Sawing out of plywood is one of the most fascinating and, moreover, useful options leisure! It develops creative skills, accuracy and precision, instills work skills and helps to master various tools.

As part of our article, we want to introduce you to the technology of sawing from plywood sheets and two easy-to-make crafts. All drawings are included, so if you wish, you can repeat them with your own hands, together with your children, who will certainly be interested in this process from start to finish.

General cutting technology + ideas for crafts made from plywood

Plywood – universal material, used in the most various fields! You can create many amazing things from it, which is what we will do now. Like any other creative activity, sawing from plywood sheets begins with preparing tools and material.

A simple set of tools

So, we will need:

• . It is a wooden or metal frame, shaped like the letter “P”. At the ends of this frame there are special clamps with screws into which the nail file is secured.

For your information!
Jigsaw files are thin and narrow steel strips with sharply sharpened teeth on one side.
Alas, they break easily, so it is better to take them with a reserve.
Fortunately, the price of these devices is quite low.

• Special key for securing the file in the jigsaw.

• Three-layer plywood sheets (the thinnest)- This best material for cutting something out with a jigsaw. But if you don’t have thin plywood, you can also use thick plywood (from 4 to 9 mm).

• Sawing stand. You can make it yourself from a board about 10 millimeters thick. The stand is positioned on the table so that the part with the cutout hangs over its edge. It can be secured to the workplace using screws or nails.

• Skin (coarse-grained and fine-grained).

• Awl, files and needle files.

• Pliers - in case the file gets stuck in the plywood - they are very convenient to pull it out.
• Hacksaw (in case you have to).
• Carbon paper.

• Several sharpened pencils.
• PVA glue.

• Drawings of the future.

Sawing technology

For convenience, below is step by step instructions, in which the process of working with plywood is described in detail:

1. First of all, you need to prepare your desktop. Wipe it with a damp cloth to remove small mounds of sawdust and dust. Check that all the tools are in their place. The room in which your workplace should always be ventilated and well lit.
2. Next comes the preparation of the most important tool - the jigsaw. To do this, unscrew the screws and secure the ends of the nail file in its clamps.
   The file is inserted so that the direction of its teeth is not inside the jigsaw frame, but forward with a downward slope. The inclination of the teeth is easy to check - just run your finger along them. The already inserted nail file is tensioned using several turns of the tension screw.

Important!
The file needs to be pulled tight, otherwise it will not cut well and will quickly break.

In this way, the file is fixed into a wooden manual jigsaw. Regarding metal tool, then here this process is a little different.

First, one end of the file is inserted into the lower clamp, then the end of the jigsaw where the upper clamp is located rests against the edge of the table. Next, you need to lightly press the handle with your chest so that the jigsaw frame bends slightly and the clamps come closer together.

While holding the tool in this position, you need to secure the second end of the nail file in the upper clamp. After this, the jigsaw is released: the frame takes its original shape, the ends with its clamps diverge again and tighten the file.

1. Have you noticed that the surface of the plywood is a little rough, and in some places there are cracks and chips? You need to get rid of them using sandpaper, cleaning all defects against the grain. The quality should be even, absolutely smooth, silky to the touch and glossy in the light.
   After this, check the plywood sheet again - if there are no visible defects, then you can proceed to drawing the drawing.

1. A drawing of the future craft is drawn on a sheet of paper. Then a suitable piece of plywood is covered with a sheet of carbon paper, a drawing is placed on top, secured with buttons and outlined with a sharp pencil.

1. The plywood with the translated pattern is placed on the stand, and the jigsaw is positioned so that the file is in the slot of the stand. The parts are cut out using up and down movements. The file cuts only when moving downwards; at this time it is necessary to slightly press it forward.

Advice! Watch carefully - the nail file should move straight perpendicular to the plywood, without tilting. And when the drawing requires you to make a turn, then turn the plywood, not the jigsaw.

If the parts have internal holes, then cutting should begin with them, and only then move on to the external contours. To cut a hole efficiently, make a puncture on its edge with an awl or drill. Next, release one end of the jigsaw file from the clamp, thread it into the puncture made and secure it with the clamp again. Having cut the required hole, remove the nail file in exactly the same way.

Attention!
During operation, the file becomes very hot and, becoming hot, quickly becomes dull and breaks.
Therefore, periodically cool it by wiping it with a damp cloth or taking a break.

1. Clean all sawn parts: holes and ribs of deep recesses with a file, the rest of the surface with fine-grained sandpaper.
2. Final stages– assembly and gluing of the craft with PVA glue. There shouldn’t be any difficulties here, the main thing is to understand the drawing correctly.

If desired, you can also paint the product, varnish it or burn it on it. beautiful pattern. It all depends on your imagination!

Mercedes car model

Try to cut out such a simple Mercedes model, which can become the first in your collection of toy cars. Drawings of crafts made from plywood using a jigsaw will be presented below. When assembling a craft, look at them, or rather, at the numbers by which the assembly is carried out.

This is done by next rule: part number 1 is attached to another part number 1, two to the second, and so on. If some parts cannot be inserted into the required grooves, file them down or clean them with needle files. Did you manage to assemble the product without any problems? You can safely glue all the parts together!

Animal figurines

A very simple, but nevertheless interesting idea. So, together with your children, you can have fun cutting out various animal figures from plywood. To do this, you just need to cut out four legs and glue them to the body on both sides to give the toy stability. In some cases, stands are made and the figures are mounted on them.

As a result, you may end up with a whole toy zoo or story scene. Believe me, children will be delighted with such an exciting activity, and it won’t take up much of your time. Then you can ask your wife to help the guys color their new “friends.”

Conclusion

Creating all sorts of products with your own hands is always exciting! After all, personal work, time and a piece of creative thought are invested in every detail. Therefore, finished crafts are valued as a real work of art and are found in the most honorable places in the house. In the video presented in this article you will find additional information on this topic. Have a creative flight!

Similar materials

(17 ratings, average: 4,24 out of 5)

When wondering what to do with your free time, you should try sawing. At a minimum cost, you get maximum pleasure and improve your home or dacha, you have the opportunity to make unique original souvenirs as a gift to relatives and loved ones, and all this with your own hands.

The person who receives such a gift will be very pleased, because the main thing is that you spent your time and did it with all your heart. What is useful in this hobby?

Material and tools for cutting from plywood

Before you start doing the work, you need to decide what you need?

First of all, it's the material. IN in this case- plywood - a material made from several layers of wood veneer (the minimum number of layers is 3), glued or bonded with a synthetic compound, in such a way that each new layer is laid perpendicularly. The thickness of the sheet depends on the number of layers.

When choosing, you need to consider several details:

• unsanded plywood (NS);
• plywood, sanded on one side (Ш1);
• Plywood, sanded on both sides (Ш2).

If in further opportunities If there is no way to process (sand) the material, then it is worth taking plywood of the Sh1 or Sh2 type, this will greatly save time in achieving the desired result.

The next step is a tool to complete the work or craft you have in mind.

Tools for fulfilling your plans

As you make your own crafts, you may need:

Everything you need has been listed above, so what can you make from plywood?

Plywood and crafts made from it

A large number of things can be done with your own hands. In this case, plywood is taken as the basis; here is an incomplete list of products:

Craft ideas

It all depends on your desire and taste; any coloring picture is perfect as a template; imagine that you are making an applique, only instead of paper there is another material (plywood).

Take any picture you like (if you have the right skill and imagination, you can draw it yourself), transfer it to a sheet of plywood and, by sawing along the traced contour, give it the desired shape. And then we sand it, finish the treatment and you can start painting or burn something interesting and varnish it. Done, beauty to the site!

For prefabricated work, you will have to look for drawings on the Internet, for example, a drawing of a box.

And here's the details:

Connect the walls of the casket at the corners into a lock.

Following this pattern, you can assemble a beautiful casket.

Many more options for templates and drawings various products and plywood figures can be found on the Internet. Special sets are sold in stores three-dimensional figures, a great activity for children and adults!

The dacha has long been a place of mental relaxation and recovery after everyday work for a city person. Some summer residents prefer to create a mini-collective farm on their site with regular planting of various healthy vegetables and fruits, while having all the necessary products all year round. Some people just want to relax on a piece of nature, breathe in unpolluted air or go to a barbecue. But the holiday is especially pleasant when summer cottage plot really well maintained.

Beautiful decorative elements made from plywood can turn any dacha into a work of art and make weekends at the dacha much more enjoyable. Crafts from plywood and sawing from plywood (how to saw from plywood can be found here) - it’s not that difficult. The main thing is to have a correct understanding of materials and tools.

Material selection

The first and most main criterion a job well done - right choice material. Plywood is the most common material in this matter: its physical properties are most suitable for cutting with a jigsaw. But there are several varieties of plywood that correspond to a certain type and scale of the future wooden product.

To work better with physical properties plywood, you need to understand how it is structured from the inside. Plywood sheets are made from veneer - a sheet of wood (from 0.5 to 1.5 mm thick), which is made by cutting a thin layer from solid wood in various ways(peeling, planing or sawing). The most natural and most durable material - natural veneer, produced by planing or sawing. The plywood itself is made by gluing several layers of veneer in a cross pattern (along and across the fibers) using a factory or manually. A very durable material, available in many construction markets and having excellent qualities both for making crafts and for household work. The only thing that should not be allowed is moisture. There are a great variety of types of plywood: painted, with backings made of other materials, from peeled wood, from a solid cut (or rather, sawn), etc. The leaf thickness is usually 0.5-2 cm.

If the work is large-scale, with large elements, then it is worth taking thick, multi-layer plywood. If you have to cut out miniature parts, then a thin sheet of plywood is more suitable. But in any case, the material must meet a number of requirements, by paying attention to which you can wisely choose a good product:

• Veneer color. It must match the style and character of the future product. You can close your eyes to the heterogeneity of the color of the source material only if varnishing or painting is used at the end of the work.
• Optimal sheet thickness. As previously noted, each job requires its own material parameters. And for volume and greater artistic effect, you can use plywood of different thicknesses when working on one product (if the item is type-set).
• Specific humidity of the material. Very important criterion to maintain the functionality of the jigsaw (or rather, reduce the frequency of replacing removable files) and simplify working with wood. Before starting sawing, it is better to dry the material as much as possible so that it becomes more pliable.
• All work that is more complex than simple linear figures is best done from grade 1-2 plywood: this way you will save yourself from unnecessary unpleasant moments in the form of cracking or, conversely, excessive flexibility of the material when cutting.
• When purchasing, it is better to carefully select and inspect each sheet, because such small flaws as barely noticeable spots or knotty cuts are invisible only on the sheet, but on finished work may be noticeable.
• It is also more advisable to take sheets without cavities or holes filled with resin, avoiding delamination or poor-quality sizing of the layers.

In addition to the basic product, there are a number of products that will improve appearance Your work is made of wood and will extend its life. This is especially important when the plywood figurine is subjected to weather testing, standing in the sun and exposed to moisture in the country. There are several methods of final processing: painting, staining (impregnation with varnish or paint), lamination, etc. Usually 1-2 layers paint coatings enough to create protection for a plywood craft.

You can also cover the product with an ornament or design. For this you can use various types paints: acrylic, gouache, watercolor. The main condition for painting: before starting, sand the plywood and prime it acrylic varnish or even PVA - this way its decorative qualities will become much better.

Choosing a tool for working with plywood

Tools for cutting plywood products can be hand-held (hand jigsaw, hand drill, screwdrivers) and electric (jigsaw, band saw, electric drill). What you should definitely stock up on before starting to work with plywood:

1. Two types of jigsaws: electric and manual. In this type of needlework, these are 2 mandatory tools that are not always interchangeable;
2. A set of files of various thicknesses: files will become dull and sometimes break, so an extra one never hurts;
3. Files for sanding and shaping edges;
4. Various household tools: hammer, pliers, set of screwdrivers, awl (for working with parts and assembling the finished product);
5. Hand drill and drill bits different sizes to her;
6. Pencil, charcoal or chalk, depending on what is more convenient to work with for drawing.
7. Copy paper for drawing, if it is not possible to draw by hand;
8. Sandpaper for final sanding of the product.

It is also important to arrange a place for comfortable work with tools. There are specialized workbenches for sawing, but you can do without it if you have a table on which it is convenient to place a jigsaw and other tools. But it is better to equip the table with an additional platform for the machine: basically, this is a formatted piece of timber attached to the table, which will serve as a platform and clamp for the jigsaw.

A jigsaw is often used for coarser parts: small and technically complex elements It's better to cut it by hand. Band saw in general, it is mainly applicable for thick sheets, the elements from which are often made large: the power of the saw is even higher than that of a jigsaw, so it is used very rarely for artistic purposes.

A drill or awl is used to drill holes and small parts that cannot be made with a jigsaw. A thin drill can also be used to round out curls and other shaped elements.

There are 3 types of files, which are the main working element of a jigsaw:

• With fine teeth and thin ribbon;
• With large teeth and a thick ribbon;
• Double tooth file.

For inexperienced craftsmen, the second option is more suitable, as it is easy to use and helps rapid development dexterity in cutting, so-called. "stuffing" the hand. Unlike a file with large teeth, a file with a thin blade is for small parts and is much more difficult to control. In the hands of a beginner, it can easily break, since without experience in working with complex parts it is impossible to feel the tension force of the file. When purchasing, you need to pay attention to the quality of the teeth and the strength of the blade: a good file bends freely.

Technology of work execution

Before starting cutting, prepare necessary materials and tools. We check the quality of plywood. If it satisfies your task, you can begin to sand its surface before sawing with coarse and fine-grained sandpaper.

Then we make a sketch or transfer the drawing of the drawing onto the material (it is better to do the sketch in such a way that you have to cut less along the fibers). It is advisable to make the drawing carefully, without smearing the parts, as it will be more difficult to cut them out later.

According to the drawing, holes are made with an awl or drill in those places where the cut with a jigsaw will begin. Try to plan and drill all the holes in the plywood in advance, as once you start sawing, the sheet may crack under the drill. Before cutting out figured parts, it is worth practicing the technique on simple objects.

During operation, the jigsaw (file) is directed from top to bottom, so it is important to properly fasten the blade so that the cutting part is directed downward. It is also important to properly thread the blade before starting work so that there is tension in the saw blade. But there is no need to leave it in this state after finishing work, just as you should not leave a file stuck in the product - it can easily break.

When working at the machine, be prepared to constantly change the position of the workpiece: make several cuts in 1 hole, thus allowing the product to rotate freely around the blade.

If the tool deviates from the pattern while cutting, try to free the blade by giving the file free space and correct the direction.

At the end of the work, all edges are brought to a smooth state with a file and sanded with sandpaper - now the product is ready for coating paint and varnish materials. Here you will need a brush for varnish or PVA glue. It is advisable to coat the product in 1-2 layers. If you plan to apply painting on plywood in the future, it is better to paint it in 1 layer.

Drawings and drawings of plywood crafts for decorating a dacha

Here are examples of some plywood works for the dacha, made by cutting with a jigsaw. Thanks to them, the garden and dacha as a whole look well-groomed, which inspires you to create your own masterpiece. To create your own work, just a little practice and imagination is enough.

A few examples of drawings will help you decide exactly how to decorate your garden at the dacha:

Many people begin to hone their skills in childhood. For girls it is sewing and knitting; for boys it is carpentry. Ordinary children's interests develop into something more over time. In this regard, the children cutting out crafts from plywood with a jigsaw, as a result, over the years, acquires the features of design art.

Plywood jigsaw and fantasy - elements of personality development

Indeed, the plywood sheet in in capable hands may become beautiful object interior And even for beginners who have encountered and become interested in making original wooden crafts for the first time, this will certainly be an interesting and exciting activity. And at the same time useful, honing skills decorative processing tree.

This activity is a great opportunity to have a great time with interest and benefit. Relax and at the same time enthusiastically do what you love, giving pleasure both to the process itself and to its result. In addition, the created things, which will certainly subsequently decorate the house, will serve to form a common home comfort and comfort.

The main benefit of cutting out beautiful decorative elements made of plywood is in the process spiritual development man, his ennoblement. Mastery, skill, labor development, all this is inherent in these classes.

Work shapes personality. And working on what you love is doubly interesting. Time no longer has power over busyness here. They don't notice him. And this is one of the signs of true passion.

"Exhibition" of skill

Arranging a house or apartment involves making a personal contribution to feel the aura of inner beauty. And sometimes even externally, since the placement of objects made of plywood can be located, for example, on the territory of a summer cottage.

Of course, the result of fruitful work will always find its rightful place. Whether it's a carved lampshade for table lamp or light plywood crafts in the form of figures, located on bookshelves and acting as book dividers.

More complex elements are performed with a solid knowledge of working with wood material. To rush and immediately start cutting out such objects means wasting time and ruining the material.

First steps on the path to perfection

It's worth starting with the simplest. And for the initial comprehension of the science of carving, choose certain educational literature to help you, presented as a guide to making decorative wooden elements from plywood sheets. Take advantage of the advice of experts on thematic Internet sites. Be sure to look at photos of crafts made from plywood. This in itself will attract interest in such work.

Nothing awakens zeal for something more than seeing its results. And products made from plywood sheets, sanded, treated with paints or varnish leave an indelible impression.

Separately, it is necessary to mention this required element like drawings. They are necessary in any case. When making complex figures and when cutting out the simplest parts. It is much easier to work with a material when its future appearance is determined in advance.

Returning to the question of the initial steps, it is worth mentioning such important things as carefully studying the rules for using tools and materials. And of course about mastering technology. It is quite simple and will take a little time to master.

But in order to achieve the master class level, in addition to consolidating in memory technological stages process of making wooden plywood crafts, additional knowledge is also required.

Signs of a true master

A true master will immediately determine:

• what type of plywood sheet is best suited for sawing and processing. Wood varies in quality and properties. Some types are easier to work with, but some types are more difficult due to delamination, sudden appearance of cracks and other negative aspects.
• what thickness of material to choose for a specific design of a future craft;
• what jigsaw files to buy in order to use them for a long time.

This experience develops over a longer period. But the more interesting it becomes to advance along the path of self-improvement.

Handmade crafts made from plywood, at first simple, unprepossessing, but over time, acquiring real features that confirm high class home handyman, can become a substantive reflection of the formation and development of artistic wooden decoration skills. Sometimes this is expressed in a very original way.

Over a certain period of time, plywood crafts are displayed in a row one after another, and then a picture of the gradual passage of the entire path from a student to a real specialist begins to emerge.

Photos of plywood crafts

Fretwork, hand saw, has more than 450 years of existence. The first mention of this instrument appeared in 1870 in a book about ornaments. Over the past few centuries, all sorts of things have been done with the help of this miraculous jigsaw. decorative items: picture frames, various furniture inserts, stylish boxes and boxes.

Much has changed since then. The jigsaw has also undergone changes - now it has become electromechanical. And this is not surprising. The need for this tool has not gone away, just like in previous times, people are engaged in creativity, some for pleasure and others for profit.

Tool for making decorative and openwork crafts

Sawing with a jigsaw - view creative activity, with which most people are familiar from childhood, from school. By at least, it was not so long ago. When labor lessons began at school and girls learned sewing and needlework, boys were introduced to such tools as jigsaw.

It is not difficult to use, and crafts made with a jigsaw from plywood carry not only artistic value, but also practical application. Manufactured products can act as souvenirs: various boxes and toys, and also have practical applications in everyday life. Decorated elements of the porch of the house, windows, stylish benches with carved legs, beautiful kitchen furniture and many other useful wood products can be made using this wonderful tool.

Ideal hobby tool

A hand jigsaw is a tool for cutting shapes out of plywood or some other material, for example, plastic. Its manual version is budget-friendly - its cost does not exceed several hundred rubles, and its scope is very wide. Shaped sawing using hand jigsaw is the most interesting activity. This is not only a pleasant pastime, but also practical benefits, not only financial, but also moral.

The design of this tool is very simple:

Electromechanical jigsaws

The electric hand jigsaw has become an indispensable tool in the household. It can be used to cut various materials: plywood, wood, plastic, metal, ceramics, etc.

This tool works from electrical network 220 W and is a plastic case with working elements, equipped with a control knob. Its main component is saw blade , which is mounted on a rod located in the front of the device.

The rod is driven by an electric motor. The movement of the cutting blade is reciprocating. To speed up the sawing process, some samples of this tool use the pendulum principle, that is, the file moves not only up and down, but also back and forth.

Cutting blades - consumables and they need to be changed from time to time. They are functionally different from each other - there are attachments for wood, metal, and ceramics. There are thicker blades, with more or less rigidity, with larger or finer teeth. An important characteristic of files is their shank. The most common saws today are those with U-shaped and T-shaped shanks. It is with such files that you need to purchase a jigsaw - then there will be no shortage of consumables.

Electric tools differ in many respects, but in this article we will pay attention to only one important factor - this saw blade play. This characteristic affects the movement towards the cutting blade when figure sawing. Many brands of jigsaws cannot cope with the task of perpendicular cutting, this is especially sensitive when cutting thick wood - the error can be up to 5 mm.

Conducted experiments on figured cutting of wood showed that the best jigsaw turned out to be a tool from the company Festool. Popular company Makita in this competition she showed herself not with the best side- the error of the perpendicular-shaped cut turned out to be quite large (up to 5 mm), and the jigsaw of this brand also enters the tree with large chips.

- this is already professional equipment for sawing. Its design is more complex than the equipment discussed above. The principle of its operation can be compared with sewing machine, which has a jigsaw blade instead of a needle. The quality of the products obtained using this unit is incomparably better. The error of a perpendicular cut with a large workpiece thickness is zero.

The only disadvantage of this electromechanical device is its high price. But this is compensated by the comfort of working on it and high productivity at highest quality the resulting products.

Manufacturing technology of decorative and openwork products

To work you will need the following:

1. Plywood or wooden blank.
2. A template, drawing or drawing of a future product.
3. Manual or electric jigsaw.
4. Files and needle files of various configurations.
5. Wooden square and ruler.
6. Skin of various grain sizes.

Cutting drawings

To begin work, you need to determine what should happen at the end of the work. To do this, you will need a drawing or template of the future product. You can invent and draw it yourself, or use it ready-made solutions. There are many collections containing drawings and diagrams of crafts. The Internet is also replete with diversity. interesting ideas. And for almost everyone there will be an interesting diagram or drawing.

Typically, diagrams of small crafts are printed on A4 paper. To create drawings of decorative and stylish furniture or other large household items, whatman paper in sizes A0 and A1 is used, however, other paper and cardboard media, for example, pieces of unnecessary wallpaper glued together, can also be used for this purpose.

After the drawing is selected, it must be transferred to the material from which the craft will be made. There are several ways to do this:

Technology

After applying the drawing to the workpiece from which the future craft will be made, they begin to cut it out. Sawing begins with the internal elements of the workpiece and only then the outer contour is cut out. This order of work is more convenient - holding the workpiece is much easier.

Holes for the jigsaw blade are drilled in sharp places on the internal contour, which also makes work easier. You need to drill holes carefully, as chips may form on the back side.

To avoid this you need to follow simple rule- Do not drill holes completely. For example, if the thickness of the plywood is 3 mm, then the depth of the hole to be drilled should also be set to 3 mm. This is easy to do if you limit the depth of penetration of the drill into the plywood using electrical tape - wrap it around the drill, leaving only the 3 mm long tip without electrical tape. After drilling, turn the workpiece over and use an awl to make holes.

After the workpiece is cut, it needs to be process and polish. If the outer contour is not difficult to process, then grinding the internal elements is sometimes difficult, especially in sharp corners. It is difficult to sand such places with a file or needle file. Therefore, ingenuity can come to the rescue. You need to cut a thin strip of sandpaper and insert it instead of a jigsaw file and then hard to reach places It will be much easier to process.

The principles of sawing with a manual or electromechanical jigsaw are similar, but there are also differences.

Working with a hand jigsaw

When using this tool you must additional device - sawing machine. It must be equipped with a clamp for attaching to a workbench or table. This device serves as the base on which the workpiece is sawed. This addition can either be purchased at the store, or you can make it yourself from a piece of thick plywood.

When working, the workpiece should be secured at chest level - this will make work more comfortable and maintain posture.

When working with a hand jigsaw, you need accuracy and patience.. The files of this tool are quite fragile, so you need to avoid sudden movements and distortions of the blade, and also not allow the file to overheat during operation; to do this, you need to pause work every 10 seconds and let the cutting blade cool.

When sawing, the jigsaw file should remain in one place, that is, it should not be moved forward or backward, the movement of a hand jigsaw is vertical, reciprocating. They only move the workpiece, turning it smoothly, without stopping the forward movements of the manual jigsaw.

Sawing with an electromechanical tool

The operating principle is very similar to hand tools. The difference is that for a manual jigsaw you do not need additional equipment(machine with clamp). And also when sawing, the shaped movement is produced not by the workpiece, but directly by the tool itself. Wood blank it is firmly pressed or attached to the workbench, and all curly movements are made directly with a jigsaw.

A jigsaw has an advantage over a hand saw- this is the thickness that he can cut out figuratively. A wooden blank 50 mm thick is inaccessible for processing with conventional, non-electric tools. So, if you need to decorate elements of a porch or furniture, then you can’t do without a jigsaw.

You need to be very careful when choosing a power tool, since not all tools allow you to perform high-quality figure sawing of great depth.

Safety precautions

Basic safety precautions are required for all types of physical work.