Bosch POF 1400 ACE is a professional router for home use as well as for work in production. The depth gauge with a ruler allows you to adjust the milling depth from 1 to 55 mm. The depth gauge is additionally equipped with an 8-level depth stop, the adjustment of which will allow high-quality material sampling in several passes. And for particularly precise adjustment of the height of the cutter (error up to 0.1 mm), the design provides a micrometric adjustment knob.

Working with different types of wood

The model is equipped with a long parallel stop, which is fixed with a screw on the frame of the router. Additionally, a cam stop and a centering pin can be installed, which will allow you to perform figured and circular milling. The soft start function ensures the start of work without jerks and, accordingly, damage to the working material. Depending on the type of wood and its density, you can adjust the speed of the cutter with a 6-step regulator in the range from 11,000 to 28,000 rpm. It is worth noting that the model works exclusively with collets 6 and 8 mm.

Reliable chip protection

Two guides are dressed in corrugated tubes that protect the device from chips. Also, the design provides a transparent protective "curtain", giving good review milling lines and at the same time, protecting the eyes from sawdust. Additionally, the visibility of milling is improved by the backlight, which is constantly on throughout the entire operation of the router. Included with the device is a pipe for connecting a dust collector, which will prevent sawdust from scattering throughout the workshop. A positive point is the presence of a convenient case for transporting the router, collets and spare nozzles.

Performing accurate milling operations impossible without the use of special equipment. The creation of grooves, curly stitching of edges and the formation of blind holes at home and in small workshops are carried out using hand power tools. Depending on the power, the operator of such a plant can process wood and plastic blanks or hard grades of metal alloys. The Bosch pof 1200 AE vertical device is positioned as universal tool. Its power is enough even for use in professional needs, and ergonomics meets the requirements for models for domestic use.

General information about the model

The machine is a mid-level milling machine that is suitable for a wide range of machining operations. First of all, the design is designed to work with wood, including hard rock. In creating the milling cutter, German engineers implemented several proprietary technologies, including electronic positioning systems, regulators and the ability to use a copy machine.

The model already in the basic configuration has a wide range of accessories, including a centering rod, collet chucks, an open-end wrench, a suction adapter, etc. The design itself was focused on the minimum connection of efforts from the operator, which ensures high ergonomics of the Bosch pof 1200 AE router. The price of the device in this case is 5-6 thousand. Taking into account the power of 1200 W, the amount is more than attractive. On the market, you can also find milling cutter models for 3-4 thousand with a similar power potential, but they are unlikely to provide the same level of functionality and reliability as Bosch.

Router characteristics

Usually, the technical and operational indicators of processing machines are determined by the power potential. It cannot be said that the Bosch pof 1200 AE router is a record holder in its segment in terms of workpiece processing capabilities. different sizes, but him specifications, which are presented below, are quite suitable for most typical operations:

• Unit power - 1200 W.
• Working stroke - 55 mm.
• The frequency of the engine is in the range from 11,000 to 28,000 rpm.
• Collet standard size - 6-8 mm.
• Cutter diameter - maximum 8 mm.
• Tool weight - 3.4 kg.

At high power, the installation was deprived of some functional additions. For example, the creators have excluded options such as soft start and the ability to maintain high speeds under constant load. This functionality, by the way, is present in most models of other Bosch power tools. But the possibility of adjusting the speed for specific tasks and the dust removal system remained.

Features of the Bosch pof 1200 AE model

The absence of the aforementioned functional systems can be explained by the fact that the design of this router has received many other additions, oriented specifically to the tasks of delicate and precise processing. For example, we can highlight the Bosch-SDS mechanism. This is the same copying installation, thanks to which the user can apply the same parameters to work with several blanks within the same session. Special attention designers paid attention to the means of centering and positioning. For this, in particular, a system of guide columns was implemented with rubber inserts for guard. In addition, the Bosch pof 1200 AE milling cutter is provided with a whole range of security systems. Here we can note overload protection, spindle lock, speed stabilization and a transparent casing that protects the user from chips.

Accessories and Consumables

A necessary component for any apparatus of this type is a cutter. This is a direct cutting element that forms grooves and holes. Carbide cutters with a diameter of 6-8 mm are suitable for this model. At the same time, it is important to consider their purpose. For edges and grooves, models with different design parameters are available. Also, the reliability of the processing operations depends on the collet. This is the component by which the cutter is attached to the tool.

Manufacturer in last years practices the use of keyless chucks. Such mechanisms are widely provided with equipment for construction electrical equipment - including milling. Bosch pof 1200 AE, in turn, has an autonomous collet locking mechanism. This has its advantages, but in any case, the operator will have to perform more manipulations to change the work item. Therefore, it is better to foresee several collet adapters in advance, which will ensure safety during the work process.

Cutter Installation Instructions

The integration of the milling cutting element is carried out in several stages. The first step is to rotate the chip guard and unlock the spindle. To insert a ready-to-use router into the collet, you need to loosen the fixing nut with a suitable wrench. This will allow the cutting element to be inserted to a sufficient depth. According to the instructions for Bosch pof 1200 AE, the minimum shank penetration into the collet niche should be 20 mm. Next, the fixing nut is tightened with the same wrench in the opposite position, and the chip protection returns to its place.

User manual

Before starting the processing of the material, it is necessary to set the optimal number of revolutions. The installation regulator allows you to work in six modes. Accordingly, the harder the workpiece, the higher the speed should be. Directly milling is performed in the direction opposite to the rotation of the cutter. A passing direction is dangerous in that the tool may jump out of the operator's hands. Immersion of a milling cutter is carried out smoothly and without jerks. At the same time, stopping at one position is also undesirable, since there is a risk of shifting the working element and expanding the capture zone - as a result, the workpiece may be damaged. After processing is completed, the Bosch pof 1200 AE vertical milling machine is placed in the upper position, and the engine is turned off. If the device is not going to be used for a long time, then it is better to disassemble it.

Router Maintenance

Like other equipment that works with wood materials, this tool must be protected from abundant dusting of chips. Ventilation holes and slots should be carefully inspected and cleaned after each working session. The same applies to metal, since accumulations of electrically conductive dust can be dangerous for the machine's engine. Actually, to prevent excessive contamination, you should connect a suction vacuum cleaner to the router every time. For this, the Bosch pof 1200 AE model is provided with a special nozzle. As a preventive measure, it is also recommended to perform an audit once a month. element base, evaluating the quality of fastening separate parts tool, insulation reliability and the state of the electrical base.

Security measures

You can use milling action only when working with materials that do not have direct contact with electrical or gas wiring. If there is a possibility of hidden tracks, this should be checked with a special metal detector. It is also not recommended to use blunt or deformed cutters. They can not only perform poor-quality processing, but also lead to the destruction of the fastening system. During the work process, the Bosch pof 1200 AE milling machine must be securely fixed in the hands. Although the device has a system for damping vibrations and noises, under intense loads, the level of vibrations can increase - you should be prepared for this.

Positive reviews

The model is more often used in household processing various materials. According to the owners, the unit is optimally suited for the implementation of complex grooves in wood blanks, as well as for some operations with aluminum. Although there are reviews that note the correction of locking mechanisms that use high-strength steels. This indicates a high power potential of the tool, which, of course, is a plus. Traditionally, the German instrument is also praised for its high ergonomics. The stabilization system, comfortable grip, guiding equipment - all this increases the comfort of working with the Bosch pof 1200 AE.

To begin with, if you want to choose an inexpensive milling machine home use, in order to gain experience, and go to look for information on the forums, you will encounter a situation where you eventually realize that you just lost time.

The situation is similar to reviews on photo forums, that is, any model will be obstructed, be it a camera or a router; all categories of devices will be mixed and the most expensive model, regardless of whether a person can save up money for this device for a lifetime or whether this model is needed at all specific person for non-professional use. Fortunately, device manufacturers have more order in their heads and strictly position their products in three main categories: home use, professional use, and industrial application. Accordingly, based on the above, the dimensions, price and design of the device will change. Personally, for myself, I bought a Bosch POF 1200 AE milling cutter, as it has no analogues in terms of price, workmanship and capabilities. If we talk about the price, then the price of Bosch POF 1200 AE is lower similar devices Maktec, but the possibilities are higher. It may not sound strange, but the build quality of Makita in our stores is simply shocking, even when compared with its own subsidiary Maktec, whose products do not have damaging cracks and gaps. Probably the reason lies in the assembly of Makita in Romania. Milling cutters are even more surprising Russian production, made in China, which are sold at a similar price or even higher, but not even close in any way. In general, import substitution in terms of price has been completed: the price is higher than a normal tool, and the quality is lower than the Chinese one.

The Bosch POF 1200 AE router comes in a nice compact package. I can't even believe that a full-fledged tool fits into such a small box.

On the reverse side The box describes the main advantages of the router over tools from other manufacturers.

The sticker on the box has a unique number that is included in the warranty card. This is probably why the instructions indicate that the router should be stored in the original packaging.

The other sticker indicates the warranty period, which is 2 years.

All three numbers must be indicated in the warranty card: the number from the package, the factory serial number and the number on the nameplate.

The parallel stop, although stamped, is made of high quality from a thick sheet of metal. There are no burrs.

The router comes with instructions in various languages. In addition to safety recommendations, when working with the device and the technical description, you can even get useful information in it, such as the carcinogenicity of certain types of wood, which many manufacturers of not only woodworking machines, but also manufacturers of furniture and building materials are modestly silent about.

Due to the fact that as a result of wood processing, fine dust is formed, which is dangerous not only for the respiratory system, but is generally explosive, it is strongly recommended to carry out work with suction of dust and chips with a vacuum cleaner. For this purpose, a removable adapter is attached to the nozzle of the vacuum cleaner. By the way, fine dust has a very bad effect on the engine, guides and bearings of the milling device.

The supplied wrench for tightening the collet has a standard opening of 19 millimeters.

The copy sleeve is also made very high quality. The copy sleeve allows you to mill parts according to a pre-made template.

The guide rods of the parallel stop are designed not only for attaching the parallel stop, but also for installing compasses on them.

The cam stop, after installing it on the parallel stop, allows you to mill grooves on curved surfaces.

The center pin is attached to parallel stop and allows you to produce grooves in a circle or holes of large diameter.

The Bosch POF 1200 AE vertical milling machine comes with a Bosch cutter with a diameter of 8 millimeters and a maximum allowable rotation of 30,000 rpm. When buying a cutter for a milling machine, it should be noted that it is forbidden to install cutters with a maximum speed less than it can develop. milling machine. It should also be borne in mind that the router must be driven counterclockwise along the outer surfaces, and clockwise along the inner holes.

The kit also comes with two collets for 6 and 8 millimeters. Collets are made of hardened hexagon.

Milling assembly Bosch machines POF 1200 AE is an example of German traditional culture excellent workmanship tool, despite the fact that it is made in China.

Unlike the Bosch POF 1400 AE milling machine, the Bosch POF 1200 AE milling machine does not have constant electronics that allow you to keep the same speed under load and at idle. There is also no fine adjustment of the immersion of the cutter, but the craftsmen figured out the cunning step of Bosch engineers and figured out how to return the possibility of fine adjustment of the immersion by removing a square piece of plastic in the router body and installing a milling depth fine adjustment knob.

The Bosch POF 1200 AE milling cutter consumes 1200 watts, has a current of 5.7 amperes, so working through Chinese basement extension cords is not possible. On the right side of the picture you can see the lever for fixing the depth of milling, above it, in the body, there is a plastic square that does not allow you to fine-tune the immersion of the cutter.

For a quick change of the cutter, the router has a spindle lock button - you will not need to poke around with two keys in small space, just press the spindle lock button and release the union nut with a wrench.

There are two knurled screws to install the suction adapter for the vacuum cleaner.

A plastic, transparent chip protection screen will protect not only from chips, but also soften the blow if the cutter shatters, if it is of poor quality or if the milling machine is used ineptly.

Unlike other milling machines presented on Russian market, and despite the fact that this milling machine is designed for home use, it has practically no play on the guide posts or it is invisible. Also, there is no rattle and creaking when moving the router body along the guides, like Russian routers made in the basements of China. Another plus is the protection of the guides from dirt with cuffs.

For quick installation The copy sleeve has a copy sleeve release lever.

Despite the fact that the cutter insertion depth limiter has a stroke of 1 millimeter, the 1200 model, unlike the 1400, does not have fine adjustment.

For the same type of operations or for the gradual selection of material from the workpiece, there is a stepped stop with adjusting screws. It also serves to set the depth of milling when the cutter is vertically immersed in the material.

For safety of work the switch has a clamp.

The Bosch POF 1200 AE milling cutter has an electronic speed control that allows you to change the speed from 11,000 to 28,000 rpm. The setting wheel has fixations from 1 to 6. A model of a similar Maktec class is not only more expensive, but also does not have not only constant electronics and a speed controller, but there is not even a soft start of the machine.

On the left side of the picture, you can see that the router has a plug instead of a fine-tuning knob. As all this has already been noted, if there are hands that grow from where it is needed, it is treated. Please note that any modification to the tool not only voids the warranty, but also exposes yourself and others to danger.

The sliding plate on the base plate has a perfectly flat surface.

The length of the cutter that is in the collet must be at least 2 centimeters, otherwise the collet may bend and the cutter break. As a result, we have a great device at a reasonable price. I would like to note once again that this tool, despite the fact that it is intended for home use, is serious and it is necessary to strictly observe all the security measures that are described in

Milling manipulations today have become available not only to professionals, but also to private craftsmen. This is possible thanks to inexpensive tools that can be used to perform a wide range of tasks. One of them is the Bosch POF 1400 ACE router, which will be discussed below. He is functional tool household purpose to work with wood. The model allows you to quickly achieve high-precision professional results, making the work of the master as convenient as possible. It is not worth overpaying if you are not going to use the router daily and expose it to high loads, it is better to purchase an affordable household model.

Specifications

One of the most important characteristics, which is primarily of interest to specialists and private craftsmen, is power. Bosch POF 1400 ACE has this parameter equal to 1400 watts. You may also be interested in revolutions, their number in this model varies from 11,000 to 28,000 per minute. The tool uses a universal type of milling cutter, among the additional functionality is a spindle lock, the ability to maintain a constant speed, as well as the function of connecting to a vacuum cleaner.

It is convenient that the Bosch POF 1400 ACE router comes with a case, which simplifies the transportation and carrying of the equipment for those consumers who are professionally engaged in milling work. If you describe this tool, then you can not say about the vertical stroke, which determines the maximum depth of milling. This parameter is one of the most important for such machines. This characteristic shows the amount of immersion of the cutter in the material. The higher this figure, the more massive parts you can process. For example, for the manufacture of furniture, a cutter stroke will be sufficient, which varies from 30 to 40 mm, but for processing a thick board, a milling depth of up to 80 mm will be required. The Bosch POF 1400 ACE router is characterized by a vertical stroke of 55 mm.

Comes with an 8mm collet and is backlit working area, and the master will be able to use the electronic speed control. For some other tools, these features are implemented mechanically. The speed is changed with the wheel. Manufacturers place it on the body or handle. By turning the wheel, you can set a certain high-speed milling mode, which will depend on the diameter of the cutter and the material.

What else should you pay attention to?

It should be noted that this tool has a microlift, it is necessary for ultra-precise adjustment of the depth of material processing and is a special screw with which you can adjust the position of the cutter to a millimeter.

If we consider the Bosch POF 1400 ACE milling cutter, then among its characteristics we can also note the presence of a copy sleeve. Working with the equipment will be quite easy, because the weight of the tool is only 3.2 kg.

additional characteristics

If you still have not decided whether to purchase the equipment described in the article, then it is worth noting for yourself that it has enough powerful engine, which can be used to complex work with all types of wood. Under load, the operator will be able to maintain a certain number of revolutions, this is provided by the built-in system. For convenient installation cutters, you can use the spindle lock.

The setting of the drilling characteristics is guaranteed with an accuracy of 1/10 mm. For comfortable installation bushings use the SDS system from the equipment manufacturer. The transparent screen will provide protection from flying chips, and the soft ergonomic handles will facilitate the work. The kit comes with a dust removal module, the manufacturer has provided a connector for it.

Consumer reviews

The Bosch POF 1400 ACE milling cutter, reviews of which will be mentioned below, is provided by the Constant Electronics system, with which you can maintain a certain number of revolutions when working with complex materials by type:

• wood;
• aluminum;
• synthetic plastic.

According to users, a very convenient feature is the system with which you can install the copy sleeve, for this you do not need to use additional tool, fixation is carried out by a bayonet mount. In addition to the above features, it is worth highlighting additional functions, which greatly simplifies the work with the equipment. Here, according to users, you can include a fairly strong aluminum support with a removable plastic guide, it can reduce friction and prevent damage to the workpieces.

The handle has soft pads, with this you can effectively control the progress of work. Those people who have already purchased this model note that they really like the presence of an adapter for connecting to a dust extraction device, this addition allows you to use a conventional household vacuum cleaner or power tools.

Additional features

The Bosch POF 1400 ACE 060326c820 router is an economical tool with which you can work with high precision and accuracy. A special built-in system saves the user's time, because the copying tool can be installed simply and quickly. The depth of entry is regulated with jeweler's precision, and the manual Fine Depth Control function helps to create any ornaments.

The equipment also ensures accuracy in work, because it is supplied with electronic system stabilization, with the help of it it is possible to carry out the most even and accurate cuts. Frazier electric Bosch POF 1400 ACE has many advantages, among them we should also highlight the presence of service centers in every city of Russia, where you can contact in case of problems.

Positive feedback about the features of operation

Users believe that the tool described above has an excellent combination of price and quality. The equipment does not fail even with hard use during the year, despite the fact that it is intended for professional use. The build quality is also noted by buyers, the presence of a case can also be called an advantage. The device is easy to use, its operation is not accompanied too high level noise, and enough power to carry out even complex work.

If you decide whether to buy a Bosch POF 1400 ACE router, it is recommended to read reviews about it. From them you can understand that for such a price, many consumers could not find analogues. In addition, the equipment perfectly copes with the tasks. you will appreciate smooth start and speed control, illumination of the working area and a copy sleeve. The microlift also facilitates the work, and if you use the tool in the table, then this thing and is completely irreplaceable.

Negative Feedback

If you purchase a Bosch POF 1400 ACE router, you will find 6 cutters in the kit. This tool cannot be called the embodiment of mere advantages, some consumers are faced with disadvantages. For example, when you press the handle, from which the wire comes out, sometimes a slight skew appears. It should be noted also the insignificant capacity of the suitcase, there is no way to put additional equipment. Despite the low weight, for some users the equipment is heavy and bulky, it will take some time to get used to the weight.

Conclusion

The Bosch POF 1400 ACE vertical milling cutter is worth buying if you sometimes face milling tasks at home. However, for professional use, it is best to purchase a tool special purpose. But if you still can’t decide, then you should also pay attention to the cost, which is 8200 rubles. and may influence your final choice.