Over time, any wooden furniture begins to emit various sounds, which the owners fight with all available and known methods. It’s especially annoying when the bed you have to sleep on every night starts making sounds. A creaking bed can deprive healthy sleep, spoil the quality of sex with your loved one and, with your loud sounds, disturb the sleep of household members even in the next room. How to rid yourself of this minor but unpleasant problem? The very first step is to find out what is causing the bed to squeak.

Causes of squeaking

A wooden bed may begin to creak due to the natural drying of the material or the simple loosening of fasteners. To find out the real reason, first you need to remove the mattress, throw it on the floor and check it for “creakyness”. Perhaps the bed has nothing to do with the sound. If you find out for sure that the bed is creaking, you will have to crawl thoroughly on it to determine the exact source of the emanating sounds. These could be old legs, boards under the mattress, places where elements meet. After the creaking place is found, we will try to get rid of the squeaks.

It's not the bed that's creaking, it's the springs.

How to eliminate squeaking

The easiest way is to tighten better all the screws, screws and nuts with which your bed is assembled. In more serious cases, you can additionally secure the joints with metal corners with inside, and coat all joints with wood glue. You should not use the bed until the glue has completely dried.

If there is nothing to tighten, you can try to lubricate all the joints of the elements with some kind of lubricant. It could be silicone grease, soap, baby powder, candle paraffin, grease. When lubricating, extreme care must be taken to avoid damaging appearance wooden furniture. After lubrication, friction disappears, therefore, the squeak disappears.

Another way to solve the problem when the bed creaks is to replace or rearrange the slats that support it. They bear the main load and often quickly become unusable.

Eliminating a squeak is quite easy, the main thing is to find its source

In some cases, the only thing possible way To get rid of annoying sounds, you can simply saw off the legs of the bed. This method is especially relevant if the furniture is not made from solid pieces of wood, but from chipboards that cannot be repaired. Then the bed turns into a stylish floor bed, which, however, is not suitable for every owner.

Any material changes its shape and characteristics over time, and accordingly, defects may appear in coatings and objects made from it. The bed creaks - how to eliminate this unpleasant, ear-piercing sound? This phenomenon brings a lot of inconvenience to household members, due to the fact that it is impossible to turn around at night without disturbing someone’s sleep. When finances do not allow you to update sleeping place, the question arises of what to do to remove these unpleasant sounds.

Determine the cause of the squeak:

• The first step is to remove the mattress with orthopedic bases from the bed structure and place them on the floor.

Important! An orthopedic base is a special base made of wooden planks - it is located under the mattress.

• Check if the mattress is squeaking. You need to make sure that this mattress is not a source of unpleasant squeaking before you move on to checking the frame of the sleeping place itself. You need to get on the mattress and move around a little. If creaking is heard, then it is caused by the mattress.
• Check the orthopedic base for squeaks. You need to press on it from above and try to shake it. If you hear a squeaking sound, most likely it is this that is causing all the problems.
• Shake the legs of the structure and listen carefully. An unpleasant sound often appears where the butt joints between the legs and the rest of the frame are located.

Important! You must try to find the exact place where the creaking comes from.

• Rock the support strips from below on the inside of the structure frame. Support strips are usually made of wood or metal. They are always located at a certain distance from each other and stretch from one side of the frame to the second. An orthopedic base with a mattress is later laid on the slats. You need to press down on each support bar to see if they make an annoying sound.

Important! Very often, the cause of a squeak is caused by the friction of one wooden part against another.

Eliminating squeaking

So, now you can answer the question of what to do if the bed creaks. To save your sleeping place from creaking, you need to follow this algorithm:

1. Take it all necessary tools for further work with the part of the bed that turned out to be faulty. You need to look at exactly how the butt joint of the bed frame is arranged, and at the place where the sound comes from. If in your case the fastening is with screws, you need to take a screwdriver of the right size. If it is bolted, arm yourself with a wrench.
2. Tighten the butt joint that is making the noise. Often the main cause of bed squeaking is weak fastenings in the butt joints. Before disassembling the frame, you need to tighten the screws and bolts in those places where the unpleasant sound is coming from.
3. Use a washer if there is any difficulty with the bolt not being fully tightened.
4. Completely disassemble the butt joint if the bed still creaks. Use your tool kit to unscrew and remove any bolts or screws that hold the parts together. They put the removed ones in a separate place so as not to accidentally lose them. Separate the frame parts that are included in the problematic butt joint.
5. Lubricate all butt joint elements. Apply lubricant to the surfaces of the two butt joint parts touching each other. The following will be listed best views lubricants for this purpose:
   • Paraffin is a waxy substance that comes in the form of bars. They are easy to rub on the parts you need.
   • WD-40 is an aerosol lubricant suitable for use on beds that have metal frame. The only downside is that it can dry out over time.
   • To remove bed squeaks, you can use candle wax. They need to rub the parts being processed.
   • Silicone grease. You can purchase it at a hardware store, and then use it to treat all problematic elements of the butt joint - this way you will get rid of squeaking for a long time.
6. Reassemble the bed frame. Return to their places all the parts that were unscrewed, tighten all the bolts and screws.

Important! You need to make sure that all fasteners are tightened tightly to prevent them from making more noise later.

1. Check to see if the squeaking has stopped. Try rocking your sleeping area to see if any annoying sounds remain.

We fix problems quickly

Creaks wooden bed— what to do if you cannot repair it yourself? Below will be written a few useful tips to solve this problem:

1. Pad the frame support strips with unnecessary clothing. The fabric will prevent the orthopedic base or mattress from creating friction with the bed frame.
2. Use cork sealant to fill excess gaps in wood frame bed frames.
3. Place a towel or other fabric under the uneven legs of the bed to prevent it from rocking and making unnecessary sounds.
4. Place a book under the mattress near the source of the squeak. If the irritating sound comes from the support bars, you need to remove the mattress with an orthopedic base from the sleeping place, and then place the book on the creaking bar. After this, you need to return the orthopedic base and mattress to their place.

Any furniture wears out and becomes unusable. A wooden bed is no exception, even if it is made of high quality materials. After some time, you may notice that the bed is creaking, what should you do in this case to eliminate the unpleasant sound? First you need to establish the cause of the squeak, and only then take action.

You can get rid of the creaking of a wooden bed if you accurately determine the cause of its occurrence. The most common among them are:

• Fasteners, connecting elements– over time they can become loose and break;
• Slatted bed base - the structure creaks due to contact wooden parts or breakdown of fasteners;
• Mattress – it is not the mattress itself that makes the sound, but its springs. Under weight, they bend and deform, which leads to their contact. A mattress can also make unpleasant sounds due to friction against the frame or base. Often this happens because it simply lies unevenly;
• Legs – if the bed is not level, an unpleasant sound may appear when they touch the floor. The furniture shrinks and gaps form. The legs begin to come into contact with the frame, making an unpleasant sound.

Check the slats

Checking the legs

Secure all fasteners properly

Check the mattress

How to detect the source without dismantling the bed

It will be much easier to determine why the bed creaks if two people look for the cause at once. One of them will loosen the furniture, and the other will listen. The cause of the creaking, as has already been found out, can be different elements of furniture, therefore, in order not to completely disassemble the structure, you can resort to some of the methods described below. The bed creaks - what to do:

1. First, remove the mattress. Take out the base. It consists of slats located across the bed under the mattress;
2. Place the mattress on the floor and check. The cause of the squeaking is the springs located inside. Stand on the mattress, walk around it, sit down. If there is no creaking sound, then the problem is different;
3. The mattress sometimes rubs against the bed itself, coming into contact with the walls of the frame. Put it back and check. Stagger or sit down, a creaking should appear;
4. Press on the orthopedic base and pump slightly. The source may be wooden slats, incorrectly fastened or if cracks or chips have formed on them. Often, in inexpensive bed models, the self-tapping screws or screws used to attach the slats to the base cause squeaking;
5. Sometimes the reason is not in the foundation, but in the frame. Then you need to carefully check the entire bed. Shake it in different areas. It is possible that the entire structure has become loose and additional fasteners will be required to enhance the strength of the frame;
6. Beds with a lift mechanism can also squeak. An unpleasant sound appears in the mechanism itself. Repairing it is quite complicated, so it is recommended to replace it;
7. The legs also sometimes make an unpleasant sound. It appears due to their contact with the floor when the bed is uneven. This can mainly be determined by looking at the legs of the bed. Most likely, some of them will not reach the floor. In this case, you can put special stands under them. It is also common that the legs do not fully contact the bed frame, they rotate and creak;
8. Check the support bars. They are necessary for installing an orthopedic base and mattress. They are attached to the base and are made of wood or metal. You need to press on the slats and listen to see if a creak appears or not.

Check if the floor is squeaking. There are cases when the sleeping place is located on a wooden floor. Over time, the boards begin to creak and the sound seems to be coming from the bed. The sleeping place must be moved away and checked whether unpleasant sounds are heard in another place.

Remove the mattress

Press down on the mattress

Check the slats

Check lifting mechanism

Eliminating squeaks

When a wooden bed creaks, it can cause many inconveniences. During sleep or rest, unpleasant sounds and friction irritate and worsen your mood. It’s unlikely that anyone will like squeaky beds. Determining the exact source of the sound will help you choose a method to eliminate the problem, making sleep and relaxation pleasant and comfortable.

1. You need to take a pillow or other thing and place it in the space between the headboard and the wall. The creaking due to the movable headboard will stop, since it will be fixed in one position;
2. The second option is to press the bed on both sides with other furniture. For example, a chest of drawers, a nightstand, an ottoman. In this case, the loosened bed will stand firmly and not wobble.

If the simplest methods for eliminating squeaking do not work, you need to approach solving the problem more specifically. You need to get rid of squeaks depending on the parts of the bed. The mattress, headboard, frame and base can creak.

Place pillows behind the headboard

mattress

Sometimes the mattress just lies unevenly on the bed, try to place it correctly. The reason also depends on the type of mattress. Their filling can be polymer or spring. Inexpensive models make squeaking noises due to the contact of springs. Only replacing the mattress will help get rid of the problem.

Expensive models are designed in such a way that each spring is located separately in a case, which performs a protective moisture-repellent function and prevents friction of the springs. If an expensive mattress squeaks, it is recommended to turn it over. The load on worn areas will be less, and the creaking will stop for a while.

Mattresses with polymer filling also make unpleasant sounds. They may be associated with a violation of the tightness of individual chambers. Air flows from one chamber to another and produces a characteristic sound. If the polymer mattress begins to creak, it must be replaced.

Adjust the mattress

Turn over the mattress

Headboards

The headboard can also cause a wooden bed to squeak. The most common is loosening of the drawer. The creaking appears in the places where they connect to the headboard. It is recommended to tighten all bolts and all connecting elements.

If simply tightening does not help, you will need felt, felt or rubber pads. For greater reliability they are glued. In this case, it is necessary to take into account the fact that it will become more difficult to disassemble the bed.

Change gaskets

Frame

A wooden bed usually creaks after several years of use. This is due to the fact that there is dry air in the house or apartment. It causes the tree to dry out. Individual elements dry out and small gaps appear between them. Thus, the parts begin to move and touch. They wear out and the gaps increase. The creaking gets louder.

Most easy way Eliminating the unpleasant sound of a bed frame means tightening all the fasteners. This method temporary, since after a certain period of time the parts will become loose again. In this case, it is recommended to immediately strengthen the frame and prevent the appearance of squeaks.

Small gaps can be eliminated using a special lubricant. They reduce wear and friction of parts. It is recommended to lubricate the bed with anti-friction agents. They happen different types: paste, aerosols, gels, sprays. How to get rid of bed squeaks at home? To do this, you will need a regular paraffin candle or a piece of soap. Parts that rub against each other must be carefully treated with a candle. This must be done until they begin to slide evenly and smoothly. This product brings only a temporary effect, so the lubricant is repeated periodically. A simple bar of soap can also help get rid of squeaks. Wooden elements are rubbed with soap in the same way as with paraffin. It is worth noting that this method is not moisture resistant.

If the gaps are large and the above methods do not help, it is recommended to use additional gaskets. They come from rubber, felt and other materials. Install gaskets in the gaps and additionally glue them.

Using furniture corners, you can increase the strength of the frame structure. In this case, the bed will not wobble or squeak. In some cases, you will need carpentry or PVA glue:

1. The frame is dismantled;
2. Carefully remove dust and dirt;
3. Degrease the surfaces of individual parts;
4. Apply glue to joints and holes;
5. Connect the parts to each other, assemble the frame;
6. Leave the bed until the glue has completely dried.

We disassemble furniture

Remove dust and degrease the coating

Apply glue

Assembling the bed

Reasons

How to prevent the base of the bed from creaking? In some cases, replacement helps wooden slats in some places. Orthopedic base takes on the full brunt of the load, over time it becomes unusable and wears out. What to do in such cases:

1. First, carefully inspect the slats. Cracks and chips may appear on them. Also, the slats could become deformed over time, and damaged parts will have to be replaced;
2. The sleeping place creaks due to broken lath holders. They are also replaced with new ones;
3. In some cases, you just need to tighten the fasteners, and the squeak will disappear;
4. After this, each part is checked by gently pressing on it. The elements that make squeaking are freed from their fastenings and the ends are lubricated. Silicone grease is suitable for this;
5. For large gaps, felt or polyethylene foam will help;
6. Cheap bed models do not have lath holders and the slats are held on with self-tapping screws. Under them you need to put any soft cloth which will eliminate friction.

Sometimes a wooden or metal frame creaks. It may rub against the support bars. Felt pads that are fixed to the frame will help get rid of squeaking. You can also attach them to support strips.

Checking the plate holder

Lubricate squeaky elements with oil

We check every lamella

Preventive measures

What to do to prevent it from squeaking new bed? A fairly common problem, the following recommendations will help you get rid of it. Preference should be given to beds made from expensive natural wood. The most durable and durable:

• Oak is practical and durable, with a beautiful pattern, it is suitable for any interior;
• mahogany – noble color, original appearance and high quality. Products made from mahogany are moisture resistant and not affected by ultraviolet rays. The furniture emits an unobtrusive aroma that repels various insects;
• rosewood - luxury furnishings are quite expensive. The products have exclusive qualities. By rubbing the wood a little, you can feel the delicate aroma of violet. High-quality pieces of furniture will delight the owners for a long time.

Pay attention to the frame - the elements must be firmly attached and should not dangle. It is better to choose a mattress with separate blocks. They are stronger and more durable. Over time, it must be turned over so that the load is evenly distributed over its surface.

When installing your new bed, try to position it as level as possible. An uneven load on the bed frame and base will subsequently lead to loosening and distortion of parts, and as a result, creaking. All fasteners must be tightly tightened so that the bed forms a solid structure. Metal products will be more durable. Another plus is their cost. Metal beds are cheaper than wooden ones. They also look beautiful and will suit almost any setting. Forged beds do not creak, they look stylish and elegant.

All wooden beds begin to creak during use. You can get rid of the annoying sound at home, the main thing is to correctly determine the cause and choose the appropriate solution.

Video

The eventful day is over, and you can finally get some sleep. But the insidious bed suddenly begins to make nasty creaking sounds. It seems like a small thing, but it’s unpleasant; the problem needs to be solved somehow. Buying a new bed is not always an option, and it can also creak. So, what to do if your bed squeaks?

Creaking occurs when two parts of a product come into contact; as a rule, this occurs when connections become loose, or due to deformation of the material. Poor assembly results in a completely new bed starting to creak, although this rarely happens. Much more often, creaking does not appear immediately, but over time, when the fasteners weaken during operation, and the wood or chipboard changes in size due to unstable climatic conditions. A spring mattress can also creak when it wears out.

If a wooden bed creaks

The creaking of a wooden bed is primarily due to the characteristics of the material. Wood reacts to changes in air humidity in the room. It gets damp when high humidity in the absence of heating and dries out in winter period when the air is very dry. As a result of such changes wooden elements beds often become deformed and begin to “walk” relative to each other, even by one millimeter free space between the elements is enough for a creak to appear. How more difference in humidity in different times years, the higher the likelihood of squeaks occurring in the near future.

You need to try to find the exact location of the creaking. Start with the mattress, to do this, remove it from the bed onto the floor, crawl on it and listen, if it makes squeaking sounds, then buy a new one. Otherwise, continue searching. Check all fastening connections - this is the most common reason bed creaks. Tighten the screws properly. If you cannot fix it securely, secure this connection point metal corner or a staple. You can try to lubricate the joints of the elements with silicone, paraffin, or, in extreme cases, soap. Lubrication removes friction, which means there is some creaking time will be lost. When enough long distance Place a piece of felt or felt between the rubbing parts.

The most the right way To eliminate squeaking, gluing the joints with some kind of elastic glue, for example rubber, is considered. It is important to remember to degrease the joints before gluing so that the glue sets well and this work is not in vain. Of course, after such a repair it will no longer be possible to disassemble the bed into parts. But there is a great guarantee of getting rid of nasty sounds.

If you find that the slats are creaking, then proceed as follows. Lubricate the lamella with paraffin or wax candle. Or pull out the lamella, wrap it with a strip of fabric and insert it back. It happens that it helps to simply swap the slats. It is the lamellas that bear the main load, and over time, cracks may even appear on them. Therefore, if the creaking does not disappear, replace the lamella that has become unusable.

Another radical way To combat the creaking of the lamellas, replace them with two sheets of plywood and carefully screw them to the frame.

Most difficult case- a creaking sound that comes from loose bed legs. Repairing old ones or installing new legs is a very difficult process. Often furniture repair specialists offer to cut down the legs of the bed. For the same reason, many furniture factories They stopped making beds with legs.

Bed with lifting mechanism

In a bed with a lifting mechanism, the base to which the mattress is attached most often creaks. In this case, you should contact the company that manufactured this bed and replace the base. But the lifting mechanism itself can also make a creaking noise. It is recommended to lubricate it with silicone. And tighten all mounting screws.

Eliminating the creaking of a metal bed

Metal squeaks are especially unpleasant. Tighten the fasteners, lubricate the joints of the parts. Some models have front and side walls connected by Click-Clack mechanisms, which quickly become loose and begin to creak. It is better to replace them with ordinary bolts and nuts.

If you find touching surfaces on a metal base that make a creaking sound, cover them with tape.

When a worn armored mesh creaks, it is easier to replace it with any other base. You can treat the springs with WD-40, but this is painstaking work, the results of which will not last as long as you would like.

Air bed creaking

Unfortunately, many air beds squeak a lot. Sound is generated by the contact of rubber surfaces. And it is unlikely that it will be possible to completely get rid of this phenomenon, but it can be weakened. To do this, place the air bed on the carpet, cover the mattress with a woolen blanket, and then cover it with a sheet.

Basically, beds begin to make an unpleasant squeaking sound when friction occurs between 2 surfaces.

A squeaking sound in a bed occurs when friction occurs between two surfaces.

At first glance, it may seem that removing the squeak is easy; there is nothing to rub in the bed.

In reality, almost anything can creak. Most often, beds are made of chipboard or wood. The parts are fastened with special fasteners, or self-tapping screws are used for this purpose. The design of such fasteners does not exclude slight movement of parts relative to each other. In addition, materials tend to deform and change in size over time. In this regard, it is very difficult to combine the parts so that there is no relative displacement and it is possible to get rid of the creaking of the bed.

Often the problem occurs in the place where the leg is attached to the side. IN in this case The main fasteners are a bolt and a nut, but you should not over-tighten the connection; you may damage the leg or side. And if the tightening is weak, due to the elasticity of the wood, slippage occurs, causing creaking. Moreover, in such a situation, a constant weakening of the connection occurs. There is no point in tightening the nut; in this case, the recess will be pressed down even more. This applies equally to both wood and chipboard.

Main options

It should be noted right away that when buying a standard bed, the question always arises of how to get rid of squeaking. But making a bed yourself is not suitable for everyone, so you can still take certain actions to eliminate unpleasant sounds. First of all, you need to glue the joints and joints. For this purpose, you can use rubber glue. According to experts, in such a situation, rubber glue has undeniable advantages. It should be taken into account that any creaking area is characterized by the presence of a strong load and some deformations. Basically, all adhesives form strong seams, but they are still not resistant to deformation.

As for rubber glue, its use produces an elastic seam, which is ideal for this task. First of all, when using rubber glue, a rubber film is formed on the surface to be glued. Even if there is an air bubble and the surfaces mutually shift, there will be no squeaking. Indeed, in this case, surfaces coated with a rubber film will come into contact with each other.

Return to contents

Squeak elimination technique

To eliminate the squeak, you will have to disassemble the bed. The first stage of work is to degrease the joints of the parts. After this, each bonded surface is processed thin layer glue. After this, let the surface dry slightly. After this, the glue-coated surfaces need to be aligned and pulled together in the same way as was done before. Now you need to leave the bed and not use it until you are sure that the glue has dried.

Check the quality of the screws that connect the wooden furniture elements. If necessary, all connections can be strengthened from the inside using steel corners. To process wooden parts at the joints, you can use not only rubber glue, but also graphite lubricant, or use a special spray based on silicone.

In addition, to determine the cause of the squeak, inspect the boards on which the mattress is located. They often sway and become deformed, causing unpleasant sounds. In this case, they can be turned over, and if the desired results are not achieved, then replaced. And finally, it is not the wooden parts of the bed that can make a squeak, but the springs of the mattress. In this case, there is nothing you can do to fix it and you will have to buy a new mattress.