How to remove liquid wallpaper from walls? This type of wall covering appeared relatively recently for interior decoration and immediately gained popularity for beautiful view and high technical specifications. But, like any material, it liquid wallpaper There is a service life that requires restoration, and sometimes complete removal of the coating.

While the instructions for use describe the application of the material on the walls in detail, not many people know how to remove wallpaper. The article will tell you how to do this.

Features of liquid wallpaper

Liquid wallpaper for wall decoration resembles decorative plaster, the basis of which is:

• Natural cellulose fiber.
• CMC glue, for binding fibers.

Using this material you can create smooth surfaces with a beautiful, slightly rough texture that are soft to the touch.

In this case:

• The golden web in liquid wallpaper transforms the design of any interior, giving the room:

1. luxury;
2. elegance.

• For lovers of the avant-garde ideal option– using a combination of trellises with different color spots.
• For business style Strict gray tones are perfect.

The main properties of liquid wallpaper for wall decoration are:

• High level of heat and sound insulation, which is ensured by the microporous structure of the trellises.
• Antistatic properties, which prevents dust from settling. This is due to natural origin components of a material that have a neutral electrical charge.
• They don't create greenhouse effect and do not allow the formation of dampness, well hide cracks and other wall defects.
• High level of fire safety, which does not allow fire to spread and does not release toxic substances into the air.
• Light fastness.
• They do not absorb odor.
• Ease of use. The liquid composition does not need to be measured and cut; the appearance of seams is eliminated during finishing.
• Good elasticity allows the trellises to fit tightly to the platbands, baseboards, and fill the cracks.
• Wallpaper can be applied partially, removing the contaminated layer, and applying the new composition only to a certain area of ​​the surface.

How to prepare a room for coating removal

A new coating should not be applied without getting rid of the old one.

This may lead to:

• To the accumulation of bacteria and mold on and under existing wallpaper. Plaque can only be removed by applying special products, but their effectiveness can only be achieved by removing the old material.
• To the appearance of irregularities, which will be too noticeable on the new topcoat.

Before removing liquid wallpaper, some measures must be taken:

• The baseboards and baguettes are sealed with masking tape.
• Sockets and switches are protected to prevent dust and moisture from entering them.
• Furniture and all interior elements are covered with film.
• The electricity goes out.

Liquid wallpaper acts as an excellent finishing material, because it is durable, environmentally friendly, and in addition, its surface can be painted in any color without updating the walls during renovation. However, if you decide to make repairs, then you will certainly need to remove the old decorative layer from the walls.

Such work is not difficult, but there are several pitfalls that you need to be aware of in order to avoid mistakes. It is even easier to remove liquid wallpaper from walls if they have never been painted. But if the base was covered water-based paint or varnish, you will have to make some effort.

Preparatory work

Quite often today, when finishing walls, liquid such finishing is used, you can find out if you read the information presented below. At the first stage, it is important to prepare. We need to think about protection. Using a spatula will ensure a minimum amount of contamination, but if you use a grinder, dust will fly in all directions.

In order to avoid unpleasant consequences, it is recommended to purchase one that can be used to seal baseboards, switches and sockets. After completing the work, you can get rid of the tape, and there will be no traces of it left on the walls.

Furniture protection

If you also once used liquid wallpaper when decorating rooms, you should definitely know how to remove such a finish from a wall. Power tools are often used for this. If you have any available, then before you start using them, it is recommended to remove pieces of furniture from the room or cover them with thick fabric/film. During repairs, it is better to turn off the electricity and insulate the sockets so that no current passes through the wet wall.

Using wallpaper softeners

It will be much easier to remove wallpaper if you add special products to the water to remove them, among them the following should be highlighted:

• dishwashing liquid;
• wallpaper remover;
• composition of vinegar and fabric softener;
• wallpaper glue.

If you have liquid wallpaper on your walls, you can find out how to remove such a coating from the wall if you read the information in the article. To make work easier, you should add Fairy type liquid to the water. You can use any other household chemicals; some home craftsmen advise using liquid soap. You will need 50 ml for 1 liter of water. In construction stores you can find special compounds to remove different Advantage This approach is harmless. The mixtures are odorless, easy to use and begin to act fairly quickly after application.

You can prepare a liquid like “Methylane” yourself. To do this, you need to take 5 liters of water, adding two tablespoons of vinegar and the same amount of fabric softener. A jelly-like mass, convenient for application, can be prepared from which is added

Description of techniques for removing liquid wallpaper

If you used liquid wallpaper during renovations a few years ago, you will sooner or later want to know how to remove them from the wall. The simplest, but most labor-intensive method is the use of a metal spatula. This option is suitable if the wallpaper has not been subjected to additional treatment with varnish or paint. It will be easier to remove the coating if it has viscose fibers.

Liquid plaster type wallpaper is more difficult to remove. To carry out the work you should use:

• bucket;
• wide brush.

If you don’t have a spatula, you can purchase one, but you need to choose a tool that has a curved handle. The bucket should be filled with warm water.

If you are wondering how to remove liquid wallpaper from a wall, then at the first stage you need to add special products to the water, which can be made according to the recipes described above. Using a brush, the solution should be applied to the wall, evenly distributing it over the surface. You need to leave it until the coating begins to soften. It is important to wait a certain time until the paper swells. Then you can start working with a spatula.

The wallpaper must be sufficiently flexible, otherwise the process will be difficult. Before removing liquid wallpaper from the wall, you should remember whether a composition was used to apply it, which requires re-use. In this case, the finishing is laid out according to flat surface to dry, and then it can be placed in a bag for reapplication. Sometimes it happens that the coating adheres quite tightly to the wall; in this case, using a spatula will not help. Then you can use different power tools.

Removal features: use of a grinder

You can quickly remove liquid wallpaper from walls using special equipment such as a grinding machine. This method involves the use of physical force and is accompanied by the formation large quantity dust. However, you can save time and remove coatings of as high a density as you like.

During operation, the machine should be pressed tightly against the surface. The technician needs to wear a respirator and safety glasses. Many home craftsmen, wondering how to remove liquid wallpaper from the wall, come to a solution that involves the use of an angle grinder, which you need to purchase grinding wheel. You can use special nozzles that will protect the surface from deep penetration. The tool must have high power and a reinforced body. It is important to remember that the grinder acts as a traumatic tool, so the operator should be careful when working with it.

Conclusion

If during renovations several years ago you used liquid wallpaper, how to remove it from the wall? correct technique will allow you to understand. Sometimes the technology involves the use of an industrial hair dryer. This approach is relevant for those who do not want to bother with a simple spatula, but do not have an angle grinder in their arsenal.

At the first stage of such work, the walls must be moistened generously with water, and then heated with hot air. It penetrates into deep layers and the coating comes off easily. Before removing liquid wallpaper from the walls using this method, it is recommended to prepare a scraper.

No matter how stylish, elegant and fashionable the interior is, over time it has to be updated. Even the most expensive and high-quality finishing materials become unusable during use. Wallpaper loses its presentation especially quickly. Affects wall decoration negative impact many factors: sunlight, scratches, humidity and much more. To update a room, you need to remove the old one as quickly, easily and safely as possible. finishing material. Next we will talk about how to remove liquid wallpaper from walls in various ways.

Preparatory work

Before starting the process of removing the finish from the walls and ceiling, it is necessary to carry out a certain amount of work. It is worth noting that removing wallpaper is accompanied by a large amount of debris and dust, so the room must be prepared properly.

Let's start the preparatory stage:

• All furniture must be removed from the room being renovated. Bulky items that are difficult to transport must be wrapped in film or paper;

• doors should be protected using polyethylene. It is recommended to dismantle the platbands. This material also used to protect floor coverings;

• Frames are removed from all sockets and switches. Next, use masking tape to close them. Scotch tape is also useful for attaching the film;

• windows and window sill should be wrapped with thick film;

• It is recommended to cover all lamps with oilcloth and secure it with tape.

Tools

To remove liquid wallpaper (depending on the removal method), you will need the following tools:

• several metal spatulas;

• construction hair dryer;

• brush;

• knife;

• a special solution for softening wallpaper;

• grinder;

• masking tape.

Preparing screens for removing finishing

Depending on the density and thickness of the layer, a special solution is prepared, which can significantly reduce working time. The easiest way is to wet the wallpaper with warm water and pick it up a little before removing it. More effective way– mix warm water with household chemicals.

In finishing materials stores you can find special compounds designed for removing liquid wallpaper.

You can also use improvised means. For example, add a little shower gel, liquid soap, shampoo or dish soap to the water. It is worth noting that this solution is completely safe for health. It can be used in a home where pets or children live. In interior spaces, users who have experience in removing liquid wallpaper recommend using the following composition: 2 tablespoons of vinegar, as well as 2 tablespoons of conditioner (hair product) are diluted in 5 liters of water. Afterwards the solution is applied to the wallpaper.

How to remove with a sander?

A straight surface sander will help you quickly and efficiently remove old wallpaper. Cons this method– accumulation of dust that forms during operation. This technique also requires physical strength and endurance.

Before you start:

• eyes should be covered with safety glasses;

• Due to the dust you will need a respirator. It will protect the respiratory organs from debris.

During the work it is necessary:

• press the device tightly to the surface with wallpaper;

• act carefully so as not to injure yourself.

If you attach a special grinding wheel to the grinder, it can be used instead of a machine. It is highly recommended to use attachments whose main purpose is to protect walls from damage during operation. Do not forget that during the work you should strictly follow safety rules.

How to use a spatula?

One of the most inexpensive and durable methods of removing finishes is to remove them using a regular metal spatula. If you choose this method, be prepared to spend a lot of time. Experts recommend using a spatula only if the material remains in its original form (without adding varnish or paint).

To work you will need:

• The main tool is a spatula. A model with a curved handle will be more effective;
• a container filled with warm water;
• wide brush.

Let's start removing the wallpaper:

• you need to dilute the substance in water to soften the coating or use one of the tips described above;
• Using a brush, cover the wallpaper evenly. If necessary, repeat the attempt until the coating becomes loose. We'll have to wait a little;
• After the work done, the wallpaper should become more flexible. Now is the time to remove the finishing material with a spatula.

Remove with an industrial hairdryer

If the above two methods for removing wallpaper do not suit you for any reason, we suggest that you familiarize yourself with another one effective technique. Instead of a metal spatula or power tools, you can use a hair dryer. Before work, the wallpaper is washed with plain water (or with the addition of a solution) and then treated with a hairdryer.

Hot air is able to penetrate deep into the coating, which allows you to remove material from high density. After treatment, the finish can be removed using a scraper.

This technique has several disadvantages:

• it will take a lot of time to process all the walls;
• in some cases, after dismantling, liquid wallpaper can be reused. When removing using a hairdryer, this function is not possible;
• Remember that the device consumes a lot of electricity.

Using a steam generator

To significantly speed up the process of removing wallpaper of the above type, the finishing material can be pre-softened using a steam generator. Hot steam will make the raw material more loose and pliable. Use extreme caution when using this device.

Removal from drywall

When removing liquid wallpaper from the surface of drywall, you need to be very careful not to cause significant damage to the base. Experts recommend giving up manual methods removing the finish, as these techniques can irreparably damage the drywall. Despite the complexity of the work, there are several ways safe removal material.

• To work you will need a serrated knife or roller and needles. With their help, you need to scratch the wall in order to disrupt the integrity of the coating. You should work extremely carefully;

• Afterwards, the finishing material is moistened with warm water or a substance with a special solution, using a trowel or sponge. Due to damage to the wallpaper, the liquid will have a more effective effect on the material. For greater efficiency, you can use a steam generator;

• We leave the wallpaper for about 30 minutes and then begin to carefully remove the coating in small parts with a spatula or scraper.

Remember that liquid-type wallpaper boasts excellent water-repellent properties.

If the first treatment with water does not produce results, you must wait longer for the liquid to take effect or try again.

Removal from the ceiling

To clean the ceiling from old liquid wallpaper, you can use any of the above methods, but there are still certain recommendations. Despite the effectiveness of electrical appliances, such as a grinder or grinder, you should be careful, since they are heavy equipment that requires not only experience, but also strength to use. Given the awkward position when working while cleaning the cloth, you can get injured by dropping the device from your hands.

From the walls at home. Renovating an apartment or private house is inevitable (someday it will have to be done). Therefore, it is worth knowing how to properly remove liquid wallpaper. Of course, dismantling conditions may vary - it depends on factors such as brand finishing composition and availability paint coating cladding. The most important thing is to remove this mixture decorative plaster with wallpaper it is possible, and all the methods used in such situations do not represent something new.

What is liquid wallpaper

Prepackaged liquid wallpaper of different colors

This finishing coat, like liquid wallpaper, is also known in the post-Soviet space as silk, which is most likely caused by a pleasant sensation when touched. This composition is sold packaged in bags by weight and mainly consists of silk and/or cellulose fibers, dyes, adhesive binders, plasticizers and natural fungicides. In addition, for decoration, components such as mica, mother-of-pearl, sparkles (glitters) and, of course, mineral chips are added to the substance, which gives the finished surface a soft roughness. This material is divided into three types, that is, wallpaper can be:

1. silk;
2. cellulose;
3. alkali-cellulose;
4. the same compositions, only ready for use, but when removing the finish this does not make any difference.

Most often, old cellulose and alkali-cellulose coatings are removed, since silk coatings have a much longer service life, although they can also be removed if there is a need for replacement.

Dismantling methods

To clean walls (ceilings) you can use different ways, but in any case it is impossible to do without first preparing the room and selecting tools. Below you will find instructions using which you can achieve the desired result.

Preliminary stage

The furniture is covered with a special plastic film

First of all, you need to protect the room from a large amount of dirt, which is inevitable when dismantling any plaster coatings and for this you need masking tape and thin polyethylene film to protect furniture (this can be purchased at most hardware stores and construction stores, V shopping centers). Of course, it is best when it is possible to completely empty the room, but this is a privilege of the private sector, and there is simply nowhere to move the furniture in the apartment. So, you will need:

• cover all the furniture in the room with plastic film and secure it at the bottom to the legs or even to the floor with tape (preferably masking tape);
• The film is also used to cover the door with platbands and windows with window sills - for fixing here it is best to use masking and double-sided tape;
• if there is an arch instead of doors, then the film can be hung in the form of a curtain, only inside the arch, using either double-sided or masking tape;
• Decorative frames should be removed from sockets and switches;
• It is better to cover floor skirting boards, fillets, decorative rosettes and ceiling moldings with film;
• if the chandelier and sconce are difficult to remove, then they are also wrapped in polyethylene;
• when dismantling and repair of the floor is not planned, it is best to protect it by covering it with film - the problem is easier to prevent than to correct the consequences.

What tools will you need?

Note. You don't need all the tools listed below. Simply, by choosing a different method, you also choose the most suitable tools for this.

Paint removal chain

Scroll:

• Spatulas - if somewhere on the farm there are old spatulas from the times of the USSR, then it is better to use them, since the metal there is thick. Modern instruments much thinner, so when using it as a scraper, the narrow blade needs to be trimmed, leaving 3-4 cm in length, but if it is wider than 100 mm, then this is not necessary.
• Maklovitsa or just a wide brush.
• Paint roller.
• Warm water with added household chemicals or special preparations for removing such finishes.
• Disk grinding machine.
• Construction hair dryer and/or steam generator;
• The tape is masking and double-sided.
• Electric drill.
• *Homemade thresher made from chains on a rod.

*Explanation. 3-5 pieces of chain 15-20 cm long are put on a bolt 70-100 mm long and pressed with a nut and washer. To prevent it from unwinding, it is additionally pressed with a lock nut. The bolt is clamped in the drill chuck and the paint chipper is ready.

Homemade solution

You can make the solution yourself

I’ll say right away that in most cases, to remove liquid wallpaper from a wall, it’s enough to soak it warm water without any additives. But sometimes the layer of plaster turns out to be thick - this depends on the puttyer who did the repair, as well as on the fraction of filler (crumbs) in the composition. But how to remove liquid wallpaper from walls at home if the layer is thick or if it is covered with varnish? Warm water alone is not enough here, and we will divide this question into two parts.

So as not to search special remedy in stores, it can be prepared at home from household chemicals available on the farm. This can be liquid soap, laundry detergent or dishwashing detergent. The mixture is made in proportions of 1/0.05 or 50 milliliters (50 grams) of detergent per liter of warm water. There is another recipe for preparing the mixture: add two tablespoons of 9% vinegar and two tablespoons of hair conditioner to 5 liters of warm water. Both options are completely harmless to health, but, as in any other case, it is undesirable to get them in the eyes - they will not cause harm, but they will sting.

Regular removal of liquid wallpaper from walls

The moistened layer is removed with a spatula

If the layer of the mixture is thin, then it is very easy to remove it and to do this you should moisten the area (about 0.5-0.7 m2) with warm water using a brush or paint roller (some use a water spray), and then wait 1-2 minutes . After this, it must be removed with a spatula, and very quickly: the tool is applied to the wall perpendicularly and pulled, as if scraping along the surface. If the finishing still remains on any area, do not rush to make more physical efforts - you can ruin the rough base. Therefore, if you encounter such a situation, wet the problem area again and wait 1-2 minutes. If even after re-moisturizing there is no positive result, then move on to supplements.

If you fail with regular moisturizing, try doing the same job, but adding household chemicals to warm water, or just buy a special mixture in the store (more detailed information in the section " Homemade solution"). If this option does not work, move on to another method.

Note. Make sure that no debris or pieces of plaster get into the layer removed with a spatula. If this does not happen, the wallpaper can be reused.

Video: The easiest way to remove liquid wallpaper from a wall

Using a hair dryer, steam generator and grinder

Warming up liquid wallpaper construction hairdryer

If clean warm water or its solution with household detergents If you are unable to soften the coating to the point where it begins to come off easily, you can try heating it. For this purpose, a construction hair dryer is used - you heat up a small area of ​​about 0.2-0.3 m2 (there is no point in grabbing any more, since the surface will cool) and immediately remove the softened layer with a spatula. If the rough base for the cladding has been painted, the wallpaper will be removed along with the paint and will be unsuitable for reuse. It should be noted that this method has its own negative aspects, For example:

• hot air will raise the temperature in the room;
• it takes a lot of time;
• excessive consumption of electricity (the average power of a hair dryer is 1800-2000 W).

You can remove any wallpaper with a steam generator

A powerful steam generator is very effective for removing thick and hard layers of liquid wallpaper. It will soften even those areas that a special liquid or a hair dryer cannot handle. But there is one very important point: When working with a steam generator, be sure to wear dielectric gloves. The fact is that there may be exposed wiring in the wall, and when working with steam, and even with power tools, this can become dangerous not only to health, but also to life!

Removing liquid wallpaper with a grinder

A disc sander will ensure 100% removal of liquid wallpaper, but... The fact is that such a power tool can be connected to a vacuum cleaner, as in the top photo, or without it. But if the dust is not sucked out from under grinding disc, then it will be possible to work only in a respirator (the density of the dust will be thicker than when cutting walls with a grinder).

Cleaning liquid wallpaper exposed with varnish

A homemade thresher is clamped in a drill chuck

But what to do if the liquid wallpaper is opened? paint and varnish materials(in 90% of cases, this is a clear varnish)? The problem is that such coatings will not allow moisture to pass through, and if you heat the layer with a construction hairdryer, you will have to deal with unpleasant smell. Therefore, first it is better to remove the paintwork at least partially and only then use some method of removing liquid wallpaper.

Below, in the video clip, you can see the process of beating paint with chains clamped in a drill chuck, but first I wanted to give a little advice. When working, never turn the drill with its left side towards the wall, as all broken fragments will fly up and fall on your head!

Video: Removing paint using an electric drill with chains

Conclusion

As you can see, removing liquid wallpaper from walls at home is not particularly difficult if you have the desire and the necessary tools for one or another method. Here you should pay attention to the fact that not all methods allow the reuse of material, but only those that do not contain any impurities - putty, paint and other construction waste.

One of the positive properties of liquid wallpaper is that it can easily be repaired and partially transformed. Due to its unique composition, damaged areas are quickly replaced with fragments, and it is not necessary to carry out complete dismantling, which saves you from unnecessary hassle and costs.

Over time, each coating becomes unusable, the color fades, erased areas appear, or the monotony of the interior becomes boring. In this case, you have to completely renew the appearance of the rooms; of course, the previous coating will have to be removed. In this article we will study how to update liquid wallpaper and what is needed for this. How to quickly remove liquid wallpaper from a wall for subsequent repairs, as well as what care is required for the coating.

It often happens that due to physical influences Damage to the coating appears, dust accumulates and dirt becomes visible externally. Many families with small children observe marks from pencils and felt-tip pens, abrasion of the surface, scratches, etc. appearing on the walls.

And in order to avoid full-scale repairs, you need to carry out natural and proper care with replacement of worn-out areas, guided by tips and recommendations.

Liquid wallpaper and dust. Due to its universal qualities, liquid wallpaper does not tend to accumulate dust, but over time, dust still settles and the surface loses its luster. You can use a regular vacuum cleaner. It is not recommended to clean the surface from dust with wet rags. Liquid wallpaper is susceptible to moisture absorption, and due to its rough structure, a damp cloth is not able to properly clean the surface and will even allow dirt to penetrate deeply.

Under no circumstances should various chemical cleaning agents be used. The product will spoil the appearance and destroy the structure of the material.

Liquid wallpaper is washable and not moisture resistant. It depends on the main composition and their processing. In places of direct contact with water, and in rooms with high humidity can be additionally treated with varnish. Any varnish for liquid wallpaper is suitable, so they acquire moisture-resistant qualities. Silk fabrics have better immunity to a humid environment, while cellulose and cotton fabrics have lower indicators; experts do not recommend using them near sinks and kitchen aprons.

Is liquid wallpaper washable? With additional surface treatment with varnish, the wallpaper significantly loses its breathable effect and the surface becomes glossy. Varnish is often applied topically to protect certain areas where water may enter. This surface is subject to gentle washing and wiping.

How to clean liquid wallpaper from dirt? If small but noticeable dirt and stains appear on the wall, these could be marks from shoes or food, you can use a regular eraser, lightly, effortlessly rubbing the area.

At greasy stains, and difficult to remove, you can trim the top layer, this can be done using a blade, carefully removing the top part.

If no way gives desired results, cases with ingrained dirt, the next step is to replace the damaged surface. In this case, you need to know how to remove liquid wallpaper, in a separate fragment.

How to remove liquid wallpaper from a damaged wall? For this, a sprayer is useful; use it to spray water onto the damaged area and wait for the moisture to be absorbed; the material will become soaked and you can proceed to removal using a spatula or plastic grater.

The varnished layer can be removed using the same method, but you will need longer time waiting for water to penetrate the structure of the canvas. When completely removed, it is permissible to dilute the water with detergents, but in the future the material will lose its properties and will not be suitable. The process of complete removal will take some time and effort, the work itself can be considered not labor-intensive, and if you soak the base well, there will be no difficulties. Use a steam generator by directing a stream of steam at the wallpaper. Speed ​​up your work. Even simple warm water, applied with a brush or rag, quickly penetrates the layers, and the surface can be removed.

Updating worn-out areas. You need to remove liquid wallpaper without sharp cutting, then it is advisable to retouch the edges.

We prepare the surface by completely removing the remains of old fragments. You can lightly sand and saturate the bare area with primer.

After all preparatory work we proceed to applying the material using conventional technology, adding required quantity onto the area and rubbing with a trowel, creating a single layer. This is how liquid wallpaper is replaced.

Observe the thickness of the applied fragment so that the thickness corresponds to the previous coating, and when filling the niche there is no bulge.

A new solution is applied to the local area, or perhaps there is a residue from a previous repair. You purchase a new batch according to the colors and markings.

It is also permissible to use a damaged piece of wallpaper if it is not heavily soiled and remains the same color scheme. They do not need to be removed from the wall, just soak the surface and evenly smear the damaged part.

Every time after repairs, remnants of the used material appear. In our case, reusing liquid wallpaper is acceptable, so a supply of leftover material will come in handy if the question arises of how to repair liquid wallpaper.

• The remains of the diluted mixture can be stored in two ways, frozen, this method will create inconvenience, taking up space in the refrigerator. After it is defrosted, the adhesive ability is restored. Repeated freezing is not advisable.
• Or completely drain the solution and store it dry. If necessary, it is also diluted with water, infused and it is possible to reuse liquid wallpaper. After drying, transfer the mixture into a plastic bag and leave for storage. The shelf life is unlimited.

How to refresh and update liquid wallpaper

When performing restoration work, or if you want to update the interior, you can always add decoration your walls.

To do this, you need to create a sketch and add a fragmentary drawing. We add a drawing in the same way, removing some of the old ones, adding new ones, according to your drawing and colors.

The engraving can be immediately applied to the old coating using a stencil. Which is attached to the base with tape and applied ready solution. The surface must first be cleaned of dust. If you are not confident in your actions, experiment on an invisible area and gain experience.

When repairing and installing liquid wallpaper, no difficulties arise; the material is very easy to use, pliable and has a lot of positive characteristics. Such a problem as how to update liquid wallpaper can be solved by everyone.

Video, testing the material for strength