, so they comply with all control standards. Veka profile catalog:

• Euroline: 3-chamber, 58 mm wide. Double-glazed window double and single chamber. They make double-glazed windows with triplex, soundproof, energy-saving. Burglar-proof and childproof fittings.
• Softline: multifunctional solar control glass unit.
• Artline: 6-chamber system 82 mm wide. Suitable for the manufacture of windows and balcony doors... Three sealing circuits. The window sash is hidden behind the frame.
• Softline 82: 6-7-chamber system, 82 mm wide. Profile thickness 3 mm with reinforcement.
• Swingline: 70 mm wide 5-chamber system with rebate seal.
• Proline: 4-chamber profile, 70 mm deep.
• Sunline: sliding 3-chamber system 58 mm wide for glazing balconies and loggias with reinforcement.

KBE windows

The brand is a German manufacturer, but in Russia any manufacturer of plastic windows can sell the KBE profile. The cost of KBE window systems is lower than that of the first two manufacturers. During production, the Greenline technology is used, which eliminates the impurities of heavy metals in PVC. KBE systems are often installed in the mass development of capital objects. KBE window systems are produced in mounting widths of 58 mm, 70 mm, 76 mm and 88 mm.

Among the units of production there are blocks with air chambers in the amount of 3 to 7 pieces, which can withstand a drop in temperature down to -60 C.

The design of the windows is characterized by curly sashes, lamination, and the presence of aluminum overlays.

SALAMANDER windows

German manufacturer with a representative office in Russia and a manufacturing plant in the Republic of Belarus. Window systems are notable for their not small price, but you can be sure that it meets European quality standards. SALAMANDER produces profiles with widths from 60 to 92 mm 3, 4 and 5-chamber systems.

They are distinguished by their design: rounded sashes, the presence of aluminum overlays, more than 30 decors of lamination. The blocks retain their color for a long time thanks to a special surface sealing technology.

Deceuninck windows

The Belgian brand Deceuninck is represented in Russia by only one manufacturer. Deceuninck products are ISO certified in Belgium and Germany. There are conflicting reviews about the window systems of this manufacturer, which cannot indicate a dubious quality. The disadvantages of this brand are the expensive price for outdated modifications.

The product line is represented by high-performance window systems with mounting widths of 60, 71, 76 and 84 mm with the number of chambers from 3 to 6.

Rating of firms

The brands listed earlier can be ranked by rating, which is based on parameters:

• popularity of the company among Russian consumers;