Decorating a table lamp shade. Original do-it-yourself lampshades and lamps

When you want to change the decor in your apartment and add a little originality to it, start with the little things. Try changing the lampshade, and you will be surprised at the transformation of your family nest.

And if you manage to find an original model that differs from analogues, then the changes will impress not only you, but also your guests.

Is it true, unique lampshades they cost a decent amount of money, because you can’t buy one-piece works by famous masters for pennies.

But no one is stopping you from creating your own unique masterpiece from cheap, and sometimes even waste materials, which will look much better than the samples presented in the store.

All you need are simple materials, a little patience and a flight of imagination, and we will tell you how to make a lampshade with your own hands.

Materials

You can create a masterpiece from everything you have at hand: fabric, paper, thread, twine, wire, plastic bottle, beads or beads.

In general, absolutely everything is suitable, even what you usually throw in the trash bag.

Don't believe me? Just look at the photo of the lampshade.

Frame

If you have a frame from an old lampshade, then that's just great.

However, don’t be upset if you don’t find one, because you can create a frame yourself from ordinary wire.

Copper, aluminum, steel - anything that you can independently combine into a single structure will do.

The metal frame of a classic lampshade consists of three rings and six jumpers between them. The small ring is a holder, which is connected by three jumpers to a ring of a larger diameter.

The same, in turn, is connected by jumpers to the last ring. The following photos will help you understand the design.

Made from fabric

When you have a frame for a lampshade, the easiest way to create your masterpiece is to wrap the base in fabric. For this you will need:

paper (newspaper);
scissors;
textile;
chalk or pencil;
threads

Wrap the frame with newspaper in such a way as to form a pattern out of it. Then transfer the resulting shape onto the fabric using chalk, adding 1 cm to the seam on each side.

Make a pattern, cut off the edges and sew the sides, forming a cover for the base of the future lampshade. We bend the upper and lower edges of the “cover” in such a way as to close the frame rings and secure them with a seam.

Pay attention!

Voila, your lampshade for the floor lamp is almost ready. All that remains is to add a few highlights to your taste, making it unique.

From threads

How to make a lampshade when there is no frame? It couldn't be simpler.

Take balloon IR without drawings, glue, thread, marker and start creating.

First you need to inflate the balloon and mark on it the upper and lower boundaries of your future masterpiece. Then take the threads and wrap them around the ball, trying not to protrude beyond the marked contours.

Apply glue diluted with water 1:1 to each layer of thread. When the density of the wound thread satisfies you, fix the cut edge and hang the ball to dry. After 3-4 hours the threads will dry. Then pierce the ball and carefully detach it from the walls of the finished lampshade.

Leaves and flower petals woven between layers of threads can add additional charm to a thread lampshade.
Pay attention!

A ball decorated with sparkling drops of beads also looks original. In general, watch and be inspired.

From paper

Ordinary sheets of office paper, glossy magazines, a cheap newspaper, an unnecessary book or an ordinary notebook, paper towel or a napkin - these are all future lampshades.

It doesn’t matter whether there is a frame or not, the main thing is that you have scissors, glue and paper. A thousand and one versions of such lampshades can be described with the words “cut and stick”.

The main thing is not to forget a few simple rules:

It is safest to use a paper lampshade together with economy light bulbs, which heat up significantly less than incandescent bulbs;
the diameter of the lampshade should be large so that the paper does not heat up excessively;
for a light room you can make a lampshade from thick paper, but for a dark room you need a thin one that transmits light well;
be careful with color. For example, red or yellow paper will add warmth to the room, green and blue will add coldness.

Well, that's all. Charge yourself with new ideas, arm yourself with the means at hand and move forward to easy changes that will bring warmth and comfort to your home.

Pay attention!

DIY lampshade photo

An old or faceless floor lamp can ruin the entire impression of the interior. To change the appearance of a lamp, you don’t have to go to the store in search of a better replacement. You can make a lampshade for a floor lamp with your own hands. We will tell you how in our article, and at the same time we will give ten original ideas homemade lampshades.

Original ideas for floor lamps made from scrap materials

You can make a lampshade for a floor lamp with your own hands from fabrics, as well as any available materials. There is no need to rack your brains and come up with a new idea - this has already been done before you. We have collected ten original lampshades, simple in design, but stylish and beautiful, which can become a designer “highlight” of your interior.

Everything ingenious is simple. When creating this lampshade, the effect of shadows was used. A stencil cut from dark paper is mounted on a light lampshade, which you can make from cotton, linen or silk fabric.

An original solution for a round lampshade made of thin paper or plastic tubes. By the way, the shape can be either cylindrical or cone-shaped.

Ordinary satin ribbons intertwined in checkerboard pattern, and flirty bows made from them can give the lamp a surprisingly elegant look.

This model combines several techniques: applique, embroidery and quilling. A little complicated, but so beautiful!

Do you have a napkin knitted by your grandmother lying in your closet unnecessarily? Find a use for it.

Plastic spoons will also work. It will turn out funny and exclusive.

Is your old school globe sitting idle? Half of the “globe” may well become a lampshade.

Used photographic film is an excellent material for floor lamps. Moderately plastic, it sticks well, forming a cylinder, and the light, refracting through the frames, casts fancy patterns on the walls.

Can you guess what this masterpiece of modernism is made of? We will tell you: from ordinary tetrapacks folded in a special way and cut into pieces.

Disposable paper plates can also be an excellent material in the hands of a craftsman. Watch the video:

Tools and materials

One of the most simple ways do DIY lampshade- is to make it from felt. This fabric is not classified as expensive, and therefore the finished product will end up being quite inexpensive. However, keep in mind that it is permissible to use felt only when the lamp contains energy-saving and led lamps. Conventional incandescent lamps become very hot when the floor lamp is turned on, and the material can ignite.

One more nuance: today our stores sell felt of various colors and densities. The denser and darker the fabric, the less light it will transmit. These floor lamps are best used in the bedroom, where soft, intimate lighting is appropriate.

Don’t forget about the color shades of the fabric, because they determine how warm or cold the lighting in the room will be. Coral, orange and yellow lampshades will add coziness and warmth to the interior, while blue, green and purple lampshades will add coolness and freshness.

The frame of the lamp also influences the choice of fabric. If it is unattractive and needs to be hidden as much as possible, choose thick felt. In other cases, a lighter fabric will do.

To make a lampshade for a floor lamp with your own hands, you will need:

felt. To find out the dimensions of a piece of material (we have a floor lamp in the form of a truncated cone), put a mark on the upper, smaller rim of the frame - it will become a “reference point”. Attach the frame to the paper in this place and, while rolling, draw with a pencil lines marking the passage of its upper and lower rims. Add 10 cm to the height of the frame - and you will get a “pattern” for the future lampshade, according to the dimensions of which the material should be measured;

quick-setting adhesive capable of gluing fabric and metal;

paper. We will cut out stencils from it, so you can even use old student notebooks;

scissors;

simple pencil.

We will assume that you have an old floor lamp frame. But if you don’t have one, it’s easy to make a base from metal wire.

Instructions for making a floor lamp

When measuring the frame, you have already made a pattern on paper. Place it on the felt, draw outlines with a pencil and cut out. Find drawings of butterflies on the Internet, redraw them or print them (it is enough to transfer only the outlines). Apply the resulting stencils to the fabric and use a pencil to mark the contours.

It's better to use stencils different sizes and place them randomly: along the top, center and edge of the lampshade.

Cut out the butterflies, but do not cut all the way through. Lift the wings slightly by pressing them with your fingers.

Apply glue to the rim.

And glue the blank to it.

Finally, glue the joint of the lampshade.

Attach the lampshade to the lamp.

Take it for yourself and tell your friends!

Option #1: paper

The easiest way is to make an original lampshade from paper. This decorative element can have any shape. It will harmoniously fit into almost any interior - the kitchen, living room, children's room. It is worth remembering that the service life of a paper lampshade depends on the quality of the paper. It should not be too thin, but at the same time light transmitting.

The easiest way is to consider how to make a lampshade with your own hands from the wallpaper left over from the renovation. Let's look at how to make a product in the form of an accordion. The work process does not take much time and does not require any special skills, abilities or schemes. You can make a lampshade for a floor lamp with your own hands from wallpaper, for table lamp or sconce:

First you need to prepare the material - a piece of wallpaper 1.5 m long and approximately 30 cm wide.
Mark the ribs with a pencil or pen.
Carefully form an accordion. The width of each rib should not exceed 3 cm.
Using a hole punch, make holes in the accordion.
Thread a decorative cord through the holes and glue the lampshade along the side seam.

Even a child can make such a product on his own.

While working, you can use rice paper instead of wallpaper. With its help you can update an old lampshade. Drawn with this paper, it will look stylish and modern. You can decorate the product using decorative elements such as special stamps, stickers, etc.

DIY paper lampshades will decorate any interior style. The main thing is to choose the right one color scheme and shape.

Option #2: rope

A DIY rope lampshade will look original. It can be used to decorate any lamp: sconce, floor lamp and others.

First you need to prepare necessary tools and materials:

20 meters of rope;
1 inflatable ball for the base;
PVA glue;
white paint (preferably in a can);
sticky tape;
gloves (regular household or medical);
device for weaving (special board or perfume box).

It’s quite easy to make such a lampshade with your own hands:

Using a weaving board, make a decorative ribbon out of rope. Its lines can be smooth or curved - as your imagination tells you.
Now you need to cover the air-filled ball with tape.
Taking the top of the ball as a starting point, lay the rope in smooth turns. At the same time, lubricate it with glue.
Remove the shade from the lamp. Paint it in white. Place the finished lampshade on top.
Cover the ball completely and coat it with glue again.
Use a needle to pierce the ball and remove it out. This will leave a shape woven from rope.

A lampshade made from twine, twine or rope is suitable for a table lamp, sconce or floor lamp. It is recommended to use an LED lamp under it, which will not heat up such a lamp too much.

Option number 3: threads

Another option is a DIY thread lampshade. Self-made chandeliers made from threads look very original. They attract attention and fit perfectly into any interior.

You will need:

balloon;
cotton threads of one or more colors;
250 ml PVA glue;
suspension cord;
energy saving lamp;
scissors;
large needle;
oilcloth or plastic the size of an A3 sheet;
petrolatum;
brush;
cotton pad and stick.

The process of making a lampshade for a table lamp, sconce, chandelier or floor lamp from threads with your own hands consists of several stages:

Inflate the balloon. It is desirable that its size be from 25 cm.
Lubricate its surface with Vaseline.
Cover the working surface with paper or oilcloth.
Punch a hole closer to the bottom of the glue tube.
Wrap the ball with threads in any order.
Lubricate the threads with glue. Leave to dry completely overnight.
By using cotton swab separate the ball, deflate and take it out.
Make a hole in the top of the finished product for the lamp and socket.
Insert the lamp inside. Attach the cartridge holder to the hole.

Now just hang the finished lampshade in the place intended for it.

Option number 4: lace

You can try making your own lace lampshade. From this material you can make a lampshade for an old table lamp with your own hands, for a sconce or a floor lamp.

Work begins with preparing the things necessary for work. This is the lace itself, PVA glue with a brush, a balloon and electrical elements for a lamp.

Stages of work:

The first stage is preparing the lace. You need to cut out several circles of different sizes.
Inflate the balloon. Lubricate its surface with glue.
Attach lace circles to the ball. This needs to be done overlapping.
Leave the product until completely dry. This will take about a day.
Burst the ball and pull it out.
Secure the socket, lamp and wires. It is recommended to use low-power lamps that will not heat the lace.

Option number 5: macrame

Fans of original decorative elements will undoubtedly pay attention to the macrame lampshade.

To make macrame lampshades with your own hands, you need to prepare:

172 m of 3 mm thick cord;
metal tubes and rings for the frame;
8 rings with a diameter of 7.5 cm;
1 ring with a diameter of 17 cm;
1 ring with a diameter of 36 cm.

How to make a frame for a lampshade with your own hands? We connect two rings (17 and 36 cm in diameter) and 8 metal tubes 27 cm long.

The workflow for making the lampshade itself looks something like this:

You need to cut 40 threads of 3.5 m each from the cord. Secure them to the top ring.
Using macrame patterns, weave an openwork mesh.
Insert 8 rings along the bottom edge, braiding them with thread.
Also braid all the vertical tubes of the frame.
Decorate the bottom edge with decorative elements.

Before making lampshades with your own hands, you can watch master classes. They will help you master the basic elements of macrame weaving and avoid mistakes in the work process.

Option number 6: fabric

A fabric lampshade will also look great. Using fabric you can update or restore an old product. It is enough just to cover it with prepared material and decorate it with any suitable decorative elements. A fabric lampshade with a cardboard base is suitable for a table lamp, sconce, infrared lamp, night light and even a chandelier.

In order for the product to turn out neat, it must be sheathed on the sewing machine. In addition to this, you need to prepare:

iron;
pencil;
ruler;
textile;
pins;
threads matching the color;
thick paper (thin cardboard or Whatman paper);
universal glue.

The workflow consists of several stages:

Make a template of the desired shape from paper. It is important that it fits the frame.
Connect the template to the fabric using pins. Trace it with a pencil. Draw another line 2 cm from the template line.
Fold the seam allowances inward, gradually removing the pins. Mark the fold line with them.
Remove the template.
Sew the fabric on a machine.
Iron the fabric well.
Place the workpiece in a well-ventilated area and coat it with glue. Let it dry a little.
Glue the fabric to the frame. All seams and cuts must be hidden.
Let the lampshade dry. After a day it can be used.

A lampshade made of fabric, decorated, for example, with flowers, buttons, bows, will look good. Instead of regular fabric, you can use organza.

Option number 7: wood

Separately, it is worth mentioning the lampshade for the steam room, sauna or bathhouse with your own hands, because here high humidity, and the glue may no longer hold the shape of the product. For making your own from scrap materials, wooden materials are the most popular.

To make a wooden lampshade for a steam room with your own hands, you need to take:

paper;
pencil;
wood;
sandpaper for sanding;
self-tapping screws

Using this set of tools and materials you can make a corner lampshade:

Draw a template for the lower part of the frame on paper. It should be shaped like a trapezoid. It is important that its sides match the walls of the bathhouse.
Using a pencil, transfer the design onto the prepared wood. Cut.
Sand with sandpaper.
Cut 3 strips with a width of 1 cm and a thickness of 0.5 cm. The height should be equal to the height of the lamp.
These strips will connect the top and bottom part frame. They need to be nailed on the sides and in the center.
After measuring the distance from the center to the edges, cut out several more planks of the same size.
Screw the strips with self-tapping screws inside lamp They can be fixed in any position.

As you can see, there are many options for making lampshades with your own hands. In addition to those listed, there are also wire products, knitted products, beaded lampshades and many others. In the process of work, almost any material that is at hand is used. If necessary, you can make a new product, or you can update the old one (do restoration). The work almost always requires a diagram or template. It is important that the workpiece matches them exactly. Only in this case will the finished product become a real decoration of your home or apartment.

Decorating a lampshade will help create a unique atmosphere of comfort in your home. In addition, this will help give old things new life. There is no need to throw away outdated lamps and fixtures, but use a little imagination to create a completely new one designer item. The decor of the lamp can be made from available materials, creating a lamp that will harmoniously complement the interior of the room.

Decoration materials

In order for a hand-made lamp to look original, you can use a wide variety of materials and devices to decorate it. Basic materials for work:

glue (PVA, silicate or glue gun);
twine, wire, twine;
beads, rhinestones, seed beads;
scissors;
pliers;
thick cardboard, sheets of white paper;
lampshade frame;
chamber for light bulb and wire.

This is not a complete list of materials that are used to create a lampshade. You can use any available tools and materials in your work.

The simplest base option for a lampshade is the frame from an old lamp. You can use metal frames from old lamps, which are subsequently decorated at the choice of the artist. Can also be used as a base glass jars, plastic container. The frame of the product can be made of wicker or wooden panels.

A light bulb socket and wire can be purchased at the market or you can use leftovers from an old lamp.

From papier-mâché

An interesting solution for interior design is a lampshade made of papier-mâché. For decoration you will need white paper, old newspapers (can be replaced with thin sheets of paper), PVA glue, a balloon, and water. Before starting work, the ball is inflated to the size that the lamp will then be. The newspaper should be cut into long strips, which should be left in glue or paste for a short time. The surface of the ball must be wetted with water and laid out the first layer of newspaper. One of the parts of the ball is not sealed, since light will emanate from it in the future.

An unusual solution: if you do not cover the bottom of the ball with a layer of newspaper, the light will be directed towards the floor. You can also leave the side of the ball free, in which case the light will emanate to the side.

To create an unusual papier-mâché lamp, you will need to apply 5-6 layers of newspaper. Be sure to ensure that the previous one is completely dry before applying the next layer. After completing the layout with newspaper, the lampshade can be covered with white paper and liquid wallpaper can be applied. After decorating the lamp, you need to burst the ball and cover the lampshade with paper on the inside. Make a hole on top of the product for the chamber.

Made from cardboard and paper

Another decorative option is a paper lamp. To do this, you need thin cardboard in white or other colors. The length of the cardboard sheet depends on the required diameter of the finished product. The selected outline (butterflies, hearts, stars, etc.) is applied to the cardboard. With the help stationery knife the selected designs are cut out from the canvas. The cardboard is glued along the edges and attached to the frame of the future lamp. Along the edge of the lampshade, you can attach ribbons or a fishing line decorated with beads, on which to hang symbols cut out of cardboard. This product looks very original on the ceiling of a nursery or bedroom.

You can string colored beads onto ribbons, which will alternate with paper figures.

After turning on a lamp with such a frame, funny figures will appear on the walls of the room.
Using fabric to decorate a lamp

Fabric lampshades are easy to make and hold up well to cleaning. As the most simple option lampshade, you can take a piece of fabric that looks harmonious with the interior of the room and sew its edge. A cord is inserted into the upper part and that’s it – the lampshade is ready. This product is attached to metal frame and is also easy to remove.

A more complex version of a fabric lampshade can be decorated with ruffles and weaved ribbons. Lampshades covered with fabric ribbons or embroidered with beads and sequins look quite original.

To decorate the living room, you can make a lampshade decorated with fringed ribbons. Ready-made ribbons are sold in sewing stores. A hot glue gun is used to attach the fringe to the frame. Adhesive thin layer applied to the lamp frame, to which the braid is subsequently attached.

If there is a need to decorate a finished lampshade to make it match the interior, you can cut out various figures from fabric, which are attached to the lampshade using a glue gun.

From improvised objects

In any home you can find a lot of items that can be used to decorate a lamp. And if you look in the garage, you can create a whole studio of designer chandeliers. The most important thing is to show imagination and take an unconventional approach to the choice of materials for decoration.

For the purpose fire safety you need to use items that are resistant to impact high temperatures or screw in low-power light bulbs, before starting work, the surface of the object must be cleaned of dust and dirt and degreased.

When choosing a lampshade style, you should take into account the interior of the room and its purpose. For example, a lampshade made from plastic spoons will look strange in a living room that is decorated in an ornate style. glamorous style. At the same time, a lampshade decorated with rhinestones and stones will be completely out of place in the kitchen or in a summer gazebo.

From plastic spoons

This lamp is ideal for decorating a kitchen. It is very easy to make, and the materials for the lamp cost pennies. So, for work you will need the following materials:

Set of plastic tablespoons. In total, you will need 50-100 pieces of devices, depending on the desired size of the lamp.
Gun glue.
Set of acrylic paints and brushes.
Frame for lampshade. For suitable for work a finished metal frame from an old tabletop floor lamp.
Scissors.

First, you need to cut off the holder from all the spoons. For each product you need to leave 0.5 cm of boat for fastening. Next, the parts of the spoon are attached to the frame in random order. They can overlap each other, imitating fish scales, or scattered, reminiscent of rose petals. Spoon legs can also be used for decoration. After covering the entire surface of the frame, the surface of the spoon is coated acrylic paint– plain or multi-colored. Using this decorative technique, you can create a lamp in the shape of a pineapple, flower, goldfish and others. A lampshade made of plastic spoons is suitable not only for a ceiling lamp, but also for decorating a bedside lamp in a nursery.

From plastic or glass containers

Water bottles often accumulate around the household, which can be used to decorate lamps. Before starting work, the bottle must be thoroughly washed and dried. Further actions are the freedom of the master’s imagination.

For example, by cutting off the neck of a bottle you can create an excellent holder for a light bulb socket. Several of these accessories, which are glued together, form an unusual chandelier. Bottles can be made of multi-colored plastic or coated with transparent colored varnish. So, multi-colored rays of light will sparkle in the room.

You can also use glass pickle jars to create a lampshade. Suspended on at different levels lamps made from cans will be interesting design solution in kitchen design. Also, when arranging a kitchen, you can use saucers, cups, and fragments from broken dishes to decorate the lampshade.

From twine

Such lamps can often be found as lanterns on the streets or on terraces. Making such a lamp at home is very simple - twine and glue are used to create it.

Before starting work, as in the case of a papier-mâché lampshade, you need to inflate a balloon of the required size. It is this that will serve as the mold for the future product. The twine needs to be soaked in paste and wound around the ball in a random order. The free edges of the twine are tied, and the knot must be placed in the upper part of the ball, where the chamber will then be located. The product will take approximately 2-3 days to dry. Then the ball needs to burst and you can attach the chamber and the light bulb. Finished product can be decorated with large beads and dried flowers. To decorate a gazebo, you can use several of these lampshades of different sizes.

Thus, there are many options for creating an original lampshade. In your work you can use not only special equipment, but also improvised objects. Making and decorating a lampshade will not only decorate your home, but also have a great time.

Cozy evenings with a book in your favorite chair, soulful tea parties with family in the kitchen, romantic dates with loved ones... And above all this is a familiar, familiar, traditional lampshade for table lamps, a wall lamp or a floor lamp standing on the floor.

Beautiful lampshades made by yourself become noticeable and irreplaceable interior items. They bring a touch of romance into everyday life and fill homely atmosphere warmth and beauty.

The material for making a lampshade can be fabric, paper, or beads. By showing imagination and patience, you can transform an old lamp shade with your own hands beyond recognition. Such an exclusive element will make the interior individual and truly homely.

Master class on making a lampshade with your own hands

A popular material from which to make a lampshade with your own hands is fabric. Linen, silk, denim, organza - any option.

Will do whole piece or strips of material. You can simply cover the frame with printed fabric and make it plain with embossed flowers from the same material.

It is important to understand in advance where exactly your lampshade will “live”. A romantic environment requires an appropriate “companion,” while strict minimalism requires another.

Expert advice: As a basis for the lamp, you can take the frame from an old lamp. Making it yourself from stiff wire is also easy. And it’s worth choosing energy-saving lamps so that the fabric doesn’t catch fire.

How to do beautiful lampshade with your own hands?

We take a finished frame, for example, with a ring diameter of 20 centimeters on top, thirty-six centimeters on the bottom, and twenty-eight centimeters in height;
select the fabric and cut it into strips, each four to five centimeters wide; only about twenty-five stripes;
the edges of the tapes must be smooth;
iron them well with an iron;
wrap one edge of the ribbon around the top ring and sew it on by hand;
now we take it down and wrap the lower ring, and again the upper one;
when the strip ends, we secure its edge by sewing it to the fabric;
take a new tape and continue;
when the entire frame is wrapped, we sew “belts” for the edges;
to do this, we take two strips of material of a different shade and cut out two strips from it, each length is thirteen centimeters, width is ten;
iron the ribbons, bending the longitudinal edges 2.5 centimeters to the wrong side;
then bend the strip in half;
glue double-sided tape onto the frame hoops;
We glue a strip of fabric onto it, slightly cutting its edge along the way so that the material lies as evenly as possible;
bend the second edge of the tape to inner surface cases and also glue them with tape;
In this way we decorate the top and bottom of the frame with “belts”.

You can make a border from crocheted ribbon or ruffle.

DIY lampshade made of plastic and fabric

The second homemade lampshade is also made of fabric. You can make it based on an old lampshade. Or you can transform a typical product bought in a store like this:

DIY lampshade. Photo

- the first step is to measure the circumference of the upper and lower rings, as well as the height of the frame;
- add two centimeters from each edge to the resulting dimensions so that the seams can be made;

DIY lampshade. Master class

- take a sheet of thin plastic and cut out a rectangle or trapezoid from it - the base on which the homemade lampshade will rest;

How to make a lampshade with your own hands. Step by step photo

— cut the fabric to size, use masking tape to glue it to the table;

- glue the material onto the plastic;

Master class - DIY lampshade. Photo

— we bend the resulting part around the frame of the lampshade and fasten its edge with clamps;

- mark on the fabric the place where the seam will go;

- remove the paper clips and glue along the marked line with glue; press the joint with something heavy and let it dry;

Homemade lampshade for a lamp. Photo

- then we turn the lampshade over with our own hands and glue it inside in the same way;

— now you can glue the connection between the body and the rings;

— when everything is well fixed, remove the clamps;

- decorate the bottom and top of the lampshade using paper tape; glue it so that one edge extends beyond the ring;

— we bend the free edge into the body and glue it;

— fold a strip of fabric of a different color in length to the height of the lampshade and five centimeters wide, fold the edges inward, and iron it;

— apply glue to the inner surface of the tape and glue it together;

DIY lampshade. Step by step photo

- glue the strip to the seam on the lampshade;
- cut out two strips of paper of the same width as the finished strip for the seam; then glue it to the top and bottom edges of the lampshade; fix with clamps; Glue a strip of fabric on top of the paper.
The homemade lampshade is ready.

Ideas for making a lampshade with your own hands with photos

This “floral” lampshade will perfectly complement a romantic interior.

A little imagination - and the bouquet with variegated roses is ready.

Delicate tones create a romantic mood.

A frill of white roses is the perfect complement to a strict, simple design.

This wonderful lampshade brings back memories of grandma's napkins.

These origami-style lamps will look good in a minimalist interior.

Another representative of the ancient Japanese art creating masterpieces from paper.

Light green-blue strokes will fit perfectly into the design of green tones.