DIY house made of plywood. Instructions on how to make a dollhouse from plywood

Every girl dreams of a house for her dolls. Now there are a huge number of them on store shelves. But such pleasure is not cheap, and the assortment is the same.

We offer to please your child with a handmade gift. This will allow you not only to save money, but also to make the house one of a kind.

In addition, this will be a wonderful pastime for the whole family during leisure time.

There are many special training programs for making doll houses with your own hands. You can use a wide variety of building materials: boards, plywood, chipboard, laminate, cardboard, etc.

As a rule, the front wall on dollhouses is not made, or it is made removable or opening so that your child can put dolls there, change the decor in the rooms, and tidy up.

Choose the material - and we will teach you how to make it dollhouse with your own hands!

Dollhouses made of plywood and laminate

These are the most popular materials. Distinctive feature from “brothers” - stability and longevity. It is easy to decorate both outside and inside. But making such a house requires male strength.

If you try, such a house will be indistinguishable from the store version.

Diagrams and drawings can be found on the Internet, but if you have technical inclinations, you can try to draw it yourself. There are also photos of finished dollhouses on the Internet.

To make a house we will need:

thicker plywood (from 7 mm);
electric jigsaw;
glue;
self-adhesive floor;
pieces of wallpaper;
tape measure or ruler;
pen;
scheme;
a little imagination and patience.

Let’s get to work, having first decided on the dimensions of the dollhouse (they will depend on the dimensions of the “tenants”):

we cut out the walls of the future house from plywood or laminate;
we cut out windows and doors in them;
we glue the walls together; it is also fashionable to use construction nails or staples;
we make a roof, it can be either flat or sloping. To give a real look you can use corrugated cardboard and then paint it;
we fasten the resulting structure to the foundation - a sheet larger than the house itself. On an unused area you can make flower beds, sidewalks, a platform, and a parking lot;
we glue wallpaper and lay floors;
furnish the house with furniture;
you can also add curtains made from pieces of fabric, bedspreads, rugs, etc.

Dollhouses made of plasterboard

Many household parents, after renovations, leave the remaining building materials to gather dust on the balcony in the hope that they will come in handy someday. Their time has come! Drywall can make an excellent dollhouse.

The good thing about a house made from this material is that it is very light and easy to assemble. But, at the same time, it will need to be handled more carefully - it will be quite fragile.

The layout of such a house is no different from a product made of plywood or laminate. But assembling such a house is much easier, and there are many more layout options - with the help of partitions you can divide the rooms between each other.

Foam houses

To assemble such a house we will need:

Pay attention!

sheet foam;
glue;
canape sticks;
rulers;
bamboo sticks;
cardboard;
pieces of wallpaper and fabric;
dye;
sponge for washing dishes;

Pieces of plinth for the ceiling

Let's get started:

make a diagram;
cut out walls from foam plastic;
we make doors and windows in them;
we connect the walls using toothpicks, then glue the walls together;
to make the roof stronger, we first install bamboo sticks on top of the walls, and only then glue the roof to the walls;
we make a ladder from wooden rulers or the same polystyrene foam;
You can also use toothpicks for railings;
in addition, if desired, you can also make a balcony, massandra or even a terrace from polystyrene foam;
painting the house;
We decorate the house inside as in the previous description.

Houses made from bookshelves and cabinets

House from old furniture it won’t be difficult to do - after all, the walls are already ready.

All that remains is to cut windows and doors in them, and think about what to make the roof out of, if necessary.

It can also be made from the materials described above. We arrange the furniture, let the cat in - happy housewarming!

Cardboard houses

For this design we will need:

Pay attention!

cardboard;
house detail templates;
scissors and stationery knife;
gouache or watercolor paints.

We are building a house:

If you have a large piece of cardboard, then do not cut it, but bend it in places according to the diagram, and then glue its component parts.
install interior partitions made of cardboard, they will serve not only to delimit space, but also to fasten the frame structure.
Let's get started with renovations and furnishings!

House made of boxes

The simplest and quick option. It is enough to select the required number of boxes (depending on the number of rooms), fasten them together using a stapler, having previously placed them on their sides so that the top of the box serves as an exit.

This will allow you to open the front wall at the right time to rearrange, tidy up, etc.

We cut out windows and doors. Let's start designing the frame.

Pay attention!

House made from paper folders

It requires four folders. We cover them from the inside with wallpaper or printed sheets with decorative items and household appliances in a plane.

We cut out windows in the folders, install the folders vertically, and fasten them with the help of clips that are included with each folder. Your house is ready.

Fabric house

This option is good because it takes up virtually no space and can even be folded up.

Using a thick piece of fabric we make the back wall - it will serve as the foundation. We sew a rectangular base for the house. We make pockets to which the cardboard for the floors will then be attached. We attach ribbons to both corners of the pockets.

All that remains is to sew the pockets with a rectangular base on one edge so that the ribbons end up with reverse side. Floors using tapes and sewing the tapes to the back wall. Let's decorate the house and start playing!

You can make houses from other materials - the main thing is to show your imagination! A wonderful gift it will also be suitable for a boy - after all, you can build a garage, parking lot, etc.

Photo of a dollhouse with your own hands

Every girl can spend hours playing with her favorite dolls and toys. Previously, you could often find a father in the garage, carefully building a dollhouse for his beloved daughter.

After all, such a gift was the ultimate dream of any little princess. It is worth noting that in those days it was much more difficult. There was not such an abundance of cheap and available materials, from which one could easily build a palace for dolls.

Today we will present you 12 dollhouse projects for your little angel.

DIY projects of houses built from scratch

First proposed DIY project from Ana White - just the dream of any child. It includes three floors with seven rooms, including a bathroom and a toilet.

The entire structure is made from natural and environmentally friendly pure materials, so nothing will harm the child’s health during the game.

There are also special rollers that will make moving the structure around the room much easier. The height of the house is designed for a standard Barbie, so there will be no problems with choosing a suitable doll, and your girl will be satisfied!

Another idea from Ana White. Unlike the previous one, it is designed for smaller dolls. But this house has more detailed interior decoration and furniture. The idea of using family and children's photographs as decorations is especially well applied here.

Here we see a slight modification of the first project. A caring father decided to please his daughter with a gorgeous Christmas present! If you make a house yourself, the number of floors and rooms is limited only by your imagination and capabilities. A huge advantage in its creation will be taking into account the wishes and preferences of the child.

This amazing project from Young House Love pleases with its simplicity and magnificent design. Due to the open front panel, the house is very convenient to use. In order to secure it and protect it from falling, it can be easily attached to the wall.

Looks especially beautiful interior decoration little room. In creating the design, a variety of colored paper and highly detailed furniture.

The next DIY project is similar in design to the previous one. However, the designers from Under the Sycamore decided to use vintage fabrics with colorful patterns as wallpaper.

Such a house can be an excellent gift for a daughter, granddaughter, younger sister or niece, and adding a few sentimental accents will make it even more meaningful and dear to the heart.

Give your furniture a second life by turning it into a Beautiful Dollhouse

Naturally, not everyone has enough time and skills to create a complex DIY project from scratch. However, do not despair, you can find a way out of any situation!

To create a house, you can easily use old and unnecessary furniture, because having a ready-made frame, it is much easier to design and decorate it than to start all over from the very beginning.

Here we see an amazing bookshelf transformation idea from Simple as That. Everything looks very nice and neat. Several shelves can be turned into miniature furniture and used for games, while others are useful for storing things and toys.

Do you want to please your daughter with a long-awaited toy without resorting to serious expenses? Then feel free to start designing a tower of CDs. All you need is to build a roof, cut out some windows and add a couple of decorative elements.

Then cover the structure with several layers of paint. Here is a wonderful Delightful dollhouse and it’s ready!

Another design option for such a tower. This time using natural wood. This house is perfect for playing in the garden or yard. You can also please your daughter with dolls and furniture self made, unless of course you have certain carpentry skills.

The next idea was kindly presented by the designers from Neon Fresh. To do this, it was necessary to fasten two bedside tables, and use sheets of plywood to create partitions for the floors and interior walls.

Finally, the interior and exterior of the future house are decorated and the rooms are filled with furniture. All! Awesome DIY project is ready!

Thinking outside the box

Do you want to surprise your child with something unusual? Try this idea from Hart and Sew. It is a portable house in a suitcase. This idea allows you to make an interesting and comfortable house for dolls, into which you can put all the toys away after finishing the game.

In addition, it is very convenient to move around the room. Such a functional house does not take up much space; you can even store it under the bed.

The next project is just for those who have absolutely no space for massive structures. You'll need some sewing skills to recreate this idea from Checkout Girls. The whole point is that the furniture is held on with Velcro and can be easily moved from room to room. The panel is hung on the wall, which organizes space for games and creativity.

A grand solution for a dollhouse

This is a truly grandiose and magnificent project that has no analogues. It took Mad’s Mouse House designers 11 months to create the house. This is not just a toy, but a real work of art, one might say, a museum piece!

It hits everything: general design, created from old logs, and a huge number of floors and rooms. Look at the interiors and furniture! Everything looks so natural, as if reduced copies exactly replicate the originals.

Such a masterpiece will be the most the best gift for your daughter, and will become one of the most significant events in her life.

We hope you have received enough ideas for creativity, met the inspiration that has come and are already rushing to the garage or workshop to please your girl with an amazing gift for the next holiday.

Remember the main thing: a little patience, and you will succeed! Approach the process creatively and with love. Then this house will give your child a lot of impressions and memories for a lifetime.

Plywood of any kind - very worthy, universal building material. If you have some knowledge of carpentry tools in the form of a jigsaw, hacksaw and sandpaper and decide to build a house from plywood, the result will please you. Let us also take a closer look at the information about the types and production of this material, and the tools used for it, in order to better understand the entire construction process.

What does plywood production involve? Of course, this is the initial harvesting of wood, heat treatment, cutting into veneer, pressing it and cutting it to the required size.

In addition, when processing plywood, it is sanded, treated with special reagents, and packaged in special containers. There are several ways to make this material:

basic sawing of wood,
planing existing workpieces,
gluing veneer, which is removed in a small layer (peel-peeled plywood).

In Russia, plywood production dates back to the end of the nineteenth century. Previously, this building material was used in almost all industries, from the production of instruments for musicians to the construction of aircraft. And the range of use of this material increased every year. Our country is among the leaders in the production of high-tech plywood, including due to the wealth of wood and developed production.

Types of plywood

Now we will look at these types of plywood:

Laminated,
Moisture resistant
Construction,

Laminated plywood is a building material that occupies one of the leading positions in the list of building materials used in the construction of houses. This type owes its popularity to the presence of a laminate layer, which is applied to sheets of plywood. This type made from larch, birch and other wood species. The advantages of laminated plywood are moisture resistance, impact resistance, and ease of maintenance.

Advice!
You can use this plywood to assemble furniture, finishing works, and many times over.

Moisture-resistant plywood is made by gluing it with a special glue made using resin. This type used for interior finishing work. Russia also produces moisture-resistant plywood with increased level moisture resistance. In fact, it differs from the first type of plywood by using an adhesive based on a different resin. Its peculiarity is the possibility of use not only indoors, but also outdoors.

Construction plywood is indispensable in construction. Construction means the construction various designs using plywood, be it the ceiling, floor, wall, etc. Typically, plywood is a rough material that defines the look and shape of a structure, then it is given a cleaner finish.

This plywood is thicker than other types to give it the necessary rigidity and reliability.

Advice!
This type of material is popular due to its lightness, which makes it possible to use of this material in all types of residential building structures.

The abbreviation DVP means "fibreboard". This building material is obtained by hot pressing and subsequent drying of wood fibers. The woodworking industry generates enough large number wood waste, which is crushed and a fibrous mass is obtained, from which fiberboard is prepared. Depending on what kind of wood the waste was used from, the material gets its specific color.

Fiberboard is a very common building material; its surface is smooth and durable, at the same time it has the necessary flexibility.

Here is an example of a list of advantages of the material:

good for sawing,
due to its light weight it is not difficult to attach it to the floor and walls,
has good sound insulation.

Everyone understands that plywood is sold in standard sizes, and for work its elements are required in the most different forms, and not only rectangular ones. Therefore, a person using this material must know how and with what rectangular standard sheet give the desired shape.

The easiest way is to take the necessary measurements at the construction site, visit a carpentry workshop and order the necessary plywood figures. However this method, naturally, will require additional financial costs, in addition, it does not fully correspond to the task if you build a house with your own hands.

Laying plywood on the floor has several nuances. Depending on whether the floor is laid on a wooden or concrete floor, the thickness of the material is determined. When laying plywood on a wooden floor, the defects of which are hidden, it is enough to purchase plywood with a thickness of about 10-12 mm. Minor differences in the level of the boards will be perfectly hidden and will not be noticeable.

When laying plywood on concrete base The logs are pre-laid and leveled to zero. In this case, the thickness of the plywood must be at least 15 mm to ensure that the load is maintained and there is no deflection.

In construction, to give plywood the required shape, a blade with a fine tooth is placed on it. After cutting with a jigsaw, the edges of the figure can be further processed with sandpaper. At the same time, it is almost impossible to make curved shapes with a jigsaw; for this, a circular plate is used.

Advice!
If you don’t have a jigsaw or a circular saw, you’ll have to work the old fashioned way with a hacksaw, but to do this you should sharpen the saw properly and be very careful not to break the cutting line.

Plywood house

Are you planning for yourself or your children? Each of us built a hut in childhood, and you know that your child will be delighted if he has his own small house for games. Of course it's better to use quality plywood. When starting construction, you should draw up drawings of the future house.

If construction is taking place for a child, then it is better to build the house in or next to the children’s room so that the child can be under control.

Advice!

You should think about what kind of plywood to use for construction and required quantity sheets. If the house is supposed to be built small and light, then the thickness of the plywood should not exceed 10 mm for it to work.

When determining the thickness of the material, it is necessary to take into account the load on the plywood, avoiding its maximum possible bending. If you have sufficient financial resources, you can also purchase a laminated type, which has a more aesthetic appearance and does not require painting.

After preparing the material, we make markings on sheets of plywood, draw windows and a door. When planning the placement of windows, you must strive to larger size so that the house is light. Height doorway must exceed height.

If the necessary lines are marked, you can proceed to cutting out the blanks.

Advice!
Once the pieces are ready, you should use sanding paper to sand the plywood and process the cut edges so that the chips do not damage your hands. It is better to join plywood using metal corners and self-tapping screws, since the use of a timber frame will significantly increase the cost and weight of the object.

Once the walls of the house are assembled, you can move on to installing the roof. When installing this part, it is necessary to maintain a certain angle of inclination, eliminating the possibility of children being on it.

When there are dolls in the house, but they have no housing, the child, sooner or later, will ask his mother a question: why? And rest assured, there will be a lot of arguments in favor of the fact that the problem needs to be eliminated. There will be two solutions: either buy this housing, or make a dollhouse with your own hands. Buying, of course, is easier - in toy stores you can find a large model of a house made of chipboard, assemble it at home step by step and paint it. But everyone wants everything for their child to be exclusive. All that remains is to figure out how to build this exclusive house with your own hands from plywood, cardboard, paper or other material.

A do-it-yourself dollhouse will delight the child and give the mother a reason to be proud

First of all, you need to decide on a list of tools and materials that will be used in the manufacturing process. The house, even if it is a doll house, is a home. Let's treat the process with respect and begin the master class.

So, you should have on hand:

Plywood (7 mm).
Electric jigsaw.
Mounting tape.
Glue.
Corrugated cardboard (roof).
Self-adhesive film for design research (floor).
Beautiful wallpaper that will be used to cover the walls.
Several pencils (simple), a ruler, a tape measure.

After the working kit is assembled, you can begin “construction”.

Initially, the plywood is cut into sheets according to the sizes indicated in the diagrams presented in the master class.
Take your time and carefully cut out windows and door openings one by one.
The end parts of the cut parts must be glued with glue and the structure must be mounted exactly as indicated in the diagram.
You can play it safe by nailing down with small nails those parts that can be nailed down. This will make the house better secured and gain reliability and greater stability.
The next stage is the manufacture of the roof. After it is laid, corrugated cardboard should be glued to it.
Only design work: you need to decorate the walls with wallpaper, and the floors with a beautiful tape - self-adhesive.
The rooms are furnished with furniture and all sorts of useful things. Don't forget the TV - dolls also love watching TV series.
Next comes the main action: the housewarming of the child's little friends into their own toy house.

This simple master class clearly showed that nothing is impossible when there is a desire to bring joy to a child in order to see his satisfied smile.

Gallery: DIY dollhouse (25 photos)

How to make a house for dolls (video)

How to make a dollhouse out of cardboard: diagram and description of the process

Cardboard is a universal material. It seems to be designed so that people do not spend money on expensive ready-made things, but can make something with their own hands. The same is true with the toy house. All the ideas for making it will not fit into a huge book, but what is easy and quick to do is worth considering below. Involve your girls so that they feel the power of the moment - because they take part in the fate of their dolls. This will instill in them a sense of responsibility.

In order to create something like this small miracle for a child, you will need the following:

durable cardboard (any size box, individual sheets);
paints, pencils;
colored appliqué paper, some ribbon cuttings, something that will never be used again, any other decorative elements;
glue gun;
tape, preferably construction tape.

Cardboard is a universal material

Next you need to decide on the sizes doll's home, with a roof (will it be removable or stationary), how many rooms will there be (will they be isolated or adjacent). You need to start from the number of rooms and floors.

Additionally, you can build a staircase between floors.

Each room is either covered with wallpaper (there is always a piece of old wallpaper in the house), or give free rein to the child’s imagination - let him decorate the walls with paints or pencils the way he wants to see the world of his dolls. All that remains is to add any decorative elements, make cribs (even from matchboxes). The main thing is that it is clear that the house is suitable for occupancy and comfortable living in it.

DIY dollhouse out of the box: a master class for everyone

Of course, there are as many options for toy homes as there are people who want to build them. The proposed model of doll housing made from boxes is interesting, first of all, for its simplicity and the fact that it easily folds for transportation or any movement. No complex drawings required for manufacturing.

You will need the following:

large cardboard box;
large scissors;
scotch;
interior decoration elements

No complex drawings required for manufacturing

First you need to trim the top of the box (the diagram clearly shows all the steps). There is no need to throw away all the cut parts - let them lie aside for now. Next, the end parts (seams) of the box need to be taped with strong tape.
Turn the box over. Glue its elements where indicated by the yellow arrow on the diagram. From what is cut and set aside you need to make a roof. Connect the roof joints using tape, following the yellow arrows. The roof is ready. You need to attach it to the sidewalls.
Cut the cardboard along the yellow dotted lines on the diagram. Connect as shown by the arrows in the diagram.
Remains interior decoration. It all depends on the preferences of the girls. To begin with, you can simply lay out a blanket, put a pillow, and you can celebrate your “Barbie’s” housewarming.

How to make a room for a doll - let your imagination go!

First, decide what should be in the room.. The basic necessities are sufficient. Then the child will figure it out on his own and finish everything the way he wants.

Bed and bedding. . The simplest option- several matchboxes connected to each other and covered with fabric. All that remains is to sew a small pillow and put a small flap on top thick fabric- the blanket is ready.
A TV can be easily made from a small box or from the same matchboxes that are universal material. Cover the box with plain appliqué paper, and stick a picture from a magazine or a sticker of a suitable size on the front.
A coffee table made of thick paper will find its place in the room. You can glue several pieces of paper onto it - these will be magazines and newspapers.
Chair, armchair. They are also good to make from matchboxes covered with fabric. The legs can be made round by gluing, for example, unnecessary beads to the bottom.

Ennobling your own suburban area, the owners apply all their imagination to this. Well-groomed paths, gazebos and terraces - all this is good for spending time with an adult family. But we can’t forget about children: themed games for fresh air will have the best impact on their health. In addition to the sandbox and swing, you can build a house for your child out of plywood with your own hands. There you can hide from short-term rain and come up with new entertainment.

A plywood house will decorate the area and make the child’s games fun and varied.

Construction takes little time and is not too expensive. First you need to draw a sketch of the future house on paper. Given the scale, you can immediately determine the required amount of material. You should immediately calculate the location for construction and take into account that the tree should not be in the shade or damp. During operation, the parts will be coated with protective compounds. But this will not save if the children's area is constantly in contact with moisture. The question of how to make a house is not difficult if you purchase everything you need at once.

As an option for building a children's house, you can take doll models from your own child's toys. In addition, look through all the sketches and models offered by the Internet, or come up with your own.

Materials for work

To make a house you will need a jigsaw, a knife, a tape measure, self-tapping screws, and a screwdriver.

Plywood. Its thickness varies from 8-12 mm. Based on the drawn sketch, it is summarized total area parts and the required quantity is obtained if converted to standard sheets.
Beam. A section of 50*50 mm should be sufficient unless the owners intend to build a permanent residential building.
Soft tiles according to the size of the house roof.
Plexiglas or plexiglass. Such windows will be safer than real glass.
Beads for inserting windows.
Fasteners These can be either nails or self-tapping screws. It is desirable that they are made of stainless steel. The length is selected in accordance with the thickness of the plywood so that sharp ends In no case did they protrude outside - children climb everywhere, and injuries are unacceptable.
The hinges are also stainless, for window and door shutters.
Coating compositions – paints, varnishes, water-repellent mastics, etc. All chemistry must be on water based and have special markings. Volatile solvents and alkyd paints should be avoided - their compounds are dangerous to the health of children.

The process of making a plywood house.

hacksaw, jigsaw;
screwdriver;
hammer;
emery wheel or grinder;
brushes, rollers, trays, spray gun;
funds personal protection– glasses, respirator, gloves;
vacuum cleaner for cleaning.

Return to contents

Stages and features

When creating a house on paper, you need to take into account the age and height of the child. The theme of the “hut” depends on the first one - a big child, especially a boy, will want something fantastic or courageous, unlike little ones, who still delight in a fairy tale. The size of the building depends on the second condition - the child should not crawl into it. And an adult should get there without hindrance. You need to enter with a slight bend. Optimal sizes The door height may be 30 cm higher than the child’s height and the roof slope may be at least 45°.

Drawing of a children's house made of plywood.

A hacksaw is used to cut off pieces of timber for the future frame. All parts are cleaned sandpaper or by car and soaked protective composition from mold and mildew.
After this, the parts are cut out of plywood. If the design of the house is simple, like a box, then you can use an ordinary saw, but, as a rule, parents want to admire and create something unusual, so the parts can be wavy, round, and others. An electric jigsaw will come in handy here, allowing you to cut out any shape. Plywood elements are also cleaned and processed protective coatings. Considering that there will be a lot of construction dust, it is not a bad idea to use a vacuum cleaner and put on a respirator.
While the parts of the future house are soaking and drying, you need to prepare a place for the building. It must meet several requirements: be visible; located in a dry place without shady or tall vegetation; located so that the area reserved for children's entertainment can also accommodate a sandbox with a swing.
The ground is cleared of grass, covered with a layer of sand or expanded clay with limiters made of wooden planks. To protect the bottom from moisture, you can lay rubber or foam. The orphanage can also stand on supports, which will provide additional protection from contact with moisture.
Construction of the frame. There is no special wisdom, you just have to take into account the width of the plywood parts and thus build a frame with a certain pitch of the beams. Children's house does not provide for being in it in cold weather, so we will not talk about any insulation. A layer of plywood with outside. Of course, when creating a plywood house, some make it in the form of a miniature copy of the real thing, but this is for people who are passionate about the idea. If the owners are like that, you can dare and follow the instructions for building a real house.
After the frame of the building is ready, construction of the roof begins. It should be gable and with such an inclination that it would be a problem for a child to climb into it. Flat ones are not recommended: jumping on the roof can break it and injure yourself. The work of installing the roof is also simple: they make the main frame from beams, then fill the sheathing, with a step corresponding to the width of the plywood sheet. After covering the roof, it must be covered with rain-protective material. Corrugated sheeting or slate are absolutely not suitable, they are heavy and the edges are sharp. Ruberoid or other chemical coating due to heating sun rays will emit pungent odors - this is suitable for a residential building, but not for a children's building, due to the lowness of the structure. You can splurge on soft tiles– it is safe from any side and you only need a little of it.
The frame is sheathed with ready-made elements using a screwdriver or hammer. It is necessary to ensure that the sharp ends of nails or screws do not protrude. If this does happen, the excess is cut off or filed off with a file. After covering, you need to seal all the cracks and joints of the plywood to avoid drafts. Suitable for this: polyurethane foam, as well as any other sealant. Unclean marks can be cut off after curing.
After all the work done, the structure must first be primed, and then it can be painted. It is very convenient to use a paint sprayer or balloon options inside. Outside work is done with brushes and a roller. Coloring orphanage A great way to get your child involved in work. Having come up with a plot together, you can draw the outlines of a fairy tale or characters, allowing your child to color it later. Can be pasted over orphanage all sorts of posters from his favorite comics. And then coat them with varnish. There are a lot of ways to decorate – which one to choose, the child will decide for himself, because this is his territory