When I purchased my SUV, I discovered that there was a “dead” spare tire in the trunk (they forgot to tell me about it before purchasing). I didn't know what to do with it, so I left it lying in the trunk until one day it occurred to me interesting idea- make a barbecue out of it. I didn't know how to weld metal, so I had to develop creativity However, any components used for assembly had to be made to withstand heat (i.e. no nickel or galvanized coatings).
Here is a list of tools and materials that I personally used, but this project can easily be adapted to suit individual preferences. The base can be made from wooden pallet or other wood lumber, and if you have no desire to make it at all, then the grill can be filled with concrete, and the height can be adjusted using a piece of pipe of the required length. In general, there are many options.
Tools:

• Grinding machine.
• Miter saw.
• Electric drill.
• Planer (optional).

Material:

• Wheel rim
• High temperature paint – 2 cans
• Bars 100x100x2500mm
• M16 bolts – 4 pieces
• Set screw for wood M12 – 4 pieces
• Steel pipe diameter 48 mm – 450 mm long
• Threaded rods M12 – 2 pieces
• Grill grate (various sizes) – 1 or 2 pieces
• Wheels – 4 pieces

The hardest part of the job

Without a doubt, this is the most unpleasant part of the job - removing the rubber from the rim. After watching a few videos and trying to do everything by theory, I ended up just taking an electric hacksaw, cutting the bead of the tire, and then somehow removing it using a pin and a long screwdriver.
After freeing the wheel from the rubber, I took it to a local sandblaster, where they allowed me to process it myself. It took about 11 minutes in time and cost less than 600 rubles (800 rubles if the work is done by a master).

Details and painting

I purchased all the necessary components from a local hardware store. I bought the pipe and cut it there. The pipe flange, which will be installed on a wooden base, will not need to be modified, since here we will use set screws required diameter. But the flange that will attach the disk to the pipe should have holes slightly larger diameter(they will have to be drilled) so that bolts with a wider head will fit into it.
Next comes painting. Personally, I used a special high-temperature paint, Rustoleum High Heat. Application of the coating follows the same principle as with any other aerosol paint. I painted all the parts in two layers. I wrapped paper around the wheel bearings before painting to prevent them from getting clogged with enamel.

Preparing the foundation

The disk itself is quite heavy, so the base must also be quite massive. I wanted to make it the same weight as the disk, but I needed to keep it compact, so I decided to use 100x100mm bars. I cut them with a saw so that the base ended up square.
I then drilled holes on the ends of the bars using a guide wooden plate with pre-drilled grooves. Ideally I would like to use drilling machine so that the holes were exactly the same, but since I didn’t have one, I took a regular drill. I then pushed threaded rods through the holes and then sanded the finished base.
Then I put spacers on the threaded rods, screwed the washers on top and cut off all the excess with a grinder. After that I drilled (and sanded) holes for the set screws on the top and for the wheels on the bottom.
In the end, all that remains is to cover the base with impregnation and a layer of protective varnish.

Connecting the disk, pipe and base

To attach the pipe flange to the disk, I used bolts with a smooth head (as wide a diameter as possible). You need to make sure that the bolt heads touch the central rim of the disk. This mount may seem rather weak, but once I tightened the nuts, it became clear that there was no play in the design. I closed the hole in the pipe with a special sized plug to prevent ash from getting inside. I also treated the plug with high-temperature paint.
The pipe is screwed into the flange at one end, and into the base flange at the other. The base flange is secured with bolts and washers. I also covered them with paint.

Final chords

I used the valve hole on the disk to attach the hook in it, and then attached a carabiner to it - you can hang various auxiliary tools on it (tweezers, brush, spatula).
Finding gratings of the right size turned out to be problematic, but I searched the Internet and found the right options. One grille should be small enough to fit inside and hold charcoal, and the other is wide enough to fit on top and hold food. In principle, one grate may be enough, since the coal can be placed directly on the metal of the disk (only if it is stainless steel or regular steel, and not zinc or galvanized metal), but I thought that the coals could fall out through the holes at the bottom and damage the wooden base.

Conclusion

I liked both the functionality and appearance the resulting grill. As someone who has not yet learned how to weld metal (but would very much like to), I strived to create enough reliable design using improvised means, and I think I succeeded. Also, if you remove the wheels and turn the grill upside down, you can get a pretty stylish table.
I hope you enjoyed my tutorial and find it useful!

Self-assembly of a barbecue from car wheel rims is a very cheap way to purchase a useful and functional item needed for garden plot. It's no secret that in summer season Residents of megacities vacationing outside the city find themselves in an environment devoid of their usual comfort. Instead of convenient stoves and multicookers, you have to adapt to electric stoves with 1-2 burners. In the event of a sudden power outage in a holiday village, a primitive period begins. The problem of the inconvenience of cooking over a fire can be solved with the help of an ingenious device developed by folk craftsmen.

It is very easy for car owners to get 1-2 rims. While these parts don't get replaced as often as tires or tubes, you can still find some barbecue material lying around in your garage. Unnecessary wheel rims are thrown into landfills or handed over to scrap metal collection points. A lightweight structure on a metal site can be purchased for a purely symbolic amount.

In addition to the disks themselves, you will need:

For coloring portable version You also need to choose heat-resistant paint. Painting will give the structure an aesthetic appearance and protect it from exposure to precipitation when stored outdoors.

The easiest way to make a grill from rims— place the spare part with the open side up. The standard holes in the cap will serve as a grate for the fuel placed inside. This design can be supplemented with handles and taken with you on picnics: it is lightweight and takes up virtually no space in the trunk, but can reliably prevent forest fires by preventing coals from scattering and limiting the fire to the diameter of the rim. Here is a video instruction on how to quickly do this and what you need to pay attention to when working:

How to make a Finnish hearth from car rims?

A distinctive feature of this type of stove is open hearth, installed in the center of the table. It doesn't take a lot of time or materials to make it. A round metal firebox can be successfully replaced with a wheel rim raised to the desired height. The base for it can be made of stone, cinder block or bricks, not forgetting to leave free space for air flow into the firebox.

Place the disk from the machine on the prepared base and cover it around the circumference with wild stones or bricks, leaving no big hole for blowing. The height of the masonry should be such as to completely hide the base and the metal hearth. You can improve the design a little by welding a pin with a hook on the side for hanging a kettle or pot.

You need to lay a tabletop on the resulting low column with a recess on top round shape. It could be a dream big tree, a specially made slab from artificial stone, a sheet of thick metal or other available item. There should be a hole in the center of the tabletop, the diameter of which corresponds to the size of the wheel rim.

This barbecue made from car wheels is stationary. You can arrange circular seating around it. To protect from rain, it is best to erect a light canopy, and if desired, the master can build a warm gazebo.

Portable barbecue of complex design made from car disks

A metal barbecue made from car wheels, made by a craftsman with imagination, can serve as a source of pride for him. Despite the simplicity of its design, such an oven is a multifunctional device: it is both a grill or barbecue and convenient stand for a cauldron, and decoration of a recreation area in the garden. In the photo you can see the design of the miracle stove forged elements, and the fire-breathing Darth Vader.

Such a fireplace is not very heavy, so it can be installed in any convenient place on the site or take it with you into nature. A special feature of the design is the use of 2 identical disks from the wheels of a passenger car. The material must first be prepared for work: cut out or cut out the middle of one of them so that only the rim remains.

Install the disks from the car in this order:

• place the whole one at the bottom, placing it with the cap down;
• Place the one from which the central part was removed on top.

The upper part of the structure must be positioned so that the rib remaining after removing the hood is located on top, creating a partial overlap of the furnace roof. It is on this that you can lay a grill grate or place a cauldron and a kettle. The sides from the top of the rim will hold the cauldron in the desired position.

Weld the upper and lower parts of the grill along the circumference. So that when using the product you do not have to remove the dishes placed above the fire each time, you need to cut out a door in the side of the oven. Mark and cut out a rectangle convenient size in such a way that there is a threshold about 10 cm high above the grate (the bottom of the firebox). This will allow the coals not to fall out when the door is opened.
Other hole parameters can be arbitrary. In principle, everything can be seen in the photos provided.

The cut piece must be equipped with loops on one side and a latch on the opposite side. For these purposes, you can use ordinary metal fittings (latches, hooks, door hinges etc.). Small parts can be attached using a welding machine or bolts and nuts.

In order to raise the barbecue to a height convenient for cooking, you need to weld 3-4 legs from the bottom from sections of angle or corrugated pipe. It is most convenient to place these parts inside the rim, the slope of the walls of which will give the structure grace and stability, ensuring the divergence of the lower part of the supports. If desired, the master can solve the problem in another way, by welding a single leg in the center of the structure and complementing it with a wide and heavy base.

Here's another idea on how you can do everything without welding:

After burning off the remains old paint and applying a heat-resistant coating, the barbecue can be considered ready for use. If desired, you can supplement the design with supports for placing skewers over the neck of the grill, handles for easy carrying and other necessary little things.

Self-made hearths different types will simplify the cooking process open fire. Each option can become the heart of a friendly company both in nature, in the garden, and in the gazebo. Relatively safe design portable models requires their installation on non-combustible materials if the floor in the recreation area is wooden. Especially for this purpose, you can lay out the fireplace area with bricks or paving slabs.

An old car disk, if desired - the opportunity to make a small barbecue for the garden. And by placing a grate on it, you can cook not only kebabs, but also use it as a grill.

Let's consider with different sides idea for a barbecue made from car disks.

The advantages of this idea:

• Thrift price;
• Takes up little space;
• Very easy work;
• Multifunctionality;
• Possibility to do it yourself.

Flaws:

• Few skewers fit;
• Round shape of the roasting pan.

Materials and tools

To make a grill from car rims you will need:

• Iron disc from a passenger car or small truck, maximum large diameter(R15-16');
• Profile pipe 20x20 or 25x25 mm;
• Wire 6-10 mm;
• Thermal paint for barbecues (in an aerosol can - very convenient);
• Lattice.

Tool:

• Welding machine;
• Grinder with cutting and grinding wheels, as well as a brush;
• Drill and drill bits.

How to do

We will consider a basic option that can be supplemented or reworked at your discretion.

Clean the car disk from rust and old paint. Doing this first will make the job easier.

1. There are many holes in the disc and some, if not most, will be too large. At this step, large holes are welded with scraps to avoid spillage of coal. Try to use metal 3-4 mm thick. There is no need to completely seal the bottom of the roasting pan. Leave holes for air.
2. The disk, if left as is, turns out to be a low barbecue. You need to weld 3 legs. Typically, pipe sections are welded directly to the disk. But if you have plans to transport this grill, then the legs need to be removable. To do this, pipe sections plugged on one side are welded to the wheel disk. larger size(the legs will be inserted into them, so make sure they fit together).
3. To prevent the legs from sinking into loose soil from below, weld the nickels.
4. The disk is round, and this is inconvenient for skewers. The simplest solution is to weld two parallel pieces of pipe to fit the size of the skewer.
5. For ease of carrying, weld a couple of wire handles.
6. We recommend cutting the roasting rack to fit the roasting pan.
7. It's time to bring the disc grill to a decent appearance. Clean all elements down to metal using a grinder. Apply thermal paint. It is best if the paint is in aerosol cans. This is the final stage.

It will take a day to make a barbecue from a wheel rim. and it turns out almost for nothing. Its quality and appearance depend on your efforts.

Made barbecue, oven, barbecue. a smokehouse made from car disks is an example of how waste materials can be reused for a useful and necessary design. These wheel rims are quite simple to make; you can make them yourself in the garage or in a home workshop. Although the design is simple, this product can be used for many tasks.

How to make a grill from rims

For self-assembly For this design of car disks, we think in advance what the layout of our product will be. Let's prepare consumables in the required quantity, as well as a list of tools. To do a quality job, you need to be able to use a grinder to cut metal and a welding machine.

A simple option - a grill for skewers

More complex grill models with grill grates

How does a barbecue oven work:
Below we put firewood or cooked coals. A grill is placed on top or skewers are placed. We can also place the dishes on the wire rack or directly on the wheel, if the size is suitable. Thanks to the heat that rises, you can cook food in the same way as a regular barbecue. If we want to smoke food, then we close the exit at the top, make sure that the wood chips smolder - smoke should form. In each case it is thought out custom design, depending on the needs of the owners. However, when assembling the device, the basic design principle is the same, regardless of the model.

Smoking chamber made from car wheels

A barbecue made from disks will be more profitable if it is adapted for various tasks. For those who prefer homemade balyk and sausages, we recommend a smokehouse, which will serve as a device made of disks. Such useful thing made using a minimum of two units of material.

The work is based on the principle in which two disks are connected to form a solid hollow structure. Upper part is modified to make it convenient to fry kebabs - as in the previous model. However, to preserve the smoke, you should install a lid and a smoke exhaust system. The partition with holes can be left, which will be easier. In this case, the device can act as a hob.

To secure the door, we weld a nut onto it so that they are symmetrical with respect to the weld seam. One bolt at a time is also fixed to the grill by welding in such a way that the door nuts are placed on them. After this, the grill is ready! Now you can enjoy the cooking process and the dishes themselves.

Ideas on how to create a grill, barbecue, oven with your own hands from car wheels

Possibility to adjust the height of the cauldron on the stand above the disk.

Grill grate with forging elements

disc grill on legs.

Brazier from a wheel disk and a spit.

Hanging original grill.

The wheel rim for the barbecue was taken from a truck.

Step-by-step instructions for making a barbecue for a cauldron from car wheels

Almost every person loves meat cooked over a fire or pilaf made in a cauldron. For barbecue and similar dishes you need a grill, which is not cheap. But any man, if desired, can build it himself from car rims and save a lot of money family budget. You don’t have to be a jack of all trades; it’s enough to know how to use a welding machine and a grinder. How to make a grill from car rims is described in the article.

Car rims photo

Car owners rarely throw away car rims, so they often lie idle in the garage for years. Even if they were thrown out or taken to a metal collection point, you can buy old wheels for pennies at the nearest service station.

Some craftsmen use metal barrels with ordinary walls, but their thickness cannot withstand high temperature, and holes are burned on the surface. You can also make a stove from steel sheet purchased at a hardware store. Such a grill will be durable, but expensive. Discs from under cars are best material for making a stove for a cauldron. They are cheap, durable, and easy to get.

What types of barbecues are there? You can make several types of fireplaces from disks with your own hands:

Advantages and disadvantages

Pros:

Cons:

• If the barbecue made from wheel rims is made without a stand, then its height may not be enough for full-fledged work. Due to poor draft, the fire goes out.
• Small firebox.

Required materials and tools

There are small criteria for choosing car wheels. Best option for the barbecue it’s a wheel from under a truck. It is made of thick steel that will last from 20 to 40 years. Hearth from car disk won't be as reliable.

You will need:

• rim;
• an iron brush to clean the wheel from rust;
• file;
• Bulgarian;
• welding machine;
• drill;
• several bolts;
• a nozzle for cutting metal;
• steel rod or profile tube.

  Are you interested in the method of making a barbecue from car rims?

  YesNo

Several manufacturing methods step by step

The easiest model to make is a single hearth made from a wheel disk with your own hands. The design is made of one wheel with a stand.

Algorithm of actions:

1. Cut out the inner wall, making the wheel resemble a barrel.
2. If there are holes in the workpiece, seal them. Take the washers, cover the holes with them and weld them.
3. Close the layer, but do not forget to leave holes through which the coals will be blown.
4. Weld 4 legs to the bottom of the disk.
5. Clean all seams and sand the cuts.
6. Cut out small window so that you have the opportunity to observe the fire and clean the firebox.
7. Weld the handles so that the grill can be moved from place to place.

DIY wheel rim grill photo

How to make a double grill from stamped disks with your own hands?

1. Pick two rims. Choose the size based on the dimensions of the cauldron - 15 or 13.
2. Take one disk and mark a line around the circle where you will make the cut. Draw from above the holes.
3. Cut out the drawn circle with a welding machine. The cut off part can be used as a lid. It can also act as a stand for a cauldron.
4. Prepare welding machine. Take the second disk and weld a large hole in the center using a previously prepared piece of metal.
5. Place one disk on the second and weld them to each other.
6. If the seam turns out rough after welding, it can be corrected using a Bulgarian saw. Grind down and cut off any protruding bumps.
7. Draw the outlines of the future door that will open the firebox. Cut it along the marked line, leaving a fourth side.
8. Doors need a hinge. It can be built with one bolt. Take the bolt, cut off the top and find two nuts that fit.
9. Weld the first nut to the door, the second to the grill.
10. Screw the bolt into the threads of one and the second nut. If you wish, you can make several loops.
11. Make a handle for the door. Find any nice piece of metal and weld it.
12. Also, do not forget to make handles for the entire structure to make it easier to transport and move.
13. To ensure that the smoke leaves the firebox evenly, make several straight holes according to the diameter of the structure.

Grill legs

Prepare legs for the structure to make it stable. If you are making a barbecue for a summer house, then simply weld them to the product. But if you need a collapsible mechanism, then the stand can be made removable.

1. Prepare several profile sections that will become grooves for the legs (3 or 4). They should be larger in size. Weld them to the main structure at equal distances from each other. The angle of inclination must be the same.
2. Cut several equal legs from a metal rectangular profile.
3. Check how the pieces are inserted into the grooves. If they are difficult to insert, sharpen the edges with a Bulgarian saw, and then hammer them into the fasteners. The stove for the cauldron is ready with your own hands.

How to weld legs from car rims to a grill

Attention! The best length for legs is 45-50 cm.

Another variation homemade stove- This smokehouse. To assemble the structure you will need two rims. How to make a stove from rims?

Algorithm of actions:

1. Place the two bases next to each other.
2. Do not cut the center section out of the top wheel. It will serve as a lid, contain smoke, and become an exhaust system. This is a ready-made stand for a cauldron made from car wheels.
3. Cut the base from the bottom disc and weld the two pieces together to make one piece.
4. Attach the legs using welding.
5. Mark the door in the center of the grill and cut it out. Make a loop according to the method described above.

Decorating the barbecue

To make the product look nice, it needs to be painted. Get rid of old paint by burning the entire structure. Clean off any remaining coating sandpaper or sandpaper. Next, take heat-resistant paint and paint the grill in any color. Black looks the best.

When doing work, follow safety precautions. Do not neglect protective equipment: goggles, mask, special gloves. When you do work Bulgarian saw, guide the disc to form a right angle with the object. If this rule is not followed, then fragments may break off from the disk and injure you.

Photos of finished homemade barbecues: