How often in everyday life You have to think about choosing a wall mount for shelves. There are a huge number of types wall shelves. A wide variety of durable materials are used in production.

The main ones: natural wood, chipboard and MDF made of plastic, metal or glass are also gaining popularity among consumers.

These composite, figured or multi-tiered structures have become firmly established in our environment.

Therefore, everyone often has the question of how to hang a shelf on the wall using available methods fastenings

Types of fastening for wall shelves:

• Hidden (using hidden fasteners);
• Brackets;
• Corners and loops;
• Holders for glass models.

You can use all these methods of attaching a shelf to a wall yourself without the help of professionals.

It is most convenient to hang the structure on hidden fasteners.

Anyone with hands can also use brackets and corners. But before hanging a shelf on a glass wall, you need to check everything carefully and it is advisable to consult with knowledgeable people.

Hidden fastener mount

Fastenings of this kind allow the owner to hide all fastening components while creating an aesthetic, neat, weightless composition in any apartment for any interior.

For installation you can use:

• block attached to the wall;
• iron rods;
• hidden loops.

Wooden and plywood can be hung on the wall using timber pre-attached with dowels.

So that the bar does not stand out, it must be installed in size and also match in color.

An internal hollow shelf, shaped like a box, is placed over the timber and secured with self-tapping screws. Reinforcing pins for installing the structure are selected according to the size of the shelf itself. The required length must be at least 30 percent.

In order to clearly align the holes in the wall with the shelf, use a template. To create a durable structure on long time You should use superglue.

If the shelf is enough large sizes, then hidden hinges can be used for fastening. Required condition so that the loops are small and do not protrude significantly. Before starting work, you need to clearly mark the distances between the central parts of the loops.

According to the markings, they drill holes, insert a plug into them, and then tighten the screws, which are attached directly to the hinges on the shelf.

Installing shelves on brackets

This method can be used if there is no need to hide the fasteners. To save money, you can choose plastic or iron corners, although decorative fasteners are more common.

You should always purchase at least a couple of brackets. Their number depends on the thickness of the shelf.

The bracket comes complete with all necessary fittings. This kind of fastener will not fit into every interior. They will look best in standard interior solutions without any frills.

This is defined as unusual carved patterns, with which the bracket is equipped.

There are also the most innovative modifications, called pelicans, and fortifications in the form of precise geometric configurations.

They are perfect for minimalist and modern interiors.

Option color range for them, small - matte or polished chrome.

The installation process is very similar to installing hidden fasteners, but much faster. In addition, the wall must be marked according to horizontal level. The bracket is installed strictly in the designated places.

It is important to remember that any bracket for a removable structure must be extensive in order to firmly hold the wall shelf.

Corners and loops

This type of fastening is most common among consumers. It is quite simple, fast, neat. Suitable for any interior. Unlike the bracket, corners and hinges small sizes and don't really stand out.

First you need to decide on the place where you need to attach the shelf to the wall.

Of course, it will be better if the selected area is not previously cluttered with paintings or portraits. Set necessary materials can be purchased at any hardware store. We attach them to a pre-marked place on the outer bottom of the product.

For installation, self-tapping screws of various lengths and widths are used.

After installing the screws, the shelf must be attached so that the drilled holes in the corners (or eyelets) coincide with the marked places.

If everything matches, then you can tighten the screws, trying to do this as evenly, carefully, and smoothly as possible.

Fasteners for glass products

A glass shelf in any room always looks beautiful, and most importantly, appropriate. This piece of furniture creates a unique atmosphere, filling everything sun rays and light appearances.

Fastenings of such structures should highlight the elegance and crystalline nature of the shelf, while ensuring its strength and stability for a long time.

If you carefully follow all the instructions, you can fix the complex glass structure on the wall yourself. The most popular type of fastener is a specialized bracket.

The small thickness (four to twelve millimeters) and fragility of the shelves leads to the use of soft gaskets designed to protect the glass from all kinds of deformation.

The fastenings for such shelves are made in such a way that the surface is protected in the mounting area at the bottom and at the top.

To keep the upper area open, use various devices with suction cups. They must be secured to the bottom of the glass structure.

Installation features

1. Before installation, please make sure that everything necessary tools at hand and you won’t have to look for something at the most crucial moment. A building level and a pencil for determining and marking a horizontal line, a hammer drill for drilling holes. We use a screwdriver, hammer and screwdriver if necessary. It is also necessary to check that all materials and gaskets included in the kits are fully suitable.
2. Using a pencil and a level, we determine the boundaries of the placement of the wall structure. We mark the middle of the installation and the ends on both sides, as well as the fastening points.
3. In the marked place, drill the required number of holes using a hammer drill. The depth of the holes should not exceed 60 mm. To do this, you need to insert a D8 drill bit into the tool (before drilling, double check all the marked dimensions).
4. Plastic dowels should be installed in the resulting holes (most often included in the kit).
5. Then you need to attach the fasteners so that there is a hole at the bottom. For greater convenience, use a screwdriver.
6. The shelf must be placed on the brackets using smooth, careful movements so as not to pinch your fingers.
7. If necessary, use superglue for better reliability.

When installing structures, you need to pay attention to the tight fit of the shelf to the wall so that it does not swing or hang, because if there are children or pets at home, an unstable structure may be unsafe for their health.

Installation Rules

We choose the right place where your design will look most advantageous. Firstly, before starting installation, you need to take measurements of the desired shelf in order to know exactly its thickness, and, accordingly, the load level.

This is necessary to determine the number and location of fasteners.

For example, bookshelf will be more loaded than a shelf with souvenirs. Secondly, it is necessary to determine (at least visually) the thickness and strength of the wall to which the selected structure is attached. If the wall is concrete or brick, then there is no need to worry.

But if it is thin (less than 10 cm) and made of plasterboard, then it is better to hang anything on it yourself, or at least consult with installers. Basically, only decorative finishes are attached to such walls.

Regardless of the selected method and devices, it is necessary to draw a clearly straight line on the selected wall. To do this, use a building level or spirit level.

It is important to do everything smoothly, because this line determines the location for installing the fasteners. Reliability is the main rule of installation.

Fixing the structure with construction dowels is the safest. The only drawback of this type is that slight difficulties arise during dismantling.

The strength of fastening the shelf to the wall also depends on correctly sized construction screws and dowels.

Conclusion on the topic

So we figured out the basic methods and material options.

Now you can hang the shelves yourself without any problems. Good luck with the renovation!

Very often you have to hang shelves on the walls to accommodate all the elements. To rationally plan the interior, it is worth using the corners and, thus, freeing up the walls for cabinets and shelving. To do this, you need a corner shelf, which you can make yourself from existing materials. The article will discuss basic recommendations on how to make a corner shelf, as well as basic examples of designs.

Place corner shelves in different rooms

You can install a corner shelf in any room, but in most cases it is great for the kitchen or bathroom. Any housewife will quickly place on it a variety of jars with seasonings, cereals, etc. kitchen utensils, and in the bathroom such a shelf near the mirror will allow you to accommodate all hygiene products and free up the necessary drawers. It is worth noting that these rooms have a fairly high level of humidity, which means that the wood will need to be additionally treated with antiseptics and at least two layers of paint applied. The best option will become plastic or glass, since they have larger number advantages:

• resistant to moisture and temperature changes;
• mold and fungi do not appear on surfaces;
• withstand heavy weight;
• easy to clean;
• A variety of colors will allow the design to fit into any interior.

Also, corner shelves on the wall are a rational option that is suitable for bedrooms, children's rooms and living rooms. Any other furniture can be placed under the shelf, for example:

• nightstand;
• computer desk;
• armchair.

Regardless of what material was used, the design will look impressive and presentable. The corner shelf will conveniently accommodate all sorts of little things: books, photographs, dishes, candles, toys and much more.

Pay attention! To add more impact to a corner shelf, you can swipe to it. LED backlight. Using this method, designers add depth to the wall.

Required materials and tools

Before you start planning and manufacturing, it is worth collecting the available materials and calculating: will there be enough of them? You can make your own corner shelf from a wide variety of materials, such as:

• wooden boards;
• plywood;
• glass;
• plastic;
• window sill profiles;
• iron and others.

The first 4 options are considered the most common and practical. Anyone can handle them, and no special tool is required, as is the case with glass or iron. The set of tools in each case will be varied, but if we talk about lumber, then it is worth preparing in advance:

• hacksaw;
• jigsaw (manual or electric);
• saw;
• stationery knife;
• drill;
• sandpaper;
• glue and fasteners;
• ruler;
• pencil;
• paints and varnishes (paint or varnish);
• tassels.

Pay attention! For comparison, when making a corner glass shelf you will need fewer tools: fasteners (screws and dowels), a level, a drill, a felt-tip pen and a ruler.

Step by step instructions

1. An ordinary board left over from the renovation will be suitable as the main material. The width should be selected individually, based on the items that will be placed on it and the place where it will be installed.
2. In addition, for fastening you will need glue with a dispenser and screws (3.0x25 mm). Semicircular slats can be used as decoration.
3. We mark the board at a 45° angle to the required length and use a hacksaw to cut it at an angle of 45°. As a result, we get 4 shelves.
4. From the remains of the board you need to cut out racks of the same size (for example, 5x20 cm) in the amount of 6 pieces.
5. All elements must be cleaned sandpaper until perfectly smooth.
6. Let's start assembling the structure. Each shelf, except the top one, must be secured with two racks. The markings are applied in the middle, then the elements are fastened with screws. To strengthen the fasteners, use PVA glue.
7. For ease of fastening, the middle shelf posts are placed at the edges.
8. The remaining parts of the corner shelf are assembled in the same way.
9. If you wish and have free time, you can decorate the shelves using semicircular slats. So, with their help you can make low handrails so that small or round accessories do not fall out. At the final stage, the shelf is painted.

Pay attention! After the first element has been cut out, it is necessary to place it against the wall and check the correctness of the calculations. To prevent the board from bursting when fastening, the hole for the self-tapping screws is drilled slightly smaller than the screws.

Corner glass shelf

To make a small and simple design, it won’t take much time and special skills, even if we are talking about a glass shelf. So, to be precise and produce a design correct sizes, it is necessary to take measurements. After this, a diagram is drawn on paper indicating all the obtained parameters.

You can cut the glass yourself; if you don’t have a tool, go to a special workshop. Here craftsmen can cut out the required shape in a few minutes. The following can act as holders:

• metal rods;
• aluminum profile;
• wooden frame.

IN ideal It’s worth buying special holders that will come with screws and dowels for fastening. The holders are attached to the wall and the glasses are put on one by one. With the help building level evenness is checked. As a result, the cost of the shelf will be lower than the cost of a new one from the store.

Pay attention! For convenience, experts recommend creating a template for the future shelf from cardboard. This will avoid inaccuracies.

Only by strictly observing the data obtained after measurements can a high-quality and reliable product be manufactured, in particular, a corner shelf. It is very important to measure between the walls, since this angle is not always 90°. You can take as a basis the most different materials that are gathering dust in a barn or garage.

With all the diversity existing methods interior design and modern design, it is almost impossible to imagine a modern room in which shelves would not be used.

Decorative and easy to store various small items, massive for books - shelves can not only be an additional useful surface, but they can also act as decorative decoration any room or office.

There are two main ways to attach shelves:

• traditional mounting of shelves to the wall
• invisible or hidden fastening of shelves to the wall

The traditional method of fastening using various types brackets, metal or wooden racks popular only when fasteners correctly selected in color, texture and material also add their own “zest” to the artistic image premises.

But often, the presence of additional decorative and technological elements is not always consistent with the overall design of the designer and the target orientation of the structures. In this case, it would be better to use the second fastening method.

The development of modern design craft and the construction industry makes it possible not only to quickly cope with the task of hanging shelves, but also to successfully use the fastening of shelves to the wall without visible fasteners, thereby creating the illusion of floating in space.

Invisible fastening of shelves to the wall

Let's look at the main stages correct fastening shelves to the wall, while hiding all fastening elements:

1. First, you need to assess the strength of the wall or partition on which the shelf will be attached.

With thickness brick partition from 250 mm and concrete partitions with a thickness of 100 mm or more can be safely used for hanging shelves without additional supporting structures.

Scheme of invisible shelf fastening.

1 – bracket for fastening the shelf; 2 – mounting holes; 3 – steel axle; 4 – suspension; 5 – shelf.

With thinner bricks, cinder block and plasterboard walls up to 100 mm, it is possible to use invisible fastening of shelves to the wall, but such shelves are suitable only for decorative purposes.

Since they simply will not withstand additional loads.

Then you need to determine the thickness of the shelf itself.

It can be determined by placing a load of expected weight on it. The absence of visual deflection and deflection to the touch indicates sufficient thickness of the board.

An exception may be cases when the choice of a thicker board is dictated by the general concept of the interior.

However, it is also necessary to take into account the fastening features, due to which the thickness of the board, as a rule, cannot be less than 30 mm. The thickness of the shelf must be selected depending on the load, for example, for books - boards with a thickness of 45 to 60 mm are suitable.

The board must be dry and processed in accordance with its purpose.

Types of fastening shelves to the wall

After this, the types of fastening the shelves to the wall are selected, depending on its purpose and the thickness of the board.

There is a huge amount fastening materials, which can be masterfully hidden from prying eyes, let's consider some of them:

• Most popular on at the moment, is use of hidden hinges, located on the back of the shelf.

Fastening technology using hinges:

For accurate hanging, you need to accurately measure the distance between the centers of the loops.
This distance will determine the markings on the wall for the mounting holes. To ensure that the shelf hangs evenly and does not warp, it is better to use a building level, which will ensure an accurate horizontal line for the shelf.
After the holes in the wall are drilled in accordance with the markings, they are filled with a plug into which screws are screwed.
The screw should be screwed in deep enough, but the distance between its head and the wall should allow the shelf hinges to be put on.

Comes complete with shelves special fasteners, designed for invisible installation. A shelf installed in this way will be securely fastened. This will create a visual impression that it is literally hanging in the air.

Method of installing shelves using special furniture fittings

Let's consider step by step execution this installation.

It starts with purchasing a modern shelf in a furniture supermarket or online store.

Step 1. Measure the distance between the centers of the mounting holes directly on the product.

Step 2. After this, mark the location of the shelf on the wall. Using a building level, we draw a horizontal axis on which we mark the position of the mounting holes, taking into account the center-to-center distance between them.

Step 4. The next step is to drill a hole for attaching the brackets. They must be made strictly perpendicular to the wall, this will ensure that the shelf angle is 90 degrees relative to the wall. To simplify drilling, it is advisable to use a square.

Step 6. Then we attach the brackets to the wall using self-tapping screws.

Step 7. Now we carry out the direct installation of the shelf. To do this, we put it on the steel axles of the brackets, alternately tapping rubber mallet on the left and right sides in the front part. The shelf will be evenly installed on the fastening elements, eliminating distortions.

Step 8. The final stage will be to check the play and reliability of the fastening. After this, we remove the remaining debris and install a flowerpot with an orchid. The installation process is complete.

Another method of invisible fastening (metal rods)

Installation technology for fastening metal rods:

As a rule, reinforcing pins or threaded rods with a diameter of at least 10-12 mm are used.

First of all, we take our shelf and measure its length and width.

Then, using a ruler and a building level, we mark this length on the wall (not the entire distance, but a little shorter), at the location of the future location of the shelf.

We mark three board thicknesses on each side of the shelf and drill holes equal to the diameter of the pins; we make such holes in the shelf itself (you can use a template, since the holes in the wall and in the shelf must match exactly).

Then judge from the subsequent filling of the shelf, if there will be light souvenirs there, then these two pins will be enough, but if there will be heavier things, you can make more fastenings (even every 5 cm)

.
We take the required number of long rods (their length should be approximately 1/3 of the width of the shelf, but keep in mind that there should be at least 10-15 cm of pin in the wall).

Insert the rods into the wall half their length, check with a level so that they are exactly perpendicular to the wall; the durability of the entire structure and the safety of the objects standing on it depend on this. Then fix the rods synthetic glue or resin, wait until the glue dries.

After this, we place the shelf on the rods (you can additionally glue the pins to the shelf by pouring glue into the holes).
One of the mounting options can be considered preliminary installation a square block into the wall (usually used for narrow shelves).
Fastening installation technology:
To do this, a square block is attached to the wall, the side of which is equal to the thickness of the board for the future shelf.

It is attached using dowels, nails or plastic anchors with self-tapping screws. Then, round wooden pins (pins) are driven into the block into holes pre-drilled according to the template, which are lubricated with glue, after which the wide part of the shelf is put on them.

In order to place the board on pins or dowels, use a mallet with a rubber striker, which is gently struck on the outer edge of the board.

By varying the height, texture, color and thickness of the shelves, you can achieve original and unique design and create a feeling of orderliness and completeness in the design of the room.
Without limiting your imagination and using all the advantages of modern construction market, you should remember about safety, carefully make and check all fasteners.
In this case, the shelves are like any other element functional decor premises will serve for a long time, remaining a reliable, useful and beautiful element of the interior.

You can also watch a video of hanging a shelf on the wall

Corner shelves save space, so this design solution is a godsend for small areas. You can make such a piece of furniture yourself, because this does not require special knowledge, expensive equipment or large quantity time.

Selecting material and tools for the shelf

Corner shelf with your own hands can be made from various materials. Consumers very often choose chipboard, MDF or plywood. Another option could be window sill profiles, as well as glass.

The choice of tools depends on the material from which you need to create a shelf with your own hands.

Yes, for wooden models worth having:

• electric jigsaw;
• hacksaw;
• fine-tooth saw;
• drill;
• glue;
• a rack for creating compasses and compasses with a large radius;
• wooden slats for the base of the structure.

If the corner shelf will be made from a window sill profile, then it is worth purchasing the following tools:

• drill;
• hacksaw;
• level;
• self-tapping screws;
• rail to enhance edge rigidity;
• glue "Moment";
• cable channels.

The fewest tools required when you need to make a corner glass shelf:

• set of holders for glass shelves(there are already screws and dowels here);
• level;
• drill.

When all the materials and tools to complete the work have been collected, you can begin creating the shelves.

How to make a corner shelf?

Creating a shelf and installing it is a fairly quick process. Therefore, in a few hours (or less) you can easily transform a room, which cannot be compared with the time required to create a closet. You can make shelves correctly using step-by-step instructions.

Glass shelf

To make such a shelf, you need to follow these steps:

1. A shelf template is created from cardboard.
2. Glass cutting and processing can be done both at home and in a special workshop. But it is the professionals who will do all the work high level, and the consumer will have the opportunity to choose the most suitable material.
3. Holders are purchased.
4. Next, you need to put the shelf on one of the holders, attach it to the wall and use a pencil to mark the upper limit of its fastening.
5. The first holder is attached using the screws and dowels included in the kit.
6. The glass is inserted into the first holder, secured and put on the second. Using a level you need to level the shelf. Mark the drilling locations with a pencil.
7. The second holder is being attached.

This is a simple way to make glass shelves at home.

Shelf made of window sill profile

The shelf can be given any shape, but you should always remember right angle base that will be attached to the wall.

To build a shelf, follow the instructions:

1. The material is marked.
2. Using a hacksaw, the shelf is cut out.
3. Next, using a special strip, which matches the profile in thickness and length, the frame is strengthened. To do this, you need to place this material on Moment glue and secure it to the edge of the profile.
4. Holes are drilled in the already glued strip.
5. Self-tapping screws are driven into the wall under the holes already drilled in the shelf. A level is used during operation.
6. The open ends of the structure are hidden behind cable channels selected in thickness. They are placed on glue.
7. The shelf is fixed with self-tapping screws.

You can change the color of this design using various adhesive films selected for the interior.

Thus, an ordinary profile can easily turn into marble.

Shelf made of chipboard (plywood, MDF)

Attaching such shelves is done in several ways. The first is to attach it to the longitudinal rail-base, the second is to fix it in the grooves of the transverse base.

The first method is good because there is no need to drill either the tiles or the walls:

1. A shelf is cut out of chipboard. To do this, use a compass to draw a circle, divide it into 4 parts and cut each one with a jigsaw or hacksaw.
2. The location of the shelves and the size of the required groove are marked on the base rail. The blanks are applied to the rail, and their width is fixed.
3. Using a fine-toothed saw, cuts are made to the depth of the middle of the slats, and using a knife, the unnecessary element is removed.
4. On the shelf at the base corner, an area is outlined that needs to be cut out. In area it is equal to the depth and width of the groove in the rail.
5. Using a fine-toothed saw, you need to make a cut according to the markings and remove the unnecessary element.
6. Next, the shelves are ground and fit into the grooves is checked.
7. Using glue, the rail must be fixed to the wall, secured with tape and left for at least an hour.
8. Shelves are inserted into an already fixed rail without any other fixation.

In this simple way you can make shelving for the living room, bathroom, kitchen, etc.

To make a shelf using the second method, you must first make the grooves, and only then take on the main element:

1. In two bars, equal in length to the size of the sides of the shelf, using circular saw grooves of the required width are formed.
2. These elements are attached to the wall using self-tapping screws or dowels. It is necessary to ensure that their caps are completely recessed.
3. The angle is carefully measured. The measurements are transferred to the material, where the outline of the shelf is drawn.
4. The element is cut out using a jigsaw or file.
5. A special tape is used to decorate the edges.
6. When the shelf is completely ready, it is inserted into the grooves.

Just a few hours, and a beautiful decorative element is already in place!

When creating a shelf with his own hands, the master takes into account everything: his ideas, the interior, the features of the corner, where this item will be located.

Often the corners in rooms are empty, although there is a way to use them rationally: arrange corner corners. Such designs compare favorably with standard ones appearance, and most importantly - they save free space in rooms with small footage.

They are sold in furniture store and are made to order, however independent construction won't cause any problems either. Today we will tell you how to properly place such furniture in the house, choose suitable materials for making and making corner shelves from wood, chipboard, glass and scraps metal-plastic pipes without the help of professionals.

Corner shelves on the wall

Hanging corner shelves are good because they allow you to free up space below for other furniture. Typically, such shelves are used to store books, souvenirs and other small items. It is also convenient to place flowers, icons, telephones, bathroom and kitchen accessories on them. We will look at the nuances of creating models suitable for each of these cases, and will start with a corner shelf for the living room.

Corner shelves save space in the room

Shelves for flowers, souvenirs and other small items are made of metal, plasterboard, glass, but the most popular material is still wood and its substitutes: they are practical, easy to care for and can be processed at home without any extra effort. To save money, wood boards(MDF, laminated chipboard) you can not take full-size ones, but choose from leftovers on the market; there you often come across pieces of sizes suitable for shelves.

In addition to the material, you will need tools for wood processing - a drill, a jigsaw, sandpaper, a tape measure, a ruler and a marker for marking. You can’t do without fastening elements (screws, dowels) and trim tape for finishing the edges.

The decorative wall shelf in question consists of three tiers connected by sidewalls. First, we make a design drawing and indicate the dimensions of the components on it. Then we make individual parts from cardboard or paper and transfer them to the material, in this case - laminated chipboard, tracing the outline with a marker or the tip of a stationery knife.

Construction drawing

The parts are cut out using a jigsaw with fine teeth. After cutting, it is better to number the shelf fragments so as not to confuse them during assembly. In the finished parts, mark the fastener locations (for fastening individual fragments of the structure and for hanging on the wall) and drill holes of the required diameter with a drill.

Before joining, the components of the structure are cleaned of dust and sawdust and equipped with a decorative edge. To do this, the trimming tape is applied to the cut areas and glued by running a heated iron over the surface covered with a rag. If the tape turns out to be longer than necessary, carefully cut off the excess stationery knife, and the resulting edge is cleaned with sandpaper.

Processing slices

After completing the processing of the parts, we begin assembly, focusing on the diagram and numbering. Dowels are inserted into some of the holes and the parts are connected to each other with self-tapping screws, using a screwdriver or screwdriver. Upon completion of assembly, marks are made on the wall for the fasteners on which the shelf will be hung. IN in this case You will need four of them - one for each jumper.

Having drilled holes of the required depth with a drill (for concrete walls It is worth using drills with a Pobedit tip) dowels are placed in them and the shelf is fixed with self-tapping screws. The finishing touch is to decorate the heads of the wall fasteners with special caps to match the color of the shelf. The design is ready! Now all that remains is to arrange books, photos and other little things dear to the heart.

Fastener caps can be disguised

Corner shelves for the kitchen

The kitchen accumulates a considerable amount of all kinds of jars with spices and sauces, small utensils for cooking, serving, and the like. If the main cabinets are already full, they will come to help in the fight against kitchen chaos corner shelves on the wall. They are hung above the dining area, above the stove or in another suitable place. Of course, such a shelf must be durable and spacious, so we opted for a two-tier structure made of fiberboard.

Kitchen shelf layout and diagram

The tools needed are similar to those used for the living room shelf. The fittings and fasteners are also similar, but you will additionally need hinged hinges and confirmations (furniture screws). First of all, measure the available free space and, focusing on it, draw up a drawing of the shelf, indicating on it the parameters of all parts. Take the sketches given in the article as a sample or find others on the Internet.

Work on the construction of a kitchen corner shelf is carried out in the following order:

• We make sidewalls. To do this, contours of parts are applied to sheets of material, which are then cut out with a jigsaw. It is more convenient to perform this work for two sidewalls at once, if it is possible to fasten 2 fiberboard sheet clamps.
• If chips occur when cutting parts, they are treated with sandpaper or a grinding machine.
• The cuts on the sidewalls are covered with trim tape, ironing it with an iron. In places of bends, the iron is applied to the tape with the nose part.

Sidewalls and crossbars

• After making all the sidewalls, cut out the rectangular crossbars with which they will be connected. To give the design originality, the edges of the crossbars are rounded. Pasting the sections is done in the same way as on the sidewalls.
• Let's start assembling. At the junction of the two inner sidewalls with the upper crossbars, slots are cut out in the side parts of such length and thickness as to fit upper part shelves.
• In the remaining joints, two holes for confirmations are drilled on each side with a drill.

Connecting parts

• The shelf elements are joined and fastened by screwing in the confirms until a slight crack appears when tightened.
• The last crossbar of the shelf is inserted into the pre-cut grooves. At the point of contact with the outer sidewalls, it is fixed with confirmations.
• Finally, the fastener heads are masked with decorative plugs and the shelf is hung in the chosen location. Suitable hangers can be purchased at the market or at a hardware store.

Assembled shelf

Corner shelves for icons

Majority Orthodox people icons are kept in the house. To place them you need special place Traditionally, icons are placed in the corner of the house facing east. A corner shelf, especially a wooden one, is perfect for these purposes.

Simple single-tier shelf for icons

Making a shelf for icons does not require special skills; difficulties arise only if you want to decorate it openwork carving or balusters. But you can do without such finishing or purchase the necessary parts from professional wood carvers. We will look at creating a simple single-tier shelf.

Natural wood looks more noble than substitutes, so it’s worth choosing it. Suitable materials include solid wood and wide planed boards. The first step is to outline the outline and cut out a corner that will become the basis of the structure and a cornice - a narrow strip attached to the front of the shelf.

Preparation and assembly of the structure

If desired, the cornice is made curly - wavy at the bottom. The connection between the cornice and the shelf is made using dowels (protruding wooden pins). To do this, 2-3 cm recesses are drilled in a triangular fragment and dowels are placed inside them so that they protrude outward by 1 cm.

Then the places opposite the dowels are marked on the cornice and holes are drilled to allow the two parts to be tightly connected. Before assembling, it is recommended to sand the shelf components and varnish them. Finished product is equipped with four hangers (two on each side) and is attached to the wall. Interestingly, if you place the same structure lower, you will get an original shelf for a telephone on the wall.

Corner shelves in the bathroom

Glass shelf for bathroom

The bathroom is the place that needs saving space more than others, because the rooms for taking water procedures Most apartments cannot be called spacious. Therefore, it is more rational to use corner structures for storing things. It is clear that a corner shelf on a wall made of wood or chipboard is not best solution for the bathroom, after all high humidity will quickly destroy material prone to rotting. In this situation, it is more appropriate to use products made of plastic or glass, which are resistant to moisture and can be easily treated with disinfectants.

Such shelves are available in abundance in any plumbing store, but if you like to make things with your own hands and want to get original item, adapted to your tastes and needs, you can make them yourself. Let's look at how to properly make a shelf for a bathroom using a glass structure as an example.

Tools you should prepare:

• drill;
• screwdriver;
• screws and dowels;
• tape measure and pencil;
• building level.

You will also need shelf holders (sold at construction stores) and tempered glass not thinner than 5 mm. First you need to think about the design of the product, take measurements at the location where it will be placed and draw a template. Then the parts are cut out of the glass. It is recommended to order this procedure from a glass workshop, this way the shelf will look more aesthetically pleasing, and you will protect yourself from injuries and possible damage to the material.

The next stage of work is to attach the finished parts to the wall. To do this, the holders are put on and fixed on the shelf, it is brought to the wall and in the right place The places for the dowels are marked. Using a drill (with a special drill), checking the level, holes are drilled according to the marks, and fasteners are inserted into them. Then all that remains is to hang the structure and make sure that it is securely fastened.

Holes for fasteners

Corner shelves for books

Owners of a large library are familiar with the problem of convenience, when they want to place their favorite publications in immediate access without cluttering the room with cabinets and shelving. There is a way out. How to make classic ones wooden shelves We already told you, but there is another option corner design ideal for storing books. Because of unusual design it will not take root in every home, but for lovers non-standard solutions you'll definitely like it.

Spacious bookshelf made of pipes

Corner wall shelf made from scraps water pipes will compactly place your books and will cost very little. You will need pipes, carbon fittings, dowels, self-tapping screws, paint and tools - an angle grinder, a gas wrench, a vice, a welding machine.

The shelf is assembled as follows - the pipes are cut into fragments (in this case 15 pieces), connected with fittings and welded. If welding machine no, you can get by with screws by screwing them in at the junctions of pipes and fittings. The structure is fixed to the wall at the top and bottom points using dowels previously driven into the wall.

It is advisable to paint the finished product (spray paint will do) to hide defects, welding marks and differences in the color of parts. The resulting octagonal shelf will easily fit into modern interior apartments and organize your library.