The loud clap of a toilet lid is a fairly common phenomenon, creating not only some discomfort, but also shortening the service life of plumbing fixtures. Sanitaryware only looks durable and indestructible. Ceramic products can withstand up to 500 kilograms, but they are not designed for shock loads.

To solve these problems, plumbing manufacturers equip their products with lids with a microlift. This non-removable device, which ensures smooth closing of the seat, sometimes fails. But it’s possible to repair a toilet lid with a microlift yourself.

Microlift device

To repair a toilet lid microlift, you need to know what this device is and familiarize yourself with the principle of operation.

In fact, the microlift is a closer and professional language called Soft Close, which means smooth closing. The device performs 3 useful functions at once:

• eliminates noise when closing the toilet lid;
• prevents damage to plumbing;
• prevents the spread of unpleasant odors throughout the apartment.

The design of the mechanism is quite simple. The microlift consists of elements:

1. Spring - the degree of compression corresponds to the mass of the toilet lid.
2. Hinges – provide free movement.
3. Rod – sets the lid in motion.
4. Bolts – secure the mechanism to the seat cover.

The operating principle of a microlift is similar to that of a door closer: after lifting the seat cover, it smoothly lowers under its own weight. Thanks to this, the entire mass of the element does not fall onto the surface of the toilet, which eliminates the appearance of cracks on the ceramic surface.

The design of the toilet lid closer does not contain complex elements, but the mechanism may fail.

Self-repair is only relevant for simple designs. There are automatic models of microlifts on the market, equipped with motion sensors. Such products not only lower, but also raise the lid when a person approaches. Repairing such Soft Close systems cannot be done with your own hands: it requires certain knowledge, so it is better to contact a service center.

Installation features

Installing seat covers with a microlift is not difficult: the installation scheme is similar to standard products. Before installing the structure with a closer, you need to remove the old seat and seat install new. Fastening is carried out with bolts that fit into basic equipment. The main thing is not to forget to supplement the bolts with rubber washers so that plastic cover softly adhered to ceramic surfaces.

The only difference is that Soft Close may require additional adjustment. This is done in situations where, after installation, the seat is noticeably skewed. Such moments are unacceptable and can lead to premature failure of the product.

The operation of the mechanism is adjusted until the fastening bolts are fully tightened. For this purpose, special adjustment cups are provided, which are rotated until the position of the lid is completely aligned. Problems with adjustment usually do not arise, and the sequence of actions is described in detail in the instructions.

Causes of breakdowns

In most cases, soft-close toilet seats do not require repair. The cover is made of duroplast - a material of increased strength, resistant to mechanical damage and dynamic loads. The closer is a non-removable structure, so repairing the toilet lid microlift with your own hands is impossible in principle: there is no access to the internal mechanisms.

This is not considered a design flaw of the microlift. All internal elements are made from quality materials, designed for a long service life. Manufacturers fill out interior space silicone to reduce friction and increase the working life of parts.

Preventive measures do not exclude physical wear of the mechanism, but the actual service life of the closer usually exceeds the period declared by the manufacturer. Therefore, the main cause of breakdown is careless operation of the product. For example, a person out of habit tries to forcefully close the lid. This should not be done: the spring is designed to gradually lower, and such rough interference with the planned work disables the mechanism.

The breakdown can be determined by the knocking sound that appears when the lid is lowered. This indicates that the degree of compression of the spring has changed and the microlift at least needs adjustment.

Closer

If the breakdown is internal, then no way, because the microlift is a monolithic structure. A cracked rod or burst spring becomes critical damage that requires replacing the seat completely.

Service center specialists can restore the operation of the door closer system, but in some cases the cost of repairs may exceed the price of the device, so it will be easier to buy a new product.

Replacing fasteners

Mounting bolts are usually made of soft material(brass alloy or plastic), so they may burst if moved carelessly. The problem is quite common.

You can replace the bolts yourself. The work is performed in the following sequence:

1. Shut off the water and remove it cistern– this action is not necessary, but it can simplify access to the fastening system.
2. The lid is removed - the nuts located at the bottom of the toilet are unscrewed, and the bolts are pulled out of the grooves.
3. The installation is carried out - damaged bolts are replaced with new ones, the system is assembled in the reverse order.

The fragility of ceramics must be taken into account, so fasteners are installed only through plastic or rubberized washers, tightening is carried out without excessive force.

Lifting supports

The structure is fixed metal supports. To do this you need to remove protective caps installed on each rack. On most models, special holes for a hex key are provided for such operations. After this, the seat and the lid rise up.

The fasteners inside the system rotate freely, so they are twisted forward or backward, aligning the lid with the toilet tank. When the adjustment is completed, the caps are returned to their places and carefully tightened.

Other faults

Considering the features of the microlift, not all faults can be repaired. For example, when the lid is forced down, the spring often breaks or is pulled out. The non-demountable design will not allow you to replace this element. The situation with the stock looks similar. If you are lucky, you can choose a mechanism with a working piston and then the closer will last for some time. However, you shouldn’t count on such luck, so if the piston is damaged, you have to replace the cover completely.

A separate situation is when the lid itself breaks. The causes of such damage are usually a strong impact or a point load on the surface, for example, when a person stands on the cover with his feet. Feasibility of carrying out self-repair determined by the nature of the damage.

If the lid has split into several fragments, there is no point in trying to restore it. It will not be possible to assemble the product qualitatively, and a hastily glued surface will damage the overall design bathroom. In situations where a crack appears on the lid, the visual defect can be corrected with liquid nails. Adhesive composition applied to the surface, the edges are joined together and fixed for several minutes.

In some cases, the cause of incorrect operation of the microlift is an excessive amount of lubricant. Silicone appears on the surface and prevents the lid from lowering correctly. This problem can be solved by using a cloth to remove any leaking grease.

Sometimes the opposite situation occurs, when a lack of lubricating substance leads to jamming of the mechanism. Symptoms of a malfunction are extraneous noises and creaking noises accompanying the process of raising/lowering the lid. The problem is solved by carrying out maintenance.

Replacing a damaged cover

Before replacing the cover, you need to select a new model with a closer. When choosing, 3 main factors are taken into account:

1. External parameters of the toilet.
2. Shape and design features plumbers.
3. Manufacturing company: it is better to give preference to products from well-known brands.

For the microlift to work correctly, the model you like must fit the toilet. If this rule is not followed, it will be necessary to replace it again after some time.

From a technological point of view, replacing the cover will not be difficult. Fastening is carried out with two bolts that need to be unscrewed. If the thread is covered with rust, it is pre-treated with silicone. Sometimes this action does not help, and then the fasteners are carefully cut off with a hacksaw.

After this, the mounting holes are cleaned of dirt, and new model, which is attached with bolts from the installation kit. If necessary, the microlift is adjusted.

The device ensures smooth lowering of the toilet lid. It is not only convenient, but also practical. First, no loud noises when closing the lid or lowering the bezel. Household members can sleep peacefully! Secondly, there is no risk of chipping due to the toilet seat hitting the bowl. Thirdly, it is hygienic. Simply push the rim and it will begin to fall, without having to hold it.

A microlift for a toilet has not been a new product for a long time. You can meet it in many houses. Another question: is the mechanism still working for everyone? And then it turns out that for some the device quite soon lost the soft close function (“smooth lowering”) and is used in manual mode. Let's figure out why this happens and whether you can solve the problem yourself.

Causes of failure

When choosing between products made of plastic or duroplast, you should give preference to the latter. This headband is scratch-resistant and will last much longer than a plastic one.

When installing a structure with a microlift, it is important to follow all the manufacturer’s instructions. It is necessary to carefully adjust the position of the rim and cover to avoid distortions.

Lowering the rim of the toilet or closing the lid is an action so familiar and practiced that we never think about how exactly we do it. With a microlift, you have to act differently - almost with one touch. We pushed and waited. It is this “otherwise” that is the main reason for the mechanism to break down. The fact is that the microlift cannot be rushed, but many people, out of habit, press on the rim. Thus, the mechanism quickly fails.

In addition, the microlift can break down for reasons beyond the control of the users. Sometimes the lubricant inside the mechanism becomes unusable. It may delaminate or lose viscosity. It happens that the composition is distributed unevenly among the parts, and then problems begin. A creaking sound during operation indicates that it is time to lubricate the mechanism.

If a gap is found between the base with the closer and the bowl shelf, most likely it is a broken fastener. In this case, the bolts must be replaced.

Another reason why the microlift stops working is worn out parts. But this, of course, takes time.

If the seat is equipped with additional functions, such as heating, repairs to the microlift should be especially careful so as not to damage the systems. In some cases, it is reasonable to turn to professionals.

How to fix a microlift

Unfortunately, it is not always possible to repair a broken mechanism. The fact is that there are two types of microlift devices.

The first consists of a rod for fixation, a spring that ensures balancing of the structure, and a hinged micro-lift mechanism, which ensures the movement of the elements.

In the second, instead of springs and rods, pistons and cylinders are installed. The device is not dismountable, although there are craftsmen who repair such structures.

If the spring is broken or the rod has become unusable, it will not be possible to repair the microlift. In this case, you will have to replace the entire mechanism.

• Text: Natalia Stepanova

The functionality of plumbing fixtures is constantly growing. Another new product is of interest - a toilet lid with a microlift.

At first glance it seems that this is not so important detail plumbing fixture. But sometimes it is not always possible to hold the lid when lowering it, causing it to fall down, causing irritation. In this case, the plastic may crack or scratches may remain on the surface of the toilet. In such a situation, a lid with a microlift helps.

How does a microlift work?

The new device operates by smoothly and slowly lowering the lid onto the rim. As a result, loud sounds from impact do not occur and the surface of the device is not damaged. Ceramics always require careful handling, since it is impossible to restore it to its previous state.

The microlift operates on the principle of a door closer, only smaller in size. The mechanism consists only of a spring with a rod and hinges. It is calculated according to the weight of the lid in order to smoothly brake it when lowering. This function is performed by a spring. The rod serves to hold the cover and fix it in the lower and upper positions.

The structure cannot be disassembled. When reassembled, it will no longer work as before.

The lid is lifted manually. To lower it, it should be given a slight push, after which it begins to move down independently under the action of a spring.

An expensive toilet lid with a microlift contains a motion sensor, based on a signal from which it rises when a person enters the toilet, and lowers it when leaving.

Advantages

Not everyone knows the advantages of sitting with a microlift, which are as follows:

• ease of installation;
• silent lowering;
• automation in expensive models;
• Can be used for any toilet:
• Protects the ceramic rim from cracks and scratches.

Microlift makes it possible long time maintain the aesthetic appearance of the toilet. Modern models they are no longer released without it, since it is an indicator of prestige.

Which toilet seat should I buy?

When choosing lids for a toilet with a microlift, price matters, but you should still purchase models from well-known manufacturers. When you buy an expensive product from a well-established manufacturer in a specialized store, you receive a guarantee of quality, and sometimes even the opportunity to replace an item damaged during use at a service center. Prices for microlift lids of European quality start from $100 and above, and elite models start from $1000.

Preference should be given to American or European companies producing plumbing fixtures that have long mastered its production and have proven themselves well. In addition, they have a greater variety of shapes, sizes and colors, which makes it possible to choose a suitable design for the interior of the bathroom.

You should choose a seat with a microlift taking into account the following features:

• there is no need to buy cheap products, but it is better to opt for the middle price range;
• the model must match the interior of the bathroom;
• attention should be paid to the material of the product;
• the device must be practical, convenient and fit the size of the toilet;
• before purchasing, you need to collect all possible information about the product;
• Models may have additional functions: heated seats, automatic lifting of the lid upon a human signal, etc.

Material

The most common toilet lid with a microlift is made of duroplast, which is distinguished by its great strength and resistance to mechanical damage. The material lasts a long time, is resistant to aggressive chemical environments, is easy to clean, maintaining its original color. Products from the Roca Dama Senso brand (Spain) are distinguished by high quality hard plastic. Duroplast lids are often found in public toilets, but you can also use them at home.

Wooden lids are also often used, but they require special care.

On some models, the toilet lid mount can be easily removed for cleaning. They can be recognized by their Quick Release function.

Toilet lid with microlift: repair

The durability of a lid with a microlift largely depends on proper operation. If you lower it sharply, the mechanism will quickly fail. A light push is enough to activate the device. Adults quickly master the rules of using a microlift, but children do not always succeed. The spring of the mechanism is not designed for sudden compression. It can withstand a certain number of cycles of lowering the lid, but may lose its properties in one go. Sharp mechanical impacts lead to breakdowns that cannot be corrected.

The reason for rapid wear of the microlift mechanism may be wrong choice models, as well as errors during installation and operation. When purchasing a lid with a microlift, you need to consider the following:

• compliance with the shape of the toilet and the method of fastening;
• choose products from trusted manufacturers;
• rely on your own experience.

Externally, the lowering mechanism looks simple. But you shouldn't take it apart. The adjustment is made by a spring, which is balanced by the weight of the lid.

Removing the cover

A sign that the mechanism is broken is when the lid drops and hits the rim of the toilet. The easiest way is to replace the cover. To do this you will need a tool:

• suitable socket wrench;
• pliers;
• hacksaw for metal.

With prolonged use, the fastening thread becomes dirty and it is difficult to unscrew the fastening. It is clamped with pliers and the bolt is turned with a wrench. If it does not give in, it is cut with a hacksaw.

Installation of a new seat

The new lid is easily installed by inserting the fasteners into the grooves of the toilet.

Then the bolts are tightened. The threads should be pre-lubricated with silicone so that they can be unscrewed later. Before the final tightening of the bolts, the structure is leveled, and its fit to the toilet rim and height are also adjusted. When installing, be sure to read the instructions, which describe each operation in detail. Some products have lids equipped with special hinges and can be easily removed. The durability of the device depends on the correct adjustment of the seat.

It is especially important to pay close attention to the procedure for installing a cover with a microlift when the device has several functions. If used incorrectly, it can be easily damaged.

After dismantling the device, the microlifts are disassembled on the right and left sides. If they include cylinders with pistons, the lubrication inside should be checked. If it accumulates in one place of the cylinder, it is distributed evenly over the entire surface and, if necessary, added to the required amount or replaced completely. If there is a lack of lubrication or a change in its structure, the lid begins to creak when opening or closing. It is also important to use the correct lubricant composition here.

It is difficult for the average user to find a microlift for the toilet lid separately on sale.

Repair components have service centers where you should contact for help. It doesn't hurt to ask about the cost of repairs. If it is of the same order as the cost of the product, it is better to purchase a new cover.

Manufacturers

The most famous manufacturers of sanitary products, including toilets with seats on microlifts, are European companies. The Spanish company Roca produces lids with pneumatic microlifts Roca Dama Senso. They are made of stainless steel and are reliable and durable. They combine functionality with different styles at the buyer's choice. The strict shapes of the models are suitable for both floor-standing and wall-hung toilets.

A joint venture, Santek, has been created in Russia to produce these products. Spanish products have higher quality materials, but domestic ones are not much inferior to them at affordable prices.

Products high quality produced by GUstavsberg (Sweden) and Orsa (Italy). They can be purchased at average prices, but there are also expensive models premium.

Nano-coated, manufactured by the Chinese company Portu. The products are varied color solutions and new styles.

Conclusion

The toilet lid with microlift is available complete with all toilets. well-known manufacturers plumbing, since it is an indicator of the prestige of the product. It should be handled with care, since the non-removable structure is generally not subject to repair.

Microlift is a very useful and convenient device. When equipped with a toilet lid, the device prevents it from loudly falling onto the bowl or hitting the tank when lifted sharply. Like any other mechanism, such a door closer can break. This material tells you how to repair a microlift for a toilet lid with your own hands.

The main advantages of a toilet closer:

• it lowers and raises the structure smoothly and silently;
• increases the service life of the plumbing fixture, because it prevents the appearance of microcracks and chips on it due to strong regular impacts;
• extends the life of the seat itself (plastic is quite fragile and cracks due to impact loads);
• elite microlift models function automatically, thanks to tracking sensors (they raise the lid when a user appears in the bathroom and lower it when the person leaves).

Important! The disadvantage of the device is that the structure cannot be quickly lowered manually. If you press hard on it, the device will break. You need to monitor the efforts made, because repairing a toilet lid microlift is not easy, and sometimes impossible.

Door closer design

The design of the toilet microlift is very simple. It is almost identical to the design of furniture and door closers. The difference lies in the small size.

The toilet microlift consists of the following parts:

• a rod on which a plastic body is rigidly fixed;
• an adjusted spring (its force exactly corresponds to the mass of the structure and is at the equilibrium point);
• hinged device;
• bolts that secure the closer to the lid and seat.

Smooth raising and lowering of the structure occurs using hinges and springs. Most often, microlifts for toilet seats are made of duroplast. This composite material has a number of advantages:

• durability and strength;
• environmental friendliness (meets all hygienic standards);
• color stability (the material does not darken, does not turn yellow, spots and stains do not appear on it);
• resistance to mechanical stress;
• antiseptic properties (the material contains silver ions);
• ease of care.

Inside the door closer shock absorber is filled silicone grease. Thanks to her, adaptation to correct installation and use can work for more than 10 years. That is, during this time, repairs to the toilet lid with a microlift will not be required.

According to the method of fastening, there are two types of door closers:

• the first one is rigidly fixed to the plumbing fixture, so it cannot be disassembled for repairs;
• the second one is removable and can be repaired.

Important! The device should be used very carefully. If you press the cap too hard, the stem may break. In this case, repairing the toilet lid lift will not be possible. At the same time, closers cannot be purchased separately, but only with a new cover.

How to repair a toilet lid microlift?

When the toilet lid closes jerkily or simply falls with a loud noise, it means that the closer has broken down. If the plumbing fixture is equipped with a non-separable version of this device, it will not be possible to repair it.

The same applies to rod and spring breakage. Then the situation can be corrected only by changing the seat to a new design.

How to change the seat?

To replace a broken product with a new one, prepare pliers, a socket wrench and a hacksaw:

• when the device is used for a long time, the bolts “stick” (that is, they become covered with rust, and their threads become clogged), so lubricate them with technical oil, this will make it easier to unscrew the fasteners;
• you need to clamp the bolts with pliers and unscrew them (when the fasteners do not want to unscrew, you can cut them off with a hacksaw);
• then place the new seat, aligning it with the grooves on the bowl shelf, and insert the bolts into them;
• then move the seat forward a little and tighten the nuts.

Replacing failed bolts

To repair a toilet lid, you must first determine what exactly the problem is. The most common cause of breakdown is the lag of the base with the closer from the bowl shelf. At the same time, she begins to turn. This problem occurs due to broken fasteners. In this case, repairing the toilet lid microlift involves replacing the bolts:

• you need to dismantle the device by unscrewing or cutting off the fasteners holding the mechanism on the lid and seat;
• replace broken bolts connecting back side lids with a lift, onto new fasteners, and screw them on the reverse side with nuts;
• put the entire structure back together;
• screw the nuts from the bottom of the shelf onto the bolts (if they are plastic, you need to do this carefully without damaging them).

Important! If fastening is carried out with metal bolts, intermediate washers made of rubber or plastic should be used. They will soften the pressing pressure on the structural elements and thereby prevent damage to the base.

Tightening loose mounting supports

Often the fastenings of the structure become loose, causing the seat to begin to move in different directions.

The lift is secured to the back of the seat and bowl shelf with two plastic, steel or brass bolts. From the bottom they are pressed with nuts. To tighten the supports securing the seat to the toilet, remove the decorative caps on their legs. In some cases they have hexagonal holes, sometimes the covers are made monolithic.

To disassemble the structure, on the left leg of the fastener the cap for its installation is turned to the right side, on the right side - to the left. Next, you need to remove the cover along with the seat. For this purpose, they must be carefully lifted upward in the open state.

Below them is a second set of caps. Once you remove them, the screws will be visible. You should tighten them using Phillips screwdriver. After that, put everything back together.

Troubleshooting other problems

When the lid creaks for a long time when lifting and lowering, it means it’s time to lubricate the elevator. This can be done using silicone or another gel-like composition.

The opposite situation may arise when the cause of problems is excessive accumulation of thickened lubricant on the rubbing elements of the device. Then it is necessary to carefully remove the viscous substance, and then uniformly and thin layer distribute a new portion of lubricant throughout the elevator.

Sometimes, for various reasons, the toilet lid itself may burst or crack. In this case, the plastic can be glued together. This is done using construction adhesive, for example, “ liquid nails" When a plastic seat breaks, it can be glued together using acetone or dichloroethane. You need to drip a little compound onto the broken area and connect the cracked edges. Hold them in this position for 5–7 minutes and then release them.

Conclusion

Repairing a toilet lid with a microlift is not difficult. In cases where this is possible (if the structure is collapsible), the device can be repaired on our own. If the spring or rod of the device is broken, you will not have to repair, but completely replace the cover.

From the author: Hello, dear friends! Progress does not stand still, and nowadays even such simple thing, like a toilet lid, has many additional functions. It can be equipped with a built-in bidet, lighting, audio system and so on. And we are already so accustomed to comfort that as soon as one of these functions fails, we immediately become uncomfortable.

Luckily, you can fix some of them yourself and quite quickly. Today, for example, we are talking about how to make a microlift for repairs with your own hands. The functionality of this equipment may seem insignificant, but this is only until a breakdown occurs.

Features of the microlift

A microlift is equipment that allows you to control the lowering of the lid so that it does not fall too sharply. The fact is that the toilet, despite all its apparent strength, is often made of ceramics. And she is under strong physical impact may crack and split.

Of course, if the lid is made of lightweight plastic, then even if it falls hard, it will not harm the bowl in any way. But it may well crack itself. In addition, even lightweight material makes a loud sound when dropped, which is especially unpleasant in the silence of the night.

However, the functionality of the microlift is not limited to this. It all depends on the specific cover model. In some varieties, microlifts are equipped additional element, due to which the lid independently rises and falls when a person appears and leaves. In general, the result is maximum comfort.

At the same time, installation of even the most “sophisticated” model is quite easy. And the lid is no less easy to remove, which greatly simplifies the care of both it and the toilet. The only drawback is that the microlift takes full control of the raising and lowering procedure. That is, you cannot put pressure on such a lid with your hands in order to close it quickly - in this case the mechanism will simply break.

Troubleshooting

If after a long period of use the lid with the microlift breaks, then, of course, you want to have it repaired as quickly as possible. However, the point is not only the desire to quickly find the usual level of comfort, but also the fact that if you stay in a broken state for a long time, the microlift can completely fail, and then it will no longer be possible to repair it.

But before you start repairing the mechanism, it would be nice to find out what this equipment actually is. So let's first understand its design. It consists of the following elements:

• a rod that acts as a fastener for the lid;
• weak spring, with which plastic construction is balanced;
• the microlift mechanism itself, which is a hinged structure;
• toilet lid and seat.

The main elements responsible for the operation of the system are micro-lift equipment and a spring. Accordingly, problems usually occur with them.

The most common failure is the detachment and rotation of the base with the elevator. This mechanism is located on the back of the seat, fixed to it with two bolts made of plastic. Actually, the fasteners are usually the problem.

Plastic is a fairly brittle material, so it's only a matter of time before these bolts break. Of course, in such a situation they must be replaced and the elevator mechanism must be re-secured in its intended place.

Also, the spring is not immune to problems. It can either break or weaken over time, as a result of which it ceases to cope with its functions. It also cannot be repaired; it can only be replaced with a new one.

The same applies to the stock. Strictly speaking, in case of breakdown individual element It’s really easier to replace it with a new one, since even if repaired it won’t last long. And the components from such products are usually inexpensive.

However, several types of problems can still be fixed. For example, if the lid begins to squeak mournfully when raising and lowering, this means that the mechanism has run out of lubricants. In this case, you just need to make up for their deficiency.

You can also correct some of the consequences of mechanical damage yourself. Most often, such incidents occur with the toilet lid. If, for example, someone carelessly managed to sit on it in the dark, then it could crack.

Of course, it’s a shame to have to change the entire structure because of one crack, especially if it belongs to a fairly high price segment. Therefore, you can try to fix it yourself.

If the cracked lid is made of plastic, then drop acetone or dichloroethane onto the damaged area along the entire length. Then hold it for several minutes so that the edges of the crack meet tightly. After this, the damage will be repaired. If the product is made of a different material, then use liquid nails for repairs.

Replacing the cover

A microlift is a rather delicate device, and repairing it yourself is usually impossible, except for the above cases. Therefore, in the event of a breakdown, it is most often necessary to either call professional technicians or simply replace the entire cover.

Just last operation you can easily do it yourself, since this equipment is installed in exactly the same way as regular equipment, which does not have additional functions.

The main thing you should pay attention to is choosing a new cover. It must strictly correspond to the dimensions of the toilet and the shape of its bowl. Often, breakdowns occur precisely because the lid used simply does not fit the size of the product.

In addition to the overall dimensions, the distance between the holes on the toilet, which are used for attaching equipment, is also important. There are also fasteners on the roof itself, and it is necessary that they be able to fit into the appropriate places. Otherwise, the installation simply will not work.

The choice of manufacturer should also be taken responsibly. Of course, it’s always nice to buy a product from the lowest price category, while saving a considerable amount. But how long will this savings last, given the procedure for regularly replacing low-quality equipment? It is usually better to spend more significantly, but once, while avoiding the hassle of endless breakdowns and repairs.

Well, we sorted out the lid. In addition to this, to replace it you will need pliers, a hacksaw and a socket wrench, as well as a waterproof silicone sealant- our true friend in almost any work with plumbing equipment. Let's get to work.

1. Remove the old cover. To do this, you need to unscrew the bolts holding it to the toilet. If they are made of metal, then it is likely that rust will hold them firmly in place. Then you will need it special remedy, which freezes her. It can be purchased at any relevant store. After spraying the product on the rusted elements, wait a few minutes and then finally remove them. If the bolts are plastic, but also stubbornly do not want to leave their homes, then simply cut them out with a very heated knife. The toilet will not be damaged by this, then just clean the melted plastic off it.
2. We install fasteners in the vacated holes.
3. IN bottom part new cover we install the included rubber liner, which is responsible for the soft contact of the product with other elements.
4. Using fastening bolts, we fix the new lid on the toilet.
5. We make adjustments. This is especially important since a poorly adjusted cap will quickly fail. It should stand straight and firmly.

Dear friends, now you know how you can replace the microlift cover, and you can also fix minor problems if they arise. Share our article with your friends on social networks so that you all have the opportunity to promptly restore the level of comfort that has already become familiar. Good luck!