Using laminate flooring today is one of the most popular ways to quickly and relatively inexpensively transform your interior. However, during its operation, questions about its renewal may arise, in particular, whether and how it can be painted. In this article you will learn about how to paint laminate flooring and how to do it correctly.

How to restore a floor covering using paints and varnishes

The laminate itself has some resistance to mechanical damage, but during operation it still develops scratches and abrasions that are difficult to remove. Actually the only one in an efficient way Only high-quality painting can solve this problem.

Advice: if you want to apply stain to the laminate and varnish it, it will be wrong. Under the layer of the latter, areas with putty applied to them will certainly appear to restore the coating.

Below we will figure out how to properly paint laminate flooring with your own hands without the involvement of specialists, and also whether it is possible to paint laminate flooring at all.

What is the complexity of the process

A special film is glued on top of each laminated board, which performs certain functions, in particular, it protects the material from moisture. At the same time, it does not allow the paint to reliably “stick” to the surface, i.e. no adhesion.

Very smooth upper part lamellas cannot reliably hold ordinary enamel. As a result, no matter how beautifully you paint the floor, it will peel off within a month. The paint will remain only in the recesses that imitate the texture of wood, and in the gaps between the boards.

What does laminate consist of?

Without an understanding of the structure of the material, it will be difficult to move forward to solve the problem. Therefore, this is what we will do now.

A laminated board consists of several layers, each responsible for a specific function:

1. Upper — protective coating is responsible for the product’s ability to withstand mechanical stress. Due to this layer, the floor remains intact for a long period, despite contact with rough shoes, pet claws and dirt.

It is made from boomoplast - paper that is impregnated with a mixture of corundum and melamine resin. Its strength depends on the content of the first component.

1. Decorative– made of paper onto which the required image is applied. Thanks to the embossing process, the layer can imitate the texture of natural wood.

1. Carrier- the thickest and densest layer. It is made from fiberboard or plastic. Equipped with a locking connection - groove or tenon.

1. The substrate for the laminate (bottom layer) is responsible for hydro- and sound insulation. It usually remains intact even when the coating wears out.

Whatever the price of the laminate, the protective and decorative layers begin to deteriorate first. Very rarely, some scratches may reach the supporting base. At the same time, it is the first layer that gives laminated boards their characteristic gloss. And it does not allow the paint to linger on the surface of the product.

That's why:

1. To successfully paint laminate flooring, you need to matt the protective layer to increase its adhesion.

1. Chips and scratches can be smoothed out by filling them with putty to a depth of 2-3 mm, i.e. the first two layers.

Technology

The instructions for preparing them for painting depend on the degree of wear of the lamellas. The process is complex, so it is better to split it into several stages.

Preparation

1. Clean the floor surface from dirt.
2. Use coarse sandpaper to remove damaged flooring.
3. Remove dust with a vacuum cleaner.

1. on wood and wait until it dries. After this, cover the damaged area again with putty until it is level with the surface.
2. Take medium-grain sandpaper glued to the foam rubber, and after the putty has dried, level the putty surface.
3. Clean the floor with a vacuum cleaner.
4. Prepare fine grain emery cloth for finishing work and carefully matte each lamella.

Advice: the main thing is this process make the surface of the laminate matte, rather than level it perfectly.

1. Vacuum the floor, soak a soft, lint-free cloth in a solvent such as white spirit, and wipe the surface of the slats.

Choose regular enamel for painting, for example, PF 226 or PF 115. Dilute the paint to liquid state also white spirit. Keep in mind that you will have to paint in several layers, so the material must not only be liquid, but also thoroughly mixed.

Advice: do not use a roller and do not forget to wear gloves and a respirator.

Coloring

1. Start painting the laminate from the board furthest to the door.
2. Paint using long strokes along the strip. In this case, the paint should be spread over the surface.
3. Try to paint the gaps between the boards.
4. After applying the first layer, it must sit for at least 24 hours at closed windows and doors.
5. Apply a second coat using the previous principle.

Tip: while painting, do not forget to periodically stir the paint in the jar. Otherwise, it will sit on the bottom, causing the floor to become stained. If this happens, apply another coat of paint to the laminate surface.

Conclusion

If your laminate flooring is damaged, do not rush to replace it, as there is an easier way to restore it. To do this, you can simply paint it with special floor paint.

On modern stage laminate is considered one of the most popular floor coverings. When the question arises about choosing a floor covering, most clients prefer laminate due to its availability and wide range of shades.

Another irreplaceable quality of laminated coating is its ease of assembly. Here's how to properly paint laminate flooring during repair work- almost no one knows.

Another advantage of the laminated coating is its fairly high strength and reliability, which allows the use of laminate in all types of premises, including those where there are always large crowds of people (restaurants, bars, offices).

Possible problems

But laminated surfaces, despite their strength and durability, have every chance of wearing out over time and losing their former appearance, so painting the laminate becomes necessary. This is when many people decide what to choose: laminate or linoleum.

You can also consider another option: you purchased a new home and you are not satisfied with the color of the flooring.

Is it possible to paint laminate flooring without losing either its basic parameters or its attractive appearance? Knowing the main rules for painting laminated surfaces, you can easily update flooring, both in the kitchen and in the dining room, in the guest room, or in the bathroom.

Important! After reading the instructions, you will understand that it does not matter in which room the flooring that you consider to be unsuitable is located, because it can always be repainted.

Especially for these purposes, professional finishers have developed instructions taking into account all aspects.

What to consider when performing work

Just pick up a brush or roller and apply the required layer of paint to the floor, this is exactly what most readers think.

On the topic: “how to paint laminate flooring” there are many instructional videos on the Internet that you can better familiarize yourself with. However, most of them are devoted to the intricacies of painting, and not to the basic steps.

• Laminate has a lot of advantages, but there are also disadvantages. One of the main disadvantages of laminate flooring is considered to be poor water tolerance.
• When using a laminate floor, remember that under no circumstances should you wet clean or treat the laminate flooring. chemicals. Of course, this advice applies to damaged surfaces where the protective layer is worn off or has deep scratches on it.

Advice! If liquid is accidentally spilled on such a flooring, the surface must be immediately wiped dry. Don't wait for the moisture to be absorbed into the texture!

To paint laminate flooring, it is better to choose paint with a small amount of liquid in the composition. Polyurethane or alkyd paints are excellent for these purposes.

• The laminate is covered with a wear-resistant film, and, consequently, the paint for the laminate should have the same properties. These are the qualities that alkyd and polyurethane paints. However, before applying the substance, be sure to test for its compatibility with the top layer of the floor covering on laminate residues.
• Before starting work, you need to clear the plane of debris. Remember that the flooring should not be stained, which can only be removed with sandpaper. Using sandpaper, you destroy the protective film of the laminate and create countless small scratches, which over time become clogged with dirt and water.
• Before painting, the laminate is sanded with “zero” sandpaper so that the paint has something to “grasp”, otherwise all the paint will “peel off”. After sanding, thoroughly clean the laminated coating from any dust that appeared during the sanding process. You cannot begin work until the floor is completely dry.

Advice! While the laminate dries, you can start protecting the walls from paint. Experts advise covering the walls along the entire perimeter with masking tape.

• After the wall is reliably protected from paint, you can begin to prime the surface of the floor covering. An oil-based primer is suitable for this.
• After applying it, you must wait a little longer before starting to paint the laminate.
• The next stage is painting the laminated coating. After completely finishing the floor plane, the paint should dry. After the paint has dried, you need to apply polyurethane, which gives additional protection laminate covering.

• The laminate undergoes a special factory finishing, during which melamine resin is applied, which makes the laminate moisture resistant. Therefore, for painting to give good results, use polymers that are compatible with melamine resin. It is worth noting that varnishes based on epoxy or polyurethane go well with it.
• In some cases, matte varnish is used, since it is also made on a polyurethane base. You can also use epoxy wear-resistant varnishes ESP 6730 without harm to the coating.
• The high cost of these materials guarantees good protection of the laminated coating, so it’s not worth saving. Compared to normal plastic panel, laminate has a more complex structure. This flooring is strong, stable, resistant to mechanical damage, and the laminate is easy to install.
• It is worth noting that the thicker the laminated panel, the better soundproofing qualities the coating will have. It is also worth noting that the thicker the coating, the longer the laminate floor will last. For example, average term The service life of a laminate with a thickness of 10 mm is 15 years, and 15 mm lasts more than 25 years. Also, a “thick” coating will eliminate the problem of creaking floors, because under its weight the dust is ground into fine flour.

Conclusion

Laminate flooring can be painted so as not to completely replace the flooring.

If you do not tint the laminate in a timely manner, it may soon become unusable and you will have to completely replace the floor covering, and purchasing a new floor covering can hit your wallet hard. A coat of paint improves the protection of the laminate flooring from water.

Many people wonder "" and whether it is even possible to do this. After all, it often happens that you don’t want to part with comfortable cabinets and shelves, even though they have lost their appearance and do not fit into the interior after renovation.

In principle, cheap laminated furniture is considered disposable, and it is easy to replace it with a similar one with a different color or shape. But situations are different, and handymen have learned how to restore and give a second life to cabinets and chests of drawers.

Step one: how to paint laminated furniture. Preparation

To work with a laminated surface, you need to remove all dirt and grease from it. For this purpose active detergents and solvents. After cleaning, you need to thoroughly dry and wipe all surfaces.

It is most convenient to paint horizontal surfaces; paint does not drip off them. Therefore, craftsmen recommend disassembling the cabinets and removing all shelves and drawers. If you plan to paint only the facade, then you don’t have to disassemble it, but simply remove it from the wall and put it in a position convenient for work.

The laminated surface of the furniture is covered with polyvinyl chloride: this is a plastic that does not allow water to pass through and does not hold paint. In order for the dye layer to adhere to the laminate, it is necessary to treat the surface with fine sandpaper. If there is damage or unevenness, they are hidden with putty and sanded again. To seal cracks, latex putty or epoxy resin is used.

Plastic dust is unsafe, so you need to wear a mask when working. After sanding, all dust is collected with a vacuum cleaner.
Before further actions, all fittings are removed or covered with masking tape.

In order for the painted surface to look smooth and the dye not to bubble, you need to carry out a thorough primer treatment. For this purpose, you need to purchase a polyurethane-based primer: it fits perfectly even on glass and tiles. There is no point in saving on this material; the success of the entire painting depends on the primer. Professionals recommend using automotive primer for greater reliability. It is sold in an aerosol can, which makes the work more convenient. It is necessary to allow the soil to dry completely, this will take at least twelve hours.

Step two: how to paint laminated furniture. Painting

For painting laminated surfaces, polyurethane and alkyd based paints are chosen. You can look for paints with a special label “for furniture”. Paint on epoxy based also gives excellent result, but it takes a very long time to dry and, in addition, it smells for a long time. There are reviews about the practice of painting laminated furniture with acrylic and latex paints. This is possible, but in this case the surface must be primed at least twice.

For painting you need to choose the appropriate tool: a roller with a velor surface. It does not create air bubbles, and the paint goes on very smoothly. For hard-to-reach areas, you need to prepare brushes with an angled tip.

If you have the skills, you can work with a spray gun. This significantly reduces paint consumption. You just need to adjust the pressure and diameter of the jet in accordance with the type of dye.

Furniture in the hallway and kitchen is highly exposed to moisture, dirt and temperature. In this regard, it makes sense to varnish the surfaces. It's better to choose acrylic varnish. Its only drawback is that over time it turns a little yellow, but this is noticeable only on light-colored furniture.

Some tips on how to paint laminated furniture:

1. Impregnation for laminated furniture should be of deep penetration, this will reduce toxic fumes from MDF and reduce paint consumption.
2. If the surface is painted unevenly and the paint has smudges and bubbles, the varnish will only highlight the defects.
3. If you can’t paint the facade of the furniture evenly, you can come up with an ornament or painting. This will help hide flaws.
4. For complex designs, use masking tape.
5. Each layer of paint should be allowed to dry thoroughly before painting again.
6. A long pile of a roller will make the surface textured, while a short one will make it smooth.

It is quite possible to give laminated furniture a second life, you just need to apply imagination and patience. But it is worth remembering that this can only be done once, the second MDF painting may not survive.

Good day. Help me figure it out. We have laminate flooring in our apartment. In some places, especially in the corridor, partly in the living room and kitchen, it has faded over time: light stripes have appeared, the pattern on individual planks has been damaged. I want to paint or varnish the laminate flooring, since I don’t have the money to replace it. How to do this correctly?

Laminate floor with damage.

Answer

Laminated multilayer coating was developed as an analogue of solid parquet and solid board. But this does not mean that you can work with it in the same way as with natural wood coating.

The issue of painting, according to some consumers, is controversial. But for experts, the answer is clear - no, you cannot paint or varnish a laminate floor. The reasons for such a categorical statement lie in the characteristics of the product.

The laminate consists of 4 layers:

Actually top layer is a type of thermoplastic that practically does not “stick” to paint or varnish. Of course, you can find special adhesive primers to create an intermediate layer, purchase polymer enamels based on PVC (liquid plastic for surfaces such as concrete, wood, non-ferrous and ferrous metal, thermosetting plastics). But the problem is that laminate is an independent type of prefabricated covering, that is, not connected to the subfloor. No glue or hardware is used during installation. The planks deform both under load (sag) and as a result of seasonal fluctuations in climatic parameters. And any varnish or enamel after polymerization forms a hard, not elastic covering. That is, painting the laminate does not make sense - after 1-3 months the paint (especially in the area of ​​​​the joints) will begin to crack, peel, and peel off.

Some “craftsmen” claim that it is possible to repaint a laminate floor. And for this, standard alkyd or nitrocellulose floor enamels (PF-266, NTs, etc.), tinted or transparent parquet varnishes with a low level of lateral adhesion of the dies are suitable. And in order for painting the laminate flooring to be a different color to be successful, you just need to sand the surface a little. We remind such “geniuses” that the thickness of the top layer does not exceed 200 microns. In addition, collections with embossed or corrugated surfaces are now popular. Remove a layer of 0.2 mm carefully without damaging decorative paper with a pattern printed on it is almost impossible. In addition, with the slightest load or change in temperature and humidity conditions, the formation of cracks and peeling areas is inevitable.

So the question is flawed from the start. It is much more effective and cheaper to restore the coating by partial dismantling, as shown in the video below. Or simply purchase decorative rugs that will perfectly hide various defects and add a unique charm to any room.

Advice! If you need repairmen, there are very convenient service by their selection. Just submit in the form below detailed description work that needs to be done and you will receive offers with prices from construction teams and companies by email. You can see reviews about each of them and photographs with examples of work. It's FREE and there's no obligation.

Today, laminate is considered the most popular flooring, which is installed not only in apartments, but also in offices, medical centers and other institutions. But even the highest class flooring is not durable and over time it may develop scratches and other minor damage. Replacing laminate flooring requires not only a lot of time and effort, but also a considerable amount of money in your wallet, but not everyone knows whether laminate flooring can be painted and what details need to be taken into account.

This is what a freshly painted surface looks like

It is stupid to renew the surface of the laminate when it has only recently been laid in the room. Usually, the owner of the premises comes to the idea of ​​repairing the floor only when the top protective coating has worn off or has deep scratches. In this case, do not forget that laminate without a protective layer is highly waterproof and excess moisture can be detrimental to it.

Accordingly, painting a laminated board should be done with paint that contains a minimum amount of water in its composition. Alkyd or polyurethane paints have these properties. In this case, the question of why paint a laminated board does not arise, since the answer is obvious - it is necessary to update the protective coating and appearance laminate

To paint laminate flooring, it is imperative to use alkyd or polyurethane paint compositions, since only they have the same qualities as the protective layer of the floor covering, which wears off over time and becomes unusable. The only thing you will need to do before painting the entire floor is to check the compatibility of the surface and the paint.

Preparing laminate flooring for painting

When the paint and brushes have already been purchased and are waiting in the wings, you need to start preparing the working surface. It is clear that you will not apply paint to crumbs, twigs, putty residues and other “delights” of the repair that remain on the floor. Otherwise, you don’t have to ask how and what to paint the laminate with.

The second step will be sanding the floor. This is done in order to remove the smallest debris from the surface of the laminate that could not be captured with a rag or washing vacuum cleaner. In addition, sanding provides the best adhesion of the surface to the paint. If you think this step is a waste of time, after a few months you will see your paint starting to peel off your newly painted floor.

This is what a cleaned laminate surface looks like

After the floor has been completely cleaned with coarse sandpaper, you need to do it again general cleaning from dirt and dust arising during the cleaning process.

Applying putty to the floor covering

Now we need wood putty, which must be applied in a very thin layer to a dry and clean laminate surface. The first coat must be completely dry before you need to apply the second and subsequent coats of putty.

You shouldn’t rejoice too early and run for a brush and paint, because after filling the laminate needs to be cleaned with medium-hard sandpaper. For comfort, you can take sandpaper glued to the foam rubber, since the floor will have to be sanded by hand.

The last step left is to sand each laminate strip with fine-grained sandpaper. The process is complex and time-consuming, but without it you will not get the desired result. Don't try to make a perfectly smooth base, your task is to make the floor matte.

Before painting, we again vacuum the floor to remove any remaining putty and small debris and wipe the floor with a lint-free cloth, which must be soaked in a solvent before use.

Applying putty to the surface of the laminate to remove small dents and scratches

The main work is done, now all that remains is to paint the laminate. Remember that laminate flooring is not like a barn floor where you can pour a can of paint and roll it over the entire surface with a roller. Such a scheme will not work here. For laminate flooring, only brushes should be used. Stir the paint well before use.

We start painting from the wall farthest from the doors. The strokes should be long and only in the direction of the board. It is important not to just “plop” paint on the laminate, but to completely smear it, not forgetting to paint over all the cracks. If you don’t have enough theoretical tips on how to paint laminate flooring yourself, you can watch a few more videos on this topic.

Painting laminate flooring with a brush

After the first coat of paint is applied, we leave the floor to dry for one day, while all windows and doors must be closed so that dust does not settle on the floor. After a day, a second coat of paint should be applied.

Very often, market sellers are asked whether it is possible to paint laminate flooring if it is damaged. Of course, to this cosmetic repairs you should not resort to unnecessary efforts, it is better to try to avoid scratches and dents of the board, but in the absence of desire and money for complete replacement floor, this exit will be ideal solution from the situation.

All rights reserved. Republishing materials is prohibited

Is it possible to paint laminate flooring and how to do it?

Laminate itself is a beautiful floor covering. However, after a certain period of time, when the coating loses its attractiveness and needs to be restored, the question becomes relevant as to whether it is possible to paint the laminate.

Regardless of sustainability of this material to mechanical stress, during operation scratches and abrasions appear on it, which are difficult to remove. The most effective option recovery old surface V in this case is painting.

As for how to update laminate flooring using stain and finishing varnish, this is impossible. This is due to the fact that before painting the coating should be restored with putties, which will remain visible under the varnish layer.

The main problem that arises in the process of painting such a surface is the lack of adhesion. On smooth surface panels, ordinary enamel does not hold up well. Because of this, the paint on the floor may peel off within a couple of months. It will remain only in the recesses and joints between adjacent panels.

To figure out how to update laminate flooring with your own hands, it would be a good idea to learn about the structure of the material.

First of all, it should be noted that this is a multi-layer coating and each layer in it performs a specific function, in particular:

• bottom part (backing)– responsible for sound and heat insulation. Typically, this layer continues to remain intact even with significant wear of the laminate;
• load-bearing base is the densest and thickest layer. It is made from plastic or fiberboard. On one side it ends with a spike. At the opposite end there is a groove for a locking connection;
• decorative layer, consists of paper with a textured image on it. Thanks to embossing, it imitates natural wood;
• top protective coating ensures the material's resistance to mechanical damage. Thanks to this, the laminate remains unharmed when in contact with water, shoes, etc. This layer is made from paper, which is impregnated with a mixture consisting of corundum and boomoplast (melamine resin). As a result, its strength depends on the degree of corundum content. As long as the protective coating is able to perform its function, the question of how to update the laminate at home does not arise.

The first layers to be destroyed are always the protective and decorative ones. Damage rarely reaches the load-bearing part. It should be borne in mind that the protective layer also gives the material a characteristic gloss, and for this reason paint does not adhere to the surface of this floor covering.

Therefore, before painting the laminate, the protective layer must be matted, since a matte surface has better adhesion. Chips and scratches can be eliminated by filling them to a depth of 3 millimeters (this is the thickness of the top two layers) with putty.

Surface preparation depends on how worn the coating is. If, for example, the question arises about whether it is possible to paint the laminate flooring in a different color, then such work will take less time and effort, since there is no need to eliminate significant defects in the flooring.

1. Washing the floor from dirt.
2. Damage to the coating is cleared with coarse sandpaper.
3. Dust is removed with a vacuum cleaner.
4. Apply thin layer wood putty, after drying - the next one and so on until the surface is completely leveled.
5. After all layers of putty have dried, the coating is treated with medium-grain sandpaper glued to the foam rubber.
6. The floor is cleaned with a vacuum cleaner.
7. Each plank is processed separately with fine-grained sandpaper intended for finishing work.
8. After matting is completed, the floor is vacuumed and wiped with a soft, lint-free cloth soaked in a solvent (for example, white spirit).

There's no need to do it perfectly flat surface. In order for laminate paint to adhere well, it is enough to achieve a matte finish - this is the point of preparation.

For painting, ordinary enamel is used, for example, PF115 or PF226. The paint is diluted to a certain state with white spirit. The consistency should be liquid and well mixed as it will be applied in several layers. If desired, you can paint the laminate a different color.

During the work, only brushes are used; rollers are not suitable for this work. You should definitely use protective equipment - gloves and a respirator.

1. Painting begins from the wall farthest from the door.
2. The paint is applied in the direction of the panel, in long strokes. Painting laminate flooring does not involve simply applying a coloring compound, but rather smearing it.
3. When painting, it is recommended to pay attention to the degree of painting of the gaps between the panels.
4. After applying the first layer, the surface dries within 4 hours with the windows and doors closed. This important condition Otherwise, dust will stick to the freshly painted surface.
5. A day later, a second layer of paint is applied using the same algorithm. It should also dry within 24 hours.

Is it possible to paint laminate flooring in three layers? The answer is yes if light spots are visible on the surface. The effectiveness of painting should be assessed after the two layers have completely dried.

It is important to stir the paint frequently and thoroughly as you work. If this is not done, it will settle to the bottom of the container, and the coloring will be done with a solvent, and the surface will turn out spotty.

After completing the work and completely drying the floor, it is recommended to wash the laminate - this way it will last much longer.

Painting this type of flooring is a fairly simple process compared to replacing it. It is generally accepted that if cracks, scratches or other defects appear on a laminated floor surface, it needs to be replaced. But in fact, laminate flooring can be restored by painting, and the floor will last much longer. And this is a considerable saving on repairs.

The question of how to change the color of laminate flooring is also often asked. It happens that after some time after the renovation you want to update the interior, and color scheme floor does not fit new design. It seems impractical to lay new flooring, because the laminate is still attractive and has no noticeable defects. Everything is very simple - it can be painted according to the above scheme.

This work is even simpler and faster, since there is no need to prepare the surface so carefully, covering up cracks and other defects. If you follow the instructions exactly and prepare the coating well for painting, the laminate will last for many more years.

Can laminate flooring be painted a different color?

Laminate is a durable and reliable floor covering, provided correct installation. However, any material wears out sooner or later. If scuffs appear on the floor, then the question arises: “Is it possible to paint the laminate, what is better to do this - varnish or paint?”

Expert opinion on the topic of painting laminate flooring

To understand whether laminate flooring can be painted a different color, you need to remember what the coating consists of. The very name “laminate” reminds us that this material is covered with a laminating airtight film, the so-called “overlay” (from the English “overlay” - coating). If you apply paint directly on top of it, there will be no adhesion and the color will quickly rub off. And if you remove this film for better adhesion, the laminate will lose its waterproof properties. In this case, you will have to apply a lamination effect varnish over the paint.

Therefore, you can paint laminate flooring, but it’s better not to. A painted floor will not look as aesthetically pleasing and will not last very long. It is better to renew the coating completely: the price of laminate is affordable, and even a beginner can install it.

If you do decide to renew your flooring, follow the instructions to avoid common mistakes.

• Prepare the surface thoroughly: remove furniture from the room, sweep the floor and sand it. The rough surface gives better adhesion to the paint.
• Protect the walls with strips of masking tape.
• Clean the floor, preferably with a vacuum cleaner, and wait until it dries completely.
• Treat the surface with a primer.
• Paint can be applied to a dry, primed floor.

Please note: laminate flooring cannot be coated oil paints and compositions for water based. Use them instead alkyd enamels and polyurethane paints.

• Apply the required number of layers of paint and wait until dry. Then coat the floor with a polyurethane or alkyd-based varnish.
• When the varnish is dry, you can place furniture in the room.

How to care for painted laminate flooring?

In order for your renovated floor to last longer, you need to take proper care of it. Remember that you now have not factory, but homemade covering, so it is especially vulnerable. After wet cleaning, wipe the floor dry, avoid high humidity indoors. Stiletto heels, heavy furniture, and carpets under which sand particles accumulate can damage painted laminate flooring.

To summarize: is it profitable to paint laminate flooring?

Painting laminate flooring is not the most efficient procedure, especially considering the time and paint costs. Therefore, we once again recommend that you think about whether such a change is worth undertaking. With the low cost of laminate and its easy installation best solution- change the coating. You don't have to breathe in the paint, wait for it to dry, or worry about excess water on the floor. Removing the old laminate and installing the new one takes a few hours. You will have a new, beautiful floor the same day.