The computer loves order and precision. Tangled wires, disks and flash drives scattered around the room, printers and scanners standing in the corners, you name it! It's time for the computer to create an organized space. Then it will be easier to work on it, and all the little things will be within a limited scope. To do this, you need to buy a computer desk, shelves, bedside tables and drawers. Although, you may not be in a hurry to pay a lot of money for quite simple furniture. Homemade table for a computer will solve several problems at once.

Small computer desk, defining goals

There is a wide variety of seas on sale office furniture for office equipment, there are also inexpensive models, but the most profitable option is do-it-yourself computer desks. We will show you drawings and diagrams, photos and some developments today, but you will have to adapt other people’s developments to the conditions of a specific room or, perhaps, a loggia individually.

The dimensions we give as examples will simply indicate the proportions, since even a difference of a few centimeters can make a difference huge role in the layout of the table and its placement in the room. Calculations, detailing and determination of exact overall dimensions The computer desk should be made according to the location. First of all, we must decide for what purposes the table will be assembled and try to optimize the costs of its assembly.

Functions and tasks of a computer desk

Computer desk can perform a lot of functions. If you think everything through correctly, it will become an excellent storage place not only for computer peripherals, but also for all your home office and just a work area. As a rule, modern man is not limited to just a desktop computer.

He may have several mobile devices at his disposal - a laptop, tablet, smartphone. However, for the most complex tasks We use a desktop computer. And also for those cases when you can’t do without peripherals.

Necessary elements of a computer desk for home

Therefore, a computer desk should have the following functional areas:

Also, drawers and bedside tables will not be superfluous if they do not extend beyond the dimensions of the tabletop.

Placement and materials for the table

Now the question arises of how to place the table in the room. The best option for small rooms- corner computer desk. We have attached several drawings of such tables and anyone can, looking around themselves right now, mentally attach such a structure in a free corner. So it will take a lot less space than if the table were organized along the wall.

There are no problems with materials for a working computer space. The easiest option is to cut out the parts according to patterns from laminated chipboard. Although some prefer more exotic materials - a glass or metal table. Chipboard - best option. Not entirely environmentally friendly, but cheap. And the choice of textures and colors is simply huge.

As a rule, there are no problems with cutting either. It is enough to buy the required amount of material and prepare drawings of the parts, and they can be cut using special equipment designed for precise cutting of chipboard. If there is no such office nearby, then you will have to use a jigsaw.

Thus, having examined the attached materials and diagrams, you can decide in principle on the design and basic elements, and the table itself, thought out to the smallest detail, will become a corner for comfortable and fruitful work and relaxation. Happy calculations!

Today the whole world is moving away from physical labor and gradually moving toward mental labor. The list of professions has been replenished with specialties that do not require the employee to be directly at the workplace in the office. Nowadays, many people work remotely, sitting at their computer and doing the customer’s work. But you can’t give up your personal workplace, where everything you need for comfortable work will be stored. Therefore, many husbands and fathers try to find for their wives and children convenient options tables. After all, you can make a computer desk with your own hands. This requires time and great desire. In this article you will learn how to make a table.

Today there are computers in every home. Convenient and affordable access to the world. But they have one problem. Many were rather annoyed by the presence of endless wires, a large system unit, and they would also like to install a printer. Of course, all these things are visible. They tend to spoil the impression and overall picture of the room. The advantage of homemade computer desks is that everything is in your hands. Only you know what is convenient for you and what is in the way, what height of the computer desk you want and how many cabinets should be retractable, only you can decide where to hang the shelf and where to abandon it.

Do you have a small room and many children? A do-it-yourself corner computer desk or a transforming desk will help you retire and devote your time to work. There is another table option that is attached directly to the wall and can be folded. Making such a table yourself is as easy as shelling pears, but how much benefit it will bring to you and your family. You can drink tea or place your laptop on it at any time, as well as free up the space that was occupied by the table a minute ago. There can be an endless number of design variations. You can add your imagination and wishes to this list, which will make it even longer.

Which form should I choose?

When you decide to make such a design, you need a plan on how to make a computer desk with your own hands. First, calculate the location and dimensions of the future table. A list of types of furniture designed for work will help you here:

• angular;
• combined;
• direct.

A corner version of a computer desk can be implemented between two walls, at the junction of a wall and a window, or in contact with the wall only on one side. Here the dimensions need to be controlled depending on the purpose of the table and the dimensions of the room itself, or its free space.

The direct version can be equipped with shelves and cabinets for small items. If you use a computer, then this option is suitable for you. Then you can hide a powerful system unit, allocate a pull-out shelf for the keyboard and mouse, install the monitor on a lift, and allocate space for other gadgets. If you use a laptop or other gadget wirelessly, you can use more modern version computer table. Attached good countertop to the wall, I don’t use legs, yours workplace will captivate everyone who enters the room. This move is very profitable and requires minimum costs. You can always buy separate shelves or make them yourself. Plus, the fewer closets you have, the less unnecessary things will overwhelm your life.

The ideal option, according to psychologists, is a combination of the first two. It should be large and combine corner and straight countertops. Work at such tables is usually also combined. A person should have where to turn around and where to put necessary documents. This desk with extension and cabinets will take up a lot of space, but will make you love your job. After all, sitting at such a table is a pleasure.

If you still haven’t managed to come up with the placement of a computer desk, then here are a few useful tips. Usually allocated for work daytime days. Sitting at a corner table near the window, work will go along with sunlight. Thus, together with the natural clock, a person will quickly concentrate and complete the assigned tasks by the evening. Place the table with its back to front door so as not to be distracted by incoming messages. Depending on the type of activity, select the size and shape of the cabinets. Consider whether they will be built into the table or located separately from it. If, in addition to working with equipment, you need to write something down, then the table should serve as a writing desk.

Preparation

Upon completion of the fantasies and desires outlined in the preliminary sketches, you should have finished drawing and diagram. To implement a table with your own hands, drawings are available on the Internet. If you haven't found the right one, you need to know some standards that comply with the rules and laws of ergonomics. Straight or angled height desk must be at least 75 centimeters. For a tall person, his parameter should be multiplied by 75 and divided by 175. As a result, the resulting value will be ideal for him. The depth of the working area of ​​the countertop should reach an average of 70 centimeters. But, if space allows you, the number can be increased. In cases where a monitor stand is planned, the depth of the tabletop can be reduced, which will save space in the room. These values ​​are selected for ease of use, but your wishes play a more important role.

You can make a computer desk with your own hands only if you have the necessary tools. You will need:

• screwdriver;
• jigsaw;
• chisel;
• drill or drill;
• grinding machine,

and don’t forget about the standard items: pencil, tape measure, ruler. A jigsaw will help cut off all the curved parts on the sheet. To cut the parts, you will need a saw or hacksaw.

Now decide on the material. A wooden table will look luxurious. Noble and expensive material will decorate the room. If you are new to design, then it is better to start making a desk with your own hands from chipboard. The material is much cheaper and more accessible than natural wood. In addition, here you can find a wide selection of colors and experiment. The most affordable will be a table made of plywood, which will fit into the Art Nouveau, country or loft style. Today, a fashionable move is a tabletop made of a tree cut across the growth of a tree, in which all the insides of the trunk are visible. It must be raw. You definitely don’t want to overwhelm such a force of nature with extra cabinets. But it will certainly please the eye.

Next step

When with preparatory work finished, the question arises of how to make and assemble a table with your own hands. The scheme is not complicated: you need to cut the material into parts of the required sizes in accordance with the drawing and connect them into one whole. If you don't have the necessary tool for cutting chipboard sheets, you can always ask for help at furniture companies who will be happy to make preparations for you. In addition, this option will be done not only quickly, but also efficiently. After all, without much experience in this matter, you can easily spoil the material or make a mistake with the dimensions. Moreover, if a diagram of a computer desk with an add-on or a drawing of a corner desk with additional drawers complex, then you definitely cannot handle such a design.

For the main parts, buy chipboard with a thickness of at least 16 millimeters. For drawers, 10 millimeters is suitable. Corner cuts of the material need to be processed. For this purpose, use a special edge tape, which is first heated with an iron and then carefully laid out along the cut. The contact between the iron and the tape is not direct; be sure to place plain paper between them, as the tape can easily deteriorate under the influence of high temperature. If the tape comes out wider than you expected, you can always trim it.

Be especially careful when attaching the planks drawers. It’s better not to make mistakes here, and check all the marks several times before final fastening. In addition, such a system is made for a sliding keyboard. It should glide smoothly and not go astray.

How to assemble a table

Always start work with supporting parts table. You need to analyze which parts play the role of support and begin assembling them. If you did high quality drawing, deciding on the assembly order will not take much time. In addition, for those with little experience who want to do something with their own hands, it is better to transfer the drawing to natural size onto cardboard or paper. Thus, the likelihood of making a mistake will decrease. For pull-out shelves be sure to screw the guides. All parts are fastened with self-tapping screws.

After they are assembled, you can attach the tabletop. Determine the location for attaching the top part with the support parts, and drill holes. This must be done carefully so as not to drill through the material. To do this, you need to install a limiter that will protect you. Remember that all holes must be made strictly at 90 degrees to the floor or countertop. Then, when connected, the entire structure will be firmly fastened. Otherwise, the table may be unstable. For a more durable and durable result, you can add a small amount of PVA glue to all sockets and holes. Instead of glue, you can use furniture wax.

After fastening the main parts, the structure needs to be fixed. This is done using zip ties. Then, you can disassemble and reassemble your table or improve it. Sometimes special holes are cut out for the wires, then the eternal cobwebs under the table will not bother you. This assembly scheme is suitable for all types of tables. As you have seen, this is not very difficult to do.

Conclusion

A computer desk is a necessary piece of furniture because it is not just a surface for a laptop, but also a work area. So, a person can keep on it all the necessary gizmos and objects that he uses in the work process: an office, a copier, a fax, a telephone, and other elements.

If you have a desktop computer, then in the apartment, along with the obligatory pieces of furniture, there must be a table of a special design that allows you to place complete set personal PC equipment. Moreover, very often it is not always possible to purchase a table ready for use, since many of the offered models simply do not fit into the decor of a particular apartment. The simplest way out of this situation is self-assembly a PC table made taking into account the characteristics of the room allocated for it. But before you make a computer desk with your own hands, you definitely need to familiarize yourself with known variants of these prefabricated structures, as well as with the features of their manufacture.

Design selection

All the variety famous models computer desks used in living conditions, can be reduced to the following three types:

• corner;
• with a direct tabletop arrangement;
• combined.

In case self-made table selection of the appropriate option for you should be made taking into account the following requirements:

• ergonomics;
• correct choice of location, taking into account the quality of natural light, depending on the location of window openings;
• availability of raw materials and ease of manufacture.

The first of these requirements means creating conditions that ensure ease of use of the computer environment (mouse, keyboard, system unit and monitor). The possibility of their implementation should be provided for by the design of the future product itself.

As for choosing a place for a computer desk, the first thing to take into account here is the protection of the display screen from direct solar radiation, which can lead to burnout (fading) of its cells, and working in such lighting is very inconvenient. That is why the display stand included in the product should be positioned in such a way that light from the sun does not fall on it directly, regardless of the orientation of the windows in the room.

Choosing a workplace with a low level of illumination (windows are located on the north side, for example) is also undesirable, since this complicates the work with paper documentation and in this case additional lighting will be needed even during the day.

The most convenient option is the western or northwestern arrangement of windows in the room reserved for the PC. The choice of a specific desktop option (corner, straight or combined) depends on a number of factors, which will be discussed below.

The peculiarity of corner structures, which occupy a minimum of space in the room, is their compactness and the ability to fit organically into limited spaces. In addition, such tables are cheaper in terms of total material costs and easier to manufacture than all other models and therefore can be easily made even by a novice in plumbing.

Shortage usable area in such a structure can be compensated by increasing its number of storeys, i.e. due to the manufacture of an additional retractable panel for the keyboard and a separate shelf for the speakers. In a simplified version of such a product, the system unit is installed directly on the floor of the room (under the desk).

Full straight table

The difference between a straight computer desk and a regular desk is that its individual sizes and shapes are adjusted to meet ergonomic requirements. In addition, when organizing its free space, you can choose any zoning depth convenient for you. In other words, this design allows you to implement the most various options arrangement of equipment, starting from allocating a separate place for a display on the tabletop and ending with a complex multi-level organization that allows you to place everything you need for professional work.

The materials for making such a table will require approximately twice as much as for arranging a corner structure. In addition, its self-assembly will require the performer to have carpentry skills related to processing various types wood material.

The combination table combines the advantages of a computer and a simple desk and is ideal for professional work at home. However, you will need significantly more materials to make such a table (about 30–40%), since the manufacture complex elements designs related to education large quantity waste. In addition, for preliminary sawing of these elements, carried out immediately before their assembly, you will need a special cutting tool (electric jigsaw or hand cutter, used to select shaped grooves).

It is considered the simplest and most accessible for self-production. corner design, which allows, with a minimum of material and physical costs, to ensure the required ergonomics and convenience of placing the table within small room. It is this option that we will consider further.

Manufacturing procedure

To make a corner table, a dense laminated board (chipboard) is usually used, which provides the required reliability and durability of the structure assembled on its basis.

Frame making

To make it you will need the following raw materials and tools:

• chipboard blanks;
• jigsaw and screwdriver;
• a small sketch with instructions on the dimensions of structural elements;
• pencil and ruler;
• aluminum corners;
• wood glue

Assembly of the frame base is carried out in the following sequence:

1. First of all, according to the sketch, all the main blanks from chipboard are cut out, used to design the two back walls, sidewalls and the tabletop itself.
2. Then they are directly assembled, for which you will need previously prepared corners and small wood screws (to avoid splitting the slab, their length should not exceed 1.5 cm).
3. During the assembly process, first of all, the tabletop is fixed to the outer sides, and only after that the rear walls are mounted, giving it the necessary rigidity.
4. After the supporting frame of the table is assembled, it will be possible to proceed to the installation of intermediate partitions, through which several working compartments are designed (for the system unit, keyboard, as well as for placing literature, documents, etc.).

Mounting Features

In the process of manufacturing a computer desk, we recommend that you pay attention to the following subtleties of assembly operations regarding the design of fasteners:

For fastening, it is best to use confirmations, but you will also need to purchase a special drill for them. If the design is simple, then fastening can be done with self-tapping screws.

1. Before screwing the screw into the slab, first prepare a hole at the attachment point with a thin drill (to a depth corresponding to the length of the screw).
2. To increase the strength of the structure and ease of assembly, individual attachment points can be strengthened by pre-processing them with a special adhesive composition. In this case, the glue can be applied both to the area where the self-tapping screw is screwed in (directly into the hole) and to the contact areas of the workpieces being joined.
3. When screwing in self-tapping screws, the screwdriver should operate at low speed; At the same time, it is important not to overdo it with tightening the fastening (that is why for these purposes it is most convenient to use special models of devices equipped with so-called ratchets).

Installation of a retractable panel under the keyboard begins with attaching metal profiles used as guides to adjacent side posts. (They are usually installed about 20 cm below the tabletop level).

Small rotating rollers are attached to the panel itself, through which it moves along with the keyboard.

Upon completion of all the procedures described above, the resulting structure is necessarily checked for strength, after which it will be possible to proceed to placing on it the entire set of objects from the computer environment.

Video

See how you can make a computer desk with your own hands from chipboard scraps:

An interesting solution is a transformable computer desk:

Photo

A computer desk is a type of specialized multifunctional furniture that combines a desk, space for placing a PC, storing documents and office space, convenient placement periphery and lighting fixtures. Today, manufacturers offer a wide range of models that meet all consumer requirements. However, industrial designs have one general disadvantage– unreasonably high cost. In this publication we will tell you in detail how to make a modern corner computer desk with your own hands, we will look at the drawings, dimensions and popular assembly diagrams for this functional piece of furniture.

For self-creation suitable model Suitable for almost any slab building materials, possessing sufficient strength and decorative qualities. Among the most popular are:

• laminated chipboard;
• Plywood;
• Natural wood.

Some models are assembled from a combination of materials. For example, artificial stone or tempered glass can be used to create a computer desk top made from a steel frame or metal support elements.

Size calculation

Depending on your capabilities and needs, you can make a straight, corner or combined computer desk.

The size and shape of the product depend on many factors:

• Dimensions of the tabletop;
• Selecting the location and configuration of the product (straight, angular);
• Functional features (dedicated space for installing a system unit, printer, lighting fixtures, distance between supporting elements, etc.).

As practice has shown, most home craftsmen have a particular difficulty when designing a corner table for a PC. Let's look at the calculation rules in more detail.

Corner table design: product and installation features

Before you draw a drawing, you need to decide on the design of the computer desk. In the classic version, such a product consists of three modules:

1. Support box, which additionally serves as a dedicated space for the system unit;
2. Cabinet with door or drawers. This element “part-time” is the second supporting element;
3. Corner tabletop.

The computer desk assembly diagram is distinguished by its simplicity:

1. Support blocks are placed along the edges of the structure.
2. The tabletop serves as the fixing element of the modules, which is installed on the supporting elements using dowels or furniture ties(ruffixes, eccentrics).
3. To add additional rigidity, a leg made of strips of chipboard or metal is attached to the corner of the tabletop.

Settlement rules

Before you do corner table for a computer with your own hands, you need to draw up a drawing with details and dimensions of all components. Dimensions are calculated as follows:

• The length of the wing and the depth of the table top required for comfortable operation are determined;
• The width is calculated supporting structure, which will play the role of space for the system unit;
• The dimensions of the cabinet are calculated taking into account the depth of the tabletop and the required working space for the operator.

Important! For easy use and assembly corner model It is necessary to provide indentations from the edge of the tabletop to the supporting elements.

Optimal table size

In production use optimal sizes this model. Standard sizes computer desk assume the following module dimensions:

• Table top (L 1 wing * L 2 wing * W) – 1344 * 1544 * 600 mm.
• Support box with space for a computer (L * W * H) – 510 * 250 * 734 mm.
• Support stand (L * W * H) – 510 * 450 * 734 mm.

Important! In this embodiment, the distance from the edge of the cover to the installation site of the support modules is taken into account - 70 mm. Chipboard thickness– 16 mm. Overall height products – 750 mm.

Minimum size

When determining the minimum dimensions of the structure, it is necessary to reduce the depth of the tabletop, the length of the first and second wings, the distances from the edge, as well as the width of the support block for the system unit from standard values. The drawing looks like this:

• Dimensions of the tabletop (L 1 wing * L 2 wings * W) – 1104 * 1354 * 500 mm.
• Support block with space for the system unit (L * W * H) – 490 * 200 * 734 mm.
• Cabinet with drawers (L * W * H) – 490 * 450 * 734 mm.

The margins are reduced from 70 to 50 mm. In this case, the width working area It turns out 50 cm, this is enough for comfortable use by a teenager.

If you are making small table, make the system unit compartment open for better ventilation of the computer.

Instructions: how to make a computer desk with your own hands

After creating drawings with dimensions, we move on to the practical part of creating the product with our own hands.

From the right choice The material depends on the durability, strength and decorative qualities of the structure.

1. Natural wood is environmentally friendly, durable and decorative material, perfectly amenable to processing. However, working with wood requires a workshop and an arsenal of specialized tools;
2. Laminated chipboard is an inexpensive analogue of natural wood. Plates can have different thicknesses, sizes and color solutions, allowing the master to create cabinet furniture of any configuration and complexity at home. The main disadvantage of chipboard is its low moisture resistance;
3. Moisture-resistant plywood is significantly stronger than chipboard. However, this material is difficult to finishing, which significantly reduces the decorative qualities of the finished product;
4. MDF is an affordable, heat-resistant and highly decorative material with two significant shortcomings: low wear resistance and a decrease in strength characteristics during operation.

The most affordable and easiest to process material from this list is laminated chipboard, which is used as the basis in the production of most models of cabinet furniture.

Tools and preparatory work

Independent creation of corner computer desks requires the master to have a set of tools that will be necessary during the assembly process:

• Circular saw with Pobedit equipment and jigsaw for cutting laminated chipboard to size;
• Drill, drills and cutters - based on the diameter of the fasteners and the method of fixing the parts.

In addition, you should prepare a tape measure, a marker on water based for marking and a carpenter's square.

Materials you will need:

• laminated chipboard (MDF),
• confirmations,
• a specialized drill and hex bit for screwing them in,
• guides for drawers and a sliding keyboard tray,
• PVA glue,
• wooden dowels,
• self-adhesive PVC edge for decorating cutting areas.

Detailing

Knowing the basic dimensions of the future product, we begin to create all the design details.

In sizes internal parts(shelves above the system unit and false panels) the width of the chipboard is taken into account: 16 mm.

Important! Based on the design and filling of the cabinet (drawers, storage shelves), the dimensions of the internal parts, doors or drawer elements are calculated

Additional items:

1. Pull-out keyboard tray. If you use a laptop, there is no point in additionally attaching a pull-out shelf. If a table is needed for a PC, the dimensions of the shelf for the keyboard are 550 * 300 mm. You can make it yourself or buy it from IKEA.
2. Drawers. The size of the facade depends on the required number of drawers and is calculated based on the size of the cabinet with a gap between the facades of 2 mm. With four drawers:
   • The dimensions of the facade (taking into account the gaps) will be 450 x 166 mm.
   • Drawer height is 100 mm.
   • Depth - 450 mm (for using standard 45 cm guides).
   • The external width of the drawer is 398 mm, taking into account the width of the chipboard of 16 mm and a gap of 10 mm on each side for attaching the guides.
3. Guides. This scheme assumes the use of classic split guides made of two elements. This is the simplest and budget option organizing retractable structures (drawers, keyboard tray, etc.)

Additional items are optional. In some constructive solutions The cabinet is equipped with a door, without drawers.

Assembly steps

As noted above, assembling the corner model is not particularly difficult. After sawing all the table parts, we begin to create the structure.

Now it is important that the height of these elements is strictly the same. To do this, we place them side by side, and eliminate all differences with the help of adjustable supports.

1. We assemble the corner “leg” by tightening the parts with confirmations.
2. On reverse side The tabletop is attached to a frame with mechanisms for the keyboard tray.
3. Holes (diameter 8 mm) for dowels are drilled in the side of the tabletop.
4. Holes are drilled in the upper part of the support modules and dowels are installed.
5. To fix the table cover, the dowels are coated with PVA glue.
6. The tabletop is installed in its regular place.

The corner leg and support modules are connected to each other fiberboard sheets or strips of laminated chipboard 15-20 cm wide. Next, install internal filling blocks (guides, drawers), doors are hung, handles and fittings are installed.

Finishing work

If laminated materials were used to create the table particle boards, then the finishing of the product consists of gluing furniture edge to the cutting areas. This material can be made from:

• melamine,
• ABS plastic;
• natural veneer.

Today, acrylic edges with 3D patterns are widely used, which will add decorativeness to your homemade product and significantly increase its value.

You can also use a T-shaped plastic profile, the installation of which will require creating a groove in the ends of the chipboard using a router.

At self-finishing For table edges made of laminated chipboard, some craftsmen use a C-shaped plastic profile, which is fixed to the ends of the workpieces with glue.

Important! All options have the right to life except for the melamine edge, which is unacceptable for finishing a computer desk due to low wear resistance and small thickness

If you used to create the product natural wood, That finishing work are:

• in puttying and grinding of structural elements,
• impregnation of wood with antiseptic and stain,
• varnishing or waxing of the finished product.

• When choosing laminated chipboard, always pay attention to the quality of the coating and the geometry of the sheet. Pay attention to the column indicating the formaldehyde emission class not lower than E1-E2;
• Do not use for sawing laminated chipboard band saws and a jigsaw. This tool gives virtually no chance of making an even cut without chipping the laminate. The best option There will be an order for cutting the material, gluing the edges and drilling holes (according to your drawing) from the cabinet furniture manufacturer. This will slightly increase the estimate, but will significantly reduce the time for assembling the table. As a last resort, use manual circular saw with tungsten carbide disc and the ability to install a rip fence;
• Do not use standard height computer desk (750 mm), if you use a laptop without an external (remote) keyboard. When the arms are positioned high, the back becomes more tense, which leads to increased fatigue for the operator. As practice has shown, Reducing the height of the table by only 70 mm completely solves the problem of posture when working on a laptop.

Hi all! Some time ago I came up with the idea of ​​a computer desk that would suit me in everything. The day finally came when the reflection of my computer shone in its polished surface. I want to tell you how it was made and what came out of it! Lots of photos await you.

I won’t repeat myself too much, so to summarize, I wanted a comfortable, beautiful, high-quality, durable, relatively compact and at the same time mobile computer desk. This is how the idea was born, which can be seen in the first picture in the header.

As I wrote earlier, initially I was going to make this table myself, since I like to work with my hands and have some experience creating my own furniture, but after weighing my strengths, I decided that it would be too difficult for me - there are a lot of exact measurements and a lot places where a little screw-up can ruin the whole idea. Therefore, the implementation was carried out by friends who specialize in this with my direct participation. At the very first stages, I realized that this was a very reasonable decision because the sequence of actions and the professional’s approach turned out to be completely different from what I had imagined. Especially with internal radii... but first things first.

Glued oak 25 mm thick was chosen as the base of the table. From wood panels The shapes of the upper tabletop, the main lower part and the sides were prepared.

The fun started with the inner radii. These are:

How I imagined it: we take, roughly speaking, a plinth, grind out the required radius in it and glue it into the corners. All. But there are several nuances here. Firstly, it is very difficult to grind the required radius on a thin wooden block. Secondly, it is very difficult to adjust the required radius so that it fits perfectly into this corner along its entire length. And thirdly: if you managed to cope with the first two points, then the edges of the bar will be very thin and brittle, which will most likely result in “bitten” and “torn” edges outside this radius.

That’s why the craftsmen do it this way: the base is sawn, a tall prepared block is glued between the parts, and after that the required radius is adjusted “on the spot.” The bottom one is ready.

We do the same with the upper radius. We glue and customize.

At the same time, prepare all other parts of the table.

Let's put it all together:

The table is almost finished here. At the top there is a future retractable tabletop for a keyboard and mouse. Also, of course, wooden.

At the finish line before painting:

What's the end result? I'll move on without further pause.

And this is him, tortured.

From now on I’ll tell you a little more. In the last post there was a lot of discussion about how best to implement locking mechanisms. The solution, as always, turned out to be very simple: by analogy with construction equipment Two legs with rubber bands at the bottom are screwed into the floor and the table is firmly fixed in place. The same photographs clearly show the gray painted outline. I thought of it not only as decorative element, but also in order to hide the seams and joints. The paint was applied from a spray bottle, so the outline turned out to be very dense and even, and felt like plastic. I don’t want to praise myself, but I’ll just note that in real life this combination of wood and painted outline turned out to be even more interesting than in the project. The table looks very modern, especially appropriate in the Computer Desk concept.

Here: a shelf for ups and holes for routing wires.

They met!

I decided to provide additional mounting for the system unit. After all, the table is on wheels, you never know... Unfortunately, I didn’t calculate the length of the bolt a little, but I think the idea is clear.

And the mounting base for the system unit is very convenient to use for shortening wires. This way, nothing unnecessary gets in the way either underfoot or gets under the wheels.

UPS. The same photo shows the stoppers of the retractable table top. By the way, it turned out to be very comfortable and wide. It was possible to gain a little extra space thanks to the rails located not on the sides of it, as manufacturers of most computer desks do, but under the tabletop. It extends quite far without bending.

I also decided to make a small cut in order to demonstrate the beauty of its mobile properties. I note that in order to feel them, you don’t have to carry the table from room to room; it’s even convenient to just roll it away from the wall in order to plug in, say, wires. Or move it to a corner further away when guests come and you need to put a large table. I also don’t have a TV, so it’s very convenient to move it closer to the sofa... in general, there are a lot of scenarios when this might come in handy.

In general, I thought for a long time and came across several ideas for a more massive table in a similar design, which would probably appeal to opponents of retractable shelves, but for me personally I consider them very convenient solution especially in small city apartments.

I don’t want to build up bulky structures, otherwise I’ll be out of sync with the mobility ideas, so a little later I want to add a shelf like this to the table:

I'll end here. I hope that I at least a little managed to infect you with my ideas and that you happily walked with me from the first unprepossessing project in sketchup to the very kitchen at the back of that very table.