For decades, components for PVC windows have been actively developed and improved, but always included approximately the same elements. Regardless of the manufacturer and model of the plastic window, there is a certain set of components and accessories in the composition, which are useful to understand before ordering the product.

For the production of metal-plastic windows, they use a chemical product protected from moisture, cold and ultraviolet radiation. Inside the profile, there is necessarily a metal reinforcement, which gives the structure additional strength and durability.

The thickness of the window sash is determined by the number of air chambers provided in the double-glazed unit of a particular model. For operation in temperate and cold climates, it is better to choose 2-chamber and 3-chamber, and for hot countries - 1-chamber double-glazed windows. If increased protection from street noise is needed (for example, the windows overlook a busy roadway, or the house is located near railway tracks), the number of cameras should be increased.

The set of PVC windows includes the following elements:

• Frame - a fixed element located around the entire perimeter of the window. It is mounted in a window block, consists of a PVC profile and a reinforced frame inside;
• Leaf - a movable part of a metal-plastic structure, attached to the frame and opened by a fitting mechanism;
• Impost - divides the frame into several parts. For example, one half before the impost can be deaf, and the second - opening;
• Bead - a plastic component necessary for reliable fixation of a double-glazed window;
• Double-glazed window - occupies most of the PVC window, consists of several glasses and sealed air chambers between them;
• Fittings - all the mechanical elements in the composition of the window, responsible for its opening. Can support various ventilation modes and be supplemented with an internal lock;
• Sealing rubber - provides additional sealing of the window due to the tight joint of the sash with the window block.

Optional plastic window accessories:

• Low tide - placed on the outside, serves to remove precipitation and moisture;
• Slope - located on the inside of the window opening, invariably deformed in the process of replacing the window with a new one. Therefore, after installation, it is necessary to finish the slopes, which perform not only an aesthetic, but also a protective function: it is thanks to them that the installation seam does not collapse over time;
• Window sill - installed under the PVC window, above the heating battery. It should be borne in mind that the window sill should not completely cover the battery, otherwise drops of moisture (condensate) will appear on the glass surface;
• Insect net - stretched over the double-glazed window and serves to protect against mosquitoes, flies, leaves and fluff. Recommended for installation in rooms where there are pets and small children. It happens both removable (seasonal) and permanent.

Before buying a plastic window, consider the availability of all necessary components and accessories, as well as consult the manufacturer on related issues. And remember: it is always better to overpay for a full set of components than to buy and install something on your own in the future.

The complete set of plastic windows of our production allows us to satisfy the wishes of each client. Plastic windows have established themselves as strong, trouble-free, practical products, which are characterized by improved noise-reducing and heat-insulating characteristics. For many years, our company has been offering numerous customers the production and installation of reliable window structures for glazing houses, loggias, apartments, cottages and balconies. We supply exclusively high-quality metal-plastic profiles and excellent fittings that meet the latest standards.

What do we offer with the sale of PVC windows

We offer you to order metal-plastic windows with glazing of any type. We try to make products accessible to everyone, so we make plastic windows for Muscovites in different budget ranges: from cheap to ultra-modern designs with energy-saving features, tinted glass, etc. The complete set of plastic windows may differ depending on the functions performed.

The sale of PVC windows is complemented by related services. The company's employees carry out a wide range of finishing and installation works, which include the installation of window sills, slopes, ebbs, and other accessories. We do not just sell windows, but we can also realize glazing of any level of complexity.

Advantages of our PVC windows

• Silence.

  Our windows will perfectly protect you from noise and frost. Our products will take the hectic and buzzing city out of your home.

• Coolness in hot weather.

  Thanks to a special coating, the glasses reflect most of the infrared rays, which is several times more effective than ordinary glass and is comparable to heat protection when the blinds are closed.

• Keeping warm during cold weather.

  In the winter months, PVC windows significantly reduce heat loss in the room. With them, the room cools down not so quickly.

• High security.

  Our PVC windows are absolutely not dangerous to the body. Special material does not cause allergic reactions, and special latches ensure the safety of the child.

Production of PVC windows in Moscow

Having our own production helps to reduce the cost of products and guarantee high quality to our customers. We work without intermediaries, therefore, we exclude senseless overpayments, allowing numerous customers to save.

Production of PVC windows on order provides an opportunity to obtain translucent products that are original in terms of characteristics and functionality. In the production of each window, our employees take into account the requests and personal desires of the client, such as:

• the number of chambers in double-glazed windows;
• profile size;
• shade and style of profiles;
• opening method and number of doors (sliding, turning, tilt-and-turn, folding).

Advantages of our company

WINDOWS DIRECTLY FROM THE FACTORY
we have high-quality PVC windows without intermediaries
and overpayments

WIDE RANGE OF
PVC, aluminum, different colors, selection of fittings

DESIGN OF ANY COMPLEXITY
individual approach, production of windows of any complexity

COMPLETE QUALITY CONTROL
quality control at each stage of work

WARRANTY 5 YEARS
we have the biggest guarantee on installations

MORE THAN 19 YEARS ON THE MARKET
100% quality, guarantees, great experience

Advantages of purchasing plastic windows in our company

"Window Technologies" is a well-known Moscow company that specializes in the production and installation of PVC windows. Among the advantages of our company are:

• Top quality windows.
• Professional and prompt removal of old and installation of new windows.
• Reasonable prices, bonuses, gifts, discounts.
• Free measurement and transportation in Moscow.
• Warranty.
• The widest choice of material, fittings and accessories.

Installation of metal-plastic window structures is carried out by experienced specialists. The correct configuration of plastic windows allows you to get the maximum effect of saving heat. A huge stock of experience in the field of production, installation and repair of metal-plastic windows allows the employees of the Window Technologies plant to work quickly, accurately, without making mistakes.

When buying windows for a house or apartment, it is very important to choose the right equipment. Only a well-chosen window system will be able to fully perform the full range of functions assigned to glazing.

Choosing a complete set of window systems should begin with a double-glazed window. This translucent element occupies up to 80% of the total window area and is of great importance in providing the insulating capabilities of the window structure.

The most popular type of double-glazed windows used for installation in residential premises are two-chamber structures. Three sheets of glass, combined into one translucent structure by means of spacers and sealants, are able to provide professional insulation and reduce the risk of condensation inside the structure to a minimum.

When glazing private houses and apartments on the ground floors, special attention should be paid to security, since the possibility of unauthorized entry through the window opening is very likely. In order to ensure the safety of your own home, it is necessary to install double-glazed windows with the so-called impact-resistant glass or triplex. Such glass is pasted over with a special film, which increases the strength of the double-glazed unit several times.

The most exploited part of the entire glazing system is the fittings. With increased sizes of window openings, an increased load acts on the opening systems. In order to ensure the functionality and long-term operation of glazing systems, it is necessary to use a complete set of opening systems, handles, locks and other glazing elements from manufacturers who have many years of experience. Opening systems of such manufacturers have received excellent reviews from consumers and are distinguished by high quality materials and excellent performance data.

	The products of German manufacturers ROTO and MACO have excellent performance and popularity among a huge number of consumers.
	These brands have shown themselves well in the market among similar products and have excellent reviews from consumers around the world.
	Currently, the products of these companies have an assortment of several thousand window elements.
	Here are various opening systems and locks and anti-burglary elements that allow you to keep your home inviolable.

An invariable element of each window system is the window sill. This is an additional item of glazing and glazing functionality. It can favorably emphasize the quality and uniqueness of any window. Modern window sills can also perform load-bearing functions, which allows you to create your own green corner in each apartment.

	These elements are also a necessary part of any window system.	In addition, this element should not differ in external geometry from the facade of the building.
	A high-quality slope should complement the interior of each window, while organically fitting into the overall design of the room.	Do not forget about the functionality and performance.
	The window tide should limit the access of moisture to the lower mounting seam, it also serves to drain rainwater.	Proper installation and use of quality materials will provide all the necessary functional qualities and resist external aggressive influences.

Our company manufactures and installs a full range of window elements to ensure the functionality and appearance of the window structure. Leave a request for a call back and our managers will provide you with professional advice on the choice and cost of glazing accessories in your particular case.

In addition to the window block, the glazing system includes other elements. These include slopes, ebbs, window sills, finishing corners and various accessories. Additional components are selected taking into account the parameters of the window, the concept of the interior design of the room and the wishes of the customer.

window sills

They give the structure a finished look and are characterized by increased strength due to the presence of stiffeners. Other benefits of plastic window sills include:

• resistance to mechanical damage, exposure to sunlight and moisture;
• ability to withstand high temperatures;
• ease of maintenance and care;
• reasonable price compared to products made of wood, natural or artificial stone.

Plastic window sills are not subject to shrinkage and can be installed in rooms with high humidity. A variety of decorative design allows you to choose a structural element in accordance with the style of the interior.

low tide

They are installed on the outer side of the windows and serve to protect the assembly joints from excessive moisture. In addition, tides give the building an aesthetic appeal and complete the architectural ensemble. For their production use:

• aluminum, which combines lightness, wear resistance and strength;
• 0.5 mm thick galvanized steel, which is not subject to corrosion and dampens vibrations due to the rigidity of the structure.

Low tides prevent the appearance of mold and fungus indoors and increase the life of the window.

slopes

They are used as a finish, with which they decorate sections of the wall adjacent to the window profile. In addition, slopes perform the following functions:

• mask assembly seams;
• prevent moisture ingress and condensation;
• provide a high level of tightness and thermal insulation of the structure.

For their production, sandwich panels are used, which consist of two sheets of PVC and polyurethane foam filler between them. They have a long service life and are easy to clean from dust and dirt. Slopes made of plastic are resistant to mechanical damage and retain an attractive appearance under the influence of sunlight.

Mosquito net

Designed to protect the interior of an apartment or a private house from large particles of dust, sand, poplar fluff and insects. The design of the product is a frame with a mesh stretched over it. The frame is an aluminum profile painted with a special composition using powder technology. Protective decorative metal coating prevents corrosion and is resistant to atmospheric and chemical influences. The mesh is made of a durable polymer, which contributes to a long service life of the structure.

Depending on the technical characteristics and purpose, mosquito nets are:

• standard;
• with a high-strength canvas that prevents cats from falling out of the window.

Mosquito nets do not require complex care: it is enough to wash them 1-2 times a year with a soft sponge and a product that does not contain abrasive substances. At the end, remove the remnants of the cleaning agent from the canvas under running water.

Combs

Serves as a limiter and is used to regulate window sashes. The use of combs provides a number of benefits, including:

• protects against unauthorized opening, which is very convenient in the presence of children and pets;
• allows you to ventilate the premises without fear of intrusions of strangers;
• provides the ability to change the intensity of fresh air intake and avoid drafts.

The limiters do not harm the window profile and fix the sashes, preventing them from hitting in windy weather. They do not require special care and do not violate the tightness of the window.

The least successful arrangement of windows is considered if the openings face strictly to the south or exclusively to the north. As a result, it is recommended to avoid buying such real estate. A useful and interesting review with practical recommendations has been published on WindowTrade, allowing you to choose housing with the optimal arrangement of windows. However, it is far from always possible to follow the advice, so this article will help minimize the negative consequences of openings facing north or south.

What if the windows face south

First of all, you need to understand that a competent approach to completing window structures will provide comfortable conditions for living and working even in adverse conditions. In addition, such an arrangement of openings has not only disadvantages, but also advantages:

• the maximum possible amount of natural light that enters the interior during the daytime;
• saving on heating due to solar energy.

The main problem of rooms with south-facing windows is overheating of rooms in the summer. Also, due to long-term exposure to UF radiation on a permanent basis, furniture and other interior premieres can fade in the sun in the rooms. It is recommended to deal with such manifestations in a complex way using the following solutions:

In some cases, buyers choose stained glass or electrochromic windows for blackout. The second option is more preferable, as it limits the flow of sunlight only in those moments when it is necessary for the property owner.

When buying windows from a profile painted in mass for installation in south-facing openings, you need to be extremely careful and careful. The fact is that a dark-colored profile heats up faster and can be deformed during operation if it was made of low-quality polyvinyl chloride. As a result, in such situations, it is recommended to choose windows with light-colored bindings. The same applies to products made from a laminated profile - a dark film in combination with low-quality plastic is guaranteed to provoke deformation of the window structure.

Tips for property owners with north-facing windows

In this case, the choice of windows is mainly influenced by the ability of structures to retain heat and let in the maximum possible amount of daylight. To achieve the desired effect, it is recommended to use:

• double-glazed windows with inert gas - they best retain heat in the interior;
• 5-chamber reinforced profile of small width - window casings with narrow lintels let in more light, and a large number of internal cavities improves the energy efficiency of the entire structure.

It is also recommended to insulate the external and internal slopes well. These elements of openings are additional cold bridges, therefore, to minimize heat transfer through these zones. In some cases, it is recommended to use heated double-glazed windows. These models significantly reduce heat loss and help save on heating.

Particular attention should be paid to the correct installation of windows. A lack of sunlight on the north side often results in damp exterior walls. If, then the whole structure "breathes" and does not let moisture through, so that condensation does not fall on the double-glazed windows, frame and slopes and mold does not form.

The location of the windows should not affect the basic configuration of the structures. Regardless of which side the opening faces, windows must provide the possibility of trouble-free ventilation of the premises. To do this, they are equipped with a tilt-and-turn opening system. However, sometimes this configuration is not enough to create comfortable conditions, and additional integration of supply ventilation valves or micro-slot ventilation devices is required. For more efficient control, the valves are equipped with sensors that control the temperature and humidity in the interior. These measures can significantly reduce the likelihood of condensation and ventilate the rooms even in winter.

Wide window sills do not allow warm air from the radiators to rise, which leads to large heat losses and abundant condensation. To solve the problem, it is necessary to insert special gratings into the window sill.

In addition to the possibility of ensuring a constant supply of fresh air, the soundproofing of windows plays an important role. Even when the openings go to the quiet side, experts advise taking care of a high level of sound absorption. The best sound insulation for windows with double-glazed windows, into which an inert gas is pumped. However, the problem can be solved with the help of special polymer films. At the same time, it is important to know that deterioration provokes not only high heat losses, but also reduces the level of sound absorption of windows, so you should always monitor this parameter.