Buy various items You can buy furniture in a store, but it will be much cheaper to make them yourself. Such a solution will not only be profitable, but will also allow you to realize your design ideas. home handyman. A do-it-yourself shoe rack can be made from scrap materials. It is not at all necessary to purchase a whole laminated chipboard sheet, furniture panels will be enough. Such blanks can be bought at any store. building materials. They are completely ready for assembly - they have edges and are cut into equal parts.

Preparation before starting work

If you are making a shoe rack with your own hands, you can purchase metal mesh for it. Their standard width can be 46.4; 56.4; 76.4 and also 86.4 centimeters. If there is a need to make a design custom size, then the mesh can be ordered depending on your wishes, but this approach will cost a little more. If the shelves have the most impressive width, which was mentioned above, then external dimensions The shoe racks will be as follows: 120x90x34 cm. A depth of 34 cm will be enough to place medium-sized boots there.

If you make a shoe rack with your own hands, then important point is functionality and compactness. To do this, it is recommended to place the shelves at a slight angle, which will be facing inward. In this case, the cabinet will take up a minimum amount of space.

Preparing parts

When making a shoe rack with your own hands, several elements are prepared. Among them are the sidewalls, facades, top cover, back wall and drawers. The last three elements will be needed in a single copy, while the sidewalls and facades will be needed in the amount of 2 pieces. Sidewalls can be made from furniture board, and facades will look great from MDF or laminated chipboard. The back wall can be formed from hardboard.

If you are making a shoe rack with a seat for the hallway, you should not forget about the presence of fasteners.

Preparing accessories and fasteners

The master will have to purchase 8 confirmations, 4x16 self-tapping screws, facade handles and dowels, furniture steel corners, 4 hinges and a drill, as well as a hammer and screwdriver.

Carrying out the assembly

Using confirmations, you need to fix the drawers on the sidewall. To do this, you need to make through holes for the fasteners, the diameter of which will be 8 millimeters. The drawers in the end parts should have small holes, the depth of which will be 60 millimeters. All holes must match as accurately as possible. Half of the corners should be screwed to the top cover, while the remaining 4 are used instead of wall fasteners. They need to be installed to the side parts.

If you are making a shoe rack with a seat for the hallway, then all the elements are tightened with self-tapping screws. Before attaching the hardboard, you need to check how even the box is; its diagonals should be equal to each other. On the vertical sides of the facades you need to measure 15 cm from the bottom and top. While the depth should be 2.2 cm. At the marked points you need to make holes with a diameter of 3.5 cm. At the next stage, the doors are installed and secured, and the handle is also fixed.

Such a shoe rack, the drawings of which you can draw up yourself, is installed on the floor or suspended at a certain height from the surface. This will allow you to carry out wet cleaning under the new piece of furniture. The distance between the second and bottom shelves should be 35 cm, which will allow boots to be placed there.

Making a compact shoe rack

If you don’t have too much space in your hallway, you can make a compact model of a shoe rack. Any master can handle these jobs. First of all, prepare long shoe brushes, special plywood, self-tapping screws, tenons, wood glue, moisture-resistant varnish, acrylic paint and a brush.

Work technology

The shoe rack, the size of which you can select depending on the number of family members, must be made according to a certain method. It involves the use of brushes at the first stage. 6 holes should be drilled in the edge of the plywood into which tenons, pre-treated with glue, are installed. Identical holes are made in the plywood, which will later allow the elements to be coated and connected to each other. For reliability, the workpieces are tightened with clamps.

This design will also have side elements that are installed in the same way. Use the tool to saw off the handles on the brushes, if any. Drill two holes in each of them and screw the blanks to the base with short self-tapping screws. Brushes will prevent damage to shoes while using your homemade design. It is recommended to place the shoe rack with a slight slope relative to vertical surface. This will allow the shoes to stay on the shelves and not fall out.

Conclusion

A metal shoe rack is considered not very practical, since, for example, patent leather shoes in it can be accidentally damaged. However, it is still possible to make it; for this you should use new ones that are installed in several rows using metal corners or wooden slats. It is recommended to paint the last elements to match the color of the dryer. A self-made shoe rack is not only a useful piece of furniture. It can become an excellent interior decor for your hallway - it all depends on the imagination of the master and the desire to create.

For residents small apartments The issue of shoe placement in the hallway is very acute. Families with children know what it means to have shoes scattered throughout the apartment. The problem is no less pressing for those who like to select a variety of accessories to complement their look. To maintain order in your home and conveniently arrange each pair, it is not at all necessary to buy expensive shelves from the assortment furniture stores. Make convenient devices for storing shoes you can use available materials if you use your imagination. Here are some examples for inspiration.

Simple wooden cabinet

Making such an interior item is quite simple. The four boards are connected to each other using furniture screws. Thin wooden planks are attached to the cabinet fronts. The best paint for painting is water based. Optional top part can be made contrasting and adapted for sitting.

You can simply hang your shoes on the shelf!

The idea is brilliant in its simplicity. To avoid dirtying the floor with dirty soles of boots and sneakers, you just need to keep them suspended.

Wooden pallet shelf

They make a lot of things out of such an affordable and practical thing as pallets. They are also suitable for making shoe racks. Building such a piece of furniture is quite simple, since parts of the pallets for the hallway can be left untreated.

Ladder instead of a shoe cabinet

For this idea it will work as a ready-made wooden staircase, and made independently from planed boards. The main thing is that the steps are located at an angle so that shoes do not stain the wall.

Rack of boxes

Wooden boxes are another versatile tool for hobbyists original furniture. If you place the drawers vertically, they are suitable for storing tall autumn and winter shoes. Lateral surface can be adapted to store keys, accessories for hoopoe behind shoes and other useful little things.

Rack for shoes of different heights

In spring and autumn, the weather is very changeable, and shoes of almost all seasons can be relevant. Such simple design with shelves different heights allows you to store autumn boots next to sandals and sneakers.

Bee hive

Very original design can be created by combining several wooden hexagons, each of which is suitable for storing one or even several pairs of shoes, depending on their size.

Shelf with French chic

An ordinary piece of furniture can become a real hallway decoration if you glue a special film or paper with text printed on the back of the shelf. With this design, it is better to choose a neutral color for the shelf itself.

Skateboard shelves

True skateboarding fans always have a few old boards that have fallen into disrepair. As a last resort, you can turn to fellow hobbyists for help. Multi-colored shelves are great for storing sports shoes.

Shoe organizer

The design of shelves of different heights allows you to store shoes for different weather conditions. A small mirror in the hallway will allow you to evaluate your image before leaving the apartment.

Farmhouse style bench

It is very convenient to store shoes in closed drawers located on the shelves of the bench in rustic style. This storage method gives the hallway a neater look, since shoes are hidden from view.

Full wall shoe cabinet

So that the design does not seem cumbersome, it is better to choose boxes from thin plywood and arrange them in the form brickwork. The strength of such a locker ensures wide board, to which individual shelves are attached.

Diagonal shelves

By placing regular wide shelves diagonally, you can significantly save space in the hallway.

Copper pipes

An original piece of furniture can easily be made from pipes left over after a bathroom renovation. To attach the shelf parts together, special adapters from a plumbing store are suitable.

Dynamic design

Bars of the same size are attached to the wall using special movable corners. When folded, the structure is decorative panel, and if necessary turns into space for storing shoes and accessories.

Often in the process of design and arrangement various rooms people face certain difficulties because they cannot choose the optimal furniture for the chosen style. In this case, the perfect solution is to make your own various items interior In the hallway there may be limited space and unusual shapes of the room, so you can create a shoe cabinet with your own hands, perfect for the area chosen for it.

Initially, you should decide what material will be used for the work, as well as what shape and size the future structure will have. The materials most often used for these purposes are:

• MDF, which makes it possible to obtain environmentally friendly, reliable, inexpensive and resistant to various influences structures;
• Chipboard is the most available material, but it is important to make sure that there are no formaldehydes in it, and due to the fragility of the material, you should work with it carefully so as not to damage it;
• plywood has good quality and strength, therefore it is quite often used to create various interior items, but when using it you need to pay attention and spend money on finishing the structures being created;
• natural wood is considered the ideal solution for making a shoe cabinet with your own hands, as it is environmentally friendly, beautiful and reliable.

If you can’t spend a lot on a cabinet cash, then chipboard is selected. If you select quality material, then it will be quite durable and reliable, and with proper care it will last a long time. It is incredibly easy to work with, so the process of creating a design does not require significant effort, and you do not need to have any specific skills or use unusual tools.

After selecting the material, the preparation of all elements that will be used in the work process begins, these include:

• the chipboard itself, and the boards are available in numerous colors, which makes it possible to create a design for shoes in the hallway that has the optimal shade;
• fittings designed to open doors if a closed piece of furniture is intended to be created;
• tools, which include a screwdriver and a screwdriver, a bit for self-tapping screws and confirmations, as well as an awl and a drill for confirmations.

Most often, slabs of two different colors are chosen for this design - wenge and a light shade, since this combination ensures a truly attractive look that fits well into the interior. different interiors bedside tables. No complex or unusual tools are required for the job, since the shoe cabinet is considered easy to create, so no specific fasteners or complex connections are used.

Tools

Materials

Detailing

This process assumes precise definition sizes of all parts that will be needed in the process of forming this piece of furniture. Detailing makes it possible to really get high-quality construction, in which all parts have the required dimensions, and there are no distortions or other defects.

The main details of the future bedside table include:

• roof and bottom of the product – 1100*250 mm;
• sidewall and internal stand part – 2 parts made of chipboard 668*250 mm;
• internal shelves located horizontally – 3 parts measuring 526*250 mm;
• facades – 2 parts 311x518 mm;
• partitions for overshoes located inside the structure - 4 parts measuring 510x135 mm, 4 parts - 510x85 mm and 4 parts - 510x140 mm;
• rear wall – 1 piece measuring 696x1096 mm.

When using such parts, it is possible to obtain a cabinet that is sufficiently voluminous and convenient to use, equipped with 4 sets of overshoes, handles and thrust bearings.

Preparing parts

As soon as all the necessary drawings have been made, on the basis of which the process of creating the structure is carried out, and the detailing has also been completed, you can begin to prepare the parts. This process is not considered too complicated, so it is easy for beginners.

A special diagram of the future bedside table must be made first, since it must be used when forming various parts, otherwise there is a high probability that there will be various irregularities or other problems in the design.

How to make parts? The procedure for creating them is divided into stages:

• a large Whatman paper is prepared, onto which the drawings are transferred, so that optimal patterns will be obtained;
• they are carefully cut out and then applied to chipboard sheets;
• the paper is securely fixed to the plates;
• the cutting of parts begins, and for this you can use a jigsaw, special knife woodworking or other tool.

Particular attention must be paid to the evenness of the cut parts, otherwise the resulting structure will not have ideal evenness.

Another significant point is the edging of parts. This process can be performed using an edge made of paper or plastic. Since all actions are performed at home, a paper edge is usually used. This is due to the fact that when using plastic product availability required specialized machine and professional expensive glue, which is heated before use to high temperature, which guarantees excellent adhesion between the cabinet parts. Therefore, people who independently engage in this work are selected paper edges. It is advisable to carry out the lining using a sufficiently thick edge, the thickness of which will not be less than 2 mm, thanks to which the shoe cabinet will not only be beautiful, but also resistant to various influences.

Finished parts

Parts are pre-ground

The edge is attached with an iron

All required holes prepared in advance

Assembly

As soon as all the parts necessary to create a cabinet in the hallway with your own hands have been prepared, you can begin to connect them, which guarantees the assembly of the structure. During the assembly process, you should constantly focus on pre-made drawings, as well as check them, since often certain parts are created incorrectly, so they need to be adjusted.

To assemble a bedside table correctly, take into account correct sequence actions to complete this process:

• first, the frame of the future structure is assembled, for which 4 main parts are used, and these include the bottom and lid, as well as two sidewalls;
• Confirmats are usually used to assemble the box, since the various plugs from them will not be visible anyway, and minifixes or furniture corners of suitable size are often used for these purposes;
• after receiving a reliable box, the installation of internal elements begins, and they are fixed to the sides and bottom using confirmations, but they are attached to each other and to the roof using metal corners;
• Next, the rear wall of the structure is mounted, and usually it is created entirely from thin fiberboard, since it will not be subject to significant loads, and it will not be used for any purposes, therefore it acts only as a decorative element.

When attaching the back wall, you can check the evenness of the resulting product, since if there are any distortions, they will be immediately clearly visible, and if they are detected, it is recommended to redo the product.

Thus, assembling a chest of drawers or a cabinet yourself is quite simple. Photos of different ones homemade designs are presented below, and each residential property owner has the opportunity to realize his own unique ideas, so you will receive an original and unique product that is perfect for a specific corridor.

The box and internal shelves are assembled separately

Internal shelves are inserted into the body without additional fastening

Attaching the wheels

Shoes are the passion of many women. How many pairs of shoes are needed for different occasions? Shoes for a business meeting, comfortable boots for walking, soft slippers. What can we say then when we are talking about a family where everyone needs boots or sneakers. Therefore, everyone faces the problem of storing it.

It is often difficult to install a spacious shelf in a small hallway. Shelves and cabinets simply don't fit the size of your narrow hallway.

In this case, you need to contact a custom-made furniture workshop. However, such services are more expensive standard solutions factory production.

But the issue can be resolved differently. Make your own cabinet.

Shelves

Materials for making the cabinet can be chipboard and MDF, as well as plywood and natural wood.

It is necessary to take into account that plywood and wood are much more expensive than chipboards. But furniture made from these materials is more durable compared to Chipboard is better tolerates humid environments.

Chipboard and MDF boards, unlike wood, do not require additional processing.

The compressed structure of MDF makes the material quite durable. Working with this material is quite easy. Also consider its weight. We recommend using MDF only as a facade.

Chipboards have a wide color range. Therefore, it will be quite easy to fit the cabinet into the interior of the hallway.

As an additional decoration, you can order milling on the slab. This will make it unique.

DIY cabinet

A box for sneakers, sandals and boots and folding drawers.

In this article we will look at the manufacturing process of a cabinet, the frame of which is made of 16 mm chipboard. Partitions are completed from chipboard 10 mm.

Let's play on the arrangement of two colors. We will make the sidewalls, roof, internal pillars and bottom from dark alder, and the facades from light alder.

You can give your drawings and they will cut the chipboard boards for you in a store that has special equipment. You can also include edging tape in your order.

But if you are limited in funds or want to train your skills, then you can do it yourself at home. But it must be taken into account that without specialized tools and certain skills it will not be easy to avoid chipping.

How to glue the edge yourself?

The edge happens paper and plastic.

To glue the edge at home, you need:

1. Apply special glue to the edge.
2. Heat the iron to maximum temperature.
3. Through thick fabric Press the edge with light pressure.
4. Remove any remaining glue.

Cabinet details

Parts made from 16 mm wood-laminated plates, dark alder color:

• roof - 1100×250−1 piece;
• bottom - 1100×250−1 piece;
• sidewall - 668×250−2 pieces;
• internal stand - 668×250−1 piece;
• internal horizontal flat piece of wood - 526×250−3 pieces.

Parts made from 16 mm wood-laminated plates, light alder color:

• facade - 311×51 -4 pcs.

Parts made from 10 mm wood laminate plates, light alder color:

• internal partition of the shoe shoe - 510×140−4 pcs.;
• internal partition of the shoe shoe - 510×135−4 pcs.;
• internal partition of the shoe shoe - 510×85140−4 pcs.

Fibreboard part 3 mm, beige color:

• back wall - 696×1096−1 pc.

Accessories:

• shoe shoe - 192×287×85×16−4 sets;
• handle - 4 pcs.;
• thrust bearing - 6 pcs.;
• confirmations - 1 pack;
• self-tapping screws - 1 pack.

How to assemble?

To assemble the frame we will need:

• sidewall - 2 pcs.;
• roof.

We tighten the frame using comfirmats. To do this you will need a screwdriver and a commercial bit.

The final step will be installing the fiberboard back wall.

Installing the galosh

Dimensions and measurements should always be made in advance. So that you can know in advance what size the final product will be.

We mark the places where the rotation axis and the stop pin are attached. We screw the mechanisms to the sidewalls. Mounting dimensions and drawings are given below.

Each shoe shoe comes complete with a drawing and wiring diagram installations. According to the drawings, we make markings for fastening.

We fasten the shoe shoe to the sidewalls using self-tapping screws. The shoe shoe must have free movement.

We connect parts made of 10 mm chipboard with plastic parts. We insert the elements of the shoe shoe into the grooves and place them on the screws to the left side panel. Next, we screw it to the vertical partition. Let's do the same on the reverse side.

The final stage is the installation of facades. We use double-sided tape for this.

Then we attach the handles to the facades and installing thrust bearings.

A cabinet made with your own hands will please the eye and delight with its functionality, making movement around the hallway more comfortable. Your slippers will always be in their place.

Organizer made of fabric or cardboard

Quite a convenient and easy to carry thing.

Let's consider the case when the corridor is so small that there is no room for a bedside table at all. In this case, the organizer will come to our aid. It can be purchased at the store, or you can make it yourself. The material for making the organizer can be fabric or a cardboard box.

If the hallway has a closet with a suitable niche, then you can place organizers in it. We stack them on top of each other and set by surprise. During the manufacturing process, we impregnate it 3 times with a water-repellent spray or a solution of water and PVA glue. Thus, our product will have greater rigidity.

DIY cardboard shelf

This is the most budget option shelves. And everything you need to make it can be found at home.

You will need:

1. cardboard;
2. ruler;
3. pencil;
4. PVA glue;
5. scissors or carpenter's knife;
6. stapler;
7. scotch.

The most budget option when necessary materials or no money.

Lay a sheet of cardboard on the floor. We cut out rectangles measuring 45 by 30 cm from it. We form triangles 30 cm high from cardboard. This is one cell of our shoe rack. We connect them in a row. The edges must be sealed with tape to prevent the cardboard from tearing.

This great solution For country houses. The disadvantages of such a shelf are instability and low reliability. Therefore, it is better to put it in a niche.

You can also construct an organizer from thick paper or wood directly on the cabinet door.

Shoe rack on a cabinet door made of cardboard:

• cut out rectangles,
• roll them into a pocket,
• insert them into each other,
• attach to the cabinet door.

Shelf made of wooden planks:

• Attach a wooden strip to the cabinet door.
• Insert your sneakers, sandals or sneakers into the gap between the cabinet and the plank.

Open option. Quite convenient to use.

You can also do open option products made from wooden planks or boxes. In such a shelf the item will dry well. But it will also collect dust.

You can combine items and create a completely unique shoe rack that will not only collect all your shoes, but will also decorate your hallway. You can use the most ordinary objects for your own ideas: pipes, glass bottles.

So, you see that there are many solutions for how to organize and store shoes even in the narrowest hallway. Decide what suits you best. Choose a shoe rack design with moving or static shelves.

Furniture designed for storing shoes can be varied. Conventionally, such pieces of furniture having different sizes And appearance, are united by a common name - shoe rack.

Furniture designed for storing shoes can be varied

Shoe racks can be presented different types furniture. It could be:

• shoe stand;
• a cabinet with drawers and shelves;
• shoe cabinet;
• nightstand;
• dresser;
• special stand;
• high shelf or small shelves;
• shoe shoe.

In addition to size and color, important parameters that you need to decide on when choosing include the material used in manufacturing, as well as the configuration.

Shoe racks can be open or closed.

1. The first option allows the shoes to dry quickly, but the disadvantages include a significant accumulation of dust, accessibility to pets and a not very attractive appearance.
2. Closed models are aesthetically pleasing and are equipped with doors that serve as full protection for shoes.

How to design a shoe rack (video)

Characteristics of types of shoe racks in the hallway

Classification of shoe furniture is carried out not only according to the type of material used in production, but also design features, operating principle and appearance. For production, MDF, laminated chipboard, forging, durable metals and high-strength modern plastic, wicker and natural processed wood are most often used.

Narrow shoe racks in the hallway

Standard models are usually 600-800 mm wide. A wider version is installed in spacious hallways and can be 100-120 cm wide, which allows you to store any type of shoes and prevents deformation. Narrow models are designed specifically for small spaces, and their width, most often, does not exceed 13-18 cm, which makes convenient installation even behind a swinging door. It should be noted that narrow structures are not intended for storing winter shoes with high tops.

A compromise option is presented narrow shoe racks with a width of 400-500 mm, in which shoes are installed quite freely and dry well. Some manufacturers produce narrow and tall exclusive models with a depth of 150-200 mm. Among other things, the consumer can order a model that is non-standard in shape or size, as well as make it independently using standard drawings and diagrams.

Narrow shoe rack models are designed specifically for small spaces

Shoe racks with seat

Designs equipped with a seat, which is most often covered with soft upholstery fabric, velor or leatherette, are widely used in fairly spacious rooms. Shoe ottoman or shoe rack-bench – perfect solution for small hallways. The advantage of such models is the presence of seats installed on top of the cabinet, which will save usable space.

The seat can be equipped with a backrest, and this design resembles the appearance of a small sofa. Additional equipment for models with a seat is most often represented by sections for umbrellas and side shelves.

Gallery: shoe rack in the hallway (64 photos)

Racks and shelves for storing shoes

TO open type shoe storage includes several options that differ design features and presented:

• frame systems in the form of a set of racks and shelving made of wood or metal. Such systems can be easily assembled and disassembled, they will not take up much space, which is especially important for small hallways;
• a modular system containing compartments, shelves and sections that can be easily and quickly assembled independently according to the principle of a designer;
• a mesh system characterized by lightness and compactness, which is very important when arranging small hallways.

Panel systems are popular, very stylish, but expensive designs that are easy to use and can become a real decoration for almost any interior.

Ideas for storing things in the hallway (video)

Shoe rack design

Shoe racks of any size and type serve as part of the furnishings of the room, and can not only be open, corner or wall-mounted, but also vary in style. Designs can be made in the style of “modern”, “rococo”, “classic”, “baroque”, “high-tech”, “Provence” and “country”, as well as “fusion”.

• designs that have an original appearance and carved legs are ideal for decorating a hallway in the Rococo style and will serve as a successful addition to elegant pieces of furniture;
• for a private household or apartment, registered in decorative style“Baroque” is best suited to a beautiful forged shoe rack, the dimensions of which are selected based on the area of ​​the hallway;
• a hallway made in a minimalist style is perfect for purchasing and installing simple and discreet, monochromatic iron models, equipped convenient drawers retractable type.

Particularly popular in recent years They use light and practical, incredibly attractive wicker structures that allow you to decorate your hallway in the Provence style.

A shoe rack of any size and type serves as part of the room’s furnishings

How to make a wooden shoe rack for the hallway with your own hands

Traditionally, the simplest and cheapest option for shoe storage is a DIY one. wooden structure. Wood is a natural, very easy to work with and aesthetic material, characterized by environmental cleanliness. Among other things, shoe structures made of wood and treated with special antiseptic compounds are durable and suitable for installation in hallways decorated in almost any style.

Drawing up drawings and diagrams with dimensions

At the first stage, a design sketch is developed. You can take as a basis ready-made diagrams and drawings of such a piece of furniture for the hallway, or develop a sketch with a designation yourself, based on the size of the room and its layout. In the drawing you are making, it is necessary to display the number and dimensions of shelves or other elements, as well as the overall dimensions of the entire structure.

As a material for self-made Shoe racks can use MDF boards, chipboards, plywood sheets or wooden boards. One of the most durable and easy-to-use materials is plywood sheet, but even moisture-resistant plywood needs additional processing and painting. The high cost of MDF boards allows you to make only facade part furniture, and the body of the structure, as a rule, is assembled from fairly inexpensive chipboards.

At the first stage, a design sketch is developed

Manufacturing stages

To produce a structure made in the minimalist style popular among designers, it is necessary to prepare the basic materials and working tools presented:

• furniture metal corners in the amount of eight pieces;
• self-tapping screws;
• tsargi;
• four hinges for hanging doors;
• metal mesh shelves, the number and dimensions of which directly depend on the prepared sketch;
• handles for opening doors;
• construction tape;
• marker;
• screwdriver or hand drill;
• screwdriver;
• grinding machine or sandpaper;
• wood hacksaw or electric jigsaw;
• hammer;
• pliers.

All elements of the drawing are transferred to the material chosen for the manufacture of wooden shoe racks. In accordance with the markings, the parts are cut out using a hacksaw. After all the parts have been cut out, the sidewalls are drilled with the shoe construction being made. IN drilled holes It is necessary to reliably fix the metal drawers using confirmations, the end part of which must also be drilled. If the selected depth is 55-60 mm, then the diameter of the holes drilled should be 0.5 cm, and in the sidewalls - 0.8 cm. Be sure to check the coincidence of all holes made.

Shoe ottoman or shoe rack-bench is an ideal solution for small hallways

The next step is to securely screw four metal furniture corners to the lid. The remaining four similar furniture parts should be fixed on the back wall of the structure being manufactured, which will allow them to be used as convenient wall fasteners. After the lid is screwed on, it is necessary to connect all the remaining cut out elements of the shoe structure to each other.

Very important in the process self-assembly V mandatory check the geometry of the piece of furniture being manufactured - the diagonal direction must be the same.

On the front part of the rack in the form of a dryer, it is necessary to make markings for installation furniture hinges.After screwing them in, you need to hang the shoe rack doors. Then the place for installing decorative elements is marked, if they are provided for in the sketch, and the fittings are screwed onto the doors.

Despite the fact that the dimensions of the product depend entirely on personal preferences and the size of the hallway, the standard distance between installed mesh shelves should not be less than 30 cm, which will ensure ease of use of the structure. Among other things, shoe shelves made on the basis metal mesh, will be more convenient if they are installed at a slight angle.

How to assemble a shoe rack with your own hands (video)

Final works

On final stage it is necessary to check the completed design using building level, and also, if necessary, sanding and painting if moisture-resistant sheet plywood was used for production. As practice shows, if there is a need to perform original design spacious hall, it is best to order furniture product, having previously selected a design and optimal configuration that matches the style of the room.

Attention, TODAY only!