Large DIY cardboard clock. Original DIY wall clock

Beautiful wall clock They are always a source of information about time, but they also decorate the apartment interior and give it a special charm.

Moreover, if you think that it is very difficult to make a wall clock with your own hands, then you are deeply mistaken. This is a very real task that almost everyone can do. After all, for such a watch you do not need to assemble the mechanism itself.

It is taken from an old watch or taken out of a cheap one chinese alarm clocks. And on this basis, you decorate them to your taste, taking into account the design of your apartment.

What are wall clocks made of?

If you decide to make a wall clock yourself or make a grandfather clock with your own hands, then you need to know that this can be made from almost any material. Of course, the most popular is wood. Due to its properties, wooden watches are made by ourselves. different shapes and last quite a long time.

Usually, not only wall clocks, but also grandfather clocks are made from this material. By the way, drawings for the manufacture of wall clocks are usually not required, but they may sometimes be needed for floor structures that have more complex assembly.

Record clock

Plastic and other materials

Plastic watches are also popular. They are even more durable, but their production is more complex. An original watch can be made from cardboard, and the simplicity with which this can be done is surprising. As a material for a wall clock, you can use paper or, for example, gramophone records.

Pay attention!

It’s quite possible to make a clock for the kitchen from a tin can.

There is a great variety of additional material, used mainly for making arrows. These could be tree branches, buttons, pencils or wire.

Cardboard clock

As we have already said, making cardboard clocks is quite simple, so we will now tell you how to make a clock from cardboard yourself. In order to carry out this undertaking we will need the following materials and tools:

Clockwork. It can be pulled out of an old unnecessary watch.
A piece of corrugated cardboard. Its dimensions depend on the dimensions of your future product.
Wooden disk.
, PVA glue, kraft paper (special high-strength wrapping paper).
(fine-grained and possibly coarse-grained), hook, decorative elements.

Paper clock

Main stages of execution

First you need to take a disk made of wood (the same goes for wooden clock), and use a hammer drill to make a hole for the clock mechanism. After this, we cut out two circles from cardboard and glue them on both sides and in one of them we also make a hole for the clock mechanism.

Having made the base for the clock, you need to cover the ends of the disk with cardboard, cutting out a piece with a width equal to the thickness of the disk and a length equal to its circumference. We fix it with PVA glue. Then you need to cover the clock with kraft paper and, on the reverse side, fix the hook with which we will hang our product on a nail. By the way, a master class on watch making can be viewed below.

Final work

Now we need to paint our disk black. It will be enough to do this with front side. After the surface has dried, we make a hole for the arrows using an awl. Now we need silver paint, which contrasts as best as possible with the black color of the disk, and use it to apply the divisions and numbers on the dial. We paint the arrows with the same color. We finish our work by installing the clock mechanism and decorative decoration ends and edges of the disk.

Pay attention!

This can be done, for example, using rhinestones.

As you can see from the instructions presented, almost anyone can make a watch from cardboard.

Wood clock

Let's look at how quickly you can make a wooden clock. To make them you will need the following materials and tools:

Wooden disk with a diameter of 330 mm.
Wooden sticks and balls of small diameter in the amount of 12 pieces.
Clockwork.
Sandpaper, glue, .
Wire cutters and hammer drill.
Black cardboard and paint in two colors.
Pencil, scissors, ruler.

Step by step instructions

Sand the disc and balls until smooth surface and wipe them free of dust.
We cut the wooden sticks to the same length. We choose the length ourselves.
Using a punch, we will make a hole in the center of the disk intended for the arrows.
Drill 12 holes at the end of the wooden disk. They will serve as grooves for sticks with balls. The distance between the disks must be the same. To do this, you need to use a protractor and make marks every thirty degrees.
Pour glue into the holes and fix wooden sticks in them.
At this stage of making a wooden watch, you need to treat the surface with a primer and, after drying, apply several layers of paint. The paint color, in our case, should be white.
Now we need to paint the balls red (it is most suitable for a white disk). To make this convenient, we will need a piece of foam plastic and the remains of our wooden sticks. We string balls onto them and paint them, after which we insert them into a piece of foam plastic and wait for them to dry. For painting we use a spray, since it is unlikely that it will be possible to paint evenly with a brush.
After drying, insert the balls into sticks and “sit” them on the glue.

The final step will be to install the clock mechanism on the back of the disc and fix the hands to it. We will make the arrows from thick cardboard, painted black.

This is interesting! do it yourself - master class

Paper clock

In order to make a clock out of paper we will need the following materials:

Clock mechanism and hands.
The dial is made of wood or other dense material.
Paper for decoration and buttons.
Decoupage glue (acts as glue, varnish and sealant), regular glue, paints.
Small paper plate.
Ruler, scissors, pencil, pen.
Brush and foam brush.

Plastic watch

Manufacturing stages

Let's look at how to make a watch with your own hands step by step.

First, we cut the paper (choose the color that suits you), in the shape of an elongated trapezoid, along the length of the dial. In this case, all pieces must be the same in size and shape. Total area The paper should be larger than the dial so that you can bend the ends later. Then we fix the paper to the dial with decoupage glue and wait for it to dry. After this we bend and glue the hanging ends to back side dial.
Apply decoupage glue to the surface of the dial in several layers. Each subsequent layer is applied to the previous one, but after complete drying. At correct application, the surface of the dial will become glossy.
We mark the dial. This is conveniently done using a paper plate. That is, first we mark all the dots on the plate, then we apply it to the dial and put the dots on it. After that, in place of the numbers, we glue, for example, buttons or something else that your imagination is designed for.

The final stage will be coloring the arrows in desired color, most suitable to the design of the watch made, and connecting them to the clock mechanism. At this point the work will be completed and you will receive the watch original design own production.

DIY wall clock video:

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos on the topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

Hello dear friends and readers! Today I want to show you how to make a watch with your own hands for a child.

All parents know how important it is to teach their children to correctly tell time using a clock. Especially if the baby is going to school.

Many children have difficulty counting minutes. Some people cannot understand what 13, 14, 15, etc. hours mean.

To easily explain how a clock works and how to correctly determine the time using it, you can make a model of a clock with your own hands at home. Moreover, it is not at all difficult.

How to make a watch with your own hands

For the craft we will need:

1. A sheet of colored or white cardboard

2. Sheet of colored paper

3. Low box or box lid

5. Ruler, pencil, compass

6. Markers

7. A piece of foam

8. Needle with a tip at the end

9. Scissors

Execution sequence step by step with photo

♦ Take the box and turn it upside down.

♦ Cut out a square from cardboard to the size of the box and glue it, this will be the case for the watch.

♦Cut out a circle from colored paper. We draw it using a compass; you can also trace a round object, such as a plate.

> First, we divide our circle into equal 12 parts, in each part we write numbers with a felt-tip pen from 1 to 12, like on a clock.

> Below, opposite each digit indicating the hour, we write the minutes in a different color.

> We draw lines from the edge between the numbers, 3 cm long, and cut along them with scissors.

♦ Then we draw and cut out arrows from cardboard:

>Make the hour hand 6 cm long and 1.5 cm wide.

>Minute hand - 8 cm long, 1 cm wide.

♦ Glue the circle with the dial to the center of our body, leaving the edges free.

♦ We bend each edge in order, starting from 1 and write 13 under it, under 2-14, under 3-15 and so on until 12.

♦ Attach the hands to the center of the clock using a needle with a tip.

♦ To sharp end the needle does not stick out from the bottom, you can attach a piece of foam or cork to it.

Now you know how to make a watch with your own hands from cardboard and paper for a child.

With their help, it will be much easier for your baby to learn to tell time.

Please press the buttons social networks and share information with your friends.

You don’t need to know the clock mechanism at all to make original ones. DIY wall clock. In any home there will be broken clocks and inexpensive alarm clocks made in China. From all this wealth you can create original and useful decorations for the interior with your own hands.

WHY ARE WALL CLOCKS SO INTERESTING?

Clocks are a kind of conductor of the mysterious invisible, but felt by everyone energy called Time. Therefore, in the human mind, watches also carry a charge of something mystical. Clocks have an interesting, inexplicable property of speeding up or slowing down as they please. People will always be partial to watches and the Time they personify.

How to make a wall clock with your own hands?

Check out these interesting design solutions. The photo shows that creating an original wall clock with your own hands is quite possible for a simple housewife. As design solutions, such hand-made watches will be the brightest and most attractive place in your interior!

Here we should assume that the dial can be anything. The main thing is that such watches must be beautiful and, like design objects, must convey some idea.

Creative thought, given direction, is very fruitful. Once you feel like a designer, you will feel like a designer forever. And such a beneficial direction as creating original wall clocks with your own hands is simply inexhaustible.

Here is a photo of a dial made from a large lid wooden reel, on which cables were previously wound. Here the designer saw precisely the interesting texture of the lid as a circle, without paying attention to the main purpose of the item. Stenciled inscriptions and a metal cover on the bobbin hole perfectly emphasize the idea of a dial made of wooden strips.

A clock made from halves of a globe takes up a lot of space, but looks amazing. Such composition watches are suitable for and will give the spirit of travel. By the way, such a watch may be well suited for a travel agency.

Wall clocks create something homey, similar to grandma’s chest...

And the ball clock with rounded hands is a real time machine.

Wall clock-picture and the following image, a clock made of draped unusual material flat surface may be suitable for the living room and hall...

Interesting color scheme visually hides the hands on the clock, and the clock-map will allow you to travel around some country. Additionally, you can specify a lot of different data and check the boxes of the places where you have been. Very original design solution for a DIY wall clock.

But these laconic watches in the form chessboard fit well into the strict style of a living room, office or library.

Hours from tin can- this is of course for the kitchen. The following photos clearly show that even such an abstract thing as a clock spring can be a decorative item.

Very interesting solution make the dial from a cut of wood, and the hands from twigs.

Figures cut from old gramophone records can be distinguished in separate species creativity. They themselves are very creative and have the right to life. But combined with the idea of time indicators it’s just great!

DIY wall clock design

People very often, having become accustomed to a certain environment, do not dare to make even the slightest changes to it. And this static nature is so contrary to the creative spirit sitting in each of us. Try to change this static, start with an original handmade wall clock.

When a child turns 4-5 years old, he begins to take an active interest in the lives of adults and ask various questions. This is the most suitable age to teach your baby the concept of time. ? Children's watches are a great way to master it, especially if you make them together with mom or dad, explaining their purpose and rules of use to the baby during the manufacturing process. We invite you to familiarize yourself with several simple master classes on how to make a children's watch out of cardboard with your own hands.

Craft “Clock made of cardboard”

A preschooler can make a homemade toy clock out of cardboard with the ability to move the hands himself. By studying them during the game, he will easily learn this science.

Cut out two circles from thick cardboard of different colors. You can use compasses or large plates for this.
Now you need to cut out the hands of the clock (use cardboard in a contrasting color) and, if desired, the edging for the base sheet on which the clock will be glued. The base is needed for the strength of the product.
Place the smaller circle in the center of the larger one.
Then stick the watch blank onto white sheet cardboard (it is advisable to take thicker material).
Secure the clock hands with a bolt in the center of the circle so that both of them move well around the center.
Glue on the border.
Indicate the time on the clock with numbers. To begin with, you can introduce your child only to hours (from 1 to 12), and when he masters this, then to minutes. The inscriptions should be made along the edge of the outer, large circle.
Let your child decorate his first watch with stickers or other decorative elements.

Cardboard clock for children

This kind of clock can be made from cardboard, bright colored lids and a clock mechanism.
Prepare the sheet corrugated cardboard(for example, from a box or crate).
Arrange 13 multi-colored lids from vitamins, yogurt, etc. (you can replace them with large buttons) in a circle. Estimate what the diameter of the future watch should be.
Cut out a circle from cardboard - the base of the clock and, using a corner ruler, mark on it the locations of the covers.
Using a hot glue gun, glue the lids at an equal distance from the center and from each other.
Use a black marker to trace and color the edges of the circle.
Now make a hole exactly in the center of the circle (corrugated cardboard can be easily pierced with a pencil).
Install the clock mechanism and screw in the hands. Glue a cardboard circle with a number in the center of each cap.
Insert the battery into the clock and set the time.

To create cozy home, there are many details that need to be thought through. First of all, this applies to interior and decorative elements, such as curtains, lamps, clocks and pillows. Today we propose to consider how to make a watch with your own hands. Anyone can make them. Main task– install a large working mechanism, usually bought in a specialized store. Having an old watch will greatly simplify the task, because you can use its mechanism. Everything else depends on your skill and imagination.

Wall clock using decoupage technique (MK)

You can make a clock for the kitchen with your own hands from scrap materials. But, if you want to create an original product, then the decoupage style will become ideal solution . These watches look elegant and will become a unique decoration for your home interior. We offer interesting master a class that will help you create your own wall clock at minimal cost.

You also need to prepare:

clockwork hands;
wooden base (round or square);
napkins and ready-made patterns on paper;
acrylic paints;
tassels;
sponges and varnish.

Making a watch with your own hands in decoupage style is carried out in a certain sequence:

1. The workpiece is being processed . The base of the future product must be sanded using sandpaper and cover three times with white acrylic paint, it will serve as soil.

2. When the paint has dried, retreat a couple of centimeters from the edge of the workpiece and outline the future framework .

We outline the frame

3. The base is given texture , choose a paint color that best suits the interior. The paint is diluted and applied with a sponge in a chaotic manner to age the product.

Apply a second coat of paint

4. The frame of the future watch stands out more dark color , brown paint is ideal for this.

Painting the frame

5. From prepared rice paper pattern is cut out and applied to the workpiece . If a napkin is used, then it is soaked in water and applied to the selected place on the dial. Glue is applied over the image.

Glue the image

6. Now you need to use your imagination and make sure that the drawing fits organically into the surface. Paints of appropriate tones and a sponge will help here. With their help a smooth transition is created from the pattern to the surface of the dial. It is important to be extremely careful; if you cope with this task, then you are a great master.

Making a smooth transition

7. At this stage the product needs to be aged , to do this, apply a two-component cracking agent to the surface with a dry brush (you can buy it at a store that sells craft supplies).

Apply a layer of craquelure

8. After the craquelure dries, cracks will appear on the product, which will give it elegance. The workpiece is varnished as a protective layer.

Varnish

At the end, all that remains is to install the arrows, the mechanism and glue the numbers (the latter can be drawn according to the template). Now the clock has a completed look; it can be used as decoration for the kitchen, bedroom, or living room.

The finished result

On video: making wall clocks using decoupage technique

Cardboard clock (MK)

Some needlewomen make their own kitchen clocks from cardboard.. Such a decorative item can become not just useful, but also an exclusive item. Before answering the question of how to make a clock out of cardboard, you need to make sure you have the appropriate materials.

To work you will need:

thick cardboard;
multi-colored caps or buttons;
operating mechanism and arrows;
compass;
PVA glue.

To make your own wall clock, follow these steps:

1. Using a compass, make a circle on cardboard and then cut it out.

Cut out a circle from cardboard

2. Using glue, caps or buttons are glued in appropriate places.

Glue the caps to the cardboard

3. Numbers are depicted on the caps (use a marker or acrylic paint, depending on the material from which the parts are made).

Drawing numbers

4. A hole is made in the center of the intended circle to install the mechanism and hands.

Making a hole

5. Last step— installation of a mechanism with arrows. A battery is also inserted to operate the clock.

As you can see, you can make a clock out of cardboard very quickly and you don’t need any special skills, but such a decoration will complement the interior of the chosen room.

Quilling style product(MK)

A good option would be to make a watch in the quilling style. Paper strips are used in such arts and crafts different widths and length. They are twisted into patterns and a composition is formed. You can make a similar clock according to this scheme:

The basis for the watch will be thick cardboard or plywood. Black paper is glued to the body. To create contrast, decorative elements are mainly created from white or light-colored paper. When choosing a color, the interior of the room where the clock will be installed is taken into account. They should fit harmoniously.

This is what the finished product looks like

Numbers are made from prepared strips of paper. To do this, use short strips. At the same time, decorative elements are twisted. Various compositions are used for decoration. These could be flowers or just patterns. It’s better to draw a sketch in advance, which will allow you to evaluate appearance future product.

We twist paper strips into patterns and numbers

3. The created numbers and decorative elements are glued to the selected places using PVA glue.

Glue the finished elements to the base

4. A hole is made in the center of the base and a mechanism with arrows is installed.

Installing the clock mechanism

Ideas for creating wall clocks vary. Focus on the materials that you have available, but there may be a lot of them. Acceptable use additional elements, be it lace, satin ribbons, beads, rhinestones or even stickers. A kitchen wall clock made of paper or other materials will allow you to always know the time. A made decorative element with my own hands will be pleasing to the eye.

As an idea you can try wrist watch, but in this case everything is much more complicated. This is due to their small in size. The best option This will be an experiment with straps. Combining chains of different thicknesses will create original watch on hand. Also, zippers, elastic bands, and beads can serve as a decorative strap.