It's no secret that today almost any product for garden plot They are not cheap in stores. So, for example, purchasing various accessories will cost, as they say, “a pretty penny.” And if you make them from scratch, you will spend no less, because you still have to buy the raw materials.

So why not save money and organize homemade projects for the garden with your own hands from what you usually have on hand or is inexpensive? Moreover, everything can be done really beautifully and neatly. And in addition it is also functional.

In this article we will look at the most useful do-it-yourself crafts for the cottage and garden, which are distinguished by their simplicity and originality.

Beautiful “useful things” for the garden

One thing worth noting important point- you need to understand that only a small part of the list of crafts that can be made will be sorted out. It’s just that these options are like a start, a “push” for imagination.

After all, here it is important to understand the very principle of how simple it is to organize everything, and then everything depends only on your imagination. So, let's begin the review.

Pond from an old bathtub

If you make a small reservoir of this type on a site, it will perform several functions simultaneously - we will familiarize ourselves with them in the table below.

Agree, the task is worth implementing. Moreover, for this you only need old bath, which in most cases is available on the site.

A pond is made according to this scheme:

1. We dig a hole with our own hands in the right place, which in its parameters should be slightly larger than the dimensions of the bathtub.

Advice: be as responsible as possible when choosing a location.
It is not advisable to place a pond too close to dining table, For example.
The fact is that various midges, bees, etc. may periodically flock to the water.
And brushing away insects during lunch is not very pleasant, as you understand.

1. We lay several boards at the bottom of the hole– the bathtub will stand on them.
2. We insert the bathtub into the hole and level it. We close its drain hole with a plug. In this case, it is advisable to treat the outer edges of the cork with silicone to prevent water leakage from the container in the future.

1. We cover everything with earth free space between metal and soil.

Well, then all that remains is to decorate the structure. To do this, you can lay out beautiful stones around the perimeter or, for example, plant flowers. In addition, you can create an edging from boards or any wooden sheets or panels that are more or less resistant to moisture.

As for filling the container, you can use both water from the central water supply and natural flows. For example, you can bring the edge of the gutter to the bathtub drainage system houses and the pond will be filled with rainwater.

In principle, such homemade products for the garden can be slightly adjusted - use any tank, barrel, etc. instead of a bathtub.

Now let's look at another very convenient craft.

Pallet bench

Surely at some point you will want to sit in the garden - near artificial pond, For example. And then you will need one like this useful design like a bench.

Purchasing a new product is expensive. It is much easier to make a bench from a pallet - if it is not available, then, as a rule, a considerable amount of it is thrown away near large warehouses and factories.

The bench is made quickly.

1. Make a cross cut on one side of the pallet to the left of the reinforcement bars.

1. On the other side, perform exactly the same operation, only on the other side of the bars.

1. We divide the product into two parts.

1. We insert blocks of bars between the boards, as shown in the figure below. We get the back and seat.

1. We fasten the wood with self-tapping screws at all connecting points.

1. We place the remaining wooden elements under the seat and use them to adjust the height.

As you can see, everything is quite simple. Now you can paint the bench and install other homemade items for the garden and dacha.

Now let's look at a very functional, original and cheap craft.

A hanger is a very necessary element. After all, you can hang not only clothes on it, but also a considerable part of various garden tools.

Of course, the “primitive” version of this design is ordinary nails or self-tapping screws. However, it looks rather unattractive, and besides, the nails tend to gradually loosen inside the holes into which they are driven.

And loosening means that such “hooks” will periodically fall to the ground. We offer a more original and reliable solution - to make a hanger from an old rake.

You only need the metal part, without the wooden handle. Even if such an element is not available in barns, purchasing it at the nearest market is not a problem. The price of the rake is acceptable for everyone.

The hanger is mounted like this:

1. We tie the wire to the two edges of the line on which the teeth are attached. In this case, there should be only one piece of wire. That is, it turns out that the fastener, in fact, resembles how paintings or mirrors are hung on a string.
2. On the wall or anywhere right place We drive a large nail and hang a rake on it.

The hanger is ready - you can hang anything you like on the rake teeth: shovels, caps, etc.

Now let's use old shoes, of which there are usually a lot at the dacha.

Flower pots made from shoes

The ideal option is to have rubber boots, but in principle, regular leather shoes will do.

From such shoes you can make non-standard flower pots, which will fit perfectly into the style of almost any garden.

The workflow here is like this:

1. We nail or screw the boots to the fence or any other suitable plane.
2. We fill each boot with soil.
3. We make several holes in the soles - they are needed to let out excess water.
4. Plant flowers in pots and enjoy appearance inventions.

Pay attention!
Any DIY garden crafts can be “improved” ad infinitum.
The main thing in this matter is to correctly organize the “basic” thought, idea.
And you can decorate the invention with anything and however your heart desires - there are no restrictions.

Remember this simple rule when planning “benefits” for your garden or vegetable garden.

This concludes our review of useful and original crafts for a garden plot and summarize the article.

Conclusion

As you can see, gardener’s homemade products are quite simple, and they can be made from almost anything. We hope that this article will become a catalyst for your ideas and you will be able to decorate your area beautifully. Well, if you want more information on this topic, we recommend watching the video in this article.

Do-it-yourself homemade products for your garden and garden not only perfectly complement your garden plot, but will also help you save a decent amount of money. Today there are many useful devices for the garden, simplifying daily life. Usually gathers at the dacha large number unnecessary things and materials that people do not use in their apartments. it takes up a lot of space. Any summer resident has the opportunity, using his imagination, to make simple homemade items.

Garden tools

When visiting hardware stores, many buyers note that the quality of garden tools does not correspond to their cost. Even an expensive and high-quality shovel is very easy to damage. One option is to personally make some kind of country tool that can perfectly replace a regular bayonet shovel. for example, a garden digger, which is not only very easy to make, but also easy to use. If we compare an ordinary shovel and this country tool, it can be noted that the second one is much easier to dig the ground, and it does not place strong loads on the human spine.

To make a digger for the garden with your own hands, you need those items that often lie and gather dust in the country. You need to have:

• metal sheet 2 mm thick;
• metal pipe 0.5 inches in diameter;
• 2 bolts and 2 nuts;
• 2 engraver washers for the bolts and 2 hours of free time.

You need to cut the metal sheet into 7 pieces, similar to stakes. That is, you should get a stake that is wide on one side and tapering to the other. Then, take a pipe 43 cm long and measure 5 mm from the edge. The following marks are made every 6 cm. Another 5 mm should remain on the other edge of the pipe, which should also be marked. Using grinding disc on a grinder, you need to make cuts in the marked places to the middle of the pipe.

The cut stakes are taken (they will act as legs), inserted into the grooves cut in the pipe and secured by welding. The remaining pipes are then welded into a U-shaped handle and bolted to the workpiece. That's all, the digger is ready for use.

Garden decoration

Don't forget about the opportunity to become a designer own garden at the dacha. After all, you can make not only garden tools, but also much more. And to add some zest country house, you can post a beautiful and original garden path made of stone. Such a path will not only delight its owners, but will also become the latest trend, very popular among summer residents. For a stone path you will need:

• stone used to lay out the path;
• sand;
• gravel and board 25-30 mm thick.

Work should begin with a preliminary measurement of the distance of the future path. To do this, four pegs are driven in and connected in pairs with a guide rope. Afterwards, you need to remove top layer soil, or in other words, dig a trench. When working with a shovel, one should not forget about the level of the trench, since it is better to make it even in depth. This will help not only to use correctly and economically building materials, but will also simplify subsequent work. You need to install boards along the edges of the trench; they will act as sides into which sand and stones are placed.

First of all, gravel should be poured into the bottom of the hole. It will not only perform a shock-absorbing function, but will also provide indispensable assistance with drainage groundwater. Next, the gravel is covered with sand, which should be moistened in advance - this way it will lie more tightly. It is best to make a sand cushion with a thickness of 10 cm, and then you need to level the surface of the embankment with a board. Only after this can stone or paving stones be laid. It is necessary to calculate the thickness of the future path in advance so that you do not have to cut the stone again.

Mosquito traps

The invention fights not mosquitoes, but their larvae. It is suspended from tree branches. Mosquitoes lay their offspring in this device, which prevents the newly born mosquitoes from leaving it. For more effective fight with bloodsuckers you should make as many of these traps as possible. But even the use of this gadget cannot provide 100% protection from mosquito bites.

One of the most simple ways- This is to use an ordinary plastic bottle as a trap. Needs to be cut top part with the neck and insert it into bottom part so that the neck does not touch the bottom. Next, you should prepare a special solution that will attract mosquitoes. To do this you will need 15 g of yeast, 45 g of sugar and warm water. All 3 components need to be mixed and the resulting solution poured into the trap. Then, the bottle must be darkened. To do this, you can use a dark cloth or thick paper. This trap can attract not only mosquitoes, but also cockroaches. Therefore, the owners of a house in the village have the opportunity to use it in their living space.

These were just 3 of the most interesting and easily made devices for the garden and garden. Do not forget that a person can create something more useful and unique from available materials, you just need to give freedom to your imagination.

A dacha is a place for resting the soul and healing the body. Far from the bustle of the city, where the air is clean, it’s so nice to have an active time and grow an excellent harvest. And having worked enough, have a good rest!

But to relax in comfort, you need to work a little to create beautiful, useful and comfortable things. Do-it-yourself homemade products for the garden and garden - cheap, reliable and cheerful!

Furniture made from wooden pallets (pallets)

After the construction of the house there is a lot left construction waste, which may come in handy! Brick and wall blocks delivered on pallets. They are returnable packaging, but I don’t want to bother with this issue. With a minimum of effort you can make something original wooden furniture for the dacha!

Look at this stylish coffee table for the living room. Do you recognize? This is an ordinary pallet! Making such an interior item is not difficult. Take coarse sandpaper and sand the surface of the boards from which the container is made. Then you will need finer sandpaper to make the surface smooth. After sanding, carefully wipe off the fine dust consisting of particles of removed wood.

Paint yours new table oil, acrylic or other wood paint. If the pallet was made from decent boards and you like the natural texture of wood, then it is better to varnish the table. For convenience, you can screw small wheels on the bottom.

More complex products are also made from this container - sofas, chests of drawers, cabinets. Check out some photos for inspiration.

Agree, this is a chic and stylish set! If you make your own soft seats, sew ribbons of the same fabric to them from the bottom to tie them to the frame. Otherwise they will move.

The bed and its large headboard with shelves are also made from pallets. A good orthopedic mattress will allow you to sleep well even on such an original foundation.

Such a recreation area under open air V oriental style will not leave anyone indifferent.

Swing

Do you have children in your family or do you have guests with children? Then you can’t do without a swing! To avoid spending a lot of money, you can use unnecessary things.

For example, you can make an excellent swing seat from an old chair in a matter of minutes by sawing off the legs. And to make it beautiful, paint it with fresh paint.

By the way, not only children love to swing. Adults also enjoy it. Look at this version of a swing made from a rattan chair, the legs of which have become unusable. Soft pillows delicate flowers, ribbons, lace fabric - everything to create a romantic atmosphere.

If there is any in the garden big trees, you can hang such a structure on a thick branch, then you don’t need to build complex fastenings, a strong rope will be enough.

Second life of an old bath

There are many possible options. Here are some of them.

Flower garden. One of the easiest ways to use up an unwanted bathtub. It is enough to make good drainage at its bottom from broken bricks or expanded clay, add a nutrient substrate and plant the plants.

Water. The easiest option is to bury the bathtub in the ground and pour water into it. But you can decorate it in such a way that no one will guess what you built your pond from at the dacha. Small fountain natural stone for framing, lighting and favorite plants will help create a unique relaxation corner on the site.

Furniture. Yes! It’s hard to believe, but the bathtub makes excellent furniture - sofas and armchairs. And don’t worry if your bathtub is cast iron. Using a grinder, you can cut out part of the side to make a sofa or armchair.

Flower beds

Flower beds can be decorated in a very original way.

Vertical gardening with colorful rubber boots. Make holes in their soles to drain excess water and arrange expanded clay drainage. Fill your shoes with soil and plant the plants. Remember that any container that is not buried in the ground quickly heats up in the sun, and the soil in it dries out. Therefore, on hot days, water your green pets at least 1-2 times a day.

You can also use other shoes.

If there is an extremely unattractive stump from an old tree on your property that you cannot uproot, do not be discouraged. It makes a great raised flower bed.

Some gardeners love their stumps decorated with plants so much that they even coat them with varnish to slow down the process of destruction.

Instead of a stump, a picturesque log can serve as a base.

Flower beds can be arranged in various used things - suitcases, bags, furniture, tires and even in a car!

Try to make it elevated warm bed, framing it neatly wooden frame, stone or brick.

From plastic bottles

An excellent material for DIY projects in the country and in the garden are plastic bottles. They can perform useful features or be decorative element for landscape decoration.

Spray Bottle – indispensable assistant in the garden. Make small holes in the container, place the neck on the pipe or hose and secure it. All that remains is to open the tap to let the water flow.

Using a bottle, you can organize root watering for plants. Make holes in it. To prevent soil from getting into the holes, put old polyamide tights on the container. Dig the bottle so that the neck remains above the ground. You will pour water there from a hose or it will fill itself when it rains.

This method of watering will not incur financial expenses at all, but will bring tangible benefits. Water will flow from the bottle gradually in small portions, without getting onto the above-ground parts of the plants. And this is very important for many fruit and ornamental green pets: tomatoes, cucumbers, zucchini...

After filling the bottles with water, you can safely go to the city for a week, and the plants will not suffer from drought. The water still has time to warm up before it reaches the roots.

Frame flower beds and beds with glass or plastic bottles.

It looks neat and has practical benefits. If you bury the bottles in the ground, they will become a barrier to the spread of the roots of perennial weeds. And if most of the container remains on top, then you can pour soil inside the perimeter and the flowerbed or bed will be slightly raised. It will be easier to care for her.

From plastic bottles Durable, wear-resistant panicles are manufactured. They look attractive thanks to their bright colors.

DIY crafts for the garden and garden with your own hands bring special comfort to your personal green corner. They are pleasing to the eye, serve as furniture or are assistants in the struggle for the harvest. They also protect you from all kinds of adversity. After all, it is known that things made with your own hands have special power.

Let your dacha be hospitable at any time of the year!

Interesting homemade products for the dacha are waiting for you in this article. You will learn how to make a lawn mower from an old washing machine, make a sink, a country shower, and a dryer from scrap materials.

Useful homemade products for the garden - do-it-yourself washing

Not everyone has the financial opportunity to buy a Karcher car. If you can't buy it, then why not invent it? Homemade sink will allow you to do without running water, reduce water consumption and thoroughly wash your car, fence, garden path or other objects.

Here's what you'll need for this homemade garden project:

• plastic canister with a capacity of 5–20 l;
• hose connector kit;
• automobile nipple;
• a piece of hose;
• silicone sealant;
• sharp knife;
• compressor or car pump;
• watering gun.

Take a set of hose attachments, which includes 2 connectors, a 3/4 threaded fitting, and a 1/2 adapter.

Here is the principle of operation of such a homemade product for the dacha: you connect the gun to a hose, attach this device to the bottom of the canister. A nipple will be built into its neck.

Fill the container with water, but not to the top. Then screw on the lid and pump air inside. Pressure will be created here, and the water will flow well when you pull the trigger of the gun. Here's how to assemble such a mini-sink.

Using the tip of a knife, carefully cut a hole in the lid. It should be slightly smaller than the diameter of the nipple leg. Also cut a circle required diameter at the bottom of the side of the canister.

Insert the nipple into the cover.

Now, helping yourself with the wire, place the coupling in the hole intended for it. Apply silicone sealant to secure the connection between the coupling and the canister.

It is necessary to tighten the lid and carry out other work only after the sealant has completely hardened. Then you will connect one end of the hose to the water gun and the other to the canister.

Pour water into the container, but not to the top, so that there is room for pumping air. But do not pump too much, so that the canister does not deform or burst under pressure. Look at how the fitting should be tightened and the connectors installed.

If everything is done correctly, then when you press the trigger of the water pistol, the water will shoot out in a good stream. You can adjust the pressure by twisting the tip of the gun.

At the dacha you can hardly do without a shower. Try to make something unusual rather than tropical, then you will be able to enjoy water treatments even more.

How to make a rain shower from scrap materials for your summer house?

If you have just recently purchased a plot of land and do not yet have a washing room, then you can take a shower right on the street, enclosing a small area near the fence with a curtain. To make such a rain shower, you will need very few components, these are:

• bracket;
• wire;
• flexible hose;
• metal beer can;
• hose adapter;
• awl;
• nails.

Nail the metal bracket onto wooden fence so that the device is at the desired height. Screw the adapter to the end of the hose and secure it to the slot of the beer can. The joint can be treated with sealant. Using an awl, make many small punctures in the jar.

Tie the top of the hose with wire to the bracket, and attach the other end to the water supply or pump. When you lower the pump into a barrel of heated water, you will be able to take pleasant water procedures.

You can also make a rain shower head using a disc container as it. In its center you need to fix a plastic adapter that is attached to the shower hose, and the central axis of the discs needs to be removed. Using an awl, make holes at the top of the lid. Seal all fasteners well with sealant. This nozzle is held on a bracket using a thick wire or on a rigid pipe.

If you want to make a rain shower, then you can use plastic pipes for this.

You need to supply water to them, first make many small holes with a soldering iron, and then enjoy the flowing drops. Children really like these water treatments.

But do not forget to first check the water in the container from which it will be poured into the shower; it must warm up in the sun.

And to make a stationary shower, you need to first pour water into a tank or barrel, which will be located under the roof or on the roof of the building. On a warm summer day, the water here warms up well, and you can wash yourself to your heart's content. To be able to do this in cooler weather, then you need to provide a heating system in such containers.

DIY country shower

Before installing it, you need to make a shower stall. If possible, you can make it out of wood, installing this small structure on the base. Put wooden door or limit yourself to a shower curtain like this.

There are more simple options. If you have oilskin fabric, then use it.

Another option is to purchase impregnated fabric or use an old awning or tent.

If you made a fence from corrugated sheets and you have some materials left, then try making a shower for your dacha out of them. Metal pipes you need to dig in according to the markings and fill them with concrete. When it dries, cut sheets of corrugated sheets are welded to the racks. One of them will become the roof.

If you don't have enough wooden boards, then implement the option shown in the next photo on the right. And on the left is a shower that is made like a fence. So the materials for it will cost almost free.

When the shower is ready, you can install a water container on it. To make it warm up better, you can make a kind of coil out of metal or a hose. Then the water will warm up more actively.

These and other homemade products for the garden allow you to make the most of your existing containers.

To be able to receive warm water even when it is not heated by the sun, use electric heating. To do this you can plastic barrel place vertically or horizontally. Then it will be necessary to install a shadow on one side, and on the other? water fill fitting. Make an overflow hole so that excess liquid flows out and you can see that the container is already full.

Now all that remains is to install the tank. This is usually done using a shower roof. You can put a flat tank here, made of iron or plastic. You can also make a canister for the soul from metal or iron barrel. If you need to heat water, then a heating element is installed in the barrel.

Check out other examples of what you can do with personal plot with your own hands.

Interesting DIY crafts for your garden

Gardening tools are very necessary for working on the ground. Often, the store sells not very high-quality sets. After a short period of use, the handle of the shovel breaks off, or the teeth of the hoe become bent. Therefore, if possible, try to make your own tools.

Take:

• stalk;
• fragment of a water pipe;
• scrap from a two-handed saw;
• screws;
• screws;
• fragment profile pipe cross section 3 cm.

Using a grinder, cut a piece of pipe. Taking a lever tool, you need to cut out a section of pipe, bend the sector, and in the place where the handle will be, you need to work with a hammer to give the future chopper the desired shape.

To make the blade, take a scrap of a two-handed saw and draw the outline of the future hoe. Punch two holes.

At the same distance and the same diameter, you need to make 2 holes on the chopper itself, and then cut out a fragment from a two-handed saw.

Drill these holes using a drill and a bit designed for metal work. Connect these two parts using rivets, which are screws.

Now drill a hole in the top of the hoe so you can attach the handle here.

Make also a scoop, which is very interesting to work in the beds. Then such homemade products for the dacha will allow you to acquire a very durable set of tools.

Saw off the required piece of the cutting with a grinder and begin to straighten part of it with a chisel.

Then, using lever tools to help yourself, straighten this part almost completely.

All that remains is to work with the hammer so that the blade of the scoop takes on the desired shape. Using a felt-tip pen, draw the outline of its working part and cut it out with a grinder.

With the help abrasive wheel clean the edges of the shovel and make them smoother. Now sand the tool with a flap wheel. This is how shiny this shovel will be.

Also drill a hole in it for the handle, then insert it and secure it with a screw.

Cover the handles of both instruments with an antiseptic and then with varnish. Now you can use the tools for their intended purpose. If you want, use the same principle to make a ripper for beds.

It’s very exciting to create things like this for your garden with your own hands. Maybe after you've made the tools, you'll want to make a device that you can use to dry the part harvested. See how one gardener did it.

How to make a dryer for fruits and vegetables?

Look at what materials you need to take for this:

• sheet metal;
• square pipes;
• locking mechanism;
• polycarbonate sheet;
• self-tapping screws;
• 2 door hinges.

Here are the tools you need to equip yourself with:

• grinder;
• welding machine;
• drill;
• stationery knife;
• tape measure and marker;
• metal scissors;
• with a hacksaw.

First you need to make the base for the drying cabinet. Make a frame from square pipes. Horizontal and vertical posts are sawn off so that the edges are smooth. And the ends on the connecting elements should be beveled.

The door here will be metal. To make it, cut from iron pipe 4 fragments and weld them into a rectangle. Then you need to sheathe this base with metal using screws with nuts and self-tapping screws. If possible, weld a steel sheet. To make a tray holder, attach with reverse side wooden frame frame. Take self-tapping screws for this. IN in this case, on each side there are 4 wooden blocks for 4 baking trays.

An absorber is installed in the dryer. Take sheets of metal and paint it black. Use heat-resistant paint. When it is dry, place this blank on the bottom of the dryer.

For the absorber, take a thick aluminum or copper sheet, or in extreme cases, steel. These materials conduct heat well.

Now you need to sheathe the outside of the dryer, make the roof transparent, made of polycarbonate. Then they will be able to penetrate here well sun rays. Glass can also be used. Cover the ventilation windows with a mosquito net to prevent insects from flying in.

Attach hinges and a locking mechanism to the door. Secure the door in place. Look what a wonderful, beautiful and spacious dryer it turned out to be.

All that remains is to make the baking sheets. They must allow air to pass through. First, knock together the frames from the bars, and then attach the metal mesh to them.

Now you can cut fruit and watch how your device will work. Place a thermometer in the dryer to monitor the temperature. It should be between 50–55°C. At lower temperatures, close bottom holes, putting a rag here.

In such a homemade dryer you can dry not only fruits, but also vegetables, herbs, fish, meat, and roots.

If this design diagram for such a device seemed complicated to you, then you can make a dryer from metal barrel. A hole for the door is cut out in it, and metal mesh racks are inserted inside.

To prevent water from flowing in here and for better ventilation, a roof like this is installed on top.

You can upgrade this fixture by installing a fan and an electric heater inside.

If you want to make your own lawn mower, then this is also possible.

Turn the old one into it washing machine, for example, like this one.

And if you still have an old bedside table, then you can turn it into a platform for a future almost self-propelled device. But you only need the door from the bedside table.

Drill holes in the center of the motor shaft. cutting knife make it from an old two-handed saw. It is necessary to saw off it to the size of the desired shape, cut out a recess inside.

Attach two wooden pickets that will become the handles of the mower. Don't forget to secure the motor and extension cord to it. Now you can test such an interesting unit.

If you are interested in other homemade products for the garden, then you will find it useful to watch the following video.

Many interesting ideas is waiting for you in the first video.

And with cool homemade products from plastic pipes you can get acquainted if you watch the second story.

For many, the private sector is associated with difficult permanent job. Plant a vegetable garden, monitor the growth of plants, and harvest. All this, of course, needs to be done. But if you organize the whole process correctly, then the work will be a joy. And there will still be a lot of free time for relaxation. And homemade products for the garden and dacha, made with your own hands, will help with this. Someone will object that everything can be bought ready-made in the store. That's true. But, firstly, there is not enough money to buy everything. And secondly, the very process of making something useful from scrap materials can bring a lot of positive emotions.

Russian people have always been resourceful and inventive. And a huge number of hand-made homemade products for the garden and garden, photos of which can be found in our article, are proof of this. We will offer for consideration only a few options that will be useful in any area.

Flowerbed box

Many gardeners in lately They prefer flower beds located in boxes. They are raised above ground level and fenced on all sides. This makes the maintenance process easier, and the garden bed looks more attractive and interesting. It is possible (or even recommended) to use such designs on meager nutrients soils.

Homemade products for the garden involve the use of scrap materials. Therefore, to construct the box, you can use boards left over, for example, from building a house. If you don't have them, you'll have to purchase them at the store. A box of arbitrary dimensions is constructed from them. The dimensions will depend on the size of the plot, its style and the plant that is planned to be planted there. The height of the side is made approximately to the knee, so that the layer fertile soil was thicker.

It is fixed to the bottom of the manufactured box metal mesh with a small cell. It will provide protection against the penetration of rodents and moles. If there are none on the site, then you can do without a grid. You can easily make a small greenhouse from a box bed. Its height is selected taking into account the plants planted there.

Drip irrigation

Homemade products for the garden will simplify such a difficult process as watering plants. You can make a system drip irrigation. To do this, you will need a large barrel (metal or plastic), a hose, capillaries (you can make holes in the hose at a certain interval) and various connections (tees, clamps, etc.).

The barrel is raised approximately 1.5-2 m from the ground. To do this from metal corners You can weld a special stand. Thanks to this, there will be stable pressure in the system. A main hose comes from the barrel. A filter must be installed on it so that debris does not clog the system. The capillaries are fed from the main hose.

DIY sprinkler

Homemade products for the garden and garden will allow you to create something necessary and useful on your site from available tools and materials. For example, from old plastic bottles, which are always thrown away, you can make a sprinkler for your garden and vegetable garden. It will allow you to process and water plants of different heights. A sprayer is attached to the watering hose. The same spray nozzle is screwed onto a long stick (the longer the better). The lever is secured with a thread while pressed.

In a 1.5 liter bottle, a hole is made in the neck with a hot nail. A bolt is inserted into the hole and outside secured with a nut. The bolt must be drilled through with a drill. A hose is put on it and secured with a clamp. After applying pressure to the system, the nozzle spins and water is sprayed.

Tire compost bin

Old tires from passenger cars are one of the most popular and available materials for making homemade items for the garden. You can even make them compost pit. You only need 4 of them.

One of the tires, which will serve as a base, is cut. One side panel is cut off from it. From the rest, two sidewalls are cut off to form rings. Next, you just need to install the tires on top of each other in the designated area.

Bench

After all the work in the garden, you can relax. And on this score you can also choose suitable option handmade crafts for the garden and garden. With a small set of tools and materials, you can make an attractive, streamlined bench. It will become a place where you can relax and unwind.

Materials you will need:

• A sheet of plywood (preferably pine) measuring 90 x 90 cm and 1.6 cm thick.
• There are 7 slats made of the same wood (2 cm thick, 9.4 cm wide and 140 cm long).
• Boards 2 x 6.9 cm and 100 cm long, 3 pcs.
• Boards 2 x 6.9 cm and 140 cm long, 9 pcs.

The parts will be held together with 0.5 x 5 cm self-tapping screws. In addition, glue will be useful for joining wooden elements, wood varnish, turpentine.

The plywood sheet is cut into three parts. A template is drawn on them for cutting out the side panels and the central crossbar. The shape is cut out with a jigsaw. On the back there are 3 recesses for slats that will hold the structure.

Homemade products for the garden will help make your country life more pleasant and easier.