Milling manipulations today have become available not only to professionals, but also to private craftsmen. This is possible thanks to inexpensive tools that can be used to perform a wide range of tasks. One of them is the Bosch POF 1400 ACE router, which will be discussed below. It represents functional tool household use for working with wood. The model allows you to quickly achieve highly accurate professional results, making the work of the master as convenient as possible. You should not overpay if you are not going to use the router daily and subject it to high loads, it is better to purchase an affordable household model.

Specifications

One of the most important characteristics, which primarily interests specialists and private craftsmen, is power. Bosch POF 1400 ACE has this parameter equal to 1400 W. You may also be interested in the revolutions; their number for this model varies from 11,000 to 28,000 per minute. The tool uses a universal type of milling cutter; additional functionality includes a spindle lock, the ability to support a constant speed, and a function for connecting to a vacuum cleaner.

Conveniently, the Bosch POF 1400 ACE milling cutter comes with a case, which makes it easier to transport and carry the equipment for those consumers who do professional milling work. If we describe this tool, we cannot help but mention the vertical stroke, which determines the maximum milling depth. This parameter is one of the most important for such machines. This characteristic shows the amount of immersion of the cutter into the material. The higher this indicator, the more massive parts you can process. For example, for the manufacture of furniture, a cutter stroke will be sufficient, which varies from 30 to 40 mm, but for processing a thick board, a milling depth will be required, which reaches 80 mm. The Bosch POF 1400 ACE milling cutter is characterized by a vertical stroke of 55 mm.

Supplied with an 8mm collet and backlit working area, and the master will be able to use electronic speed control. Some other tools implement these capabilities mechanically. The speed is changed using the wheel. Manufacturers place it on the body or handle. By turning the wheel, you can set a specific milling speed mode, which will depend on the diameter of the cutter and the material.

What else should you pay attention to?

It should be noted that this tool has a microlift; it is necessary for ultra-precise adjustment of the depth of material processing and is a special screw with which you can adjust the position of the cutter to the millimeter.

If we consider the Bosch POF 1400 ACE router, then among its characteristics we can also note the presence of a copy sleeve. Working with the equipment will be quite easy, because the weight of the tool is only 3.2 kg.

Additional Features

If you are still undecided whether it is worth purchasing the equipment described in the article, then it is worth noting for yourself that it has a fairly powerful engine with which you can carry out complex work with all types of wood. Under load, the operator will be able to maintain a certain number of revolutions, this is ensured by the built-in system. For convenient installation cutters you can use the spindle lock.

Adjustment of drilling characteristics is guaranteed with an accuracy of 1/10 mm. For comfortable installation The bushings use the SDS system from the equipment manufacturer. A transparent screen will provide protection from flying chips, and soft ergonomic handles will make work easier. The kit comes with a dust removal module; the manufacturer has provided a connector for it.

Consumer Reviews

The Bosch POF 1400 ACE milling cutter, reviews of which will be mentioned below, is provided with the Constant Electronics system, with which you can maintain a certain number of revolutions when working with complex materials such as:

• wood;
• aluminum;
• synthetic plastic.

According to users, a very convenient feature is the system with which you can install the copy sleeve; this does not require the use of additional tools; the fixation is carried out with a bayonet mount. In addition to the above features, it is worth highlighting additional features, significantly simplifying the work with the equipment. Here, according to users, you can include a fairly strong aluminum support with a removable plastic guide; it can reduce friction and eliminate damage to the parts being processed.

The handle has soft pads, with this you can effectively control the progress of work. Those people who have already purchased this model note that they really like the presence of an adapter for connecting to a dust removal device; this addition allows you to use a regular household vacuum cleaner or power tools.

Additional Features

The Bosch POF 1400 ACE 060326c820 milling cutter is an economical tool with which you can carry out work with high precision and accuracy. A special built-in system saves the user time, because the copying equipment can be installed simply and quickly. The depth of entry is adjusted with pinpoint precision, and the manual Fine Depth Control function helps to create any patterns.

The equipment also ensures accuracy in work, because it is equipped with an electronic stabilization system, with its help you can make the most even and accurate cuts. Fraser electric Bosch The POF 1400 ACE has many advantages, among them the presence of service centers in every city in Russia, where you can contact if problems arise.

Positive feedback on operating features

Users believe that the tool described above has an excellent combination of price and quality. The equipment does not fail even with hard use for a year, despite the fact that it is intended for professional use. The build quality is also noted by buyers; the presence of a case can also be considered an advantage. The device is easy to use, its operation is not accompanied by too much high level noise, and the power is enough to carry out even complex work.

If you are deciding whether to purchase a Bosch POF 1400 ACE router, we recommend reading reviews about it. From them you can understand that for such a price many consumers could not find analogues. In addition, the equipment copes with the assigned tasks perfectly. You will appreciate the smooth start and speed control, work area illumination and a copy sleeve. The microlift also makes the work easier, and if you use the tool in the table, then this thing and is completely irreplaceable.

Negative reviews

If you purchase a Bosch POF 1400 ACE router, you will find 6 cutters included. This tool cannot be called the embodiment of advantages alone; some consumers encounter disadvantages. For example, when you press on the handle from which the wire comes out, sometimes a slight distortion appears. It is also impossible not to note the small capacity of the suitcase; there is no way to put additional equipment. Despite the light weight, for some users the equipment is heavy and bulky, and the weight will take some time to get used to.

Conclusion

The Bosch POF 1400 ACE vertical router is worth purchasing if you sometimes face milling tasks at home. However, for professional use it is best to purchase a tool special purpose. But if you still can’t decide, then you should also pay attention to the cost, which is 8,200 rubles. and may influence your final choice.

Bosch POF 1400 ACE is a professional router for home tasks, as well as for work in production. A depth gauge with a ruler allows you to adjust the milling depth from 1 to 55 mm. The depth gauge is additionally equipped with an 8-level depth stop, the adjustment of which will allow for high-quality sampling of material in several passes. And for particularly precise adjustment of the cutter height (error up to 0.1 mm), the design provides a micrometric adjustment knob.

Working with different types of wood

The model is equipped with a long rip fence, which is fixed with a screw on the router bed. Additionally, a cam stop and a centering pin can be installed, which will allow you to perform figure and circular milling. The soft start function ensures the start of work without jerking and, accordingly, damage to the working material. Depending on the type of wood and its density, you can adjust the rotation speed of the cutter using a 6-step regulator in the range from 11,000 to 28,000 rpm. It is worth noting that the model works exclusively with 6 and 8 mm collets.

Reliable chip protection

Two guides are covered in corrugated tubes that protect the device from chips. The design also includes a transparent protective “curtain”, which gives good review milling lines and at the same time protecting the eyes from sawdust. Additionally, the visibility of milling is improved by the backlight, which is constantly on throughout the entire operation of the router. The device comes with a pipe for connecting a dust collector, which will prevent sawdust from flying all over the workshop. A positive point is the presence of a convenient case for transporting the router, collets and spare attachments.

Execute precise milling operations impossible without the use of special equipment. Creating grooves, shaped edge stitching and forming blind holes at home and in small workshops are done using hand power tools. Depending on the power, the operator of such a plant can process wood and plastic workpieces or hard grades of metal alloys. The vertical device Bosch pof 1200 AE is positioned as universal tool. Its power is sufficient even for professional use, and its ergonomics meet the requirements for models for domestic use.

General information about the model

The machine is a mid-range milling unit that is suitable for a wide range of machining operations. First of all, the design is designed to work with wood, including hard rocks. In creating the milling cutter, German engineers implemented several proprietary technologies, including - electronic systems positioning, regulators and the ability to use a copying machine.

The basic model already has a wide range of accessories, including a centering rod, collet chucks, an open-end wrench, a suction adapter, etc. The design itself was focused on minimal effort on the part of the operator, which ensures high ergonomics of the Bosch pof 1200 router A.E. The price of the device is 5-6 thousand. Taking into account the power of 1200 W, the amount is more than attractive. You can also find milling cutter models on the market for 3-4 thousand with similar power potential, but they are unlikely to be able to provide the same level of functionality and reliability as Bosch.

Router characteristics

Typically, the technical and operational indicators of processing machines are determined by their power potential. It cannot be said that the Bosch pof 1200 AE router is a record holder in its segment in terms of workpiece processing capabilities different sizes, but it technical specifications, which are presented below, are quite suitable for performing most typical operations:

• Unit power - 1200 W.
• Working stroke - 55 mm.
• Engine operating frequency is range from 11,000 to 28,000 rpm.
• The standard size of the collet is 6-8 mm.
• The cutter diameter is maximum 8 mm.
• Tool weight - 3.4 kg.

With high power, the installation was deprived of some functional additions. For example, the creators excluded options such as soft start and the ability to maintain high speeds under constant load. This functionality, by the way, is present in most models of other Bosch power tools. But the ability to adjust the speed for specific tasks and the dust removal system remain.

Features of the Bosch pof 1200 AE model

The absence of the above-mentioned functional systems can be explained by the fact that the design of this milling cutter received many other additions, oriented specifically for the tasks of delicate and precise processing. For example, you can highlight the Bosch-SDS mechanism. This is the same copying installation, thanks to which the user can use the same parameters when working with several workpieces within one session. Special attention The designers paid attention to the means of centering and positioning. For this purpose, in particular, a system of guide columns with rubber inserts for protection. In addition, the Bosch pof 1200 AE router is equipped with a whole range of security systems. Here we can note overload protection, spindle locking, speed stabilization and a transparent casing that protects the user from chips.

Additional accessories and consumables

A necessary component for any device of this type is a cutter. This is the direct cutting element that forms the grooves and holes. Carbide cutters with a diameter of 6-8 mm are suitable for this model. It is important to consider their purpose. Models with different design parameters are available for edges and grooves. Also, the reliability of machining operations depends on the collet. This is the component through which the cutter is attached to the tool.

Manufacturer in recent years practices the use of quick-release chucks. Such mechanisms are widely used in construction electrical equipment, including milling equipment. Bosch pof 1200 AE, in turn, has an autonomous collet locking mechanism. This has its advantages, but in any case the operator will have to perform more manipulations to change the work element. Therefore, it is better to provide several collet adapters in advance, which will ensure safety during the work process.

Instructions for installing the cutter

The integration of the milling cutting element is carried out in several stages. First of all, you need to turn the chip guard and unlock the spindle. To insert a ready-to-use router into the collet, you need to loosen the fastening nut with a suitable wrench. This will allow the cutting element to be inserted to a sufficient depth. According to the instructions for Bosch pof 1200 AE, the minimum immersion of the shank into the collet niche should be 20 mm. Next, the fastening nut is tightened with the same wrench in the reverse position, and the chip protection returns to its place.

Operating instructions

Before starting to process the material, it is necessary to set the optimal number of revolutions. The setting regulator allows operation in six modes. Accordingly, the harder the workpiece, the higher the rotation speed should be. Direct milling is carried out in the direction opposite to the rotation of the cutter. The opposite direction is dangerous because the tool can jump out of the operator’s hands. The milling cutter plunges smoothly and without jerking. At the same time, stopping at one position is also undesirable, since there is a risk of displacement of the working element and expansion of the gripping zone - as a result, the workpiece may be damaged. After processing is completed, the Bosch pof 1200 AE vertical milling machine is placed in the upper position and the engine is turned off. If the device is not planned to be used for a long time, then it is better to disassemble it.

Router maintenance

Like other equipment that works with wood materials, this tool must be protected from excessive dusting of chips. Ventilation holes and crevices should be carefully inspected and cleaned after each working session. The same applies to metal, since accumulations of electrically conductive dust can be dangerous to the device’s engine. Actually, to prevent excessive contamination, you should connect a suction vacuum cleaner to the router every time. For this purpose, the Bosch pof 1200 AE model is equipped with a special pipe. As a preventative measure, it is also recommended to perform an audit once a month. element base, assessing the quality of fastening individual parts tools, insulation reliability and the state of the electrical base.

Security measures

Milling action can only be used when working with materials that do not have direct contact with electrical or gas lines. If there is a possibility of hidden routes, this should be checked using a special metal detector. It is also not recommended to use dull or deformed cutters. They can not only perform poor-quality processing, but also lead to the destruction of the fastening system. During the work process, the Bosch pof 1200 AE milling machine must be securely held in your hands. Although the device has a vibration and noise dampening system, under intense loads the level of vibrations may increase - you should be prepared for this.

Positive Feedback

The model is often used in household processing various materials. According to the owners, the unit is optimally suited for the implementation of complex grooves in wood preparations, as well as for some operations with aluminum. Although there are reviews that note the correction of locking mechanisms that use high-strength steel. This indicates the high power potential of the tool, which, of course, is a plus. Traditionally, the German instrument is praised for its high ergonomics. A stabilization system, a comfortable grip, and guide equipment - all this increases the comfort of working with the Bosch pof 1200 AE device.

• Model POF 1200 AE
• Article 060326A100
• Power, W 1200
• Weight, kg 3.4
• Speed ​​max, Rpm 28000
• Collet size max, mm 8
• Speed, rpm 11000-28000
• Soft start No
• Equipment: 1) Centering rod
• 2) Copy sleeve (Ø 17 mm)
• 3) Groove cutter (Ø 8 mm)
• 4) Three collet chuck
• 5) open-end wrench
• 6) Rip fence
• 7) Suction adapter

Description

Specifications:
Rated power consumption 1,200 W
Output power 650 W
Chuck (included) 6 mm
8 mm
1/4"
Idle speed 11,000 – 28,000 min-1
Max. milling basket stroke 55 mm
Weight 3.4 kg

Description:
Bosch POF 1200 AE is a high-performance and precise vertical milling machine. Powerful engine And high speed 11,000 – 28,000 min-1 allow this tool to demonstrate excellent performance even when processing hard wood. Special electronics allow you to select the optimal speed using an adjustment wheel. Locking switch continuous operation Built into the handle for convenient use. For simple and safe change of cutters, a spindle lock is provided. The SDS system allows you to quickly install the guide sleeve without using additional tools. The transparent casing protects against flying chips and does not interfere with control of the work process. The high-quality coated base plate ensures excellent gliding without damaging the material surface. Vertical milling machine The Bosch is easy to control with soft, comfortable handles.

Scope of delivery:
Centering rod (2 609 200 310)
Copy sleeve (2 609 200 138)
Groove cutter (Ø 8 mm) (2 608 628 381)
Collet chucks (3 pcs.)
Open-end wrench (1 609 203 V40)
Rip fence (1 609 203 M85)
Suction adapter (2 600 499 077)

Hello everyone. I would like to bring to your attention simplest option illumination of the working area for hand router Bosch POF 1200 AE. Its main advantage is its simplicity and the fact that the possibility of warranty repair of this instrument is not violated (no structural damage is required).

To begin with, not a big note on the router itself.

The Bosch POF 1200 AE milling cutter belongs to the class of personal (household) tools (green series of Bosch tools). For home use it is quite enough, even with a reserve. But unlike the professional (blue) series of Bosch tools, it uses cheaper, that is, lower-quality materials (accordingly, the price is several times lower). But there are unnecessary gadgets, such as a rotor lock button. This “convenience” can become a big problem in the future. Namely, in the case of souring of the thread or a little more force when tightening the clamping nut of the collet, the rotor rotates, as a result of which it will be practically impossible to fix the rotor and remove the cutter. You will either have to cut off the valve cover or almost completely disassemble the tool.

Note the damage to the valve. Since it is made of a rather soft metal.

Remake the valve to more high quality metal there is no point, then the rotor will deteriorate.
For this reason (on the advice of specialists from the service center), I recommend removing the cover with the latch immediately after purchasing the tool. You have to remove it very carefully because... the screws can (most often) be coated with locking agent threaded connections.

The screws are also made of rather soft metal; when unscrewing, you will most likely damage the caps. Just then buy 4 screws with M4 thread, for the RN2 bit, 18-20mm long because installation of this structure in place may be required if warranty repairs are necessary!
Now the cutter will be replaced like most professional tools, that is, using two keys (see photo).

This will require a second spanner by 11mm, which will have to be bored to 11.3-11.5mm or a small adjustable wrench.

The board is made of single-sided fiberglass, the insulating gasket is cut out of a DVD box or other suitable plastic exactly along the contour of the printed circuit board.

LEDs 4 pcs. (5mm white light, bright) are installed on the board at a distance of 4-5mm, to allow correction of the direction of the light flux. They will have to be slightly bent towards the rotor. Resistors 4 pcs. 0.25W 100Ohm was used (based on a 5V power supply). The connection of LEDs in conjunction with resistors is parallel. Resistors can always be recalculated, depending on the power supply available at hand.

When installed on a router between printed circuit board and an insulating gasket, washers with a 4mm hole made of insulating material 1-1.5mm thick are installed.

The board is secured with two M4 screws with a head for manual tightening (for convenience).

PCB dimensions.

(4mm holes)

Drawing of PCB tracks.

(Marked in Sprint-Layout 5)

The wire from the power supply is attached to the board using a thick thread, then coated with glue. The length of the wire should preferably match the length of the router wire.

The wire is fixed to the handle of the router using Velcro tape (for convenience).

Complete product set.