A gas boiler in the kitchen is not uncommon. The popularity of such units is due to the availability of energy resources and their low cost. If you are wondering whether it is worth buying gas equipment, read our article. In it we will talk in detail about the advantages and disadvantages of gas boilers, their types, operating features and installation requirements.

Advantages and disadvantages of using gas boilers

The undoubted advantages of gas-fired boilers are:

1. Long service life;
2. High reliability;
3. Possibility of heating large areas;
4. Easy to control;
5. Large selection of models with various design features;
6. High efficiency;
7. Cheapness and availability of fuel;
8. Ease of maintenance;
9. Low cost.

The disadvantages of gas boilers include:

1. Work only when there is gas in the pipe;
2. The need to obtain appropriate installation permits;
3. The appearance of soot when burning energy during low pressure in the system;
4. Decrease in efficiency when pressure in the gas pipeline decreases;
5. The complexity of installing the boiler, chimney and ventilation system.

Types of gas boilers for the kitchen

Gas boilers are produced in various designs and differ in many parameters, so everyone will have enough room for choice. Boilers are produced:

1. With one and two circuits;
2. With closed and open combustion chamber;
3. WITH different types ignition;
4. With external and internal boiler for heating water.

In addition, heating devices differ in the installation method - installed on the floor or mounted on the wall - and have different power.

Number of circuits

Boilers are produced with two circuits and with one. Single-circuit models are used only for heating water, which is then distributed through pipes, but double-circuit models allow not only to heat the room, but also to provide for the residents of the apartment hot water. However, units with one circuit can be used to heat an apartment and consume heated water - you need to additionally purchase a boiler and connect it to the boiler.

Combustion chamber

Boilers with an open combustion chamber are so called because they take the air necessary for fuel combustion directly from the room. The exhaust gases then escape through the chimney. If for some reason it is impossible to install a chimney in an apartment or it is simply missing, then buy a gas boiler in the kitchen with a closed combustion chamber. The air in such a fuel combustion unit comes from the street.

Ignition type

Boilers can be with automatic or manual ignition. In the first case, they will turn on independently when there is voltage in the network; in the second case, the boilers will have to be put into operation manually.

Boiler

There are models of boilers with built-in and external boiler. Boilers with a built-in tank are more convenient from an aesthetic point of view; they are compact and do not take up much space, but at the same time the volume of the boiler is limited. Boilers with an external boiler are more difficult to install (there is a need for additional communications and connections), but the volume of their tank can be an order of magnitude larger.

How to choose a gas boiler for the kitchen?

When choosing a gas boiler in the kitchen, consider the following factors :

1. Manufacturing company;
2. Unit power;
3. Installation type;
4. Number of circuits;
5. Combustion chamber type;
6. Heat exchanger type;
7. Boiler volume.

Additionally, you can pay attention to how much fuel the boiler burns per hour, how much power it consumes from the network, how many liters of water it heats per minute.

Manufacturing company

Today there are a huge number of companies on the market that are engaged in the production and sale of heating equipment. The most popular of them are: Ariston, Lemax, Neva, Teplodar, Viessman, Baxi, Buderus, Navien, Protherm, Wolf, Ferroli. These manufacturers offer a wide range of gas boilers in any price category, with different technical characteristics. You can buy them both in specialized stores and on company websites via the Internet.

Unit power

For heating 10 square meters The premises require 1 kW of power (rough calculation). Based on the square footage of the apartment, you can easily calculate the required boiler power. To get more accurate values, just use an online calculator, which is freely available on the Internet, or specialized software.

Installation type

Boilers are wall-mounted and floor-mounted. Each type of heating equipment has its own advantages and disadvantages. Thus, wall-mounted boilers are easier to mount, they are more compact and take up very little space in the room, they are cheaper than their floor-standing counterparts, and there is no need to install a classic chimney underneath them. Their disadvantages include lower power and durability, sensitivity to coolant quality, and lower efficiency.

Floor-standing boilers are more resistant to wear, less susceptible to corrosion, have greater power, increased service life, and efficiency. Among the disadvantages are the need for a spacious room for their installation, the noisy operation of the units, and the complexity of installation. As a rule, floor standing boilers they are practically not installed in the kitchen, except in private houses with spacious kitchen area. For a city apartment, a wall-mounted boiler is quite enough.

Number of circuits

As mentioned above, a boiler with two circuits is used for space heating and hot water heating, with one circuit only for heating radiators. “Double-circuit” systems are more profitable because:

1. There is no need to pay bills for the consumption of hot water, a cubic meter of which costs more than 100 rubles;
2. Their efficiency is higher;
3. They are compact and do not require a separate room for the boiler.

Disadvantages of boilers with two circuits:

1. The cost is higher, but the equipment pays for itself quickly;
2. The secondary heat exchanger of boilers often fails;
3. After opening the tap hot water does not start flowing immediately;
4. Whenever emergency situation residents are left not only without heat, but also without hot water;
5. The need for additional cash expenses: for commissioning work, service.

Single-circuit boilers should be purchased only if space heating is required; otherwise, it is more profitable to buy boilers with two circuits.

Combustion chamber type

It's better if you have a kitchen with gas boiler, which has a closed combustion chamber. It is more compact and does not burn air from the room, is cheaper to install, but during operation it emits more noise due to the fans operating inside. Boilers with an open chamber are cheaper, but their installation is more expensive; installation requires additional vertical chimney equipment and a spacious room with good ventilation.

Heat exchanger type

The most popular are boilers with steel and copper heat exchangers. Actually, they are most suitable for installation in the kitchen. Units with a cast iron heat exchanger are manufactured in a floor-standing design and have heavy weight, you can’t mount them on the wall.

Boiler volume

Try to choose a boiler with such a boiler volume that there is enough water for your needs without a lot of it remaining. Approximately calculate the volume of water, otherwise the boiler will always heat excess water, and this will consume additional gas.

Where should gas boilers not be placed?

By existing rules and standards gas boilers It is not allowed to install on surfaces made of flammable materials, in rooms where there is no window or door, on a balcony or in a basement.

Requirements for the room where the boiler will be installed:

1. The area of ​​the kitchen with a gas boiler must be at least 4 square meters, the volume must be at least 7.5 cubic meters + 0.2 m3 per kilowatt;
2. Ceiling height – 2.5 meters and above;
3. The power of the boiler for installation in the kitchen should not exceed 60 kW;
4. The room must have a window and a door, the width of which must be at least 80 centimeters.

Boiler installation features

There are certain requirements for installing the boiler:

1. When installing a wall-mounted unit, its height above the floor must be at least 1.5 meters;
2. There must be sufficient air circulation. It is better to install the boiler opposite front door and near a blank wall. If you plan to hide it in a closet, then there should be supply valves on its doors;
3. If you plan to hide a gas boiler in a kitchen unit behind a box, the material it is made of should not be flammable; fire-resistant plasterboard can be used for this purpose;
4. The cabinet in which the boiler is planned to be installed must be treated with resistance to open fire composition. The distance between the boiler and the cabinet walls must be such that servicing can be carried out without problems.

Before installing a gas boiler in an apartment or private house, thoroughly read the regulatory documents:

1. SNiP “Residential buildings”;
2. SNiP “Gas supply” 2.04.08-87;
3. SNiP “Heating, ventilation, air conditioning” 2.04.05-91

Boiler installation stages

The installation of the boiler must be carried out by specialists! The main stages of installation are:

1. Determining the location where the boiler will be located;
2. Docking of heating elements;
3. Connection of the boiler to the cold and hot water supply system;
4. Connecting the unit to the gas main;
5. Putting the device into operation.

The cost of installing a boiler depends on many factors. Average prices range from 6,000 to 12,000 rubles.

A heating boiler can be decorated with a kitchen set only if the dimensions of the cabinet ideally match the dimensions of the boiler. Otherwise, you need to choose another way to disguise a gas appliance in the kitchen.

Many owners of both private cottages and apartments in multi-storey buildings, decide to disconnect from the heating plant and install independent heating. As a rule, a gas boiler is installed in the kitchen. An ordinary white unit can disturb the interior of the room, so they think about how to fit the boiler into the existing design.

A gas boiler can only be installed in non-residential premises, and the presence of a window and door is required!

The design of the part of the room where the boiler is installed needs to be thought out before installing the heating device.

How to hide a boiler:

• Homemade chipboard box for the boiler. Ideally, the front panel of the box should coincide as much as possible with the facade kitchen set.
• Niche made of profile and plasterboard. The front part of the structure is also closed with a door under general style kitchens.
• Finishing the boiler with film or special paint.

When installing new furniture, you need to discuss in advance the size and location of the cabinet for the boiler. The wiring of communications is also taken into account, which can be hidden if desired.

Floor-standing AGV can be installed in the corner of the kitchen according to the installation rules. It is also allowed to hide the floor-standing boiler in a cabinet-cabinet, while complying with the standards and safety rules.

Kitchens with a gas boiler: design and installation of a chipboard cabinet

If a gas boiler was installed after purchasing a kitchen set, and there is no way to hide it in one of the existing cabinets, you can decorate it homemade door. To make a boiler cabinet with your own hands, you will need chipboards and wooden slats.

In addition to the tools - tape measure, bolts, jigsaw and awnings, you will need a ready-made door that is closest in color to the kitchen facade.

Before starting work, you need to accurately calculate the dimensions of the gas boiler. The minimum distance from any side of the boiler to the cabinet is 3 cm, respectively, add 6 cm to the height and width of the boiler and select a door of this size.

Work progress:

1. You need to cut out chipboard from chipboard with a jigsaw. side walls cabinet, based on measurements. The depth should also be 3-4 cm greater than the depth of the gas boiler.
2. Make holes in the bottom wall for water and gas supply pipes, and in the top wall for the chimney.
3. Use a crown to cut holes for furniture curtains on the right or left side.
4. Maintaining perpendicularity, fasten all sides of the cabinet together with bots. There should be no back wall; instead, attach two planks parallel to each other at the top and bottom.
5. Attach the fasteners to the kitchen wall using the fixed slats. Hang the cabinet door with curtains.
6. Attach the resulting structure to the boiler and hang it on the wall.

A wall-mounted boiler can be placed in the corner of the kitchen by mounting it in a wall-mounted corner cabinet or cover it with the same homemade door. If desired, you can leave the device open and disguise it with beautiful decor - stickers or decals.

Kitchen in a private house with a gas boiler: installation rules and regulations

Placing a gas boiler in the kitchen requires certain rules and regulations. Failure to comply with them can lead to serious consequences. The room in which the gas boiler is installed must be at least 4 square meters, more than 2.5 m high, have a window and a door to the corridor. There must be a device in the kitchen that will notify you of a gas leak.

The power of gas boilers installed in the kitchen should be no more than 60 kW. The heating boiler can be installed on the floor or attached to the wall.

You will learn about the operating principles and design of double-circuit boilers in the following article:

The gas boiler is attached to the wall, which is made of non-combustible materials. The boiler must not be installed close to cabinets; there must be space for air circulation between the appliance and the walls of the furniture.

The layout of gas and water pipes must be carried out in accordance with the rules. The gap between the boiler and the refrigerator and gas stove must be at least 30 cm. The heating boiler is installed at a distance of at least 0.8 m from gas meter at a height of 1.6 m. The electrical socket for the boiler is mounted at a distance of 1 m.

After the boiler is installed and all lines are connected, it is strongly recommended to check its operation and the chimney draft - the safety of using the device depends on this.

Kitchen interior with a gas boiler on the wall: how to hide communications

Having resolved the issue of masking a gas boiler in the kitchen, the question often arises of gas and water leading to the appliance. The bulky, ugly chimney and hoses connecting the unit to the system are also not pleasing to the eye. individual heating.

Under no circumstances should all elements be covered in the wall; they must be accessible if necessary!

Today, the most popular option for hiding communications is a box made of profiles and plasterboard, which can be covered with tiles or wallpaper. When installing the box, you should use moisture-resistant drywall.

The gas pipe can be hidden behind the kitchen unit. In this case, cabinets and bedside tables should not put pressure on the pipe; you need to leave about 1 cm of free space between them. If the pipe runs at a height of more than 1 m from the floor, you can use it as a stand for towels. To do this, the pipe is cleaned of rust and covered with several layers of chrome paint - after drying, you can hang towels and napkins on it.

Corner plumbing or gas pipes, which cannot be covered with a cabinet, can be decorated with artificial flowers or fruits, decorated with glass mosaics, or painted with colored paint to match the interior of the room.

Question to the designer: how to hide a gas boiler in the kitchen (video)

Hiding a gas wall-mounted boiler is not a problem if you approach this matter wisely. After correct calculations and installation of a homemade cabinet, you need to think about gas and water pipes, which can also disrupt the entire design of the room. Ideal option- sew them in plasterboard box and decorate with tiles.

Examples of how to hide a gas boiler in the kitchen (photo)

The heating boiler, if it does not fit into the overall interior of the kitchen, can be hidden. But not all methods are suitable for this. For example, it can be installed in a kitchen set only if the dimensions of one of the cabinets match the design of the boiler. If this is not possible, you will have to look for other methods of disguise.

Installation Rules

Before we talk about how to hide a boiler, you need to find out what rules and regulations exist in relation to its installation. If you don't follow them, everything can end very sadly. The first thing you should pay attention to is the space in which the installation will be carried out: its size must be at least 4 m2, and its height must be more than 2.5 m. But you should also take care of installing a special device that can notify you in the event of a gas leak.

When purchasing a boiler, you need to take into account that its power should not exceed 60 kW. Installation of equipment can be carried out on a wall or prepared floor. The system should not be placed close to cabinets, as it must be present free space for good air circulation. Please note that if your home has wooden floors, then the wall that is allocated for installation must be covered with a sheet of metal.

What other rules must be followed:

• the distance to the cooking stove or refrigerator should be at least 30 cm;
• the unit must be placed at a distance of 1.6 m or more from the meter;
• The socket intended for boiler operation must be placed 1 m from the installation.

As soon as everything is installed and communications are connected, experts strongly recommend checking the chimney’s functionality again. This directly depends on safe operation device.

Options

So, after the owners have purchased a new boiler, plans begin to install the equipment. Most often the standard unit white negatively affects the appearance of the interior, so owners think about how to fit it into the overall design.

So, the design of the corner where the boiler will be installed must be organized even before the heating device is installed.

Of course, the most the best solution will carry out installation in special cabinet which will be made in accordance with design design the rest is the headset. But a specially prepared one can also be installed metal frame, which will be covered with plasterboard. A boiler is hung inside such a niche, and lastly a door is installed on it, which will also repeat the appearance kitchen furniture. There is an option for finishing the front panel of the boiler. It can be painted or decorated with self-adhesive. And most simple solution It will be possible to place the boiler somewhere behind one of the sides of the set; this will be suitable if the color of the heater matches the furniture.

All design decisions must be made prior to boiler installation. In addition, you need to take care in advance about choosing the cladding of communications. Discuss the required dimensions of the furniture, and pay special attention to the dimensions of the place where the cabinet will be located.

As for the floor-mounted AGV, it can be placed in the corner of the kitchen, it can also be installed in a floor-standing cabinet, but all safety regulations must be observed.

Design with cabinet

If the boiler was purchased after the kitchen set had already been installed, and it is not possible to hide it, it is possible to hide it behind a self-made door. In order to make a cabinet, you will need wooden slats and chipboards. The tools you may need are: a tape measure, various bolts, a cutter, awnings and a ready-made door that will look like a kitchen set.

Before you start creating a cabinet, you will need to very accurately calculate the design parameters. Please note that the minimum distance from the boiler to each wall will be 3 cm. Accordingly, when calculating the width and height, you will need to add 6 cm to the dimensions of the boiler. Having received the required indicators, you can select the door of the desired size.

Now you can get to work.

1. To begin with, we make the side walls of the future cabinet from chipboard. It will be most convenient to do this electric jigsaw. Pay attention to the depth, it should be 3 cm greater than the depth of the gas boiler.
2. At the bottom of one of the walls we make holes that will help connect communications to the boiler. You will need to make another hole at the top; it will be needed for the chimney.
3. We make special holes on the right and left sides that will be required for the awnings.
4. While maintaining perpendicularity, the entire structure must be assembled and fastened with bolts. There should not be a back wall; instead, several planks are attached.
5. We attach the cabinet door to the prepared canopies. The finished structure can be placed on the boiler and hung on the wall.

Thus, you can even install the unit in a corner; for this you will need to make a corner cabinet with the same door. If you don’t want to do design work, you can simply disguise the boiler using stickers or decals.

You can close the boiler not only using chipboard, but also using drywall. This method similar to the previous one, only here the basis will be drywall, which will be hung on the boiler.

To carry out this work you will need:

• metal profiles;
• GKL slabs;
• facade headset;
• hinges for installing the door;
• self-tapping screws;
• screwdriver or screwdriver.

Now that everything is at hand necessary materials, you can begin the design process.

The operating technology is simple:

• in a parallel position from the walls of the boiler, retreating about 4 cm, we construct a profile frame;
• All metal elements we fasten it using self-tapping screws and place it on the wall;
• We cut out sheets of the required size from plasterboard and mount them on the already assembled frame;
• in one of the installed walls we create several recesses to place hinges in them; they, in turn, must be screwed to the profile.

After this you can place the boiler. The last thing you need to do is hang the door.

Other options

You can hide a gas boiler in the kitchen not only in a closet; there are ideas that, as you are convinced, will help you use this installation for individual heating in an apartment in the most profitable way.

In addition to the method discussed above, there are a number of simpler ones that allow you to decorate the surface of the boiler so that it matches other furniture designs.

• if work will be carried out on the facade of the boiler, then the film should be selected in such a way that its differences with the rest of the set are minimized;
• the work must be carried out very carefully so that bubbles do not appear, pasting must begin from the top, and each subsequent centimeter must be carefully smoothed;
• When the work is finished, all protruding excess film can be cut off using a stationery knife.

Of course, this design has a number of obvious disadvantages.

These include:

• difficult selection of film, since it is not always possible to find the shade and pattern that would match the set;
• such a coating will not last long;
• very often such finishing leads to loss of service warranty.

Sometimes you can find painted boilers. But this approach is chosen only in relation to old Soviet-type models that have been hanging indoors for a long time. New model It’s unlikely that anyone will decide to design it this way.

If the owner decides to paint, then he will need to do the following:

• the surface of the boiler must be cleaned and degreased using white spirit; please note that already at this stage you lose the warranty on boiler maintenance;
• Since the bodies of these thermal units are made of metal, it is better to purchase nitro enamel for painting; the painting itself can be done in any convenient way.

Most often, if the kitchen design has already been developed, the new boiler is hung on the side of the unit. Even if its design is different, it will still be able to fit into the already formed environment. If the unit is made in white, and the set is in a different color, but it has white elements, then the idea can be very successful.

Let's see how to hide a floor-standing gas boiler in the kitchen in the corner - the photos will show us how to arrange a kitchen set so that the kitchen design does not suffer from such proximity.

Why is it necessary to hide such bulky equipment as a floor-standing boiler in such a small room as a kitchen? Because not every house has a room designated specifically for the placement of boiler equipment.

However, before making plans for such placement, inquire with your local gas supply organization, and not with a specially designated boiler room. I think their answer will sober you up a little.

Photos of wall-mounted gas boilers placed in the kitchen

In the meantime, we will show exactly how wall-mounted gas boilers can be placed in the kitchen. Look at the photo and think again whether you need a floor-standing gas boiler given this condition of its placement.

Look carefully - there is a gas boiler with a coaxial chimney hidden there.

More on this topic on our website:

1. 
   See how you can play up your kitchen design with an individual heating boiler in the corner. The photos will tell you options for your own placement of a gas heat generator...
2. 
   Installation of a floor-standing gas boiler differs significantly from installation of a wall-mounted boiler. A floor-standing boiler is often much more powerful, its assembly diagram is more complicated,...
3. 
   Faced with the need to install heating equipment, the owner of the house will definitely ask himself the question of which heating boiler to prefer: a wall-mounted one or...
4. 
   A floor-standing gas boiler is practical, reliable and quite simple system heating, the main advantage of which is that it does not...

In modern new buildings, systems are increasingly being used autonomous heating, which allow residents not to depend on the mood of utility services. The apartments are equipped with units that create a comfortable indoor temperature for a particular family. The owners of these apartments are the real lucky ones: when in the chilly autumn the whole city is tensely waiting for the coveted connection, they turn on the gas boiler in one motion and, voila, the house becomes warm and comfortable. However, even these darlings of fate are faced with a difficult task during renovation: how to think through the design of a kitchen with a gas boiler? The most interesting thing in creating such an interior is deciding how to play with this complex mechanism, so that, depending on individual preferences, he either solos or dissolves in the kitchen ensemble.

Technical difficulties

Gas services operate according to the principle “You can’t!”, you must always remember this and try artistic means design the kitchen so that it is convenient for your family, makes a lasting impression on guests, but does not infuriate the engineers servicing the VDGO. Don't you need fines?

So, what requirements must be met when planning a kitchen design with a boiler?

Specifications	Can
Ceiling height of at least 2.5 m
The volume of the room (the air inside it) is at least 15 cubic meters.	Combine the kitchen with the dining room (not with the living room!), leaving the opening open and thus increasing the volume of air.
Ventilation providing at least three air changes in the room in 1 hour
A window with a mandatory window and a glass size (light opening) of 0.03 sq.m. per 1 cubic meter room volume	Nowadays, during construction, double-glazed windows without windows are used and gas services “turn a blind eye to this”
Door between kitchen and living rooms with distance from door leaf at least 2 cm to the floor surface.	If a classic door is absolutely not convenient for you (the layout of the room does not allow you to take into account all the standards), use sliding doors, sliding doors (going into the wall), accordion doors

Very important: understand the SNiP “Gas Supply” standards yourself. Of course, you trust your designer, he is a professional. But in practice it often happens that it is better to check everything yourself.

In a new building, private house, old apartment

Upon purchase new apartment with the AOGV system, you already get a room with a wall-mounted gas boiler, which is located where the gas workers placed it. Moving it involves a lot of technical, paperwork, time and financial difficulties, so it’s easier to leave everything as is, and hide the device and pipes in a furniture column that will line up with all the cabinets of the set. With this placement option, it is necessary to leave the top of the column open and provide big hole(it can be camouflaged ventilation grille like a built-in refrigerator) to ensure the necessary air exchange, and calculate internal dimensions pencil case so that the required air gaps remain. Yes, and room thermostat you will have to make it remote so that it measures the real temperature of the apartment air.

Without erecting complex design, and leaving the unit open, you can place it in a series of kitchen cabinets, matching it to the color. Beige, matte gray, silver, yellow, bright red, coffee, blue, lingonberry, coal black - modern appliances have a wide range of colors. Or ask the graffiti masters - they will paint the front panel in all the colors of the rainbow. And your “warm” friend will look great in the tone of the furniture or in contrast with it.

If you are the owner of a private house, how will you arrange necessary equipment and tying kitchen furniture to it depends only on three factors:

• your imagination;
• room size;
• preferred style.

Don't forget to put non-flammable flooring in the area where the gas boiler is located, even if the rest of the area has oak parquet.

In ancient (pre-revolutionary) houses and buildings from the Stalinist Empire style, niches are found in almost every room for cooking. But if you don’t have it, then you can design it yourself and entrust the implementation to the masters. By visually changing the space, transforming its volumes, you will make it more non-standard, and the interior will only benefit from this.

A gas boiler, hidden in a niche made of gypsum fiber board or light blocks, and closed with mesh doors that duplicate kitchen facades, or imitate Italian shutters (if you prefer a retro style) will be perceived by the eye as an interesting volume of the wall, the highlight of the layout. When fitting the device into a niche, it is necessary to provide a small gap between it and internal surfaces boxes that are finished with non-flammable materials or coated with special paint. The distance from the walls to the unit should be at least 2-3 cm on each side.

Gas boiler as an art object

The easiest way to make a gas boiler the center of your kitchen universe is if the kitchen design is made in the following styles:

• Retro;
• Loft;
• Country;
• Modern;
• Futuristic minimalism (then numerous pipes that are intertwined at impossible angles can be easily decorated, and the entire structure will look like an installation from the Museum of Modern Art).

The range of modern gas boilers is very wide: from replicas of ancient equipment with outer casing made of polished copper, in which everything inside is made according to last word appliances, huge floor systems that combine multiple functions and are reminiscent of English ovens of the Victorian era, to models that look like an appliance taken from a spaceship.

If your artistic taste is consistent with the available funds, then such a unit can become the dominant feature, the center of attention of the kitchen-dining room. Ask yourself: are you ready for the constant admiration of everyone who sees this miracle, and the praise that flatters your pride? If so, then a kitchen design that revolves around a gas boiler is an option for you!

How many square meters should the area of ​​the room be in order for it to be located according to the standards? gas equipment? Start from the Khrushchev buildings - they only have 4-5 sq.m. How less space, the more interesting the task that the designer (or you, if you have taken on this role) has to implement.

Professional consultants will help you choose a worthy result of technical progress in terms of power and characteristics, but you will have to decide which is better: floor-mounted or wall-mounted. Nowadays, attachments are the most popular; they are smaller in size, but are not inferior to their down-to-earth counterparts in terms of performance. So, it would seem, the choice is obvious. But this is only if you start repairs from scratch. And if you are doing renovations in old apartment and there is either no opportunity or desire to change an expensive item?

In the kitchen small size It is better to use the boiler in the upper part of the room. You don’t have to cover it with a removable box or an imitation of a fragment of a kitchen set. But even if you plan a floor one, then place it near the wall (corners) where the door is located. According to the laws of the psychology of perception, a person pays less attention to objects located to the side and behind him when he enters a room. The best option the left position is considered, because most people start their review on the right.

By designing a small kitchen with a floor-standing gas boiler, you further narrow the scope of possible design ideas. Use shades of white on large surfaces (walls, ceiling, floor, curtains or blinds), it is optimal in this case, choose open shelves, reduced dimensions of kitchen furniture and a snow-white boiler. General minimalism and monochrome will help make the room airy, providing more free living space.

Precautions

So that in a house, especially a wooden one, everyone lives happily ever after and the whole family gathers in a warm beautiful kitchen drink tea with buns while developing a design kitchen interior which includes a gas boiler on the wall, pay attention to the following points:

1. Be sure to consider the placement of gas detectors (gas leak sensors). These devices are almost invisible, but can save your life.
2. Trust the connection of gas equipment only to official specialists.
3. Provide a device supply ventilation to receive fresh air inside the room was constant.