After the end of the washing cycle, poor-quality washed dishes were found behind the hopper door - with plaque, food residues or soap suds? Familiar situation? Why did this happen and why does the dishwasher wash dishes poorly? The reasons for this may be simple to the point of banality, but a serious breakdown is not ruled out. Let's take a look at everything in detail.

PMM does not launder: incorrect operation

If the dishwasher has become poorly washed, first of all it is necessary to exclude factors that are not related to the breakdown of parts and systems. The reason for this may be a violation of the rules of use:

• There is food on the plates. If you are accustomed to saving dishes all day long and do not brush off the leftover food from them, then you can forget about high-quality and efficient washing forever. The manufacturer warns about this in the user manual - take a look at it if you don't believe it.

• Wrong program. If you have loaded a large batch of heavily soiled dishes and have selected the short or economy setting, don't be surprised if the machine doesn't clean well. These cycles are designed for washing lightly soiled dishes and utensils, as well as for refreshing dishes. In other cases, you need to choose intensive and high-temperature cycles.
• Bunker overload. The machine does not wash the plates if the baskets are crammed full of them. Unload the boxes, observing the distance between the dishes - perhaps this is the reason.

• Detergents. Another reason why the dishwasher stopped washing is the wrong selection of detergents or their required volume. Adjust powder dose or detergent, add a rinse aid or completely replace the means available in the arsenal.

If none of the above factors came true and you still end up with dirty or soapy dishes, you need to take the issue more seriously. You will have to understand the structure of the machine or contact the master. Although this last resort- most problems at an early stage can be solved without contacting a service center.

Other Issues Requiring Immediate Resolution

The reasons listed below are often not related to a violation of the terms of use, or are related, but indirectly:

• limescale or simply - scale. it main enemy technology that works with hot water. It's all to blame - impurities that make tap water tough. Often, even special softeners and regenerating salt do not soften the impact of water on the inside of the dishwasher. The worst thing is that the raid is not visible - it is inside the PMM and slowly causes the car to break down. If scale appears on the impellers (sprinklers), then the water is sprayed much worse, which affects the efficiency of washing.

• blockages. It is difficult to fully remove all the remnants of food, napkins and other things from the plates - in this case they will have to be washed, but why then PMM? All this rubbish is collected by filters, and also falls on sprinklers. Therefore, if the dishes are slippery and unwashed after a dishwasher, check the filters. It is advisable to clean them after each cycle - this recommendation is even spelled out by manufacturers in the instructions.

If the amount of detergent is chosen correctly, you have thoroughly cleaned the utensils of dirt and cleaned all the filters, but the washing is still bad, it looks like a breakdown. What to do: how to detect and fix the failure? More on this later.

Possible problems: how to fix?

Consider the possible malfunctions in which the PMM may not be able to cope 100% with its main function:

Heating element failure

Each PMM is equipped with a device that heats water to the required temperature. Thermoelectric heater (TEH) is most prone to scale accumulation on its surface. The longer the overgrown heating element works, the sooner it will burn out. After the heater fails, the machine ceases to cope with the main function - and the quality of washing drops to a minimum, since it is difficult to wash something in cold water. In this situation, disassembly of the machine body is required and complete replacement heater with a new part.

Breakdown of the circulation pump

The pump that pumps water into the dishwasher, when it fails, blocks the water supply for the washing process, hence the dirty, cloudy dishes. The way out of the situation is to replace the part with a new original.

Sprinkler wheel problems

The impeller is a mechanism that rotates the rocker with sprinklers. In case of failure, the rotation stops (both one impeller and two) and the dishes are not washed well. The way out is to replace the impeller.

Temperature sensor failure

The temperature sensor (thermal relay) is used to measure the water temperature. The information received by the sensor is fed to the electronic module, which commands the heater to start heating. If the data is incorrect (or not supplied at all), the heating element does not start and the washing takes place in cold water - hence its low quality. The sensor needs to be replaced with a new one.

Malfunction of the control module

The task of the software board is to send commands to all PMM nodes. So, the module controls heating, draining and other processes. In the event of a breakdown, the board does not work correctly, causing a malfunction of the machine. In this case, the module must be flashed or replaced with a new one.

Turbidity sensor failure

This error is only for expensive cars, in the design of which a sensor is provided that controls the turbidity of the water. It sends a signal to the board that if the water is not yet clean enough, the cycle should continue. If the sensor fails, the module does not receive information about the state of the liquid and the wash cycle does not work correctly. It will help to replace the sensor with a new one.

Dishwasher is a wonderful assistant in the kitchen, it saves you from many hours of work near the sink, delighting you with the radiance of dishes. For some, the dishwasher has been working fine for years and does not cause problems, while others, after some time, begin to complain that the machine has become worse at washing dishes. What happens to the equipment, why the quality of washing is reduced, how to fix the problem if it occurs. Let's try to deal with these problems.

Causes of Poor Dishwashing

The quality of washing dishes depends on many factors, which for some reason some of us simply neglect, saying that the dishwasher washes everything well anyway. However, at first the machine will indeed show excellent result. But gradually from time to time, you will notice the remains of food on the dishes, streaks or white coating. The reasons for this may be the following:

• user errors when operating the machine;
• untimely cleaning of the dishwasher and its parts;
• refusal to use special detergents or their incorrect dosage.

Let's take a closer look at these reasons, and also figure out what to do to make the car wash better.

Didn't clean the dishwasher

A dishwasher, like any other appliance in the kitchen, requires constant care. And if this care is not carried out, then it will simply cease to function. The dishwasher should be cleaned regularly:

• filter from food debris;
• bulk coarse filter;
• rocker arms (water sprinklers) from blockages
• ten from scale;
• raid tank.

The filter located at the bottom of the dishwasher, which is a fine mesh, should be washed at least once a week. To do this is very simple, the main thing is not to forget. The coarse filter, standing at the entrance to the dishwasher, to which the inlet hose is screwed, also needs to be cleaned, although not so often. Large particles of impurities may be present in the water, especially after cleaning the pipes in the house. If water goes through the filter mesh, then over time the particles will clog it, the pressure of the water supply to the machine will be weaker. This will lead to the fact that the machine will become worse at washing dishes.

Not only the filter, but also the nozzles (holes) in the rocker arms can become clogged with food debris. If the machine is not completely cleaned in time, lime deposits can form inside the holes. All this will lead to a decrease in the pressure of the water supply, the dishes may not be washed well. To clean the rocker arms, it is necessary to run a dry wash (without dishes) with . Such a wash will also save the heating element from scale, and the car tank from plaque, grease and other contaminants.

Note! Wash the dishwasher with detergent at least once every six months, regardless of how often the machine is used.

After each wash, you need to check if the tank of the machine is dirty, if there are food residues under the door, this happens in some models of Bosch dishwashers. And be sure to wipe everything with a dry cloth.

Operating errors

If the dishwasher does not wash well, then the reasons for this may be typical user errors, these include:

• improper stacking of dishes in baskets;
• too many dishes are loaded;
• wrong mode selected.

Arranging dirty dishes in baskets is one of the instructions. Machine manufacturers such as Bosch, Siemens, Electrolux pay Special attention this issue. Therefore, before folding the dishes, you need to read at least once how best to do it.

The most important rule is to place the dishes so that the water flows down and does not remain in the dishes themselves, there must be a gap between the objects to provide water access.

Make sure that the items in the lower basket do not block the access of water to the items in the upper basket. Also, the dishes should not interfere with the free rotation of the sprinklers and the compartments with detergents. If during washing the compartment with the tablet does not open, then the product will not get into the water, the dishes will remain dirty. Loading dishes is directly related to its quantity. The more dishes, the more densely they are arranged, the more difficult it is for water to get into hard-to-reach areas of plates, cups and other objects. Therefore, do not be surprised that the dishes will have to be washed again.

Another common user error is the discrepancy between the selected mode and the degree of soiling of dishes. Many people run a quick wash to save time. However, in this mode, the water temperature, as a rule, does not exceed 45-50 0 C. If you wash plates with dried food, pots and other items in this mode, then most likely they will not be washed. About what dishes to wash and in what mode is also very well described in the instructions.

Important! Do not forget to clean the dishes from food debris, this will improve the quality of washing, the filter will clog less.

Not using dishwasher detergent

The next group of reasons why Bosch dishwasher, Hansa or any other has become worse at washing dishes, associated with detergents. The most common phenomenon is the change of dishwashing detergent, for example, powder or tablets, as well as their fake. But this problem is easily solved if you wash the dishes again with the product that you used before, or change it to some other option until you find something acceptable and effective.

But if the detergent did not change, and the dishes began to wash worse, then the wrong dosage may be the cause. Here are the possible problems:

If you refuse to use special salt over time, you can also notice that the dishwasher has become worse to wash. Salt is needed to restore the ion exchanger's ability to soften hard water. If the machine is operated for a long time without salt, and the water in the region is hard, then the ion exchanger becomes clogged and may even fail. Therefore, do not neglect this tool.

Important! With very hard water, 3 in 1 complex tablets will not replace salt, it will still need to be poured into the machine.

So, if your Bosch, Electrolux, Candy brand car, no matter what it is, began to wash dishes poorly, then pay attention, first of all, to the conditions of its operation and the rules prescribed in the instructions. Most of the time, rules are written to be followed. We hope our article helped you figure out what to do with such a problem.

It is unlikely that there will be many people who love to wash dishes. Many housewives have long experienced first hand how important it is to have a dishwasher in the house. This wonderful assistant is able to do wonderful things: save you from hours of standing near the sink and please you with clean, washed dishes to a shine. High-quality models of dishwashers can work flawlessly long years. But sometimes, after some time, the housewives begin to notice that the dishwasher does not wash the dishes well, stains, grease stains, plaque, or even food remains are visible on it.

Why does such an incident happen? What to do? How to help your beloved assistant, fix the problem and improve the quality of washing?

Of course, the quality of washing cups and plates in the dishwasher depends on many factors. But all of them can be divided into four main groups:

• incorrect operation;
• blockage or scaling;
• the use of low-quality detergents or errors in dosage;
• dishwasher malfunction.

Let's take a closer look at these causes and think about how to eliminate their consequences.

Read the instructions

If your dishwasher does not wash dishes well, then first pay attention to how exactly you operate the unit. Common Mistakes that hostesses allow when using can become such as:

• excess of the volume of loaded dishes, in other words - there are too many of them;
• violation of the operating mode - the program is incorrectly set;
• the crockery is placed incorrectly in the crate.

Before putting dirty cups and plates into the basket, you should at least once look at the instructions for how to do it correctly. This is especially true for models of the brands Electrolux or Bosch. The location of the dishes should be such that they do not interfere with the rotation of the spray arm and do not block access to where the detergent is located. You also need to ensure that the utensils located below do not block the access of water to those items that are at the top.

Now the next step. As you understand, the more dishes loaded into the dishwasher, the less water and powder per unit volume. If you load the machine too tightly, there will simply be nowhere for water and powder to turn around - you will have to wash everything again.

The next mistake is the choice of an operating mode that does not correspond to the type of pollution. If you put a greasy pan in the dishwasher and turn on the glass mode, the pan will remain dirty, because you need to wash it differently. In the “quick wash” mode, which assumes a water temperature of about 45˚, you simply cannot wash the grease off pots and dishes. All options and types of downloads, as well as the operating modes suitable for them, are also described in detail in the instructions.

Breakdowns and blockages in the dishwasher

If stains on the dishes after the dishwasher have become a permanent phenomenon, then most likely you need to clean them. Yes, just like any other Appliances, the dishwasher can become dirty and work worse from this. In any washing unit, regardless of type and model, there are several places where you should look regularly:

• mesh filter for food debris;
• bulk filter;
• sprinklers;
• TEN and tank.

First of all, use the instruction manual and find a filter in your dishwasher to catch food particles. If the dishwasher has become poorly washed, most likely it is dirty. Usually the filter is located at the bottom of the unit and is a fine mesh. Clean and wash it at least once every 10 days.

If the water in your apartment is not too clean and soft, then be sure to regularly change the core of the coarse filter, which is located at the entrance to the dishwasher. If this filter is clogged, then the water pressure entering the unit will be significantly weakened. Weak pressure water is another reason why the machine does not wash dishes well and plaque remains on it.

Nozzles, heating elements and your assistant's tank may suffer from the presence of limescale, in other words, scale. To prevent this, get special agent anti-calc, according to the type of your dishwasher. At least once a month, run it in "idle" mode. Use a product that dissolves and removes scale.

So that the inside of the dishwasher does not rust and does not become an additional source of problems, wipe the inside with a dry soft cloth after completion of work.

If you notice that the dishwasher does not wash dishes well, take a closer look - the reason may be hidden in the use of low-quality powder or other detergent. If you recently changed your detergent and began to notice plaque and streaks on mugs and plates - do not hesitate, this is the reason. Fixing trouble is easy - buy suitable remedy and your dishwasher will wash better.

If you use the same product as before, and the machine began to wash dishes worse, then perhaps the matter is different:

• on like clean dishes a gray coating is visible and stains have appeared - there is clearly not enough rinse aid in the water, you need to adjust its consumption;
• the machine launders traces of tea, coffee and lipstick poorly - the detergent contains little bleach; to improve the result, purchase the appropriate additives or change the detergent;
• for some reason, white streaks remain on the pans - the salt lid is not closed tightly; salt powder gets inside the machine and a white coating is obtained;
• plastic dishes remain greasy - there is not enough fat-dissolving substance; change the detergent or add additives by hand.

The reason for the malfunction of the dishwasher may be the use of a product intended for other purposes. It may seem to you that everything has remained the same, but over time, the performance of the unit will begin to deteriorate, and soon it will stop washing dishes altogether.

If your dishwasher has begun to leave a greasy coating and streaks on the plates, remember the last time you used special salt. The reason may lie in the fact that due to excessively hard water, the ion exchanger failed and detergents began to dissolve poorly in the liquid. Reapply the salt and the dishwasher will get better over time.

Obvious damage to the dishwasher

Electric heater burnt out

Since this element has constant contact with water, it is very susceptible to scale buildup. With long-term operation of such a “coked” heating element, it simply burns out. If this happens, then the water in the dishwasher simply does not heat up, but to wash off grease and dirt cold water impossible.

Sprinkler impeller not working

Each machine has a special mechanism that, when rotated, sprays water into different sides. This is done so that streams of water can get into the most hard-to-reach places. If this mechanism does not work, water does not reach everywhere and the dishes remain unwashed.

Broken water turbidity sensor

Such a device is mainly only in new models of dishwashers. The sensor transmits data on the quality of the water to the control module: if it is cloudy, the washing should be continued, if it is clean, the process is completed. When the appliance is faulty, the “brain” of the machine is left without information and the dishwasher does not understand how to properly complete the cycle.

Broken recirculation pump

This device is responsible for the supply of water. If it breaks down, the unit will not work at all, since water does not enter it.

Thermal relay burned out (temperature sensor)

This node in the dishwasher measures the temperature of the water and feeds the data to the program control module. Depending on the data received, the "brain" instructs the heating element to heat the water. If there is no signal, the water will remain cold and the dishes dirty.

Error in the operation of the control module

This is the most serious damage. Simply put, your home assistant went blind and deaf at the same time. This part of the unit controls all processes: it gives commands about the collection and discharge of water, the supply of detergent, the degree of spray, and so on. If the control module is knocked down or broken, the dishwasher will definitely work poorly or stop altogether.

All these faults are very serious. To eliminate them, you will most likely have to invite a master or contact a repair shop.

The reasons why the dishwasher does not wash dishes well, which affects this factor, are considered in detail. Listed possible breakdowns techniques leading to the presented problem.

Common Causes

Most housewives do not think about correct operation technology, which causes problems in the form of poorly washed dishes. If the dishwasher does not wash the dishes well, the following main reasons can be identified, the elimination of which will help to cope with the trouble that has arisen:

• hostess errors in operation;
• wrong;
• lack of timely cleaning of equipment;
• failure of a particular part or system of the machine.

To identify the cause of poor washing, you should carefully consider each factor that affects the poor quality of the procedure.

Untimely cleaning of parts

Failure to clean dishwasher parts on time is the most common dishwashing problem. Here you should check each part separately for condition and appearance:

If you find that the dishwasher has become poorly washed, be sure to carry out a high-quality cleaning of the parts. If the situation repeats, pay attention to other reasons.

Use of poor quality cleaning products

Poor cleaning may be due to the use of ineffective cleaning products or the erroneous purchase of a fake brand. If the reason lies in this, then you will come across dirty metal dishes - pots and pans, due to their heavy pollution won't wash off, stay greasy.

In the question presented, you may encounter the following problems:

• There are stains on the dishes - the reason is not enough rinse aid. The solution to the problem is presented in the form of regulating the supply of funds - it is necessary to increase the pressure, slightly, so as not to provoke its difficult flushing.
• White smudges remain on the dishes - this is due to the ingress of salt into the tank. Check if the compartment cover is closed properly.
• There are traces of tea, coffee or lipstick on the cups, which means that there is no bleach in the product used.
• Plastic dishes are poorly washed - for it, a special component is added to cleaning products that allows you to wash plastic items without streaks. If the quality of washing is not pleasing, it means that there is no special substance in the composition of the product used.
• The dishwasher does not wash off dirt and cleaning agent well - it is appropriate to make an unconditional argument for using an inappropriate composition, which is often simply not intended for this technique.

The solution to the problem related to the presented group of reasons is to change. In most cases, housewives are faced with similar problems immediately after acquiring the composition of a new advertised brand.

Errors in operation

The dishwasher does not wash dishes well even if the equipment itself is used improperly. AT this case The following problems and solutions can be identified:

To eliminate problems related to the presented category, you should re-read the instruction manual for your dishwasher. Different brands and models differ in equipment, which means that their use entails compliance with certain recommendations.

Possible breakdowns

If the dishwasher suddenly began to wash dishes poorly, the cause of the problem may be hiding in a serious breakdown that needs to be repaired in a timely manner. To figure out which part has ceased to function properly, the following instruction will help:

• The heating element burned out - this is a special electric heater that provides timely heating of water. Due to the fact that it is constantly in contact with water, scale accumulates on it. The absence of its removal entails a breakdown of the heating element - often it burns out without assuming restoration or repair. If the reason lies precisely in the electric heater, the water in the dishwasher does not heat up, which means that all the dishes remain greasy.
• The sprinkler impeller has stopped working - this element is designed to spray water in order to clean all the dishes as much as possible. If the impeller does not work, then the water does not reach all surfaces, and the loaded remains unwashed.
• The water turbidity sensor has burned out - the system shown is available in modern models relevant technology. The operation of the system is to transfer the quality of the water to the module - if it is considered cloudy, the washing should continue, which is determined automatically. If the system fails, then there is no turbidity detection and the machine automatically decides to end the cycle upon completion of the program time.
• The recirculation pump has broken down - in this case, the equipment will not start its work, since there is no water supply during the presented breakdown.
• The thermal relay burned out - this system is a transmitter for the heating element about the intake of water in the car. The thermal relay at a certain moment gives a signal about the beginning of its operation and heating occurs. If the system does not work, the heating element does not turn on and does not heat the water.

The dishwasher may work poorly or stop altogether due to an error in the operation of the control module. In this case, the system does not give commands, which is why there is no collection of water or its heating. The presented breakdown requires serious repair with the involvement of a special programmer.

If the cause of dirty dishes or is the breakdown of any element, you should call the master. The specialist will immediately determine the cause and the out-of-service part. If necessary, they will immediately carry out a replacement, and it will be possible to use the equipment in the near future.

What to do?

Having disassembled everything possible reasons, it should be concluded what to do if the dishes remain dirty. The sequence of actions of the hostess is as follows:

1. If the dishwashing detergent has been replaced, change it again with a new one or return the old one to use. Look at the changes that have taken place.
2. If the product has not been changed, purchase it again at another online store. Perhaps a fake was bought, so the composition does not contain the appropriate and necessary elements.
3. Increase the amount of rinse aid - this must be done every time the machine is loaded with a large number of utensils.
4. In the next load, immerse a smaller amount of dishes to eliminate the option of misusing the equipment.
5. Rinse all equipment - instructions for timely and proper care have been described above. It is important to descale the machine.
6. Experiment with the mode of operation of the equipment - due to constant operation, parts wear out and work no longer at the same productivity.
7. Check the sequence of the running program - as soon as the dishes are immersed in the tank and the program starts, water starts to fill. It should be checked for quantity, as well as for subsequent distribution over the entire surface of the washable elements. It is also necessary to check whether the water is being heated - heating element burnout is a common problem in the breakdown of equipment. Try to independently determine the cause of the breakdown in order to exclude possible other prerequisites.

If all the actions presented did not lead to a positive result - the dishes remain dirty after washing - contact the master who can identify the problem,. Timely replacement of one part will prevent other systems from breaking down.

The bulk homework goes, as usual, to the weaker ones, namely women. But there are still gentlemen who are always ready to help. They invent new and new machines that should lighten the hard work of women. After washing machine, in second place you can safely put a dishwasher that washes dishes. She really is a great helper, especially in large families with many children.

When we purchase such things, we hope that they will work for a long time and without breakdowns. But, unfortunately, technology sometimes fails, even machines from the world wide market can fail. well-known manufacturers, such as Bosch, Siemens, Hansa. Why, or does not wash at all? There can be many reasons for breakdowns, most often this is due to the fault of the owners themselves.

Dishwasher - complex mechanism requiring maintenance, and if the manufacturer's recommendations are not followed, its performance may deteriorate.

In this article, we will look at some of the main reasons bad cars when the dishwasher does not clean the dishes well. We will also try to explain how to deal with this without the help of a master, as well as how to prevent a serious breakdown of the unit.

The machine does not wash dishes - what is the reason

As long as the machine is new, it will do its job perfectly - washing dishes. But eternal mechanisms have not yet been invented, and those that we have need to be looked after. Also with kitchen appliances, if you do not carry out preventive maintenance in time, over time you will start to find food leftovers on the dishes, which means that the machine is malfunctioning, and it's time for you to look into it. By the way, the reasons for poor work are most often banal, and the owners themselves are to blame for this. As practice shows, basically it is:

1. When purchasing a car, you did not read the instruction manual to the end, or maybe you completely ignored it.
2. In the hustle and bustle of everyday affairs, you forgot that the equipment that washes also needs to be cleaned.
3. They did not buy detergents in time, and for some time the machine worked without them.

Next, we will consider in more detail the reasons indicated above, as well as some others, in addition to this, we will try to figure out whether it is possible to cope with the problems on our own. Dishwasher inside looks something like this. Read the instructions for your machine - details may vary.

Reason 1 - You haven't cleaned your car for a long time

The dishwasher began to wash poorly, and you need to figure out the reasons. Whatever model your car is, no matter how reliable it may seem to you, but, like any mechanism, you need to take care of it. Your car needs regular maintenance cleaning.

What exactly should be periodically inspected and, if necessary, cleaned:

1. Filters need constant inspection, as they can become clogged with food debris.
2. Check the coarse water filters from time to time, especially if the water was dirty.
3. Look around the nozzles, they can become clogged not only with food residues, but limescale can form in them.
4. If your water is hard, then scale will soon appear on the heating elements.
5. Also, a similar plaque can form in the water tank.

Now let's take a closer look at the above points:

• In the lower compartment of each dishwasher there is a waste water drain, which is covered with a fine mesh (it is called a filter). Take it out, clean it, and rinse it at least once a week, but you can do it every day after use. It gets clogged very quickly with leftover food, napkins, labels, or anything else, the drain becomes clogged. This operation is simple and does not require any special knowledge or skills; any housewife can handle this operation.
• There is another filter that also needs to be checked, but much less often, once a month. This is a coarse water filter, it is usually placed at the inlet, it is designed to hold large particles, they appear in pipes after various repairs. There are always enough of them in the pipes, and if there is no this filter, then your machine may fail in the first days of operation. If this filter is not cleaned for a long time, then over time the water pressure will weaken, the quality of dishwashing will deteriorate.
• The third position is nozzles, they can also get food waste, but besides this, their narrow holes over time begin to be tightened with limescale. The nozzles may be clogged. Again, the pressure of the water supply is reduced, and dirt may not be completely washed off the dishes. To clean the nozzles use special detergents, wash carefully.
• The same trouble awaits the heaters and the tank, they also need to be inspected and cleaned. Limescale is easier to remove when it is still a little, and it has not hardened, it is much more difficult to do it later.

Reason 2 - violation of the rules of operation

Even if your car is perfectly clean, it can still malfunction, what can provoke them? What mistakes do the owners of these devices make, what causes them to malfunction, and how this can be avoided. Three main mistakes that are allowed when operating dishwashers:

1. The dishes are set incorrectly.
2. Dishes may be more than the allowable norm.
3. Incorrect operating mode is activated.

In the operating instructions for the machine of any model, it is necessary to spell out how to properly arrange the dishes. Therefore, before turning on your unit, carefully read the user manual.

The basic rule for all dishwashers: plates and mugs are placed so that the water must drain. Plates are set on edge, and mugs are upside down. Also, a minimum gap must be maintained between them so that water from the nozzles can reach all objects.

If you have a lot of dirty dishes and you use both baskets, then try to arrange the dishes so that the items on top do not cover the flushing of the lower ones.

Dishes that are too tightly spaced will not wash, the dishes will remain soapy, and you will have to run the machine a second or two. And if you stacked the dishes in such a way to save time, water and electricity, then after the first time you will realize that you were mistaken, water does not wash away soap. Another important requirement for successful dishwashing, this is the right mode. Soup bowls are one thing, and pilaf or roast bowls are quite another. Greasy and dry dishes quick wash may not wash off, and again you will lose both time and wind up extra kilowatts.

Be sure to remove food residues from the plates, only in this case you do not have to clean the filters after each dishwashing.

Reason 3 – Use of cheap detergents

After buying an expensive dishwasher, some owners of these units take cheaper funds in order to save money. And as a result: the dishwasher began to wash poorly, dried food will remain on the plates, the water pressure drops, there is no appropriate temperature, the filters clog faster.
It would seem that it's okay, it's just not the tool that the manufacturer recommends, but the problems are above your head. But you don’t have to worry much, all this is easily solved if you fill the dishwasher with the right chemistry again.

If your area has hard water, then you definitely need salt to soften it, this is necessary for the stable operation of the ion exchanger.

In some cases, even when using the products recommended by the manufacturer, the dishes may not be washed well, what is the reason? The reason is most often elementary - attempt to save money, incorrectly selected dosage of the product. Therefore, if the dishwasher began to wash the dishes poorly, after washing you noticed stains on the plates, this means you need to change the dosage of the detergent supplied. But do not overdo it - because if there is a lot of funds, it may not be completely washed off with water from the surface of the dishes, and subsequently you will have food with a taste of chemistry.

How to use the dishwasher correctly, and what tools are best to use - in the video.