Modern frameless soft chairs “pears”, “balls”, “cubes” are not only an extraordinary piece of furniture, but also a very functional thing. This chair can be easily used in any room, as well as outdoors (for example, made of leather or waterproof fabric). Adults and children are not averse to sitting comfortably on this soft seat. At the same time, a “plastic” chair can be easily given the desired look. And if the seat is not in use at a particular moment, it can be easily stored in the closet.

Original frameless chairs are now sold in a wide range of models, colors and sizes. By the way, if you wish, you can easily make such a chair according to own design with your own hands. The main thing is to choose a suitable (strong, long-lasting) material for the upholstery, and also know what to fill the bean bag chair with. Let's talk about the latter.

What to use as a filler?

How to stuff a bean bag chair so that it is soft, comfortable and durable? IN furniture industry Various furniture fillers are used from standard foam rubber and cotton wool to polymer materials.

A hand-sewn bean bag chair can be filled with a mass of small polystyrene foam balls. The material is quite light. Chairs stuffed with polystyrene foam granules can be easily changed to any shape; they immediately take the shape of a person when the body comes into contact with the surface. It is very comfortable to sit or lie on a soft pouf.

Read also:

Expanded polystyrene fillers have undoubted advantages:

• they can be used to fill a bean bag chair of any size and design;
• allow you to create any desired seating shape;
• fire resistance;
• moisture resistance;
• low thermal conductivity;
• hypoallergenic;
• environmentally friendly;
• high practicality;
• relatively low cost of material.

Expanded polystyrene granules are very airy. But, unfortunately, this leads to the fact that during use the foam balls can become wrinkled. Therefore, after some time the chair will shrink some. Those who have experience homemade For such seats, it is recommended to fill the bean bag chair with a mixture of polystyrene foam (60-70%) and synthetic down (30-40%). This will ensure better volume of the product and increase its self-healing properties.

Synthetic fluff is widely used in the manufacture upholstered furniture, bedding, outerwear, toys. The material is soft and light, but at the same time elastic and voluminous. Fillings for furniture made of synthetic fur technical specifications They are in no way inferior to real bird down. In addition, material:

• elastic;
• has thermal insulating properties;
• does not cause allergies;
• moisture resistant;
• breathable;
• non-toxic;
• does not absorb odors;
• washable;
• has an orthopedic effect.

Synthetic fluff is sold in the form of a cotton-like mass or as siliconized balls. The last type of filler is just suitable for making a mixture with polystyrene foam balls.

What else can you fill a bean bag chair with? As a filler, you can use natural substances, for example, wheat grains, hay, buckwheat husks. True, all natural fillers have one negative property compared to synthetic ones: they are susceptible to moisture. Because of this, natural fillers have a much shorter service life. If you use the pouf frequently, its “filling” will have to be changed every six months or a year.

What if you try to make something out of furniture with your own hands? Interesting? Let's start by making furniture that doesn't require a frame, for example: from a bean bag chair (or, as it is also called, a pear chair).How to make a bean bag chair with your own hands at home? Pledge great result your work is initially correct make patterns and find good filler. You select the fabric (color, texture) to your liking, not forgetting the harmony of the future pear-shaped product with the rest of the furniture in the house.

The most important advantage of this bean bags self made the fact that it itself is light and freely takes the shape of the body of a person who wishes to rest on it. Therefore, it is very comfortable. You can even lie down on it, fluffing it up like a pillow. People who spend a lot of time “on their feet”, or sitting for hours in the office, perfectly relax and rest their back muscles when they sit in bean bag chairs. And what delight this furniture causes in children! Be sure to take your child as an assistant when you start making a bean bag chair with your own hands.

The next important point is filler. The most popular of them now is polystyrene chips, the granules of which are 1.5-5 mm. If you use it as a filler, then you will never sit in a “cold” chair. This applies specifically to crumbs, and not to foam plates.

As an option, order crumbs from an online store (cheap and fast). And with the rest you can fill decorative pillows and soft children's toys.

It will be great fill chair bags not with traditional polystyrene foam, but, for example, with hay soaked in the aroma of hot summer or some fragrant grass. You just need to keep in mind that such fillers love rooms without high humidity. This filling is changed every 6-12 months if products made from it are used a lot and often. Therefore, the bag itself should be easily removable to replace the filler.

One of the covers that makes up a bean bag chair (or pear chair), should be made of raincoat fabric or thick mattress fabric, the second cover should be their beautiful furniture fabric or denim, suede, faux leather and even velvet. You should not take expensive fabric for the outer cover, since with cheaper fabric the cover can be changed as much as you like, and each time you will have a “new” chair. So it’s worth thinking about whether we need to pay in online stores for the super abrasion-resistant fabric they advertise, if we have the option of inexpensive, but different and always “fresh” covers?

A strong metal zipper 50-60 cm long is usually placed on the outer cover of the bean bag chair. Best place its location is at the bottom of the chair, otherwise it may break if there is excessive load on the chair. If you don't like the zipper, sew on a few buttons.

By turning on your imagination, you can vary chair bag from a very large pillow to comfortable mattress; it can be like a chair with a back, if you arrange the pillow in a triangle, and a comfortable mattress.

Before you start directly manufacturing the product (upholstered furniture), we recommend that you do small pattern on paper to scale to check if everything fits.

The seams on the covers must be strong, the same as on jeans, using reinforced threads in order to withstand heavy loads.

We sew a chair bag (pear chair, cushion chair) with your own hands . Master class with step by step photo instructions and pattern.

Comfortable frameless upholstered furniture, made by yourself. Master class on making a beanbag chair.
Next article.

If you decide to make soft ottoman, which takes the shape of the body depending on the position of the person, you will have to buy fabric for the outer and inner covers. In addition, it is important to choose the right filling for the bean bag chair. You may also need this if you own such a purchased accessory. Over time, the composition tends to cake and decrease in volume, and the chair ceases to be comfortable and attractive as it was at the beginning.

Accessory manufacturing technology

So, you decided to make a bean bag chair with your own hands. The filler is essentially the most important. It is he who determines how convenient and comfortable your vacation will be. However, in addition to this, you will need the following:

1. Make a cover for the filler. It is better to sew the first products using simple patterns, choosing the shape of a cylinder, sausage, or ball. After mastering them, you can create complex products in the form of a pear, other fruits or animals.
2. Sew the outer cover. It is important to choose the right material here. It should be strong, durable and easy to clean. This is especially true if there are small children. Do not forget that during operation the seams, as well as the base, will experience heavy loads, so you need to use the appropriate threads. It is better to make several external covers so that you can change them appearance frameless furniture and wash the product at the same time.
3. Don't forget to sew zippers into the outer and inner covers.

So, here is a finished bean bag chair. How much filler do you need to provide yourself? comfortable stay? Usually the inner case is filled to 2/3 of the volume. This option is the most optimal.

What filler can you use for a bean bag chair?

In fact, when making frameless furniture at home, they use various materials having a loose structure. Substances can be of both natural and artificial origin. If you are a lover of natural, eco-friendly things, choose any option from the following list:

• peas;
• beans;
• beans;
• cereal;
• buckwheat husk;
• feather;
• wood shavings.

Advantages and disadvantages of natural fillers

These materials are absolutely harmless, but such filling for bean bags will cost a lot. In addition, for such a thing, the humidity conditions in the room must be met.

In too damp areas the natural composition may deteriorate: it will become moldy, fungus will appear, and insects will appear. This is especially true for suburban premises, country houses. Such a chair may also attract the attention of rodents.

Wood shavings must be carefully sorted so that there are no small splinters inside that could cause splinters. The best option is cedar filler. It gives a pleasant aroma and repels pests. Feather filling is not recommended for use if you have health problems such as allergies. So it is necessary to compare the advantages and disadvantages.

Synthetic filling for bean bag chairs

The most commonly used and popular composition is polystyrene foam in granules, in other words, polystyrene foam. It is sold in the form of balls packed in a bag. It is usually packaged in 100 liters. It will take about four bags to fill a frameless chair for an adult.

Price per package different manufacturers and sellers can start from 400 to 700 rubles. The diameter of the balls also differs from 1-2 to 4-5 mm.

This filling for bean bags, although of artificial origin, is quite safe for health. It does not harbor insects and does not require special conditions storage It is very hygienic as it does not absorb sweat, dirt and moisture.

The only drawback is the difficulty of pouring the balls from the bag into the case. A funnel made from the top of a plastic bottle will help greatly simplify the process. It needs to be inserted into a hole of the appropriate diameter made in the package, and the contents should be poured into a bean bag chair. This should not be done in the presence of children.

During operation, granular foam can cake and decrease in volume, but there is always the opportunity to add or replace the contents of your frameless friend.

So, you have found out what kind of filling you can choose for a bean bag chair. Use any option that suits you to update an old product or create your own original and comfortable leisure accessory.

The relaxation effect in a pear chair can only be achieved with high-quality filling. It must carefully envelop the body, while at the same time holding it, preventing it from clumsily falling through.

What is the best filling for a frameless chair?

Manufacturers of this furniture most often use granules as a filler for their products. They are sold in polyethylene containers of 100 liters. The cost varies from 400 to 700 rubles. To fill a bean bag for an average-sized adult, you will need about 400 liters of granules. Since the mass of foam balls is small, in weight terms it will be only 5-6 kg.

Expanded polystyrene granules are good because they are highly hygienic: they do not absorb sweat, dirt, or odor. These elastic balls can withstand repeated loads, but if necessary, this filler is easy to replace. The granules are non-hygroscopic and insects will not grow in them. In short, from any point of view, expanded polystyrene chips are the optimal choice for making frameless furniture.

What else can be used as a filler for a bean bag chair?

A more exotic option for filling for frameless furniture is legumes: rice grains, peas, beans, beans. For those who seek to surround themselves with environmentally friendly things, this is an excellent alternative to polystyrene foam. However, you should know that in this case, there must be normal air humidity in the room where the bean bag chair is located. At elevated temperatures, even well-dried legume grains can become moldy, since organic matter is very hygroscopic. In addition, if frameless furniture is in the countryside, various bugs may appear in it. Legumes may also be of interest to rodents.

Bird feathers can be used as filler for a bean bag chair. wood shavings. They must be well dried, especially for feathers: wet ones have a specific smell. If you have allergies in your household, this type of filler is not recommended.

When choosing shavings, you need to be careful: carefully inspect the filler and remove all thin chips from it, thereby minimizing the risk of getting a splinter. Optimal choice– cedar shavings. It has a pleasant healing aroma and repels insects and other pests. When purchasing a bean bag chair, you need to think in advance about

Frameless furniture is very popular. Its basis is the filler, with the help of which the chair or ottoman holds its shape. To prevent the filler for frameless furniture from spilling out after cleaning or when moving, you need to make a cover from thick fabric. Preferably in duplicate.

Most people put convenience in the first place in the interior rather than presentability. Designers take this fact into account when creating furniture, which is why frameless models have now come into fashion. Bean bags, ottomans, sofas and mattresses without a rigid base are loved by almost everyone. Their appearance is varied, and in terms of convenience they have no equal.

The main function in frameless furniture is played by the filler. He can be anything. It all depends on the imagination of the designer and the desire of the client who orders the model. Fillers are necessary in the manufacture of several options for comfortable furniture:

• Ottomans - they are comfortable and can be used in any room and interior as a chair, footrest or mini table;
• Bean bag chairs - designers make them in various forms. Most often they are purchased for a children's room. Adults also love them: at various trainings and similar events, the participants are often offered bean bags instead of chairs. Many antique cafes prefer frameless models;
• Chair-cushion - a round or rectangular volumetric pillow can be used as a lining on a hard seat or as a separate piece of furniture;
• Transformable upholstered furniture - beds and sofas, consisting of separate soft blocks, perfectly complement living rooms and bedrooms;
• Mattresses - springless models are increasingly found on sale.

The length of use of the furniture depends on what filler is inside. One material can last quite a long time, while the other will have to be changed frequently.

Bean bag chair

Cushion chair

Varieties

There are a lot of fillers for frameless furniture. Each has its own characteristics. The price for each material is different, so not everyone can purchase some types. Some materials are not suitable for allergy sufferers, while others are not suitable for use in the country.

Natural

For those who do not want to use chemically produced materials, there are familiar natural fillers. These include:

• Wood shavings and sawdust - waste from pine or cedar is most often used. These materials have medicinal properties. The pleasant woody aroma relieves headaches and repels pests: rodents and insects. This material wrinkles and will have to be changed from time to time;
• Down and feathers - air material, which will take a lot to fill a pouf or chair;
• Horsehair - this material makes furniture hard;
• Wool - the down of rams and sheep makes furniture that is pleasant to the touch;
• Buckwheat husks – pillows and mattresses filled with buckwheat or its husks are very popular. If you fill a chair or sofa with material, it will turn out very comfortable place for relaxation.

Natural fillers have one advantage - the absence of harmful chemicals. There are several disadvantages: they cause allergies and quickly deteriorate. Use frameless models filled with natural materials, not recommended.

Horsehair

Buckwheat husk

Wood shavings and sawdust

Synthetic

Can be used to fill frameless furniture different materials artificial origin:

• Expanded polystyrene is the most popular filler, which is balls. small size. Foamed and elastic granules create additional volume and are lightweight. Through this filling, an orthopedic effect is created;
• Polypropylene - strong and durable plastic peas quickly recover after stress. They are rarely used due to the fact that in case of accidental fire and smoke they release harmful substances;
• Polyurethane foam is an elastic material, not allergic. Foam can retain its shape long time. Along with such filler, it is recommended to use leather covers;
• Holofiber is a lightweight filler used together with any other artificial material. Furniture filled with holofiber is soft, and if it is supplemented with expanded polystyrene, you will get the most comfortable model for relaxation. This material does not cause allergies, does not react with water and does not absorb odors.

Sofas and armchairs stuffed with artificial balls can be used outdoors, because plastic does not absorb water. All materials of non-natural origin quickly restore their shape and do not cause allergies. It is very comfortable to rest on frameless furniture, the fillings of which are made of plastic.

Holofiber

Polyurethane foam

Expanded polystyrene

Down and feathers

Polypropylene

Available means

Almost any material can be used as a filler for a frameless chair or sofa. If your financial capabilities do not allow you to purchase synthetic balls, then you can use what you have in the house. These can be a variety of materials:

• Cereals - everyone has several bags of rice or buckwheat in their house. Particularly thrifty housewives store buckwheat in bags, so filling a couple of pillows with safe and edible material is quite possible without much expense;
• Legumes – if you are an avid gardener, then you probably have more than one kilogram of beans, peas or lentils stored. You can not only cook delicious porridge from legumes, but also make an orthopedic mattress or pillow;
• Seeds and dry grass - such materials are suitable for filling any furniture;
• Torn paper - if too much waste paper has accumulated in the house or country house, then it can be put to good use by making several pillows for relaxation;
• Pieces of foam rubber;
• Remains of fabric and yarn - grandmothers and handicraft mothers always have a lot of scraps from sewing or knitting. With such filling, the chair will be moderately hard and not too soft;
• Vata - a chair filled with cotton wool will be very soft at first. To prevent it from turning into a dense lump, it is enough to shake it and dry it from time to time.

There are many options for filling furniture. The main thing is to choose the right fabric for the cover. Balls, hay and seeds can spill through the thin fabric. The fabric must be strong and dense so that the threads do not break under the weight of the material.

Remnants of fabric

Filling rules

If you purchased a ready-made cover for frameless furniture, then a filler is always included with it. Most often these are small plastic balls. It is not always possible to fill a case with high-quality filler. Usually the kit includes an additional case into which you can place a bag of balls and carefully pour them in. If there is no additional cover, or the hole is too small, then filling frameless furniture will be problematic. The following instructions will help correct the situation:

1. Take an empty one plastic bottle with a narrow throat;
2. Cut off the bottom and neck;
3. Insert the narrow part of the bottle into the bag with filler and secure it with rope or tape;
4. Dip the other part of the bottle into a furniture cover and secure it;
5. Turn the bag with the filling upside down and carefully begin pouring the balls.

If you do everything correctly, not a single ball of polystyrene foam will end up on the floor. There is also another option for filling frameless furniture, which anyone can do. For this option you will need a clean vacuum cleaner and a nylon stocking.

How to fill:

1. Separate the brush from the vacuum cleaner tube;
2. Pull a nylon stocking over the pipe;
3. Open the bag of granules and unfasten the lock on the inner cover of the frameless sofa or chair;
4. Hold the vacuum cleaner pipe well with one hand and press the power button;
5. Place the end of the pipe into a container of polystyrene beads. Pieces artificial material will instantly stick to the sock;
6. Turn off the device;
7. Carefully place the vacuum cleaner hose in the case and shake it a little so that the balls fall off.

Repeat the procedure as many times as necessary to transfer all the filler. This option is suitable not only for filling, but also for removing excess balls in the case if you suddenly poured too many of them.