This piece of furniture is one of the most versatile in use. The table can be a dining room, a utility table, or installed in a living room, on a veranda, on a property, in a workshop, and so on. In a word, it is impossible to do without it. But many people are not satisfied with purchased products in terms of a number of parameters - size, design features, form or for any other reason.

Considering that wood is relatively easy to cut and sand, make a table from it according to your own drawing, with your own hands for good owner no problem. And it will come out much cheaper. Plus - satisfaction from such work.

Room

Ideally, this is an extension, a barn, an empty garage, although small area under a canopy. Working with wood on the site, under open air- means being completely dependent on the vagaries of the weather. If there are suitable ones for making furniture " square meters", then you should worry about quality ventilation in advance. Natural is sometimes not enough (besides, it depends on changes in wind direction and pressure), and a hood is installed.

Arguments that if you use protective equipment, you can work in a closed space do not stand up to criticism. Wood dust will immediately settle on everything, including the sample with which some action is being performed. Neither precise cutting along the line, nor high-quality surface treatment of wood (not to mention impregnation and finishing coating paint and varnish composition) cannot be obtained.

One cannot ignore the fact that many preparations used for wood processing contain toxic components. For example, varnishes, paints, impregnations: if they are not natural, then harmful fumes are guaranteed.

Tools

Their selection depends on the extent to which it is planned to “ennoble” simple design made of wood, what shape to give it and a number of other nuances. If the master does not lay claim to the elegance of a wooden table and does not aim to achieve its originality, then an ordinary carpenter’s set will be enough.

For more “delicate” work in the process of making a table of unusual shapes, external design special devices will be needed.

El/jig saw. It will not be possible to make an inclined vertical cut with a regular saw, keeping the angle precisely. The canvas will begin to “play”, and therefore the quality of work will be extremely low. An electric jigsaw is universal in use and also provides high precision cutting of wood or cuts in it.

Miter box rotating. The main function is to facilitate corner cutting. Such a device can either be bought or made. The thing is, without a doubt, useful in the house. An indispensable assistant for precise cutting of various workpieces. For example, plastic or wooden fillets (floor, ceiling), which are used to decorate any premises during the renovation process.

Sander. There are several modifications of this electronic tool on the market, and the criteria for its selection is a separate issue. A ribbon one is quite suitable for making a table. It is universal in use and is used not only for assembling furniture.

Hand router. If you need to make grooves, make holes, and in a number of other cases you cannot do without it.

Many of the listed devices can be rented if making furniture is not a hobby, but a necessity.

Impregnating and other compositions

Rot protection:

• Recycling machine oil is an effective, and also free, remedy. But not for dining tables.
• Flaxseed oil. A natural and effective product that penetrates deeply into the wood structure and protects it from mold and mildew. The downside is the high cost. But if the table is intended for eating, this is a great option. The drug has no color, therefore, after processing lumber, it does not leave any traces in the form of darkening, stains, or streaks, unlike processing.
• Water-polymer emulsion. It is characterized by long-lasting action and safety for health.
• Acrylic varnishes. They have practically supplanted their predecessors in the “NC” category, since they are harmless and in many respects better compositions, which are diluted with solvents.
• PVA, bone glue and a number of others. More detailed information about carpentry compositions - .

To decorate a tree:

• Clear varnishes are used not only to protect the material from moisture. With their help, you can preserve the texture of the wood and shade it.
• Stains.
• Varnishes with a coloring effect (tinting).
• Paints (but only for wood!).
• Putties.

Using colorless varnish and pigments, you can make a coloring composition of any shade. It is enough just to correctly determine the proportion of components. This is easy to do by experimenting with mixing and applying a sample to a discarded board. This will allow you to choose an acceptable tone. It is more than advisable, since it is not always possible to purchase exactly what you need on the market.

Fasteners

It is better to ignore all advice on assembling a wooden table using nails (the reasoning is simple, quick and cheap). The reasons are as follows:

• The nail easily pricks dry wood (and this is exactly what is used; more on that below).
• It is quite difficult to direct its leg correctly (strictly vertically). In some cases, it is even more difficult to redo your mistake.
• A tree, even the most protected from rot, succumbs to it over time. The maintainability of a table knocked down with nails is extremely low. Practice shows that it is rarely possible to remove such fasteners without damaging adjacent structural parts. As a result, instead of the planned replacement of one element, 2–3 will have to be changed.

• When assembling a wooden table, if glue alone is not enough, you should use only self-tapping screws.
• Sometimes its individual parts (at joints) require reinforcement. Strengthening the strength with hardware with a thicker and longer leg is impractical. The reason is the same - the likelihood of the tree splitting. For these purposes, metal strips, brackets, and corners are used.

Features of choosing wood

Some people focus on the cost of lumber, others care about the wood’s resistance to rotting, and still others care about its texture. What can you recommend to a novice furniture maker? Do not use the same type of wood for a table unless it is intended to be installed somewhere in a utility room or garage. This is exactly what many novice “craftsmen” do, selecting the same type of boards and bars from what is left from construction or renovation and gathering dust in the barn.

When making a wooden table for a living space, veranda, etc., you need to take into account the properties of individual species. Naturally, if you do not have sufficient experience in assembling furniture, you should pay attention to more cheap wood. The first table (chair, stool) in your life is just a kind of training in making and gaining experience.

Tabletop. Here, strength and minimal moisture absorption come first. It is on this part of the table that something constantly spills. Optimal choice– pine, larch, oak (although the latter is more expensive). Thickness – at least 3 cm.

If the size of the countertop is small, then you can use wood-based slab products (OSV, OSV and the like). But only with lamination to prevent the material from swelling when liquid gets on the table surface. For example, chipboard.

Legs. Birch. It may suffer from moisture, but in terms of strength it is an excellent option. The optimal parameters of the blanks for the legs (in cm) are considered to be: length - about 76, cross-section - 5 x 5. Dowels. Acacia. It is much easier to find than the often recommended boxwood boards.

IN furniture industry low-grade lumber is not used. This is not economically feasible, since pre-processing wood increases the duration of the production cycle. But when making anything, wood of lower grades, substandard wood is just right. The same pallets left over after using stacks of foam blocks or bricks.

And not just because it is free or relatively cheap. Many of the disadvantages of such wood can be turned into advantages with the right approach. For example, after coating with colorless varnish, the tabletop acquires a unique, original look.

The main thing is that the boards do not have obvious defects in the form of rot, cracks, falling knots and wormholes.

If pine is chosen for the countertop (this also applies to many other coniferous species), then you need to pay attention to the location of the annual rings. These arches are called humps. The cuts of the boards show how they are oriented, and this is taken into account when laying them in a row. Samples obtained by tangential cutting are arranged alternatingly (one top down, the next one up); radial cutting - the same (with arcs in the same direction). The nuance is insignificant, but compliance with this recommendation eliminates the risk of warping and splitting of the boards.

For furniture, if you think about its durability, you should take only dry lumber. As wood shrinks, it will become deformed; This is a natural process, and its consequences in the form of twisting, warping, and bending are inevitable. Such a table will quickly become warped, and you will have to repair it. And here you need to decide whether to purchase highly dry wood or rid it of moisture yourself. The first option is simpler, but such a tree is more expensive. The second one will cost less, but there are a number of purely technical difficulties.

1. Firstly, it is necessary to ensure stable temperature regime at the place where the workpieces are stored. Changes in its value will lead to uneven evaporation of moisture, which will negatively affect the strength of the tree.
2. Secondly, good ventilation must be organized.
3. Thirdly, and perhaps this is the most unpleasant moment - you will have to wait up to about six months, depending on the initial moisture content of the tree. But this is not a guarantee that the result will be as expected; Even this requires practice.

This once again confirms the idea that when starting to make furniture from wood for the first time, you should focus on simple table for household needs from cheap lumber, without pretensions to its sophistication and originality of design. For example, for a barn, garage and the like.

Options and patterns of wooden tables

It should immediately be noted that any work related to the design and self-assembly- the process is creative. There are no stereotypes in this matter, so you can only take the model you like as a basis, and everything else - linear parameters, shape, manufacturing specifics - depends on the purpose of the product and your own imagination. Here are just a few examples of what wooden tables can be like. For example, for summer cottages and small utility rooms, it is worth choosing structures whose geometry can be easily changed - folding, camping, hanging, garden, level, and so on.

Tables that are supposed to be used for eating, games, as coffee tables for installation in living rooms intended purpose, they are made stationary, that is, unchangeable in size. These assemblies are more “solid”, since all articulated parts are rigidly fixed; no hinge joints.

Features of assembling wooden tables

If a person undertakes to make something, it means that he knows how to use tools, read blueprints and work with lumber. Such home handyman There is no need to learn the basics of carpentry. But it would be worth noting a number of nuances when making a wooden table. These notes will only help in the process.

Let's start with the types of connections. There are quite a few of them, but for a table that you assemble with your own hands, the ones listed below are quite enough.

On the dowels

In this case, the parts are fastened by placing them on an adhesive composition (Fig. 1 – 3).

The nuance is that to make the “cylinders” that are inserted into pre-drilled “channels”, a tree of a denser structure than the table elements is taken. This is what ensures the strength of the connections. Before installing them, chamfers are removed from the edges of the dowels and holes.

These round sticks are available for sale in any furniture showroom, several standard sizes. Grind them out, even having carpentry machine- an irrational waste of time. It is not recommended to purchase plastic dowels for the table; they are used for detachable connections. For example, frame furniture (walls, multi-level shelving, etc.).

You should not use nails to fix table elements (Fig. 4). Metal and wood differ in the degree of thermal expansion. Such a connection will not last long - it will begin to “shatter”, especially if the table is intended to be installed on the territory or in an unheated room.

On the kings

It is advisable to make such connections if the table either has to be disassembled periodically, or without this it is impossible to move it through the doorway. Although not all drawers require dismantling the structure. The most commonly used options are shown in the figures.

Bolted

Such connections are used mainly for garden furniture or those installed in extensions; for utility tables. An example is shown in the figure.

The nuance of working with fasteners

In order for the self-tapping screw to be easily screwed in and “go” in the desired direction, a hole is first made at the point of its installation using a drill with a diameter slightly smaller than the fastener leg. The main thing is to withstand the coincidence center lines, that is, to prevent distortion. In this case, to “plant” the screw, you can do without a screwdriver.

Features of wood processing

Everyone knows that a plane is used first, an abrasive with a large grain, and then a fine one. But sometimes it turns out that the last stage, polishing, has to be done many times. Much depends on the type of wood and the degree of drying. After applying the first layer of varnish, the fibers may “stand up”. There's nothing wrong with that. You should wait for the workpiece to dry and repeat its processing with abrasive. The work is painstaking and takes time. But it is precisely this method that can bring “problem” wood to ideal “smoothness.”

To eliminate the risk of injury to a person, all edges and corners of the table should be slightly rounded.

Features of external decoration

• Minor defects in the form of cracks and chips are eliminated with putty.
• Once sanding is complete, all wood dust must be removed. IN in this case an ordinary one will help out household vacuum cleaner with the appropriate nozzle. It is recommended that after such cleaning, wipe the entire table with a slightly damp cloth, let it dry and repeat removing any remaining dust. After this, you can safely start applying stain or varnish - there will be no “pellets” on the wood.
• You can add originality to the table not only with the help of curly cutouts, an unusual shape of the tabletop or legs, a combination of textures of different species, and so on. One of good options– artistic painting.

And finally. Work on self-production something made of wood (the same table) - just initial stage mastering the skill of “designer-assembler”. Having developed technologies and techniques on wood and acquired the necessary skills, it is enough to simply switch to other materials - metal, plastic, glass. So the benefits of a wooden table made even according to the simplest drawing (besides the pleasure of work and money saved) are obvious - time not wasted.

A DIY kitchen table is both an opportunity to save money and a way to provide a kitchen unique furniture, fits perfectly into the available space. However, it is important to correctly determine the dimensions and shape of the future structure.

How to make a wooden dining table

A table made of solid wood is beautiful, natural and, as a rule, expensive. But you don’t have to buy such a table, because you can make it yourself with no less quality and for much less money.

So, to make a dining table with your own hands you will need:

1. 4 pcs. baluster legs for the table, 73 cm high and not too thin;
2. For countertops: 4 dry edged wooden boards 1 m long (for a table 60 cm wide);

1. For the frame: 2 boards 80 cm long and 2 boards 40 cm long.

Prepare your tools: plane, grinder or grinder, jigsaw for cutting boards, circular saw, drill (with 8 mm drill bit), screwdriver, sandpaper, self-tapping screws (30 mm), wood glue, dowels, clamps (preferably). And, of course, a pencil, tape measure, gloves and safety glasses will come in handy.

For finishing The table will need varnish, stain or paint along with a primer. First we'll make the tabletop. To do this, you need to adjust all 4 boards as accurately as possible to the same length - 100 cm. If your boards were not sawn on a sawmill, then they also need to be trimmed in width and thickness. Then they need to be carefully sanded with a plane. The better you sand the wood, the smoother the countertop will be. Finish the edges well so that the boards fit together as tightly as possible.

We will connect the boards not with screws and nails, but with glue and dowels (chops). To do this, we make identical marks on the edges of all boards in increments of 10-15 cm and drill holes for the dowels with an 8 mm drill. Then we sand the edges and apply wood glue to them and into the holes made. Now we drive the chopsticks treated with the same glue into the holes and connect all 4 bars one by one. We remove excess glue on the surface with sandpaper and sand it, as well as all edges, with a plane. At this stage, you can go over the countertop with a metal sponge to give the wood texture.

So, the tabletop is ready. Now you need to fasten the legs and make a base for it.

To do this, you need to evenly fasten the balusters with short transverse boards with glue and screws. The glue dries for at least 12 hours.

We attach the legs to the long crossbars and drill holes in them in order to install the tabletop later.

After the glue in the frame has dried, you can begin installing the tabletop on it (frame).

If you want to make the table longer and wider, then you need to strengthen the table with two additional cross bars, as shown in the photo.

So, the table is almost ready, all that remains is to treat it with varnish or stain, or paint it, having previously primed it.

What color should I paint the table? Based on personal preferences and the color of the rest of the furniture. Below is the most universal option– the tabletop and legs are covered with stain.

You can see the main mistakes in staining wood with your own hands in this video.

If you like gloss, then the surface of the table can be covered with stain, and on top - with varnish (example in the photo below), or simply coated with varnish.

You can paint the legs white, and cover the tabletop with stain to get a design like the one in the next photo.

How to make a kitchen table from chipboard

DIY kitchen table from laminated chipboard- it's practical and budget solution. These countertops are covered with decorative plastic that is abrasion-resistant. IN standard version The dimensions of the tabletop sheet are 3000x600x36(26) mm, but today it is not difficult to purchase a sheet of chipboard cut to the required dimensions or negotiate at a furniture workshop to sell suitable trim.

You will also need:

• Connecting and end strips;
• End edges;
• Ties.

Even if you purchase a countertop of suitable dimensions, you will need to additionally process the ends - this will make the result more attractive and also protect the base from moisture. For these purposes, you can use a special furniture edging PVC-based or glued edge tape. The option with edging is considered more practical for dining table and suitable for DIYers.

For a kitchen table you will also need appropriate supports - you can buy legs separately or give preference to a ready-made base. It all depends on which option your drawings provide. The most common option is round legs D = 60 mm and height 71 cm. They can be collapsible, height adjustable, and also vary in design - matte, painted, shiny.

In our case, these will be chrome-plated shiny rod legs with a diameter of 60 mm, as well as a white tabletop Chipboard thickness 36 mm and a white plastic mortise T-shaped edging with girths is matched to it.

So, how to make a dining table with a chipboard top:

1. Markings are applied to the material according to the drawing. The corners must have a radius of 60 mm or more.

1. The tabletop is shaped using a jigsaw.

You should use a saw with reversible teeth, otherwise the plastic coating may chip. First, the corner of the chipboard is cut with a jigsaw with a margin of 2 mm, and then it is finally rounded with a grinding machine.

1. The groove for the furniture edging is milled.

1. The edging is getting stuffed. Before this, the ends of the product must be covered silicone sealant. The sealant is placed both in the edging and on the top edge of the tabletop. A rubber mallet is used to fill the edging. After which the excess sealant is removed.

1. The legs are attached. To do this with reverse side The tabletop is marked with a pencil. In most cases, the legs are placed 100 mm from the edge.

To fasten the holders, use self-tapping screws countersunk head about 20 mm long. After this, the legs are put on the holders and secured with a hex key - that’s it, yours new table ready.

How to correctly determine the dimensions

Using the principles described above, you can make tables larger or smaller in length and width. How to choose the optimal size for your family?

If we are talking about a standard kitchen with dimensions from 6 to 8 squares, then the drawings will show a typical design with a height of 750 mm and a perimeter of 800 * 500 ... 1200 * 600 mm.

A DIY dining table should be designed for a certain number of people. Usually it corresponds to the number of residents - 3-9, but a couple of free places are still added for guests. For large companies good decision will become .

Calculations are carried out as follows: multiply the number of people by 60 (“working” perimeter per person). As for the width of the tabletop, here we follow the recommendations of experts - its optimal values– from 800 to 1100 mm. Narrow tables are difficult to serve, and wide tables are uncomfortable for those sitting.

If you decide to do kitchen table oval (round) with your own hands, you will have to calculate the circumference - diameter * 3.14.

Form selection rules

The shape of the kitchen table plays a significant role in the perception of space. Universal design - rectangle or square with right angles. It is balanced and can be installed close to the wall or in the center of the room, saving space.

Oval models are also quite comfortable and beautiful, but they are not very spacious - the largest product can accommodate no more than 8 people. In addition, they require large areas– more than 8 sq. meters, because you can’t put them against the wall.

It can also be called a universal and traditional option, suitable for both very and large kitchen. But it has less capacity than a rectangular table.

The best option is rectangular table with rounded corners. We have already described above how to make just such a table from chipboard with your own hands.

Rules for caring for furniture

After the dining table is made, you will need to take care of the long-term operational period products.

Thus, furniture made of wood, polished and varnished, needs careful care, as it can be easily scratched. In addition, there may be traces from contact with hot water. For basic wood care, a universal polishing compound is selected.

If we are talking about a countertop made of MDF or chipboard with a plastic coating, then caring for it is not difficult and involves regular washing with detergents.

Don't forget that kitchen furniture need to move away from heating devices and from the walls bordering the street. Direct sunlight will also be harmful to wooden furniture.

An integral attribute of any home is a table. Despite the fact that the variety of shapes and materials of this piece of furniture can amaze even the most demanding and sophisticated buyers, many amateur furniture makers try to make a table with their own hands. There is nothing complicated about this, because the design of the table is not much more complicated than a regular stool. Armed with a saw, drill, hammer and other tools, you will be able to assemble such a product in literally half a day, and it will look no worse than a store-bought one. One of the main advantages handmade This furniture lies in the possibility of creative self-expression. In addition, a DIY table can become the central element of any interior.

It's no secret that the main function of the table is to organize a place for dining and receiving guests. In addition, it often serves as a place for family pastime, during which you can enjoy various entertainments: playing cards, monopoly, lotto, dominoes, etc. In addition to significant savings and demonstrating your carpentry skills to others, making a table with your own hands provides a person with an excellent opportunity create a unique item that is ideal in all respects: shape, size, material and reliability. By following the instructions and recommendations of professionals, you will see from your own experience that this furniture product It’s quite possible to do it yourself at home.

Today, various building materials are used to produce tables: metal, glass, plastic, stone, but furniture is often made from such high-quality material as wood. To create a wooden table with your own hands, you can use soft (spruce, pine, cedar, fir), hard (birch, walnut, oak, maple, ash) or very hard (dogwood, yew) wood species that have good resistance to rotting and mechanical damage. influences.

Walnut has the most valuable qualities for furniture - it combines high hardness and excellent viscosity. If you are new to carpentry, it is recommended to give preference to furniture made of pine, birch and oak. If you decide to make an original pine table with your own hands, you can use cheap, knotty boards, but they must be free of falling knots, cracks, stains and signs of rot.

Before you begin to analyze specific points and recommendations that will help you make a table with your own hands, it is important to decide on the design of the desired product. Due to the excellent combination of naturalness and environmental friendliness of wood with the dacha concept, a homemade wooden table will be an excellent option for garden furniture. A small table made of wood with your own hands, as if deliberately aged, will also fit well into the design of a city apartment made in Scandinavian or Provence style. It is noteworthy that in terms of the complexity of the work, this piece of furniture for most craftsmen is almost like a homemade piece of wood, since homemade table It's very easy to assemble. This fascinating process is reminiscent of assembling a construction set.

An integral attribute of every home is coffee table IR. At first glance, it may not seem the most the right furniture, the purchase of which is postponed for a long time.

But it is precisely such interior items that make it truly cozy and comfortable. On the coffee table you can place all the things you need that should be at hand: books, remote controls, keys and other small items.

DIY wooden coffee table

If you still haven’t been able to choose the option that suits you or have difficulties with the design, we will share with you ideas that will tell you how to make a coffee table with your own hands.

A wooden coffee table will fit perfectly into almost any interior style.

Wooden coffee table

The tree is especially popular among many various materials, from which furniture is made. If you care for it correctly wooden furniture, it will serve you for a very long time. In addition, by working independently, you can create a unique piece of furniture.

To make a wooden coffee table yourself, you will need to prepare everything necessary materials and tools. You can place the finished structure directly on the floor or additionally make four legs on which your table will be located.

An example of how you can make a coffee table with your own hands from wooden pallets

Using multiple drawers, you can also create great coffee tables for your living room. Four large drawers fastened together form a stylish table. There is usually a gap in the middle of the drawers, which can be decorated with various items.

Living room table made of wooden boxes

Photo: DIY coffee table

A coffee table made of wooden drawers is a great place to store all the necessary things.

DIY rectangular coffee table

Modern look

You can also make a table that will look modern and stylish. But before choosing a specific design for the table, determine the overall composition of the objects in the room. It is important to maintain a consistent style in every item that is used in the room.

Stylish wooden table with metal legs

Pay attention to retro style, which is also particularly popular today.

A real work of art - an elegant low coffee table made of wood

An effective design move - a furniture duo in the living room

Decorating a coffee table

You can turn your coffee table into a stylish and trendy piece of furniture with the help of decor. Thanks to this, the most inconspicuous table will become a real work of art. You can decorate it with anything: old wallpaper, shells, mirrors, fabric or mosaics.

Use textiles to decorate your coffee table to give it originality

Think about your mood. After a long day of work, you want to return to an atmosphere of calm, comfort and coziness. Therefore, for table decor, it is better to select elements that will fit perfectly into the overall interior of the apartment and will not disturb the harmony.

Mobile coffee tables on wheels are a beautiful piece of furniture that will transform any living room.

Materials and items that can be used more than once

A wooden pallet is a universal item from which you can make anything with your own hands. Perhaps the easiest way to build a coffee table, since the pallet is, in fact, a ready-made tabletop. It can be painted in any color, applied with a pattern, symbol or ornament. Wheels or wooden blocks can act as legs.

Transform a wooden pallet into practical designer furniture

Table design options depend only on your skills, preferences and, of course, the interior of the room

A glass tabletop can set the tone for the entire interior

Suitcases and old radiators

Your old suitcase can become an integral part of the interior of the apartment. To make a table out of it, just attach four legs. A coffee table made from a battery will also look unusual and original.

DIY coffee table from an old suitcase

Wooden coffee table on wheels in the interior

Don't be afraid to experiment and create a fun atmosphere in your home

A cozy reading corner with a round coffee table that can accommodate a large number of your favorite books

Of course, today everyone has the opportunity to buy any furniture in the store, including a table. But why not make it yourself, with your own hands?

It's not as difficult as it might seem at first glance. In addition, you have the opportunity to make a table that will fit perfectly in size and appearance to the interior of your kitchen or other room.

In addition, hand-made furniture is not only a money saver, but also a reason for pride, since not every man knows how to make something these days.

What types of tables are there?

If you decide to make boards yourself, then you need to figure out what types of tables there are and decide what exactly you need.

The simplest is a regular table with four legs, a table top and a frame. Making it will not be difficult even for those who are not experienced in woodworking.

If you are experienced enough in this matter, you can make the dining table round or oval, decorate it with carvings, paintings, or burn designs and patterns onto the surface.

A more complex option is made from boards. In essence, this is the same ordinary table, but quite thick and long crossbars are attached to its legs, on which seat boards are laid on top. This is how we get a table with benches on both sides. Such furniture is well suited both for the kitchen and for installation in the courtyard of a private house or cottage.

If there is only free space in the room in the corner, make corner table, which will fit perfectly into this unoccupied space. It may not be as comfortable to dine at as at a classic table, but you can put a TV, microwave or kettle on it - there will be enough space there.

One more interesting option can become a window sill table.

In essence, this is the same window sill, but significantly expanded and adapted, for example, for a comfortable workplace for a schoolchild.

The advantage of this solution is that the table will be well lit most of the day.

There is also a downside: sitting at such a table in winter, your feet will have to rest against a very warm, even hot radiator, which is not very convenient.

Materials and tools

Buying everything you need to make a table with your own hands is quite simple and will not be difficult or costly. The main material for the dining table is wood, or more precisely:

• Boards from 25 to 50 millimeters thick, 100–150 millimeters wide, quite long.
  The thicker the material for the tabletop, frame and legs, the heavier, but at the same time the more durable they will be.
  Choose boards from good wood, without any defects.
• Beam. It is necessary for making table legs, so choose fairly thick and strong samples. The timber can be replaced with the same boards, if you arrange them in the letter “L”, or use purchased aluminum table legs. You can also use balusters (curly carved wooden posts that support the railings on some stairs) as legs.
• Sheets of chipboard or plywood, which can be used as countertop materials. Choose samples that are thick and strong enough to withstand daily abuse.

As with materials, And Do-it-yourself tools and fasteners are easy to obtain; most homes have them. If something is missing, you can buy it at the nearest hardware store.

• pencil, corner, roulette and ruler;
• jigsaw or hacksaw on wood;
• screwdriver with a set of attachments and drill;
• plane, if it is necessary to pre-treat the boards from unevenness and defects;
• kit self-tapping screws, furniture bolts and nuts;
• sandpaper or grinding machine;
• varnish or stain, roller or tassel for processing the finished table.

Attention! When working with a jigsaw, always remember the safety rules and keep small children or pets away!

Simple kitchen table made of planks

First we need to make a tabletop.
There are several options here:

• Cut out the required size piece from a sheet of chipboard or plywood using a jigsaw;
• Laying a few is enough wide boards and subsequently secure them to the frame;
• Take large number relatively narrow boards, place them side up and glue them together using wood glue.
  The result is a fairly thick, heavy and durable tabletop.

Stages of work

Step 1. Assembling from boards table top.

Step 2. We make a frame from boards or their wooden bars. It can be made equal in size to the tabletop or with a small indentation, approximately 2–2.5 centimeters on each side of the table. Having fastened the parts of the frame with screws, use them to connect the frame to the tabletop.

Step 3. After we With We put the frame and tabletop together, half of the table is already ready. All that remains is to make his legs. If you use timber for this, drill two holes in it for furniture bolts. Moreover, they can be made either on one side, one above the other, or on two different ones for more secure fastening to the frame.

Important! Carefully check the length of the table legs; they should not differ from each other. Otherwise, the table will not stand level and wobble. If you do not want it to spoil the floor material, attach rubber “boots” to the bottom of the legs.

Then make similar holes in the table frame and fasten the legs and frame with bolts and nuts. The legs can also be secured from above using screws, but over time this fastening may become loose.

If you want to make table legs from boards, fold two boards in an "L" shape on the outer or internal corner frames and secure them using the same furniture bolts or screws.

To prevent the legs from becoming loose, connect the folded boards together in the lower and middle parts using screws or nails.

That's all, simple and reliable, made by yourself, ready!

Advice: Before you start, do simple drawing, preferably from several sides. Constantly check the dimensions of the parts. Some parts of the same size can be cut out at the same time if you secure the boards or beams with clamps.

Pallet table

Wooden pallets Widely used in shops and warehouses as cargo pallets.

If you wish, you can get a few pieces for free and use them as a basis for making an original and unusual kitchen table.

If at least on one side the surface of the pallet is solid, then you no longer need to make a tabletop, it is ready.

You just need to process it and, if desired, round the corners.

Pay attention! Since the pallets were originally intended for warehouses, no one sands and cleans them. Therefore, before making a table out of them, carefully sand them and remove all burrs. Irregularities and defects in the boards can be hidden using putty.

Stages of work

Step 1. Most pallets are open and there is quite a lot of space between the boards. distance, due to which the surface of the pallet can be used as table top not very convenient. There are two ways to solve this problem: either make boards appropriate size and secure with their screws between the pallet boards, or install a sheet on top plywood or chipboard.

Step 2. As for ordinary table, table legs from pallets can be made from timber or boards. Best fasten them with quite thick and strong pallet timber using nails, screws or furniture bolts.

To prevent the legs from becoming loose, connect them together with crossbars.