How sometimes there is not enough space on the balcony! If you know this feeling, then you have probably thought more than once about how to make shelves on the balcony. With the appearance of shelves on the balcony, you will finally have free space and it will finally become easier to breathe. But inviting workers is very expensive, and therefore there are not many options left: making shelves on the balcony with your own hands, or turning to experts for help.

How to make a shelf on the balcony with your own hands

Given the recent crisis and inflation, hiring workers will not be the best best idea. So the involuntary question arises: how to make a shelf on the balcony with your own hands? From the outside it may seem that this is not a feasible task, but in fact, “the wolf is not as scary as they paint him.” At the very beginning, you need to decide on the type of shelf. You can make three types of shelves:

Flower shelf

• Corner shelf
• Shelf along the entire length of the balcony.
• Flower shelf

Building shelves for flowers on the balcony is quite simple. Since the shelf is small in volume, it doesn’t take long to make it. You need to decide on the size and width of the shelf. Depending on how many pots there will be on the shelf, the width of the shelf will change, and depending on the height of the plant, the height of the shelf will change accordingly. It is important to choose the material so that it does not deform due to the weight of the plants, but in fact almost any material can be used, so your imagination is not limited by anything. The shelf should consist of two parts. The most common material for shelves is wood or chipboard. This material It is easy to fasten and is also quite durable.

The first part will be the main part, and it will be the wall of the shelf and fit tightly to the wall. This part will be completely perpendicular to the wall. The second part will be attached to the first board with furniture screws, the screws are located on the back side of the first part. You make the measurements, and you can adjust the size that will be most comfortable for you. You can attach hinges to the shelf, which will later secure the shelf to the wall. The support will be evenly distributed along the entire length of the shelf, so it will not fall.

Corner shelf

Corner shelves on the balcony are now very popular. Beautiful view Compactness and convenience make the shelf indispensable! But compared to a flower shelf, the design of a corner shelf will be a little more complicated. In this case, you need to accurately determine the height of the shelf itself. You need to understand whether the shelf will rest all the way to the ceiling, or whether this shelf will be smaller. It is also important to determine the size of the sections of the shelf itself. It is quite clear that they should not be very narrow, but also very wide. It’s also not unimportant how many sections you have. It is important to consider that the fewer sections, the less stability your rack will have.

The advantage of making the shelves yourself is that only you choose the width and height. So, you will need two main boards (or any other material that will be quite stable), as well as several boards for partitions, which gradually form shelves. The average standard shelf size, which is considered a standard, is 35-40 centimeters in height. On average, you should have 5-6 shelves from floor to ceiling. The partition itself should be screwed with two furniture screws on one side and two screws on the other. The first and last boards should be about twice as thick as usual, since the bottom shelf will serve as support, and the top shelf should be able to put some things. For beauty, convenience and safety, sharp corners on the shelf itself can be cut off.

Shelves across the entire width of the balcony

So, we make shelves on the balcony without leaving and using all the available space. And compared to a corner shelf (which also saves space), it is much easier to manufacture. This shelf will allow you to take up maximum space, and the cost of material is minimal. The design of this shelf is so simple that even a beginner who has not previously had any experience in assembling furniture will not get confused in its manufacture. You will need slats (small blocks) that will hold your shelf. The shelf itself will consist of one board or other material. It is important to accurately measure the width of the balcony, and then cut the shelf sheet about two centimeters less than the width of the balcony. In this case, your shelf will fit well between the walls of the balcony, and at the same time will not fall out of the fasteners. The blocks themselves should be the same length as the shelf, and at least two to three centimeters wide. Self-tapping screws need to be screwed in approximately every 5-10 centimeters (depending on the length of the bar). This shelf, just like the corner shelf, can be made either up to the ceiling or smaller.

You honestly exchange your money for labor. Making shelves does not require any special skills. Therefore, there is no point in calling workers, especially since something made with your own hands is much more pleasant to look at!

A balcony should always be considered as additional space in our apartments - if you organize it wisely, you will get a more than decent increase in the living space. Of course, it’s unlikely that you’ll be able to organize a full-size room here, but here’s a corner for work or relaxation, green garden or a well-appointed pantry - quite. Such a room will definitely need to be furnished, and an important component The furnishings will be a rack for the balcony.

By installing a rack on a balcony or loggia, you get an ideal place to store many things - canned goods or tools, books or things that are rarely used in the house, spectacular plants or decor collections. The balcony rack will not take up much space and will not look bulky, because the shelves in it are open. In addition, by changing the shape of the shelves or the dimensions of the furniture, you get the opportunity to experiment with the visual proportions of the room - stretch it up or make it wider.

Existing shelving options

When deciding how to make a rack with your own hands, you can give preference to one of the following options:

• open shelves, that is, a traditional shelving unit mounted along one of the balcony walls. The shelves are secured with special brackets and are intended for storing workpieces, products, and things;
• low shelving located around the perimeter. Their top will also be used as a shelf or become a tabletop or seating area. For open balconies, this option is considered the most common;
• corner rack considered ergonomic and roomy. Most suitable for loggias. The design provides corner shelves, which are attached with brackets to two adjacent walls;
• built-in shelving most often found on the loggia. In this case, shelves are hung in existing niches.

Note: Balcony racks can be closed with folding accordion doors or roller shutters. This way, the “contents” of the shelves will not be noticeable, and the ergonomics of the design will not be affected.

What criteria must a balcony rack meet?

When making a rack for a balcony with your own hands, you should calculate in advance what load will fall on this structure, that is, what exactly will be stored on the shelves.

The main requirements for structures are:

• high strength;
• safety - all fastening elements must be very strong;
• resistance to humidity - neither defects in the tightness of the structure nor excessive watering of plants should affect the appearance and functionality of the rack;
• optimal dimensions - the shelving for the loggia should be spacious, but not take up all the free space;
• correct placement - the rack should be positioned in such a way that its elements do not interfere with the passage of light (both natural, from windows, and artificial, from installed lighting fixtures).

But it’s not enough to know how to make a shelving unit on a balcony—it’s also important to choose the right material for such furniture. After all, on loggias (especially if we are talking about open and uninsulated ones) there will be sharp temperature changes and increased level humidity. Therefore, wood and chipboard are recommended to be used only on glazed and insulated balconies.

Important: chipboard does not tolerate moisture very well, and therefore will quickly warp in an inappropriate microclimate. Plastic is an excellent alternative for balcony racks. Veneered sheets and glass are also suitable.

To protect against high humidity metal elements coated with paint, and wooden ones with varnish. And keep in mind that metal frame able to withstand more significant loads compared to wood.

We make a metal rack on the balcony

Of course, traditionally for cozy home natural wood is used - this is an indicator of luxury and status. But metal racks are superior to wooden ones in strength and can support even very heavy objects. Besides, metal racks are inexpensive and compact, and can also be repaired locally - any worn element can be easily replaced.

Tip: You can make a metal balcony rack with your own hands even more durable if you paint it. This way, the structural elements will be reliably protected from corrosion when exposed to moisture (on an open balcony or during regular wet cleaning).

Making a galvanized metal rack will require a minimum of tools - a hacksaw, a tape measure and a screwdriver will be enough. The work is carried out as follows:

By the way, a metal perforated rack can be mounted on the balcony in two ways:

1. Separate from the wall. Not too much reliable fastening, since it may tip over due to load displacement.
2. To the wall. It is considered a more reliable method and is most often used. For this purpose, fastening is provided in the rear using a special bracket. At the end, such a bracket is curved - it then clings to one of the racks and pulls it to the wall, securely fixing it. A hex wrench is used to secure the metal shelving.

Next, work is carried out to assemble the metal rack: the parts are inserted into metal fasteners so that a rectangle is formed. The dimensions must be controlled, since all fasteners are adjustable within 10-20 mm. Then the frames are fixed on vertical posts, and you constantly need to check the horizontal and diagonal (you will need a tape measure and a level).

Assembling the structure

You can also assemble a metal rack using welding, but carrying out such work on the balcony will be difficult. Moreover, bolted structures are more aesthetically pleasing and practical, since the shelves in this case will be removable.

By the way, it is not necessary to make such shelves for the entire height of the ceiling - after all, you also need to take into account the permissible loads on the floor slabs. So you can limit yourself to 2-4 shelves. From the assembled finished structure, you can get, for example, a flower rack.

Another useful element of furniture is. You can also buy it ready-made or make it yourself.

Do you know what and how you can organize? Details in our separate article.

If you plan to grow flowers on your balcony, we recommend our article about choosing pots. decorating tips.

How to make a wooden shelving unit

A wooden rack is a budget-friendly and relatively simple design. How to make a wooden rack with your own hands on the balcony? Its production is carried out according to the following algorithm:

• the balcony is cleared of things and debris;
• the space is carefully measured and a plan for placing the shelving is drawn up, which takes into account its height, number of shelves and purpose;
• plywood and pine beams are purchased: timber with a section of 50x50 mm, and the thickness of the plywood is selected depending on the expected load on the shelves;
• corners and screws for fastening are purchased;
• the frame is made: 2 beams are fixed to load-bearing wall, for which dowels are inserted into the holes made with a hammer drill, and self-tapping screws are already screwed into them;
• jumpers are placed between the vertical beams - their number depends on the number of shelves;
• on opposite side the balcony is made of the same frame from timber;
• the lowest element will be a shelf, and two additional beams are placed under the ceiling;
• wood can be painted and varnished to protect the structure from moisture and wear and give it aesthetics.

It is better to choose plywood or laminated chipboard for shelves, rather than regular ones. Chipboard does not tolerate excess moisture well and can delaminate under heavy objects.

If you think through the entire design down to the smallest detail, then the rack on the balcony will delight you with both spaciousness and beautiful appearance.

According to the old tradition, things that do not have a place in the apartment are stored on the balcony and loggia. And to prevent these small-sized premises from turning into a landfill, it is necessary good system storage Most practical option- built-in wardrobe on the balcony or loggia. Often all that is required is to make constructions that will hold the shelves and install doors. You can easily cope with such a task with your own hands, even with a minimum of skills.

Materials and designs

The design of a built-in wardrobe can be divided into two parts: the frame and the doors. Sometimes, if a side stand is needed, there is also trim available.

What is the frame made of?

Cabinet racks are most often made of timber. The cross-section is approximately 40*40 mm or 50*50 mm. The option is not bad, but on an unheated balcony it may be high humidity. And wood is a material that changes size depending on humidity. There is one more point: timber is not cheap in all regions.

There is another option - to assemble the frame on a drywall profile. Any sheet material like , etc. can be easily attached to it. If you take galvanized one, then there are no problems with moisture.

What to make shelves from

The easiest way is to cut the shelves to size from sheet material. This is still the same chipboard - regular or laminated, thick plywood can sometimes be used, but shelves for heavy objects should be on a wooden frame.

They can be attached to places prepared on the frame - installed bars or with self-tapping screws. There is an option - the corners are directly against the wall. But it is good if the walls can be drilled with self-tapping screws right away, otherwise it will take too long to install each shelf on dowels. Then it’s easier to assemble the frame and attach it to it.

There is an even simpler way to make shelves on a balcony or loggia: use metal guides and brackets for them. These systems are used in stores, but for this case They are more than comfortable: the height can be changed easily with fairly small steps. The brackets are simply moved to other holes.

With such an organization, all that is needed is to install the doors. Now the closet on the loggia or balcony is ready.

By the way, you can make something similar from wooden blocks: recesses for shelves with a certain pitch. You can make cuts with a saw and then remove them with a chisel.

Often shelves are made from cut pieces of boards. Since the width of the balcony is usually small, all sorts of trimmings are used. Just so that they do not lose their appearance for a long time and are easily wiped off, they need to be covered with something. And although glazed balconies and loggia are more interior spaces, take paint and varnish products for outdoor use, as well as protective impregnations. They contain substances that protect against ultraviolet radiation. Without them, in a couple of years the wood will look pitiful.

To prevent the apartment from smelling too much when working, you can use varnish water based. It does not create a film, but dirt is not absorbed into the surface.

What types of doors are there?

There are three types of doors for a closet on a loggia or balcony:

• ordinary swing;
• sliding - like a wardrobe;
• roller shutters

All these doors can be the entire height of the cabinet, but it is more convenient to divide it into two or three parts, and hang its own doors on each.

The most inexpensive are hinged doors. You need the doors and hinges themselves, and it’s easy to “put” them in place yourself. More expensive sliding systems. You need guides - top, bottom and side, as well as a roller system that is installed on door leaf. But this option is attractive because it saves space.

The most expensive are roller shutters. But they are attractive because they go ready-made kit, and installation is basically “included” with the purchase.

Watch the video on how to assemble sliding doors for a balcony closet. Much will become clearer.

How to make a balcony cabinet on a wooden frame

First, cut 4 racks to the required height of the cabinet. If you plan to make it all the way to the ceiling, measure each one separately, rather than cutting identical ones. The height is often quite different. The cut racks are fastened. The distance between them determines the depth of the cabinet, but most often depends on the available space. As much as there is, so much is used.

If there are three blank walls there are no problems. The bars are attached to dowels. Place the block against the wall, check its verticality, drill holes through for fasteners in in the right places. The plank is removed and plastic plugs from the dowels are inserted into the holes in the wall. Having installed the bar in place, screw it to the wall.

If you are making a cabinet on the balcony, one side is attached to the wall, and the other - to the frame elements or only at the top and bottom - to the ceiling and floor (we use reinforced metal corners).

Another option for such a case is if you need to cover it with something window glass— place a wall near the window (for example, made of laminated chipboard), fix it at the bottom and top with corners to the floor and ceiling, and then attach the frame bars to the wall (and to the stream and floor).

Then cross bars are nailed to the posts. They give the whole system high degree rigidity and the shelves will rest on them.

To avoid wasting space near the glass, this part is also occupied by shelves. Since the width of the furniture varies, two separate small cabinets are often made: for the lower and upper halves. They often also differ in depth: the bottom one can be made wider and heavier and larger items can be hidden there. Upper cabinet in this case, you can make it less deep. In this case, the top of the lower cabinet can be used as a tabletop.

Corner wardrobe on the loggia: photo report

At first, the loggia was covered with clapboard. Immediately after this, they began to make a cabinet from the same lining. It was decided to go for a corner one so as not to cover the window so much. On the opposite side, the cabinet occupies almost the entire width, slightly short of the balcony door.

The racks were not attached. They nailed the bars on the ceiling and to the floor, and the walls to them. They turned out to be short - three planks. Planks were nailed to the wall paneling, on which the same paneling, cut to the resulting cabinet shape, was laid.

At the top and bottom of the doorway, clapboard was placed across the opening. We measured the remaining distance, subtracted 1.5 centimeters for inaccuracies, and cut the paneling on the door to that length. It took six of them. They knocked it down using four cross bars and knocked it into the door. Hung using regular hinges.

IN free space There are two shelves nailed between the closet wall and the balcony paneling. A little later they added a little higher with rounded edges. The last step was to nail the plinths under the ceiling and on the floor (to close the gaps), then sand the lining with sandpaper and paint it with stain.

Drawings and diagrams

It is impossible to talk about any standards regarding cabinets for balconies. And the sizes and configuration, and the glazing is different for everyone. Therefore, even the size of the shelves has to be determined “on the spot”. But here are a few examples that you can change as you need.

Photos of finished cabinets on the loggia and balcony

Not quite a closet - a seat with a drawer underneath

The choice of shelves for a balcony is determined by its design and features. If the balcony is open, then you can equip it with hanging or wall shelves. The advantage of the former is the ability to remove them for the winter.

If the balcony is glazed, then the possibilities open up much more. Structures attached to walls, racks and cabinets can be used. The variety of materials used is also increasing.

how to make a shelf for a balcony with your own hands. Photo step by step

Materials for balcony shelves

When they are going to make a shelf for a balcony with their own hands, they start with selection of material. Determine unambiguously best option impossible. Specific capabilities and needs must be taken into account. A beautiful shelf on the balcony can be made from old chipboard wooden furniture, wood, glass and metal. There are many options. It is worth remembering that all materials containing wood should be protected from moisture. The humidity on the balcony can be high.

Balcony shelves made of chipboard

Apartment owners often wonder how to make a shelf for a balcony with their own hands. from chipboard. The process cannot be called very complicated, since the design is limited on two sides by the walls of the house, and on one side by the fencing of the balcony itself.

DIY balcony shelf. Photo

The process of making a shelf for a balcony with your own hands begins with markings. Using a tape measure and a square, mark the walls and ceiling with a simple pencil.

Attached to the side bars chipboard sheets , forming side walls. If you wish, you can close the back wall. For it, thinner sheet material is used.

The crucial point is the marking side fasteners. If there is the slightest inaccuracy, the shelves will be positioned unevenly.

To secure the shelves, use corners. Depending on the size of the shelf itself, four or six are required. They are attached two at a time to the side walls and two more to the back. The shelves are put in place, checked for levelness, and then attached to the corners.

Shelves can be closed doors. In this case, you need hinges, a handle and a magnet for one door. The number of doors is determined by personal convenience. This could be the one common door, a separate door for each shelf, or two doors per shelf.

First they mark the places hinge fastening, then they are installed on the side wall. Next, the hinges are screwed to the doors. Make adjustments so that everything closes tightly enough. After this, the magnets are screwed on, and the handles are installed last.

This method of installing balcony shelves is the main one. The details vary, but the basic scheme remains the same.

Often, when creating such shelves, they save on materials and make only one side wall. In this case, bars are attached to the opposite side, onto which the shelves will be attached.

how to make a shelf for a balcony with your own hands. Video step by step

DIY glass shelves for a balcony

If the space on the balcony is decorated in modern style and there is no desire to use bulky structures, then the best option there will be glass shelves. To create them you will need glass, aluminum profile and fasteners.

1. Does on the wall markings for fasteners. To do this, choose a flat section of the wall. A horizontal line is drawn along the level, and the locations of the fasteners are marked on it. Holes are drilled in these places.
   
2. Check the fit of the mounting holes by applying profile. IN drilled holes insert dowels. The profile is secured with one screw, leveled and the remaining screws are screwed in.
   
   
   
   
   
   
   
   
   
   
   
3. Take pre-cut glass shelves . It is better if their edges are sanded. The back edge is sealed with adhesive tape. You can also use spacers made from such tape in those places where the glass comes into contact with the screw heads. The glass is inserted into the fixed profile. Its edges must be closed protective caps. If the shelves touch, they are fastened together using special metal fittings.
   
   

This interesting option shelves on the balcony that decorate the space. Such shelves are mostly used for placing decorative items.

Do-it-yourself wooden shelf for the balcony. Master class

To make original shelf on the balcony, you will need a rope, a board two centimeters thick, and various fasteners.

First the board sawing on the bars. You should get two wider bars - six centimeters wide, and eleven bars five centimeters wide.

DIY wooden shelf. photo step by step

In these bars drill two holes at the ends. They should be located closer to the edges of the wooden part.

We pull through the holes laces. The widest elements should be placed first and last. The bars are separated using metal washers, which are placed on a cord in three pieces. Metal corners are placed on the outer parts.

Ready-made interesting option for a shelf on the balcony fasten to the wall.

As you can see from the examples described, making a shelf for a balcony with your own hands is not at all difficult. The most important thing is to follow the instructions. There are a huge number of options for original and interesting shelves. Just look at the photos of shelves on the balcony to find new ideas.

Beautiful shelves on the balcony - photo

To make the balcony look attractive, it needs to be equipped. A mandatory component is furniture, and in particular shelves on which things are stored or placed decorative items. Let's consider beautiful options balcony shelves that harmonize with the surrounding space.

.Wooden shelf rack. It is covered with dark varnish, which creates the effect of aging wood. The shelf matches well with the rest components balcony design. This rack is convenient for storing the most various items, including construction tools, magazines and much more.

DIY wooden shelves for the balcony. photo

.Lightweight shelving mounted against an end wall. If you look at this photo of the shelves on the balcony, you can see interesting ideas. The white shelves stand out beautifully against the gray wall with a natural wood grain pattern. Since they are discreetly attached to the side walls, a feeling of weightlessness is created.

The shelves are similar in placement and visual lightness to the previous ones. But this option lies on supports that are attached to the rear wall. The bottom shelf is made wider and looks like comfortable table. The shelves themselves are made of natural wood, preserving natural color and textures.

photo of shelves on the balcony

. Wooden rack for the balcony consists of four corner supports and slatted shelves. This rack is quite simple, stable and durable. It can be used to store any things. It is ideal for a balcony, which is used as a storage place for various items.

. Wooden shelves on a natural colored wall and textures are combined as fully as possible with the wall decoration. It also has the color and texture of natural wood. These shelves can be called decorative. They are not intended for storage, but for placing decorative elements.

wall shelves to the balcony with your own hands. Photo

. A neat, light shelf for interestingly shaped books. The edge directed towards the window is beveled, which makes the shelf less massive. Fastening is done using corners. This shelf is spacious, but looks light and almost weightless.

.Shelf ladder It will look good on spacious balconies. It is made in the form of a curved staircase that goes to the ceiling. At the bottom there are wide shelves - steps, and the higher they rise, the smaller they become. This visually increases the length of such a structure and the height of the ceiling.

. An original, dynamic-looking shelf, composed of rectangular elements. The feeling of movement is created due to the displacement of elements relative to each other. At the same time, the white color of the structure and the absence of a back wall make it visually light.

.Two fairly thick shelves create a feeling of solidity. At the same time, they are painted white, which makes them lighter visually. There is no heaviness effect that could be had when using a dark color.

These balcony shelves are presented board lying on supporting corners. It is the curly corners that are of interest here, which refer us to the country style. The delicate light brown color makes them appearance even more harmonious.

. Rack white . The shelves are wide at the bottom and narrower at the top and have side edges. This creates a feeling of reliability. In addition, items will not accidentally fall behind the rack; they can be placed anywhere on the shelf.

The shelves are quite thick, as in one of the previously seen photos of shelves on the balcony. At the same time they are painted in red. This color makes them stand out against the background of a light wall and makes them a decoration for the balcony.

. Shelf-rack stylized as antique china cabinets. It is made quite simply. There are four supports and side walls with shelves between them. There is no back wall. The back decor is crossed slats, which give originality and completeness to the entire rack as a whole.

An interesting option for a balcony rack that resembles industrial racks. A metal base is used to create cells. These cells contain boxes. Since the rack is not completely filled with boxes, it does not look bulky.

. Small shelves made of light wood, fixed on the corners, look light and fit perfectly with the design of this very bright balcony. Homemade flowers look good on such shelves.

4181 0 0

How to close the entrance to Narnia: shelves on the balcony

Imagine the picture: in the morning you leisurely go out onto the balcony with a cup of aromatic coffee, a newspaper or your favorite book, sit down in comfortable chair and enjoy a pleasant pastime - nice, isn’t it? For such a thought to become a reality, you need to have a comfortably furnished and uncluttered place. Shelves on the balcony, which will be discussed below, will help you conveniently arrange the necessary items and clear as much space as possible for the recreation area.

Everything you need to know about choosing furniture for your balcony

So that your balcony does not resemble a neglected entrance to Narnia, where you can find everything that has accumulated over the recent years 10, and at the same time could arrange the things necessary for storage, you should definitely think about creating convenient designs for cabinets or shelves. Of course you can buy them at any furniture store Fortunately, the range of such accessories is more than extensive.

But wouldn't it be better to become the owner of an exclusive rack? self made? And I, of course, mean cabinets made by yourself, taking into account all your wishes and tastes.

Varieties

To better understand how to build comfortable shelves or cabinets on the balcony with your own hands, you should first decide on their purpose and placement features. The table below will help you with the first one.

Types of shelves	Examples
1. According to the method of fastening	According to the method of fastening the shelf can be: folding; floor; removable; suspension; fixed.
2. Based on manufacturing materials	A convenient and practical do-it-yourself balcony shelf can be made from: wood; plastic; metal; glass; from combined materials.
3. By appearance	Depending on the appearance, the following types of structures are distinguished: straight; corner; mirrored; open; closed; combined.
4. As intended	The shelves can be used to store: books; shoes; souvenirs; conservation; other accessories.

Selection rules

Deciding on the purpose and appearance of the racks or cabinets is half the battle. It is much more important to pay due attention to some nuances, without which the furniture may not only fail to cope with its direct functions, but also spoil the appearance of the room. To avoid this, you should follow a few simple but effective rules:

1. The material for furniture must be chosen carefully, based on the characteristics of the room. For example, for an open glazed balcony It is better to refuse furniture based on chipboard. It does not withstand temperature changes and humidity well.

1. Do not skimp on fastenings for the structure: choose only the most reliable and durable ones that can withstand the weight of the stored items.
2. The design of the furniture, regardless of whether it is a shelving unit or shelves for flowers on the balcony, must correspond to the overall style of the room. Even the most simple design You can transform and decorate as you wish. Varnished surfaces they look more expensive, and deliberately aged wood will fit perfectly into a shabby chic interior.
3. When choosing how deep to make the shelves on the balcony, take into account the size of the room. Don't forget that in small space large structures will interfere with free movement.

Features of creating shelves

Before you start placing shelves, it is important to carefully consider not only the shape and appearance of the structure, but also the parts on which it will be attached. To store massive or heavy objects, the fastening must be appropriate.

By personal experience I know that metal corners for the frame and anchor bolts– more than reliable parts. Such fastening will be the key to successful and long-term use of furniture.

For small shelves (for flowers or small accessories), special hinges are quite suitable, which will be connected to the wall using dowels or self-tapping screws.

If you don’t want to stop at creating just one or a few shelves, but have set your sights on equipping a whole rack, then the instructions below will help you.

1. Select timber required diameter. Its dimensions directly depend on the expected load on the structure.
2. Be sure to sand and coat the wood protective equipment . You can begin installation only after the boards have completely dried.
3. Saw the timber into horizontal and vertical strips. Vertically, the structure will be equal to the height of the finished rack. I recommend making it equal to the height of the balcony.

The horizontal strips must be equal to the length of the future ones.

1. With the help building level Make marks on the floor, walls and ceiling to mark the dimensions of the shelving unit.

1. Place the beams in a single plane and nail them to the base with dowels.
2. Secure the vertical beam with inside designs. Next, the shelves themselves will be installed on it.
3. Mount the boards selected for shelves on metal corners. This will make the rack more durable.

To better understand the process of assembling a rack with your own hands, you can watch the video in this article.

Bottom line

By placing shelves on the balcony you will get a more comfortable and functional space in which you will enjoy relaxing. Among other things, you will have extra bed for storing sweet little things or useful accessories.