There are no problems with the dismantling of the first two types of mechanisms. In principle, mounted ones do not even require dismantling, given the peculiarity of their design. It is enough just to open the temples with a key. To remove the invoices, you need to remove the screws on the body of the locking device and the striker installed on the box. But it is far from always possible to cope with dismantling, especially if you have never done this before. Below, we will elaborate on how to remove mortise lock .

Break - do not build, dismantle - do not install!

From the reading below, you will see that, in principle, removing the lock is not so difficult. The main thing is to remember the sequence of actions. Of the tools, you only need a Phillips or flat-head screwdriver, depending on what type of screws are used in attaching the lock.

So, how to remove a mortise lock. Open the door and remove the fixing screws from the bar installed on the end door leaf. Now gently pry the bar with a flat object, the same screwdriver or a strong knife. Do this carefully so as not to damage the door leaf.

It is far from always possible to remove the lock, since it all depends on the design of the mechanism. If the removal did not bring difficulties, only the holes for the lock and the keyhole should remain in the door leaf. In the case when it is not possible to dismantle the lock by simply prying off the bar, a larva is provided in its device, through which the mechanism is locked and unlocked.

In this case, you need to unscrew a special screw, which is also screwed into the end part and secures the larva. In order to remove the larva, just press on it. It doesn't matter which side - internal or external. Some models of locks require the key to be turned in the keyhole before dismantling the larva. Usually, all the way, towards the opening of the lock, when the bolt is completely hidden in doorway. There are other options in which you will have to select the correct key position. Slowly turn it and periodically press on the larva, which will allow you to find the desired position.

By the way, if you have a locking-locking lock with a rotary handle and a latch, then before removing it, you need to dismantle the handle. She puts on a through, tetrahedral axial pin passing through the entire castle. To fix the handle with inside door, a small screw is installed on it. Having unscrewed, remove the handle first from one side of the sash. Pull the second handle towards you to remove the pin from the lock.

Also, decorative overlays can interfere with the unhindered dismantling of the lock. Taking them off is no problem. They will be the last possible obstacle to removing the lock from the door leaf. Now you know, how to remove a mortise lock. During operation, be extremely careful not to lose the fixing screws, otherwise reverse mounting will be impossible or will bring a lot of difficulties.

If you once faced the fact that the lock on the entrance or interior door stopped obediently opening or jammed, then there is absolutely no reason to panic. In this situation, you just need to decide how to remove the lock from the door without damaging the canvas and the locking mechanism itself. Also, this publication will be useful to those who simply decided to change the locking device to a new one.

Types of locks and features of their dismantling

In a situation where the removal of the door lock is presented to you complex process, you need to study the instructions for installing the device. This will help clarify the details of dismantling and decide on independent work without the involvement of professional craftsmen. This way you save a lot family budget and expand your knowledge of the use of safety locking devices.

In order to understand the question of how to remove the lock from the door, you need to remember that all locking mechanisms differ in device, so they are removed and installed in different ways. According to the method of fastening, locks are:

• hinged;
• invoices;
• mortise.

Withdrawal door lock hinged and overhead type is not particularly difficult; a person who does not have deep knowledge in plumbing will cope with such work.

The situation is completely different with the locking mechanisms of the mortise type.

Dismantling Instructions

Removing the cylinder mortise lock

Now let's consider in more detail the question of how to remove a mortise-type door lock with a cylinder locking mechanism.

A characteristic feature of models with a cylinder (larva) is that in the event of a malfunction of the device, to a greater extent, it is possible to do only by replacing the core of the lock - the larva. This determines a very impressive service life of the product, subject to all operating rules.

How to remove the mortise lock cylinder? The process of replacing a part is not a difficult job. It will be handled by a person with minimal locksmith skills.

This will require a very small arsenal of tools:

1. screwdriver;
2. yardstick;
3. new larva.

The work is done in the following sequence:

1. Using a screwdriver, unscrew the screw that secures the core to the lock body.
2. In the open position of the door, turn the key in the lock until the cam of the larva disappears in a secret section of the cylinder.
3. Now the larva should be freely removed from the body of the lock by lightly pressing it with outside doors.

There are times when the larva does not work in the lock or the key is jammed in the well. In this situation, you can solve the problem with an electric drill and a metal drill with a diameter of 10mm. As a rule, the core of the lock is made of non-ferrous metal alloys, which are easily processed cutting tool. After drilling, the remnants of the larva are removed from the lock, and replacement is easy.

When buying a new larva, it is better to take an old product with you so as not to make a mistake with the linear dimensions when choosing a new part. The store will help you decide on the manufacturer of the cylinder model.

Learn more about how to withdraw interior lock and replace the larva, you can by watching the video.

Removing and replacing mortise lock handles

Over time, the handles of the locks are subject to wear, as they are under the action of a constant mechanical load. Handles with a large backlash can no longer suit the household, and the replacement of lock fittings, in particular, door handles, is becoming a hot topic.

This begs the question of how to remove the handle from the lock and replace or repair it without damaging the locking mechanism and the door leaf.

The process of removing the handle is simple, to do the job it will be enough just wrench and screwdrivers. It is performed as follows:

1. First, using a screwdriver, unscrew the screws that secure the lever on both sides of the door.
2. Then, with a key, we unscrew the lever itself and remove the turning mechanism with a spring from the handle.
3. We separate the spring from the rotary device to wipe the parts with a clean rag.
4. We unscrew the retaining ring and release the spring and the key type washer.
5. Next, unscrew the retaining ring with a screwdriver. This part of the lock holds the torsion spring and key washer together.
6. If the washer or spring is broken, they must be replaced.

The keyhole may also be the cause of the malfunction of the lock handle; it will also not be very difficult to eliminate this breakdown.

If you need to replace parts of the handle, it is better to choose a device that you are used to using. When repairing a door handle, parts of this design will be interchangeable, which is very convenient when revising the state of the mechanism and repairing it.

The handle is assembled in the reverse order. In the event that the replacement of the handle parts did not give a positive result, then right decision The lock mechanism will be completely replaced. This work is also simple, you just need to release the internal lock mechanism by unscrewing 2 screws on the end of the door leaf. The decorative strip must be pry off with a flat object and the locking device removed from the hole.

Locks with magnetic mechanism

The device of such a mechanism differs significantly from the usual designs of locking devices. The position of the door leaf in the closed state is carried out due to the attraction of the magnet-tongue to the metal striker.

As for how to remove the magnetic lock and replace it, there will be no big difficulties here either. According to the method of fastening to the door leaf magnetic locks divided into hinged and mortise. How to remove locks of these types, we already know. It is only necessary to de-energize or disconnect the device from the power source before removing it. If the door locking mechanism is equipped with a closer for closing the leaf, then you must first disconnect it as well.

The rest of the removal sequence is similar to mechanical devices, with the exception of minor nuances that can be taken into account by carefully studying the instructions for installing such locks.

Mankind has not yet invented eternal mechanisms, all parts of the units have a certain resource, and locking devices are no exception. The locks on our doors, unfortunately, also become unusable. Many factors affect their lifespan. It is worth remembering that the most important of them is the timely cleaning and lubrication of the mechanism parts, careful handling of locks when opening and closing doors.

Despite improvements in locking mechanisms, the use of innovative technologies and ultra-reliable raw materials, they still sometimes fail. In this case, they must be dismantled in order to install a serviceable device in place of the broken mechanism.

In this article, we will talk about how to remove door lock. Consider the process of dismantling locking devices of two types:

• mortise;
• overhead.

It makes no sense to talk about them, because to remove them you just need to unlock the mechanism, pull the shackle out of the groove and turn it in any direction.

Removing the mortise lock

To begin with, let's consider how to remove door lock mortise type, since it is considered that its dismantling is rather difficult. We will try to convince you otherwise. To remove the lock, you only need a screwdriver (flat or Phillips, depending on the type of fastening screws used).

So, to dismantle the lock, it is necessary to unscrew all the fixing screws located on the bar at the end of the door leaf. If a lock is installed without handles and a fixed larva, then in this case it is enough to pry off the bar at the end of the door and pull out the mechanism.

However, in most, a larva is provided - the secret part of the constipation, through which it is locked and unlocked. To remove the larva, you need to remove the screw, which is also installed in the end part of the bar. It is much longer than conventional mounting screws as it goes through the mechanism of the device.

After unscrewing the screw, press on the larva (on either side of the door leaf). Usually it comes out without any problems. In some models, it has a certain protection, which you can get rid of only by installing inside secret to a certain position. To do this, insert the key into the keyhole, slowly turn it until you find the position you are interested in.

Next, consider how to remove door lock mortise type, if it has handles. After all, handles can interfere with the dismantling of the lock, of course, if they are provided for by constipation designs. Handles are put on a through pin, usually square shape, and are attached to it with a special locking screw. Unscrew it and remove the handles, pull the pin out of the lock.

Another reason why the lock cannot be removed from the door may be decorative lining, the screws of which are screwed through the door leaf directly into the lock body. If they are on the lock, unscrew the screws and remove them. This was the last possible obstacle on the way to the complete dismantling of the lock from the door leaf. Now you can pull the device out of the end of the door.

Removing the padlock

In this part of the article, we will talk about how to remove door lock overhead type. It takes even less time and effort to dismantle it than to remove a mortise device. All overhead models are screwed directly to the door leaf using conventional screws or self-tapping screws. To dismantle the device, you only need to unscrew the fasteners. After that, proceed to remove the plate that closes the keyhole. That's all! The lock has been removed.

Be careful!

As mentioned at the beginning of the material, the main reason for dismantling locking device is its breakdown. Therefore, when purchasing a new lock, pay attention to several main factors:

• burglar resistance class;
• durability;
• operational characteristics;
• the name of the brand that released the model you liked.

This will help you choose a really high-quality locking mechanism that will function properly for many years, saving you from having to look for information again, how to remove door lock.

We wish you good luck in dismantling the old constipation and choosing a new, high-quality model!

How to remove the lock from the door?

The door lock has to be removed not only if it is replaced due to a breakdown. Like any other mechanism, the lock needs periodic cleaning and lubrication. It's not about complex structures modern doors which only a specialist can deal with. Knowing how to remove the lock from the door, you can solve this problem yourself.

How to remove the lock from the door

How to replace the lock on the door depends on what type it belongs to.

Rim lock

Dismantling the overhead lock is not difficult. Rim locks are usually installed on wooden doors from the inside with screws or self-tapping screws. They are less attractive, but allow you to maintain the strength of the structure. To remove the padlock from the door, just unscrew the fasteners.

Mortise lock

This type of lock is mounted inside the door leaf in a special hole. Mortise locks are more reliable and durable, so they are more often used. The most popular type of mortise locks are cylinder locks.

Before dismantling the cylinder mortise lock, you need. The handle is also screwed to the door with self-tapping screws. Sometimes they are hidden under a decorative cover that can be put on tightly or screwed on. To remove the fittings, it is enough to pry it with a thin screwdriver or turn it counterclockwise. By unscrewing the screws, you can easily remove the handles on both sides of the door.

To repair or lubricate the cylinder lock, it is not necessary to remove it completely. As a rule, breakdowns occur in the lock cylinder. To remove it, at the end of the door, unscrew the middle bolt located on the lock bar. To neutralize defense mechanism, which holds the larva, insert the key into the lock and turn it 10-15 ° clockwise.

If the lock needs to be dismantled completely, the upper and lower bolts are unscrewed from the bar at the end of the door.

It will be useful for any owner to know how to disassemble the handle on the door, especially the interior one. This fitting is subjected to a serious test by all tenants, so someday it will fail, and it will need to be replaced with another one. In this case, you do not need to call specialists, you can handle it yourself, while saving on the employee's wages. Moreover, this business does not require great skill, but only a little skill. The dismantling process may differ depending on the type of handle, but the whole process should not cause any particular difficulties.

How to remove the handle from the interior door? Before proceeding with the analysis of the mechanism, you need to find out what kind of classification it belongs to. The division is based on several criteria. The one described below is suitable specifically for parsing a pen, because it has a classification according to design features.

Varieties of handles

Press. Such a handle is attached on both sides of the door leaf and has an L-shape. Opening occurs due to the load on the handle, after which the tongue is set in motion. The disadvantage of this fitting is that it is very traumatic.

Swivel. The opening method is the same as that of the push, only the tongue is set in motion not by pressing the handle, but by turning it. Such models are often not very convenient, because to scroll it, you need to have your hands dry, otherwise they will slip. When replacing them, a reasonable question arises about how to unscrew the interior door handle.

Stationary. This handle does not have a latch. It is attached with screws directly to the door leaf. It happens one- or two-sided, while it has an axial connecting element.

Reasons for parsing a pen

It is not so difficult to disassemble any of the models of door handles, because they have a similar design.

At the same time, it is extremely rare to carry out the analysis of this fitting. What reasons can lead to this? How to remove the handle from the interior door?

The first reason is breakdown. It occurs most frequently. Often, inexpensive Chinese models are prone to breakdowns, which are not designed for a constant and rough load. If the prevention of some elements is not observed, then the fittings become unusable. It should be repaired, and sometimes the entire element should be replaced.

The next reason is the need for replacement. Every year the market is replenished with new and improved models. At the same time, you can choose color scheme suitable for the interior, or put a new, more functional and reliable model.

Renovation in a room often involves a change in style. At the same time, they do not ignore doorknobs. Therefore, the question often arises of how to disassemble the door handle.

Another reason is spoiled appearance. If the part is made of low-quality material, then scuffs and scratches will be visible on it very soon, which negatively affects the entire interior.

Removing the push handle

How to remove the handle from an interior push-type door? This mechanism is more difficult to disassemble, because in its design there is an axis rod, due to which the handle is held. It is tightened with a tetrahedron.

The process of parsing the handle must begin with the removal of the plugs around it. They are fastened with screws or tightly pressed. They are very easy to remove with a minus screwdriver.

On one side of the door, you need to unscrew the fittings and remove. Then the second part is removed, on which the axis rod remains.

If the handle is with then it is also removed.

Following the sequence and accuracy will allow you to remove the mechanism without problems, without damaging the parts and without creating unnecessary hassle.

How to remove the handle from the interior door rotary with a rosette?

When there is no hole on the side of the swivel type fittings into which a key or screwdriver can be inserted, the elements are separated manually. Both parts of the handle should be turned in different sides and gradually remove from the thread. On one of them there will be an axial rod.

In this way, the socket is removed and the screws are unscrewed. When the axis is removed, you can do the following elements - a latch or lock, if necessary. When decorative parts are removed, you need to monitor the use of your strength, because overdoing it can damage the elements.

Removing the rotary knob

The handle with a lock for interior doors of a rotary type is removed as follows.

This will require a key to clamp the spring mechanism. Often it is not included in the package with the product, but it can easily be replaced by a nail or other thin object.

The first step is to remove the decorative plates, which can simply be pry off with a sharp object.

Use a key or nail to move the spring-loaded pin by inserting the tool into the technological hole located on the side. At the same time, pull the handle and remove it together with the cap.

After that, you need to move the fastening screws located on the plate. Then the two parts of the handle can be removed together with the axle.

Assembling the round door handles back is not difficult, only all the steps must be done in reverse order. First comes which is fixed with a plate, then an axis is inserted, fasteners are put on it. Decorative inserts are mounted last. The main thing is not to forget that the decorative flange is first threaded, and only then the main part of the handle is attached.

Removing the fixed handle

How to disassemble a fixed type door handle? They are the least likely to break or deform. This is due to the lack of moving elements in it. Often doorknobs of this type after removal, they do not repair, but change entirely. The withdrawal process is as follows:

1. Self-tapping screws are unscrewed with a screwdriver.
2. One part is unscrewed from the rod, and the second is removed along with it.

This design may not have a central rod, which greatly reduces the process. You only need to choose the right screwdriver to unscrew the screws of a certain diameter.

Removing the latch handle

First of all, when dismantling the latch handle for interior doors with an automatic lock, you need to remove the screws with a screwdriver. Next, unfasten the overlays. Use to unscrew the rod.

After that, pull out the rotary mechanism wrapped in a spring.

popular way

There are several ways in which the latch handle for interior doors is removed. round shape with latch. Here is the most popular one.

It is necessary to remove it with a screwdriver, first from the part where the latch device is located. It is necessary to press on the opened stopper and at the same time pull the handle towards you.

Then the latch is pulled out, for which the screws are unscrewed, after which the latch is released.

Thus, disassembling any door handle with your own hands is not a big problem.