Flaxseed oil is a natural substance obtained by cold or hot pressing of flaxseeds. Pure oil can be used on its own finishing coating, but in the untreated state it is ineffective due to its low ability to polymerize (dry).

When talking about impregnating wood with linseed oil, they usually mean using drying oil. This is a modified composition heat treatment and the addition of chemical additives that accelerate the polymerization process. Drying oil is also called “boiled” or “boiled” linseed oil.

Features of finishing with raw oil and drying oil

When treating wooden products with pure linseed oil, you should be prepared not only for long drying, which can take up to 3 days (for each layer), but also know a number of important features. The raw product is actively absorbed into the structure of the wood, so coating the wood with linseed oil has to be done in 5-7 or more layers. When it dries on the outside, it does not polymerize well on the inside, which is why a seemingly dry product can leave oil stains for a long time. Exposure to ultraviolet light significantly speeds up the drying process. In the sun, treated wood can dry out in 6-8 hours, but the tone of the coating will change: it will become yellowish or even slightly brown.

Drying oil, thanks to its high polymerization rate, has completely different properties: it dries quickly, is not absorbed so actively, and does not change its color. This makes it more practical to use. Regardless of the conditions, the answer to the question of how long drying oil dries is clear - no more than a day (at 20°C). This distinguishes it favorably from raw linseed oil. Further speaking about this type finishing, we will mean linseed oil.

Where is the best place to apply this finish?

Impregnation of wood with linseed oil does not provide solid protective film resistant to scratches and abrasion. But this view decorative finishing They are valued for other things, first of all - environmental friendliness, antiseptic properties, the ability to emphasize the texture of wood and preserve it from cracking.

Flax drying oil is used for finishing products used indoors. It is optimal for covering furniture surfaces that are not subject to intense abrasion, wooden walls and ceilings. She's being treated wooden dishes, children's toys. As a decorative and protective finish, linseed oil is appropriate to apply to the surface of valuable wood species to maximize the preservation of their natural qualities.

How to coat wood with linseed oil?

Preparation. The oil is applied to a dry and sanded surface. Wood moisture content should be at least 15%. It is recommended to carry out work at relative humidity air no more than 80%. When applying the composition to oily wood, the prepared surface is additionally wiped with white spirit.

Application. For work, use a brush, swab or lint-free cloth. The composition is evenly distributed on the surface and allowed to penetrate into the wood structure for 15-30 minutes. Excess oil that is no longer absorbed is wiped off with a rag or swab along the fibers. To avoid staining, ensure that the oil is evenly distributed on the surface.

Each new layer is applied after complete polymerization of the previous one with preliminary sanding. The number of layers required (in the case of drying oil from 1 to 4) depends on the specific use of the product and the type of wood (small-vascular species require fewer layers due to low absorbency).

The complete drying time for each layer is up to 24 hours.

How to restore oil coating?

Over time, the surface impregnated with linseed oil changes its color, begins to look dry, or wears off. This coating is short-lived, but this disadvantage is compensated by the ease of its restoration. When applying a second coat, the oil will hide all scratches and restore the visual appeal of the wood. If desired, linseed oil can be tinted with pigments to achieve the desired color shades. For products not subject to intensive use, the restoration procedure is carried out every two to three years.

What is oil wax and how to make it yourself?

Linseed oil with wax is an effective decorative and protective coating that gives wood high moisture-proof properties and increases its wear resistance. Impregnation adds a silky shine to surfaces and emphasizes the natural qualities of wood. Suitable for processing light and dark wood. Completely natural impregnation is optimal for finishing wooden floors, stairs, doors, furniture and other items subject to intense wear.

It is not difficult to prepare linseed oil and wood wax yourself. The easiest way: add grated beeswax to oil heated in a water bath and bring to a homogeneous consistency. The classic proportion by weight is 1:1. The ratio of wax and linseed oil can be varied, creating compositions of varying degrees of viscosity: from thick mastics to liquid impregnations that penetrate deep into the wood structure.

How to avoid spontaneous combustion?

The process of oil oxidation upon contact with air is accompanied by an increase in temperature, which can lead to spontaneous combustion of oil-vapor rags, tampons, sponges, etc. Before disposal, all consumables that were used for wiping off linseed oil should be thoroughly dried in a straightened state outside the room, or better yet, soaked in water or immediately burned. To store the dispenser and other tools in contact with oil, use airtight containers.

Oil impregnation is one of the simplest and at the same time effective ways protective and decorative processing wood Today we will talk about the types of oils, the differences in compositions for interior and exterior work, as well as the technique for impregnating wooden surfaces and wood products.

Wood oil - differences and classification

Coating woodwork with oil can be called, without exaggeration, the most environmentally friendly and safe way to process wood. This is because the oils contain either completely natural or inert chemical compounds. Let's make a small disclaimer right away: there are wood oils that contain volatile solvents, but after drying such a coating remains absolutely harmless.

Almost all wood oils are made on the basis of linseed oil, or more precisely, linseed or other natural drying oil. Characteristic feature This material has an extremely high tendency to polymerize. Pure oil is almost never used for wood processing. The drying oil base can also be hemp, tung or other origin, the main differences are expressed in the conditions that promote thickening and polymerization.

Oils vary greatly in their technical specifications: viscosity, density, type and content of solids, volatile solvents and special additives. All this not only affects the performance of the coating, but also completely determines the application technique and the nature of interaction with a certain type of wood. On the other hand, oils are also classified according to their decorative effect, that is, according to such characteristics as the intensity of the texture and the depth of change in the color of the wood.

Viscosity differences

IN carpentry There are about two dozen common types of wood, differing in density, porosity and vessel sizes. In each individual case, the oil must be selected individually, also taking into account the size, shape and specific features processed product. Please note that viscosity can only be adjusted with solvents when working with tung oil; other compositions absolutely do not tolerate this.

The thicker and more viscous the oil used, the more difficult it is to apply an even layer before polymerization begins. Working with thick oils requires greater care; the resulting drips are subsequently very problematic to remove. The advantages of thick oils are their high drying speed, comparable to some types of varnishes. Also, due to the high content of solid particles, such oils form a more durable film, providing protection from both mechanical damage and contamination.

Thinner oils are used to process products that either have a significant surface area or are replete with small parts with many hard to reach places. Low viscosity oils can be applied for quite a long time without worrying about uneven drying. However, to obtain high-quality protection, the product must dry for quite a long time; moreover, such oils are usually applied in 3 or more layers.

Decorative properties of oils

When choosing an oil, the visual effect of its application is of paramount importance. From this point of view, oils are divided into conditionally colorless and tinting. Why are oils called colorless only conditionally? Because in any case they change the color of the wood surface, but at the same time maintain transparency. Coloring oils include a colloidal suspension of coloring pigment - from white to soot, which somewhat muffles the contrast of the texture pattern.

Transparent oils always reveal the wood's texture differently. This is due, first of all, to the viscosity index. The lower it is, the smaller the pores of the wood can be impregnated. Thick oils show only the general pattern of the fibers, while rarer oils show fine details of texture. Thus, for treating oak surfaces, the oil should have a viscosity slightly below average, while rich, thick formulations are recommended for alder.

The use of tinting oils is in many ways similar to staining. Tinting wood with oil is quite rarely used as an independent processing technique. Much more often, such compositions are used to emphasize the soft veins between the hard fibers of wood or to cover individual elements furniture. After drying, tinting oil has less gloss than colorless oil.

It is not known whether such a property of oils as smell can be attributed to decorative qualities. In reality, all oils smell completely different, from haymaking to roasted seeds. After drying, the smell from the oil treatment turns into a very persistent, but subtle aroma, which can become a valuable part of the interior color.

Difference in solids and wax content

Despite their apparent homogeneity, wood oils are a colloidal system consisting of a liquid oil base and a suspension of solids. The latter are products of partial polymerization of oil, special additives (driers in oils for external use), resins and natural wax. You are absolutely right if you assumed that the content of solid particles in the oil increases its viscosity and density.

The high content of partially polymerized inclusions in the oil helps eliminate the effect of raising the pile when wetting the wood. By using rich, thick oils, intermediate sanding or polishing can sometimes be avoided entirely. There is one interesting trend in this: thick oils are ideal for large-vascular wood, where the formation of high pile is possible, while fluid compositions are better used for dense hardwoods, which are practically not prone to “shaggyness”. On the other hand, due to the dry residue content, the drying time of the oil is regulated.

The inclusion of dissolved wax in the composition pursues slightly different goals. Wax helps tightly seal the pores of the wood, providing it with excellent hydrophobicity. This type of waxing is mainly used in exterior decoration to protect wood from getting wet and dust accumulation in small pores. Another reason is that the wax is added to the oil by being dissolved in turpentine or some other volatile solvent. This gives rise to the problem of persistent unpleasant odor what's in living rooms highly undesirable. But there are oils in which wax dissolves when heated. These mixtures are unstable and the wax often precipitates, making the oil more difficult to apply. However, due to the high environmental friendliness of such a composition, it is possible to wax interior parts, but not for the purpose of protection, but to give a light tint and glossy shine.

Protective properties of oils

Unlike most protective equipment for wood, the oil does not form a dull film, maintaining the vapor permeability of the material. At the same time, the hydrophobicity of the surface increases significantly - upon contact with liquid water, the absorption of wood is practically zero. However, a wooden product remains susceptible to shrinkage and swelling; coating with oil does not eliminate these phenomena.

The protective effect of oil is to seal outer layers wood, thereby preventing the penetration of insect pests into the array. Due to the absence of paths for moisture penetration, the tree becomes least susceptible to organic damage by mold, mildew or blue staining.

Oil also preserves the color of wood well, which is especially important for exterior finishing Houses. The oil crust that forms on the surface effectively disperses sunlight and limits the flow of oxygen. Due to this, the rate of cellulose oxidation and the associated appearance of a grayish coating are reduced significantly.

All these properties are more pronounced the thicker the oil used for coating and the more layers are applied. Oils are characterized by the division of protection into two barriers: an internal one, achieved by impregnation of the pores, and an external one, formed when a thin oil film dries on the surface. It should be remembered that oil-impregnated wood has a higher thermal conductivity than dry wood.

Selection according to wood type

Wood oil is always selected for a specific species. It is recommended to have with you a trial piece of wood of the same type and quality of processing that is typical wood finishing. Test application even on small areas will help to quickly evaluate the behavior of the composition in contact with wood, as well as the decorative effect.

Let's start with the fact that everything conifers wood practically does not need to be impregnated with oil. If absolutely necessary, thick formulations applied in one layer should be used. This is due to the presence of a large amount of resins in the pores, due to which the wood loses its ability to absorb even fluid oils. Therefore it is necessary to achieve quick drying oils on the surface and in the surface layer.

Thick, saturated oils are also used when processing low-density wood (linden, alder), especially fruit species that have the most developed vascular system. There are no obstacles to impregnation with thick oil, while overly fluid compositions will penetrate too deeply and remain forever in liquid state, deprived of oxygen.

A completely opposite approach is used when processing beech, birch or sycamore. Because of high density Such wood is impregnated either with unmelted oil or with compositions containing a solvent. Often, when working with dense hardwoods, they are treated in a combination way: first with oils that penetrate well into the wood, and then with thick compounds with a high proportion of solids and wax.

Features of applying and maintaining oil finishes

The process of applying the oil is extremely simple, just follow the instructions for using a certain composition. But there are also general rules:

1. The wood must undergo chamber drying(humidity no more than 12-14%) and grinding the surface until tactile roughness is eliminated.
2. Application is carried out strictly in layers over the entire surface of the product, each layer must be completely dry.
3. Later deadline After application, rub excess oil with a dry rag, distributing it between areas with uneven absorption.
4. Oil is applied to all sides of the part in equal quantities, and surfaces with an open cut of fibers are no exception, despite increased speed absorption.
5. If, after the oil has dried, lint has risen on the surface, before applying the next layer, it is necessary to carry out preliminary grinding, otherwise, when the oil film is rubbed, fibers from the rag will also settle on the surface.

Oil impregnation maintains performance for 4-5 years indoors and 2-3 years outdoors. After these periods, the coating is renewed by simply thoroughly cleaning the surfaces and applying another layer of oil. The thickness of the oil is chosen depending on the degree of damage to the previous finish; usually these are fairly thick restoration compounds.

The natural wood from which most houses and bathhouses are built, hand-cut or the usual planed timber widely used in the construction of houses and bathhouses, has a pleasant light amber color. Many owners of houses and bathhouses made of logs and timber like the natural shade of wood and its color scheme, so as a rule they try to keep it unchanged. House made of hand-cut logs, carved logs of natural colors, natural shades wooden house made of timber are pleasant. Light, sunny, amber, autumn-saturated or light spring tones of wood do not reduce the spatial volume of rooms in the house, causing positive emotions from a feeling of harmony with nature, do not irritate, are harmonious and natural, like everything that is natural and not flashy.
But in certain cases There may be a need to change the original color of the wood due to some subjective or objective circumstances. The desire to change the color of wood may arise or may be necessary under the following conditions:

1. If there are possible flaws in the wood that need to be hidden or made less noticeable,
2. If desired, give it a regular wooden surface or a wooden object made from widely available and inexpensive wood effect woods VALUABLE breeds. Those. create a visual effect from wooden product made, for example, from pine, fir or birch, visually indistinguishable effect of solid wood of RARE and expensive species, such as oak, beech, ash, cherry, teak or any exotic wood species,
3. During restoration wooden furniture, made from rare and possibly expensive types of wood or to renew the protective layer of special waxes or varnishes that were previously applied to the wooden surface of furniture, block parquet, solid floorboards and had a certain shade, but over time during use they have worn out, worn out and need in renovation, partial or complete painting,
4. For design solutions when decorating a house where various color shades at the request of the customer.

To make it easier for the owner of a wooden house to solve the above problems, you can use various options their implementation. But the most correct, in our opinion, the most realistic, inexpensive, economical and environmentally friendly profitable solution may be the use of pigment and tinting paste introduced into oil or wax, i.e. colored oil for wood, colored wax for wood, as well as colored oil waxes pigmented in various shades or tinted with various colors of tinting pastes for wood. Oil and wax for wood are most consistent and close (related) to the wood structure, are not rejected by wood, do not flake off unlike many varnishes, do not peel off, are simply renewed if necessary, are easily and quickly pigmented (painted) in almost ANY required shade and color to the consumer, does not fade for a long time, creates WATERPROOF but VAPTOR PERMEABLE protection for the surface of logs and beams, and additionally STRENGTHENS the protection of wood from UV exposure. Assessing the fundamental advantages, benefits and undeniable positive qualities of colored oil and colored wax, many consumers are deciding what to paint with wooden house, how to paint a log house, how to paint timber, how to choose paint for wood, etc. most often they make a choice and purchase Colored wood oil and Colored oil wax.

If you want to get a certain color from a wooden surface or give an ordinary log, beam or floorboard the effect of valuable wood, then use Wood Oil pigmented with color for these purposes. colored oil, a colored wood wax that contains pigment, i.e. already pigmented in standard oil and wax colors or add your own to dry, oil-soluble or fat-soluble, which is supplied separately. The process of obtaining colored oil and colored wax in the shade you need is SIMPLE and convenient. ANY palette can be obtained practically at home by entering large number highly concentrated, color-fast pigment into regular oil and wax, wood oil or clear wood wax.
Another way to give wood the color you want will be even easier and cheaper than treating logs, timber and floorboards with colored oil and wax. You can treat any wooden surface that has not previously been treated with a moisture-protective compound (the treated wood must have open pores and the ability to absorb moisture!) and that you want to paint in a certain color using a regular water or alcohol base. Water stains They are sold in almost ANY hardware store, are not expensive, come in a variety of colors and are easy to use. But this method has significant disadvantage compared to applying pigmented oil waxes. The fact is that NOT ALL pigments have INCREASED color fastness. The most color-fast ones are natural earthen ones, which are most preferable for inclusion in oils and waxes for wood. Natural earth pigments and tinting pastes fade less and change color during use, i.e. When using them, the wooden surface painted and treated with them will retain the color you specified for a LONG TIME without significant changes. Some cheap types of pigments, including artificial ones, for sale in finished form in the form of stains can simply be diluted with water to obtain a colored solution of varying density and concentration. Low color fastness, ability to fade quickly and unevenly, non-compliance with the original stated or change color range and shade from the primary one increase costs when updating them frequently and reduce their time efficient work for protecting wooden surfaces.

←
←

Details about the advantages and disadvantages different colors and pigmented impregnations, find out on the individual pages of our website by following the links at the bottom of this page or by selecting a ready-made answer to your question in the " " or " " section in the site header. If you encounter any difficulties in selecting the necessary impregnations, call the numbers listed on the website and receive a 24-hour FREE consultation from our specialists.

Find out in more detail everything about finishing protective impregnations, wood oil, wax, floor varnish, paint and glaze on wood:

← impregnation

← impregnation

← "

← , Wood oil, Furniture oil, Furniture oil, Linseed oil impregnation

← . Wax for furniture. Furniture wax. Liquid wax and Hard wax for wood. Wax mastic.

← , Varnish for logs and beams, Floor varnish, Parquet varnish, Wood paint. Azure.

←

So as not to lose quality characteristics wood, it is recommended to treat it only with natural compounds. Various natural oils have been used for treating wood since the 12th century. In terms of its characteristics, linseed oil takes first place, as it not only protects wood, but also gives it a soft, velvety shade. How to properly use linseed oil for wood processing, the main stages and subtleties of the work in one short article.

When choosing how to treat a wooden floor or staircase, the environmental friendliness and protective properties of the impregnation are first taken into account. Impregnating wood with natural linseed oil has a number of advantages:

• An old product becomes aesthetically pleasing appearance, as small cracks, abrasions and unevenness are masked.
• Soaking in porous surface composition, gives it water-repellent properties.
• After drying, dust and dirt adhere less to the surface.
• Emphasizes the natural texture of wood.
• The oil has antiseptic properties and protects the surface from fungi, mold and blue stains.
• It is deeply absorbed into the wood and will last at least 50 years.
• Protects wood from cracking and drying out.
• Wood never stops “breathing”.
• Hypoallergenic and suitable as finishing in children's rooms and kitchens.

Linen is used to coat any wood products: in the processing of houses, when finishing furniture and decorative elements made of oak, teak, pine, spruce, fir. Due to its composition, the oil is easily combined with various tinting emulsions. Apply alone as a finish and protection or under further coverage varnish.

The only downside is the price, which depends on the manufacturer and the volume of impregnation purchased. The table below presents the most popular manufacturers of linseed oil for finishing work:

Which wood oil to choose depends on your financial capabilities. For processing wood will do unrefined product from any manufacturer. Imported flaxseed formulations are more expensive, but have additives in the form beeswax or artificial polymers. They reduce drying time and simplify work. Each manufacturer has its own consumption and depends on the thickness of the product.

To tint the surface, impregnation with colors is purchased. This can be found in the catalogs of the manufacturer Tikkuril, price from 750 rubles/liter. Translucent tinting with various natural shades. Using colored oil, you can tint an inexpensive type of wood, such as pine, or give the appearance of oak or mahogany. After processing, it will be difficult at first glance to distinguish inexpensive material from a similar premium class one.

Application technology

Each manufacturer's use is indicated on the label. But there are standard methods:

• Immersion - when wooden element immersed in a hot composition and left to soak for several days. Then it is taken out and dried on a warm surface.
• Vacuum impregnation - the product is placed in a special device, where, under the influence of a vacuum, the oil penetrates deep into the wood.
• Two-layer application - performed using a brush or a piece of foam rubber when finishing the premises.

Let's take a closer look at two-layer application, which is suitable for treating wooden floors, stairs and walls.

Two-layer application

To complete the finishing you will need tools and materials:

1. Oil.
2. Wax.
3. Wide tassel - flute.
4. Sanding paper of the finest fraction.
5. Cotton rags.
6. A piece of clean suede.

The product is first cleaned of the old coating, and the surface is sanded using sandpaper. Use a soft brush to sweep away dust. Prepared wood absorbs oil better, and the protective properties of the coating will be higher.

Before work, the oil is brought to a boil twice. Thermal preparation will reduce the drying time of the impregnation. You need to cook the flaxseed product in a water bath, in small portions. As soon as the oil boils for the first time, remove it from the heat and allow to cool. Then the procedure is repeated. Before application, the hot product is stirred so that the color is more uniform. Modern compositions with wax you don’t have to preheat them, but they will take longer to dry. Use hot impregnation with caution and wear protective gloves.

1. A brush or sponge is soaked in linseed oil, which is applied liberally to the wood using a blotting motion. Movements are performed along the fibers.
2. Within two hours, the surface of the wood is impregnated.
3. A second layer of hot impregnation is applied. The surfaces are allowed to dry for 2-3 hours.
4. Take a soft rag and use it to remove excess impregnation from the tree.
5. The surface is polished with wax or varnished.

Beeswax is heated in a water bath and rubbed hot into the wood until the surface acquires an even shine. But it is not necessary to cover the impregnation with wax, you can apply the old way polishing - using a thick suede cloth. Rub the surface with suede until it shines, using circular movements. But adding shine to wood is a long and painstaking process. For processing large area may take several weeks.

When using linseed oil to protect wood in your home, the application technology is followed. You will have to work with a heated product, so take care to protect your hands and eyes. By impregnating the wood, the oil will protect it from moisture, sun, fungi and mold. Small cracks will disappear on the surface, and the pattern will become clearer. To decorate inexpensive wood like oak or mahogany, impregnations with tinting effects are used, which can be purchased at any specialized store. For simple processing, the most inexpensive unrefined oil is suitable. It is advisable to wipe the top surface with wax or sand it until shiny with a suede cloth.

Wood color when surface treated with oil and wax based impregnations
Maslovosk ANTA series Standard, Maslovosk Premium and Maslovosk Leader Gold

Oil Wax impregnation for wood Anta Oil Wax does not contain any modifications of any pigments or tinting pastes and, therefore, Anta Oil Wax, when initially applied to the surface of wood of any species, practically does not paint the treated surface in any color.

← immediately for tinting Anta oil wax.
Select and buy ready-made pigment or ColorLak pigment paste.

After treating the surface with an impregnation based on oil and wax, Anta Oil Wax from the Eco Natur line, the color and structure of the wood fibers of the treated wood become slightly more contrasting and rich due to the filling of the wood capillaries with natural linseed oil and wood resins, which have a natural, barely noticeable, light sunny amber color shade. That is, processed, for example, Oil wax Standard the surface, while preserving the original shade and structure of the species of the wooden surface you have chosen, seems to saturate, deepen and slightly enhance the natural original color of the wood that it had before processing.

A deeper natural color of wood and the manifestation of a more saturated amber spectrum on a treated wooden surface can be obtained by introducing an additional amount of Oilwax various resins, which saturate the wood fibers and capillaries of wood with greater concentration during its processing. Almost any tree resin has its own characteristic color different shades and saturations. The visual effect of enhancing the color of wood is obtained by treating wood with the Maslovosko series PREMIUM And Leader GOLD, because these modifications of molovosk contain an increased content of various additional resins, which are responsible for increasing the wear resistance to mechanical abrasion of the surface and significantly improve the operation of the natural UV filters contained in these oil waxes, in contrast to the oil waxes of the Standard series.

Pigments significantly INCREASE the protection of treated wood.

The degree of protection of Anta Maslovosk impregnations is rated quite highly. The service life of the most commonly consumed oil wax - Maslovsk Standard, even in a colorless version, without introducing any pigments into it, can be up to 10 years! That's why Most of our consumers of natural impregnations, produced without the use of any chemical or artificial components, choose the natural color of the Anta Oil Wax impregnation and leave the wood the same color as it was created by nature itself.
It is known that the service life and quality protection of the surface of a wooden house made of logs and timber, sheathed with natural wood siding, blockhouse, imitation timber or simply planed boards, especially on external walls houses and baths, is largely determined and DEPENDS on the SPECIES of wood, its density, climatic conditions where the tree grew, where the forest grew or the area where it was harvested, the time of cutting down the wood for making lumber, etc.
Therefore, at first glance, wood that is almost identical in quality and color, even of the same species, or the treated wooden surface of houses made of logs or timber, can DIFFERENTLY maintain the quality of protection from UV or resist aging, wear, cracking, etc.

ColorLak pigments protect wood from UV and extend the life of Anta Oil Wax

One of the main factors in the destruction of wood is exposure to solar UV radiation.
Anta oil wax of the "Eco Natur" series was created as a protective impregnation with an absolutely natural composition, but with the highest possible wood protection functions.
Using only natural ingredients in the production of Anta Oil Wax is POSSIBLE, but it is quite difficult to obtain results that can equally compete or even surpass in the quality of protection and some indicators other oil-wax impregnations from well-known foreign manufacturers, in the synthesis of which SYNTHETIC, active or artificially created protective agents are used components, such as, for example, a composition of active synthetic UV FILTERS.
Oil wax Anta technologists did not pursue dubious results and introduce artificial improvers and reflective additives or UV absorbers into the composition of oil waxes, but used a simple, INEXPENSIVE, accessible and KNOWN, natural and safe way protection of wood from UV.
The best safe solution that does not violate the ecological balance and composition of Anta Oil Wax is the addition of specially processed, prepared and highly purified natural EARTH pigments from foreign impurities to the Oil Wax, if desired, to increase the degree of wood protection and significantly increase its service life!
The addition of specially selected and prepared high-quality NATURAL EARTH PIGMENTS to the composition of Maslovovsk Anta SIGNIFICANTLY increased the degree of protection of wood from the effects of UV destruction.

EVERYTHING IS SIMPLE: earth pigment is a finely crushed natural mineral, which itself already has a certain color, which COLORES the wood in the shade you choose.
Sun rays of various spectrums and ranges, including UV radiation, falling on wood treated with pigmented Anta Oil Wax, which contains microparticles of these colored earth minerals, are partially REFLECTED from them or partially ABSORBED by them, thereby preventing direct hit, and therefore the load of these rays on the fibers and structure of the wood.

Why you need to choose a pigment from the COLORLAC series.
Fifteen arguments in favor of pigments ColorLak:

• ColorLak pigments have a very FINE GRIND, which allows you to obtain a completely even and HOMOGENEOUS color over the entire surface without visible interlayer transitions and joining stains on ANY wood,
• ColorLak pigments mix easily with oil base ANY Oil waxes or even with other impregnations on natural or non-natural organic bases,
• Colorlac pigments are environmentally friendly and safe. Does not reduce the level of harmlessness of Maslovosk,
• ColorLak pigment is different high degree CLEANING from foreign impurities,
• Any ColorLak pigment is COMPATIBLE with each other, easily mixed to obtain various NEW color solutions or shades,
• The pigments produced for ColorLak and used for tinting Maslovosk Anta are practically NEUTRAL to the components of Maslovosk and most components of other impregnation manufacturers,
• Colorlak pigments DO NOT CONTAIN DRICKS, unlike high-quality pigments" artistic paints on natural oils"
  What is SICKATIVE you can find out here → Another company's opinion about DRICKS is described here →
• Does not contain components that cause ALLERGIES,
• Tested for compatibility with Anta Oil Wax and guaranteed to evenly paint the surface,
• Colorlak pigments quickly and easily dissolve when introduced into Anta Oil Wax; they do not require special mixers for tinting Oil Wax. EASY TINTING : entered - mixed - finished result,
• They have increased wear resistance and resistance to UV and fading,
• Better COLOR FASTness. Colorlac pigments are among the most light-resistant in their class,
• Colorlac pigments have a VERY fine structure. ColorLak pigments are NOT “PRUSHED bricks” or clay with dangerous salts! Kohler ColorLak DOES NOT leave “pellets” of undissolved pigment or “sand” which can get dirty after drying, so they do not require a large amount or concentration in the total mass of the composition,
  Convenient packaging Colorlac pigments - 100g And 500g. (in other containers - on order),
• Colorlac pigments have a higher concentration compared to pigments from other manufacturers.
  You SAVE SIGNIFICANTLY on the amount of pigment introduced per 1 kg of tinted composition,
• They do not require special storage conditions. They have an unlimited shelf life.
• The ColorLac pigment from Arichemie is practically not subject to degradation for a very long time,
• Not afraid negative temperatures. They can work and be added to the composition down to -35C! Certified for Europe and Russia.
  
  ColorLak pigments are manufactured and began to be supplied to our order by a world-famous company from Europe, Arichemie GmbH, after six months of testing and testing for compatibility with Anta Oil Wax.
  For tinting Anta Maslovak, color-fast pigments of the Vocaplast-MP and HelioColor-W series are used,

Why was Arichemie chosen as the manufacturer of PIGMENTS for OIL WAX?

• Arichemie GmbH is the largest pigment manufacturer on the world market.
• Many global companies that produce paint and varnish products purchase pigments from Arichemie, color their compositions with them, package and resell them under their own brand,
• Arichemie GmbH pigments are the most colorfast in terms of operating time,
• The Vocaplast-MP and HelioColor-W pigment series can be produced in the form of a paste based on natural oil, which eliminates harmful or active chemical components. The tinting paste contains only pigment and natural oil,
• Arichemie GmbH pigments of the Vocaplast-MP and HelioColor-W series are balanced with Anta Oil Wax and do not violate the ecological basis of Anta Oil Wax,
• Pigments from Arichemie GmbH are convenient and easy for DIY tinting of any oil-based composition. To give the desired tone or shade to the tinted composition, NO SPECIAL EQUIPMENT or conditions are REQUIRED. The tinting process can be performed anywhere: enter the required amount of pigment - mix - get the finished result,
• Pigments of different colors MIX EASILY. In this case, you can get a very large number of intermediate shades and tonalities,
• The high concentration of Arichemie pigments makes it possible to reduce the amount of pigment introduced into the composition being tinted by several times. You SAVE significantly compared to even cheap pigments,
• Regarding the proportionality of the amount of pigment consumption to the share of the tinted composition when calculating the tinting of the composition per 1 m2, Arichemie pigments are cheaper and more economical,
• Arichemie GmbH pigments of the Vocaplast-MP series, as well as HelioColor-W, have a very fine grinding in their structure, which makes them much more advantageous than other manufacturers.
• The Vocaplast-MP and HelioColor-W series of pigments are easily dissolved in oil-containing compositions and do not leave heterogeneous streaks and clots that can crumble on the painted surface,
• Arichemie GmbH products are not afraid of negative temperatures; these pigments can be stored at MINUS temperature, they are not afraid of freezing, do not require specially prepared warm storage facilities and warehouses, and have an almost unlimited shelf life, which is regulated only by the period of the issued certificate.

COLOR PALETTE OF PIGMENTS ColorLak

TD ColorLak, together with Arichemie, has developed and offers READY-MADE SOLUTIONS for tinting Anta Oil Wax, represented by high-quality concentrated pigment pastes of various colors and shades.
Below are samples of wooden surfaces on PINE wood that were treated with PIGMENTED Anta Oil Wax.

For a better assessment of color rendering and a better visual perception of the entire color gamut of our available paints on treated wooden surfaces with tinted Maslovosk, our specialists have prepared for you several options for test samples that were made in various ways(for example, scanning paint samples on a high-performance and high-quality SCANNER in the highest possible quality to minimize color loss when scanning a sample, or obtaining “live” photos from painted samples in NATURAL DAYLIGHT with a professional camera with high resolution and with NOT distorted color rendition, which occurs when shooting on cameras with a bad matrix) before posting them on our website.
We understand that different MONITORS can transmit color differently, and scanners and cameras that were used to record color and obtain finished results before posting photos of colors on the site can also give a slight difference in saturation compared to real flowers when viewing a sample live. Therefore, WE RECOMMEND that if your home computer monitor has a low resolution or a “weak” color rendering matrix, USE any TABLET or the screen of a good SMARTPHONE and you will receive colors when viewing that may be practically no different from real samples.

Samples are SPLIT and colored: LEFT edge - 6%, RIGHT edge - 10% pigmented Oil wax ANTA
To ENLARGE the size of the picture, CLICK on the selected PHOTO
Oil wax Anta WITHOUT PIGMENT
color WHITE(supplied dry)
color ROSEWOOD. (Black)
color WENGE
color NUT
color OAK
color COGNAC
color MAHAGON
color CHERRY
color BEECH
color GOLD(Yellow)
color RED

VIDEO instructions on how to tint Maslovosk.
Watch VIDEO on how to add PIGMENT to Anta Wax Oil
for surface treatment under VALUABLE WOOD

The process of tinting colorless Oil Wax ANTA is VERY SIMPLE. Self-pigmentation of oil wax can be done and is possible at any time of the year, at ANY TEMPERATURE and regardless of when you plan to use the finished COLOR Oil wax for its intended purpose, because Its shelf life is practically unlimited if stored in a tightly closed container and at a low temperature, and takes 5-10 minutes.
For a better understanding of the simplicity of the process of self-tinting Anta Oil Wax in desired color or to obtain, when applying pigmented Oil Wax Anta, the effect of VALUABLE WOOD from conventional pine boards, we have prepared for you detailed VIDEO INSTRUCTIONS on how to make STANDARD oil wax from colorless Oil wax and pigment paste ColorLak Tsvetnogo Oil wax Anta in just 10 minutes.
← to WATCH THE VIDEO of tinting OilWax Anta

CALCULATION OF THE Amount OF PIGMENT for tinting OilWax Anta in STANDARD factory packaging:

TD Color-Lak, when introducing pigments into Oil Wax, RECOMMENDS that in order to obtain the MAXIMUM effective color rendering and naturalness of the shade of the tinted wooden surface in the desired color, adhere to the proportion of pigment to one part of Oil Wax - from 5% to 12%.

Those. in practice, for 1 liter of Anta oil wax you need to add only 60 - 100 g of pigment from the ColorLak series.

1. Oil wax Anta 2.5l- to receive 6% 150g PIGMENT
2. Oil wax Anta 5.0l- to receive 6% Pigmented OilWax REQUIRED 300g PIGMENT
3. Oil wax Anta 2.5l- to receive 10% Pigmented OilWax REQUIRED 250g PIGMENT
4. Oil wax Anta 5.0l- to receive 10% Pigmented OilWax REQUIRED 500g PIGMENT

BUY PIGMENT for tinting Maslovsk from ColorLak

Price PIGMENT The ColorLac series of Arichemie GmbH consists of 5.50 RUR for 1g

← Place an ORDER and BUY Colorlac PIGMENTS

Pickup points for OIL wax and PIGMENTS:
- G. (any quantity, consultation with a technologist)
-at our other points and pick-up points PIGMENT ColorLak is supplied TO ORDER or by agreement.

when ordering PIGMENT together with Oil wax from 10 kg

EXAMPLES of processing wooden houses with ColorLak PIGMENT PASTES. PHOTO.

• EXAMPLE of applying Oil wax and WHITE PIGMENT to a log house in a ratio of 13-15%

• EXAMPLE of applying COLORED oil wax in COGNAC color.
  Tinting a house made of timber in the tone "COGNAC" Anta oil wax with ColorLak pigment

Treating a house made of profiled laminated veneer lumber with an antiseptic impregnation on an oil-wax basis Maslovosk STANDARD with a pigment of "COGNAC" color in a ratio of 6%. The oil wax was applied with a Felt Mitten.
- The assembly of a house from profiled laminated timber with a section of 200x150 was carried out by Terem-Grad on May 24, 2015.
- Treatment of the walls of a wooden house made of laminated veneer lumber was carried out after preliminary GRINDING of the timber with sandpaper No. 150 manually carpenters SK Terem-Grad with subsequent primary application fire retardant composition PIRILAX-LUX or ANTEX-PREMIUM with a consumption of fire-retardant antiseptic impregnation from 250 g/m2.
- After 10 days, the house was treated with Anta Oil Wax with Cognac pigment. The consumption of Anta Oil Wax was 70 g/m2.
- Independent customer comments about our work on GRINDING a house made of timber or the quality of work on applying Oil Wax, reviews about the quality of the Oil Wax composition, the quality of PIGMENTS, the results of Oil Wax in PROTECTING the house from moisture, UV, cracking, etc. you can receive from the customer of this house by e-mail:
Vladimir Vlasov MO, Istrinsky district, village. Buzharovo.

Click on the photo to enlarge the picture full screen