How to organize jewelry storage: a selection of the most creative options. Ideas for making stands for jewelry with your own hands How to make a stand for earrings from cardboard

This organizer is convenient for storing beads, pendants, and chains.

You will need:

4 cork boards;

Stencils, paint and sponge or brush;

Pins, nails or hooks;

Wall mounting.

Sequence of work:

1. Using stencils and paint, apply the design to the boards.

2. Wait for the paint to dry and stick pins, nails or screw hooks into the boards. All that remains is to fix the organizers on the wall and hang the decorations.

Photo and source: katelynbrooke.com

2. Organizer box for watches and bracelets

A good way to organize bracelets and watches and store them away from light and dust.

You will need:

Several rolls of paper towels;

Beautiful napkins (for example, for decoupage), wrapping paper or wallpaper scraps;

Scissors;

A box with a lid of a suitable size.

Sequence of work:

1. Clean the bushings from any remaining towels, lubricate them with glue and cover them with napkins or paper, wrapping the ends of the paper inside the bushings.

2. Place the resulting holders in a box. Ready!

Photo and source: onceuponherdream.blogspot.com

3. Door handle organizer

A very original and convenient model - the holders act as door handles of different colors!

You will need:

Board or plywood;

Fabric for tight fitting;

Rope for fastening the fabric (you can also glue the fabric or use a furniture stapler);

A variety of door handles (best to go to furniture store and buy 1-2 pieces different sizes and forms);

Sequence of work:

1. Distribute the pens on the board. Mark their mounting locations and drill holes.

2. Cover the board with fabric, securing it in a way convenient for you. Then secure the handles to the board. Ready!

Photo and source: lizmariegalvanblog.blogspot.com

4. Organizer from trays for cutlery

These trays are usually placed in a kitchen drawer to store cutlery. However, with their help you can make convenient organizer shelves for storing jewelry and small items.

You will need:

2 or 3 trays for devices (in in this case taken wooden);

Spray paint;

Decoration paper and glue;

Adhesive hooks;

Wall mounts.

Sequence of work:

1. Paint the trays with spray paint. Some parts of future organizers can be covered with patterned paper.

2. Wait for the glue and paint to dry and attach the hooks. All that remains is to attach the organizers to the wall.

Photo and source: tatertotsandjello.com

5. “Jewelry Tree”

Not just a stand for jewelry, but an art object! And it's done in a matter of minutes.

You will need:

Several dry branches;

Optional paint.

Sequence of work:

1. Remove bark from the branches and (if desired) paint.

2. When the paint is dry, place the branches in a vase and hang the decorations.

Photo and source: mysocalledcraftylife.com

6. Lace organizer

Copper accessories and specially distressed lace make this organizer look like something found in grandma's chest or found at a flea market. It is convenient to store everything that has hooks on it: earrings, brooches, badges.

You will need:

Strip of wide cotton lace;

A pair of copper-look metal holders;

A piece of cardboard;

A couple of tea bags for coloring lace.

Sequence of work:

1. If you want to age white lace, dip it in tea infusion. Then rinse and dry.

2. Cut a piece of cardboard with a width equal to the width of the holders and glue it to the lace, as shown in the photo.

3. Tie the lace into a ring, thread it through the holder and secure the holder to the strip of lace.

4. Use the second holder to decorate the bottom edge of the organizer. All you have to do is hang it on the wall - and you're done.

Photo and source: forthemakers.com

7. Ombre hanger organizer

It turns out at the same time a hanger for beads and chains, and a shelf for small items, and original item interior decor.

You will need:

Bar with rectangular cross-section for the base of the shelf;

A stick for hooks and a jigsaw to cut them;

Sandpaper;

Durable glue;

Paint (shelf color, hook color + white);

Brush or sponge + containers for mixing paints.

Sequence of work:

1. Prepare pieces of stick for hooks: saw them off, sand the edges.

Today I want to tell you how to make a jewelry stand with your own hands. For the time being, beads, bracelets and earrings are placed in the box. But at one point you realize that you are tired of untangling chains, and among the jewelry you are tired of looking for your favorite ring or stud earrings. That is why it makes sense to make a stand for jewelry.

I have specially selected a few for you original options, among which you can choose the one you like.

DIY jewelry stands

Idea 1

We buy a regular towel bar and hang hooks on it in the shape of the letter S, where we attach pendants, necklaces and chains.

Idea 2

You can buy a ladder for parrots at any pet store. We cut down one of the vertical crossbars from it and we get something like a “comb”. We attach it to the wall or to the cabinet door with inside- and the stand is ready.

Idea 3

Let's take it old box, paint at your discretion, drive in nails. This makes an excellent and original shelf for jewelry. If the hanging box does not fit into the interior, it can be decorated with a pattern. And so as not to display your earrings and necklaces for everyone to see, you can make a decorative curtain or doors.

Idea 4

Stands for jewelry in the form of paintings look original. You can buy the most ordinary photo frame. If you wish, you can cover it with acrylic paint or decorate it in some other way. Inside the frame we place cardboard on which thick lace, plastic mesh or several rows of wire are stretched.

Idea 5

We buy the cheapest grater and hang earrings on it. Original, right?

Idea 6

We take a metal base rod and string several bottoms on it from plastic bottles. It is better to make holes in the plastic with a hot awl. And to make several levels, we fix each bottom from below. To do this, simply wrap several layers of adhesive tape around a metal rod.

Idea 7

Glue wine bottle caps onto the photo frame. Their placement depends on your imagination. But it is inconvenient to hang jewelry on corks, so it is better to press small nails into the cork.

And of course, photos of do-it-yourself jewelry stands. Some of them are described above, but some I’m just posting for your information.

A jewelry stand is essential for any fashionista who has large number earrings and beads, and who often changes them depending on her outfit and mood.

DIY jewelry stand

There is nothing easier than reclassifying coat hooks as jewelry hooks. You can use ordinary store-bought ones made of wood, plastic or metal, without making any special efforts to decorate, because beads and bracelets will successfully complete this task.

Clothes hanger.

An ordinary hanger can, indeed, perform the function of storing jewelry with great success: earrings should be placed on additional hooks under the hangers, bracelets should be placed on a metal rod, and beads should be tied in a loop on the crossbar. It looks most aesthetically pleasing when hung with jewelry. If desired, it can be painted in some kind neutral color or decorate using decoupage technique.

Grater.

The graters with their small holes along the entire perimeter seemed to be created just for this purpose - so that girls could insert the hooks and clasps of their earrings into them.

In fact, the grater is a rather old invention, which during its existence has rightfully deserved to be main theme for entire museums and the most interesting private collections. The first grater was invented in the mid-16th century by the Frenchman Francois Bouillet specifically to grind dried cheese, and then began to be used for all other products.

Thanks to four edges (or even more in modern models), you can easily place a huge number of decorations on the grater and, by turning the pyramid, you can see and select what you need for your current situation.

Oddly enough, It’s best to use a Soviet grandmother’s grater for decoration, even if it’s bent or rusty in places. By spray painting it with any color that matches the interior, you can get not only an excellent holder for jewelry, but also a really interesting art object.

Cups and saucers.

An elegant tea set of coffee cups and saucers, one of those that everyone has received at least once as a gift and for some reason hardly ever uses, will be a wonderful way to store jewelry. Filled with chains and rings, as well as earrings and beads, it can be placed right next to the mirror, or you can put it in a chest of drawers or a dressing table drawer, and open it every morning before going out, like a real treasury.

Desk drawers.

Among other things, they are notable for the fact that it is easy to hook earrings onto a wooden base, as well as attach push pins or nail small nails and hang beads and chains on them. And the bracelets fit perfectly on any stable cylinder, such as an empty soda bottle or toilet paper roll.

Except wooden box You can use an old Soviet first aid kit in exactly the same way, if you remove the door - don’t hide such beauty!

Holder for rings and bracelets made of plaster

The needlewomen certainly borrowed the idea of making a stand for jewelry from plaster from shops and showrooms, where mannequins are displayed at every turn, demonstrating not only clothes, but also all kinds of accessories in the best possible light.

Mannequin literally means “little man” and is considered one of the most ancient inventions of mankind, because already in the tomb of Tutankhamun a male torso with a set of clothes was discovered. Papier-mâché mannequins were only used for display and tailoring in the 18th century, and wax mannequins were used in shops in 19th-century Paris. This was extremely inconvenient and impractical, and only the advent of plastic finally solved this problem.

In order to make such a stand for jewelry, you will need:

gypsum - 1 kg (gypsum in dry form is sold in construction stores and art salons);
thick rubber glove of the smallest size;
a smooth wooden board and a simple pencil;
sandpaper;
construction stapler;
drill and jigsaw or hand saw.

How to make a plaster jewelry holder:

It is necessary to measure the diameter of the wrist of the rubber glove and draw a corresponding circle on wooden surface, and then cut it out using tools. Next, clean the edges wooden board sandpaper and attach the glove to this hole with a staple gun, as shown in the photo below.

Next, you need to mix the plaster with water so as to obtain the consistency of sour cream, and carefully pour the resulting mixture into a glove attached to the board. It is important to ensure that the plaster fills the glove evenly without leaving any air bubbles. In this form, you need to let the plaster dry for two days.

After two days, the glove is carefully removed, and plaster arm ready for rings and bracelets.

A holder for rings and bracelets made of plaster in the shape of a hand can become a non-trivial decoration for an elegant interior and will successfully fulfill the task of beautiful and convenient device for storing jewelry.

Wood for decorations

Making a stand for jewelry in the shape of a branched fruit-bearing plant is a great idea, suggested by nature itself, especially since it is not so difficult to implement.

Trees for storing earrings can be made of several types:

Made from real tree branches.

This is the simplest and most obvious option, for which you just need to choose a suitable strong branch and a stand for it, or simply nail the branch to the wall and hang your jewelry on it.

Wire tree.

Twisted wire tree placed in decorative vase or framed, can look very unusual and conceptual. The main condition is to choose the right wire. It should curl well, keep its shape and not be brittle. Copper wire is best suited for these purposes.

Detailed master class: tree made of wire and papier-mâché for storing jewelry (video)

A tree made of wooden or cardboard modules.

A tree made of two modules can be openwork, as in the photo, or primitive in shape, as in the master class on its manufacture, which can be seen below. One way or another, large number the edges of such a tree contain excellent opportunities for beautiful and convenient placement costume jewelry

What is needed to make such a tree:

cardboard and scissors or fiberboard sheet, jigsaw and drill;
liquid nails;
dye.

Regardless of the material chosen for making wood for decorations, the procedure will be the same:

Using the template presented below, draw two identical trees on a sheet of cardboard or fiberboard, cut or saw the trees along the contour and make slits at the top and bottom, as shown on the template, as well as small round holes(holes) where they are shown in the figure.

The basis for a jewelry holder can be:

photo frames;
a picture frame or from an old mirror;
hoop.

The appearance of picture frames is associated with the designation of easel painting, when works fine arts they already wanted to observe it not only on the wall on which it appeared thanks to the efforts of ancient artists, but also to transport it from place to place, view it in a museum, or even have it in their own living room. This was in the 14th century and since then the frames have been in various designs and variations do not lose their relevance and functionality.

You can fill frames and frames with any material with a large number of holes, so you can easily attach earrings to it:

lace;
mosquito net;
tulle;
plastic or metal grill.

A frame filled with lace and all kinds of earrings will adequately decorate any room, attract the attention of guests and help forever forget about the problem of lost or forgotten jewelry in a huge jewelry chest.

Frame for jewelry with mosquito net (video master class)

There are several ways to beautifully arrange decorations in a prominent place so that you always know what is available, and at the same time transform the room:

hang hangers or hooks, a tree or a frame on the wall and fill them with jewelry;
make a free-standing object by transforming ordinary things, for example, grandma's grater, or gluing together a tree from cardboard modules.

Whatever you choose, a jewelry stand with jewelry, chains and bracelets beautifully hung on it will now become the center of attention in your apartment or a priceless gift for a girl whose passion is jewelry.

Every fashion-conscious woman has a wide variety of jewelry in her arsenal that allows her to make her look stylish and unique. But, unfortunately, this creates an eternal problem fair half humanity - there is no place to store all the rings, bracelets, necklaces, and beads. Therefore, the issue of acquiring a container for all women’s “treasures” is quite relevant. We invite you to make a jewelry stand with your own hands.

How to make a stand for jewelry from cardboard?

The simplest option that does not require serious efforts and expensive material - this is a stand for decorations made of cardboard in the form of a tree. You can use shoe boxes for this. household appliances– the main thing is that the cardboard is thick. In addition, you will find it useful:

hole punch;
scissors;
scotch;
acrylic paint;
pencil.

Insert earrings from your collection into the holes of the tree: isn't it a wonderful accessory?

How to make a jewelry stand from wooden frames?

We present to your attention a master class on making an original stand for jewelry with your own hands. To do this, you will need the help of your beloved man and:

3 wooden frames, one of which is wider than the other two;
4 brass window hinges small size;
segment metal mesh with small holes;
self-tapping screws;
hooks white;
white wood primer.

Stylish homemade stand ready for decorations!

Articles on topic:

If you have a favorite knife that you often take outdoors or on hikes, the problem arises, what to carry it with? Nothing better than a sheath has yet been invented, and we suggest you make a knife sheath with your own hands.	Needlewomen have no problems with where to put a bouquet of donated flowers, because they are even from simple glass jar can make beautiful and original vase. We offer you several ideas for decorating jars.

Every woman has a lot of jewelry in her arsenal that needs to be stored somewhere. In our article we propose 50 original ideas stands for accessories with photos.

As a rule, many people use a variety of boxes for storage. However, you must agree that the boxes are not very suitable for storing absolutely all the jewelry in them. Chains and bracelets get confused with each other. And in this confusion, sometimes it is impossible to quickly do what you need at the moment.

In general, such a stand is very easy to make with your own hands. In this case, it will differ not only in functionality and convenience, but also in originality, because it will be a truly exclusive item. You can always give such a stand to your girlfriends later. Surely they will be pleasantly surprised and delighted by such a gift.

So, the stand that we suggest you make has the appearance of a female silhouette, which can be hung on the wall, or can be placed on a chest of drawers.

DIY stand for jewelry and jewelry

A stand for jewelry and costume jewelry will look like an elegant and attractive bust. For making of this accessory You will need a silhouette template (it is best if it is a female silhouette in the style of the eighteenth or nineteenth century), a piece of wood or plywood, as well as sanding paper, paint of a suitable color for you, and tools for cutting along the contour. Then you can do it as carefully as possible, clamps for safe cutting wood, nails and bolts and a pencil. Let us note that in general painting the stand is not a necessary item, especially if you chose wood of a beautiful shade to make it. In this case, you can simply varnish it to protect it from damage.

How to make a jewelry stand with your own hands?

So, first, you should draw a template on paper that will look like an elegant female silhouette. As for the size, it can be absolutely anything. If desired, if you have a lot of jewelry, you can make a bust with dimensions close to the parameters real person. If you don't know how to draw or are not sure that you will get an attractive bust, try to find something suitable on the Internet, and then just print out the drawing.
Transfer the outline of the template onto the surface of plywood or wood, and then carefully cut out the resulting pattern. If necessary, paint the template desired color(preferably acrylic).
After the paint has dried, install special fasteners for the stand. There are two main options for installing them. You can install the stand on a chest of drawers or on a table in the form of a bust, and then the mounts should be installed horizontally. If you plan to place the stand on the wall, then the mounts are installed vertically.
You can also make small holes and insert studs into which you can hang your earring collection. Voila! Original stand, which will be your reliable assistant, is ready. Now you can hang your decorations and be sure that they will always be at hand at the right time.

Ideas for a stylish stand

Do you have an old grater lying around idle? Don't rush to get rid of it! This is a cool piece with holes that seems like it was made for true fashionistas.

They are convenient for storing earrings, pendants and chains. By turning the pyramid in the desired direction, you can immediately select the appropriate accessory. It's easy to update an old grater - you can paint it, wrap it with ribbons, and decorate it with bows.