Download printed letters of the Russian alphabet for printing. Russian alphabet - aesthetics in every letter

Many well-known practical teachers, such as Zaitsev, Doman, recommend starting to study letters and the alphabet with your child from 1.5 to 2 years old. To help you, we offer cards prepared by us with large large Russian letters. You can print the Russian alphabet, print it out, cut it out and use it as a tool for learning sounds and syllables.

Currently, there are many methods for teaching a child to read. But without knowing the letters of the alphabet, it is naturally impossible to teach a child to read. Using available material, in the form of cards with letters for children, will come in handy.

How to start learning letters with your child

First, you can print out alphabet cards for children in one copy. This will be enough to learn just the letters.

Children aged 1.5 -2 years should be dealt with exclusively in game form, a few minutes a day. With children aged 3 - 4 years, the lesson time increases to 15 minutes a day.

If you decide to make the letters of the alphabet yourself and teach your child yourself, then do not load your child with letters alone. A child needs variety; you can literally spend a couple of minutes paying attention to the colors and shapes of objects. Then the child will be more interested.

And most importantly, there is no need to grieve if the child does not immediately begin to “declare poetry” to you. Even if over the course of several lessons he seems to you to understand nothing and refuses to tell you letters and numbers, this is not at all true. The child simply remembers everything, analyzes it, time will pass, and you will be simply amazed by his abilities. Your job is to continue learning diligently.

When the child masters the letters, you can print out the Russian alphabet in one more or even in 2 copies. Then you can study syllables with your child and form small words.

Read more on our website in the section education and training .

Cards with letters of the Russian alphabet

Cards with letters of the Russian alphabet, printable Russian alphabet

How to write letters beautifully to design a poster or stand.

From this article you will learn how to make a beautiful inscription for the design of a poster, stand, birthday or any other holiday.

Beautiful Russian letters printed in a beautiful font for design: letter templates, print and cut

You can organize a holiday without thematic inscriptions, but if you are preparing a stand or poster, then photographs or pictures alone will not be enough: after all, you need, at a minimum, to write a congratulation. You can’t do without text when decorating a holiday. Unusual and original letter templates are also useful in the advertising industry, as decorations that complement the theme of the event.

You can’t do without text when decorating a holiday.

In order not to look for templates every time before the next event or event, you can find suitable stencils and cut them out on thick cardboard. Such blanks are suitable for repeated use.
You will only need to attach the stencil to the place allocated for the inscription on the poster or wall and carefully apply thin layer paints. The letters must be filled in so that the paint does not leak under the stencil.
You can have a great time with your child while preparing for the holiday. The very process of writing a text will interest the baby, a joint activity will contribute to the development of memory, awaken creative activity. Also, thanks to cutting out letters, the child will develop initial knowledge of the alphabet.

How to write a beautiful inscription

You can cut the letters along the contour with scissors. But it's more convenient to do this stationery knife.
Beautiful letters are painted directly onto a concrete or asphalt surface.
On wooden surface, metal, graphic elements can also be applied to bricks.
Knowing the technology of applying letters to a surface, you can independently make an inscription for any production facility or advertise your service sector.
Letters written according to a pre-prepared template look neat and clear, and it’s easy to fantasize and select various options you can endlessly write text.

Knowing the technology of applying letters to a surface, you can make any inscription yourself

Options for beautiful block letters:

Beautiful printed font option No. 1

Option of beautiful block letters No. 3

Option of beautiful block letters No. 4

Beautiful Russian capital letters for design: letter templates, print and cut out

If you need to make an inscription in capital letters, then look for suitable option in this section.

Beautiful Russian capital letters for design: option No. 1

Beautiful Russian capital letters for design: option No. 2

: letter templates, print and cut

In this section you will find a selection of beautiful Russian letters for decorating a New Year's event.

Beautiful Russian New Year letters for decoration

Beautiful New Year's inscription for decoration

Beautiful Russian New Year letters for decoration

To ensure that the inscription itself does not commemorate the frosty, clear days of winter, it is worth looking for appropriate letter templates to decorate the holiday. To make your search easier, we have collected them in this section.

Beautiful Russian capital letters for design: letter templates, print and cut out

In art schools and other specialized educational institutions For years they have been teaching how to create inscriptions and place texts correctly on a poster. Therefore, all the nuances of writing letters cannot be revealed in one article. We won't even try. After all, now there are a lot of ways to bypass the process of writing text: letters and entire inscriptions can be printed on a printer, redrawn from a finished poster or cover onto tracing paper, and then transferred to a poster or other surface.
If necessary, you can simply paste the text printed on a black and white or color printer. But if you have time, you can experiment with colors, textures and apply paint in some unusual way.

What tools do you need to write beautiful text?

Beautiful Russian capital letters for design

Beautiful Russian letters with monograms for decoration: letter templates, print and cut out

Get started by creating a sketch. You will reduce the time spent on creating a poster or inscription for an event if you write the text in a small format, displaying maximum quantity details.
While preparing the sketch, you should have a clear idea of what your inscription should look like in the end. Finish execution can begin only after preliminary sketches. The decision about the location of the text also needs to be made at the sketching stage.
When starting to write text, you should adhere to a simple and simple rule: all characters must have the same width. Also, the inscription should consist of the same combination of thin and wide lines. Do not write overlapping graphic elements or signs different heights, different lengths or width. Between letters, no matter what format you create them in, the same distance should be maintained.
If the above requirements seem too complicated for you, then write the letters without complicating them with different additional elements. Take your time, because this activity is only for the patient.
If you are not sure that you will be able to write a beautiful inscription on a large-format canvas, then use a stencil for the work. Now there are many sites where you can find stencils for printing, made in various styles.
But if you find it difficult to draw using a stencil, then choose a suitable font and print the letters on your computer. Next, you will need to carefully cut out the letters and place them on the poster, gluing them bottom part. such an inscription will also look good.

Beautiful Russian letters with monograms for decoration

Beautiful Russian letters with monograms

Beautiful Russian letters for decoration: letter templates, print and cut out

If you need to design a poster in a humorous way, with cheerful notes, then look at the letter templates presented in this section.

Beautiful Russian fairy letters for design: letter templates, print and cut out

For registration children's party In fairy tale themes, special templates are suitable. All you need to do is find the ones that suit you from this section and print them.

Beautiful children's cartoon Russian letters for decoration: letter templates, print and cut out

A children's event can be decorated with original cartoon letters. Where can I find them? In this section!

Beautiful large Russian letters for design: letter templates, print and cut out

Whatever font you choose for the design of your stand or poster, the letters should remain readable. Otherwise, the beauty you create will turn the text into a puzzle. When creating an inscription, you can, of course, be guided by your taste or idea of the design of the future text, but frills will only complicate the text, and not make it more beautiful.

When using computer program or ready-made templates, you should not count on the special “beauty” of the inscription or its uniqueness. This is explained simply: the creators of such templates do not bother searching for information about a well-created font.
For example, you can click on one of the template links and see the letters in the presented font different widths. Letters can be created in violation of all requirements. One font can have rounded, wide letters and elongated ones, some may have protruding ends.
If you think this type of font is beautiful, then use it to design a poster. However, you should not expect that everyone will like the result.

Here's an example of a readable, simple font:

Beautiful Russian three-dimensional letters for design: letter templates, print and cut out

Beautiful multi-colored Russian letters for design: letter templates, print and cut out

Beautiful multi-colored Russian letters for decoration

Beautiful multi-colored Russian letters for decoration

Beautiful Russian letters with flowers for decoration: letter templates, print and cut out

How to beautifully write letters for the design of a poster, stand, holiday: samples of letters for writing

When creating text, follow the following sequence:

What you will need to create beautiful letters on a large format poster or sheet of whatman paper:
fountain pen for ink and ink

set of tips for fountain pen(tips of different thicknesses)
wide markers (special, for glossy surfaces)
paint for these markers (specialty stores sell paint with various tints, for example, metallic)
If you don’t have a fountain pen, you can use felt-tip pens, colored pencils, gouache or watercolor

If you don’t have a fountain pen, you can use felt-tip pens, colored pencils, gouache or watercolors

To write vertical dashes and lines, you can use a narrow tip; for the side parts of letters, use a wide tip. With this method of writing, letters acquire volume.

If you decide to use markers or colored pencils, start by outlining the letters. This is done with a simple pencil. The outline is then outlined with a felt-tip pen, and only then the letter is painted over with paints or pencils.
To prevent the inscription from looking boring, you can add shadows behind the letters. This will create the illusion of a wall behind the 3D letters, which will cast a shadow. Letters drawn in 3D also gain additional volume.

Technical part: recommendations

we decide where the inscription will be located
Without pressing hard on a simple pencil, we make a horizontal line on the sheet (there should be no traces left after using the eraser): we apply alternating stripes according to the height of the font and the line spacing
if you decide to make an inclined inscription, then immediately prepare an inclined line like a school copybook, but place the lines less frequently
after drawing the auxiliary lines, we begin to write the letters with a simple pencil, maintaining maximum accuracy in reproducing the configuration and adhering to the width of the letters of the selected font
mistakes made when writing letters are corrected immediately with an eraser
We outline the finished inscription with a pen, felt-tip pen or marker
do not erase draft and auxiliary lines (they can be removed only after the main inscription has completely dried)

How to apply text using carbon paper?

Print out your favorite template
Place carbon paper on a sheet of Whatman paper
Place the original text on top and trace it with a pen or pencil
After this, remove the copy paper and template, trace the resulting contours again with a pen or felt-tip pen

Don't be afraid to draw lines with a pen and pencil. The ink will cover the contours drawn earlier in pencil and the letters will be drawn evenly and equally. But if you skip the step of drawing pencil lines, the inscription will come out sloppy.

You can choose from the letter outlines proposed in our article and use them as cheat sheets when creating your text.

There are many types of special garlands sold in stores, but to make this day truly unique, we suggest making the decorations yourself.

Here we have collected interesting ideas and master classes that will help you make Happy Birthday garland from paper, fabric or felt!

As well as ready-made templates and layouts for printing!

Making a garland with the letters “Happy Birthday” can take 15 minutes, or half an hour, if you don’t rush.

Download and print the template

Of course, if you want, you can sit and come up with templates, and then draw them yourself. But to make this task a little easier for you and speed up the process, we have collected interesting and original garlands of “Happy Birthday” templates, you can simply download and print them, and then use it to create holiday garlands.

Template #1

Fully ready-made template garlands. You just need to download (click on the red button). Print. And assemble according to the instructions below.

Template No. 2

Letters in two colors: soft green and pink. Letters from the entire alphabet - print and collect the right words. How to attach it to a thread or bow - described below

Template No. 3

Flags and bright rectangles. Choose the one you like. Print on a color printer and Letters can be written in with a marker of any color!

How to assemble a garland

Just imagine how many wonderful lettering you can make using these templates! They are suitable for a birthday or any other holiday, or even just to make an unexpected surprise for a loved one.

The point is that there are stencils of all the letters of the alphabet that can be printed and folded into the desired inscription.
And it is not necessary to print the entire alphabet, select only the individual letters you need.
If desired, you can use letter stencils add some decorating elements.
To save ink, the letters are designed in a textured style, and you can also use the printer settings to control ink consumption.

TIP: which will save you from wasting paper: print one letter, turn the paper over and print another one on the other side.

How and with what to fasten the letters of the garland

To make a garland for a birthday, it’s not enough to print stencils, you also need to somehow fasten them and hang them. Let's look at options on how this can be done.

We attach the letters to one long thread

For this you will need:

ready-made letter templates,
thick thread or ribbon,
hole punch, scissors.

Work progress:

Using a hole punch, make a hole in each letter has 2 holes on top, and then you need to string the letters onto a rope or ribbon.
If the thread is thin, fold it several times, sometimes it looks even more interesting.
It is important to string the letters in in the right order, so as not to redo it later, so it’s better to first arrange the letters the way you need and take one at a time.

ATTENTION! You need to tie a knot on each letter so that they do not move out of place and get together.

TIP: don’t pull the rope too hard and it will sag towards the middle, but if the rope is too tight, it’s a waste of time.

We tie the letters with a bow

This method of fastening is suitable if you cut out the letters not along their contours, but leaving some extra space in reserve, otherwise the bows may partially overlap the letters (you need to look at the situation, if the letters are very large, then everything will be fine).

You will need:

ready-made letter templates,
thick thread or ribbon,
hole punch and scissors.

As you can see, all the same materials as in the previous method. Only here we will connect adjacent letters with separate threads.

Work progress:

Do hole punch 2 holes in each template and arrange them in the order in which you will take them.
Take the first one and the second letter and tie them with a bow. To make the process more orderly, you can immediately cut the required number of ribbons of the same length.
When the first two letters are connected, do the same with the second and third and so on until the end. Your garland is ready.

We fasten the garland with clothespins

This type of fastening lately can often be seen at various photo dryings, that is, photography exhibitions. The method is convenient and fast, and also does not require a hole punch, which is an important advantage for those who do not have one.

Work progress: Attach the letters one at a time onto a long rope with clothespins. All!

How to attach: in all these methods, the last step is to attach the finished garland to the wall. Of course, no one will punch through nails for the sake of a garland, so the ends of the rope can be stretched and tied to any protruding objects (cornice, cabinet handle, pipe, etc.).

Fastening with tape to the wall

Another option is to attach it with tape (if this does not damage the surface), and in this case it is better not only at the edges, but in several other places so that the garland does not fall. You can carefully stick pins into the wallpaper and hook the rope onto them.

Felt garlands “Happy Birthday”

Here you will have to work harder, but the result will show how much care was put into creating such a garland. We have prepared two master classes that will not leave you indifferent.

You will need:

Colored felt or felt fabric (the quantity depends on the inscription)
Self-adhesive paper (or freezer paper, if you find it in our stores)
Letter stencils
Scissors or utility knife
Rope, ribbon or thick thread (on which you will attach the letters)
White thread (for sewing layers of fabric)
Sewing machine (if you don’t have one, you can do everything by hand)
Clothespins

Work progress:

Step 1:

On self-adhesive paper print stencils of the letters needed for the inscription. You choose the size of the letters yourself, depending on how you want the inscription to look and how much space you have for it on the wall.
Cut out rectangles with letters, and then to each of them an empty rectangle of paper and fabric of the same size.
Fold the rectangles described in the previous paragraph so that the fabric is between the paper, the lines of the letter should be towards the top.

When working with self-adhesive paper you just need to stick it on both sides of the fabric, if you find freezer paper, go over the top on both sides with an iron, this will hold the layers together.

Cut out the letters along the outline. Carefully peel off the paper on both sides. We got these pretty letters:

STEP 2:

Now we will make the letters thicker so that they have best view and not so twisted on the rope. To do this, we place the fabric letters on another layer of felt or felt and iron them.
We sew a machine or hand stitch along the contours of the letters at a distance of approximately 1-2 mm from the edge. We advise white thread, since it looks good on all colors of fabric, otherwise you will have to select a separate thread for each letter, and this is just an additional unnecessary waste of time and money.
Cut out each letter along the contour. They are already ready, all that remains is to attach them.
Hanging a long rope, securing its ends to the wall. Using clothespins, we attach each letter to it in the required order to create the selected inscription.

Now the garland is ready to delight the birthday boy and surprise the guests!

"Happy Birthday" poster on fabric

Probably each of you at least once in your life, at least once in school, drew a congratulatory poster. The manufacturing method proposed in this master class takes this art to perfection. new level. Patchwork quilts They have long been pleasing many with their warmth and coziness and they will no longer surprise you, but the patchwork poster, I am sure, will be a complete surprise and an original novelty.

You will need:

Scraps of felt or felt fabric (in in this case 9 pieces)
Scissors or utility knife
Letter stencils
Adhesive padding (for example, dublerin or non-woven fabric)
Ironing iron (or any cotton fabric)
Wooden stick
Thick thread for fastening

Work progress:

Lay out scraps of felt or felt fabric to form a rectangle. Consider the combination of colors so that everything together looks harmonious and holistic.
Adjust the scraps so that they overlap each other by about 1.5 cm.
Place adhesive tape along the edges of the lower flaps; its width is equal to the width of the fabric overlay, that is, 1.5 cm.
Iron the fabric carefully. We recommend using an ironing iron so as not to spoil the surface of the fabric itself.
You can trim the shape of the poster, giving it the desired dimensions.
The top edge of the poster needs to be processed. To do this, turn it inside out by about 1.5-2 cm, this depends on the thickness of the stick, which you will then insert into the resulting hole. Secure the lapel with hand or machine stitching.
Place printed and cut out stencil letters on top of the fabric poster to create the desired greeting message.
Lightly trace the letters with chalk or a thin piece of soap; they can then be easily erased. You can use a pencil, but then you need to cut off these lines too.
Cut out the letters.

The last thing to do is insert wooden stick Tie a thick thread or ribbon into the hole in the top of the poster and along its sides. Hang up the poster and enjoy the holiday spirit!

Garlands: Fabric marker

This master class will also have templates, but you no longer need to cut out the letters. Such a garland looks very neat and beautiful, and will certainly please the birthday boy.

And the most important advantage of fabric garlands is that they can be stored for a long time!

You will need:

fabric, paint or marker,
letter templates,
scissors, ruler,
thick thread, glue.

Work progress:

Find or buy fabric in your home that is similar in type to the one shown in the photo. A fabric like burlap works well. It should be light in color with a discreet pattern that will complement the letters and not draw attention away from them onto itself.

Cut the fabric into even rectangles. In this case it is 17x12 cm.
Choose a stencil of letters in the style you like and print. Then place each letter on a separate piece of fabric and trace.
Paint the letter and let it dry. A marker will also work.
The color should be contrasting and stand out well against the background of the fabric, not merge, so that the inscription can be read even from afar.

TIP: As an alternative, you can cut out templates in thin plastic or film, apply them to the fabric and immediately sketch

Now you need to attach the letters to the thread, forming a garland. Determine at what distance from each other they should be and glue them on a thick thread. You can also attach each letter with two clothespins.

"Happy Birthday" Garland Ideas

Also look at other options for birthday garlands: with glitter, with balloons! Be inspired, and let this day be truly special and unique for you!

Letter stencils – useful material for creating a variety of crafts. We have selected several convenient templates for you, with the help of which you can do a lot of interesting things with your own hands. Some of them can also be used for children's creativity, because they look very funny. Others are more strict and classic. There are also many original stencils in the selection.

All letter templates are suitable for cutting out - just print them on paper. If you don’t have this opportunity, try to draw them yourself. Some stencils can simply be used as interesting idea. Most of the letters are collected in the alphabet (Russian or English) - you can select from the collection and print only those that you need.

All images are clickable and available in good quality. In addition, they can be opened in a graphic editor to combine them with something. So, for example, if you need letters to cut out Russian and English alphabets at the same time, you can easily collect them on one sheet and print them together. Templates can also be enlarged or stretched to achieve the desired size of the workpieces.

In the selection you will find Russian letters that are perfect for cutting out to decorate children's blocks or home alphabet. Some of them are accompanied by silhouettes of animals, others by funny faces. The same can be done with stencils of letters of the English alphabet.

All presented templates are suitable for designing postcards or album covers, volumetric crafts(like soap or candles), creating patches on clothes, etc. Many of them would be wise to print on paper and use for scrapbooking. If you want to spray or write with paints, print the entire stencil and cut out the letters themselves with a stationery knife (you won't need them), without touching the paper.

The question is how to make a stencil in Microsoft program Word is of interest to many users. The problem is that finding a sane answer to it on the Internet is not so easy. If you are interested in this topic, you have come to the right place, but first, let's figure out what a stencil is.

A stencil is a “perforated plate”, according to at least, this is the meaning of this word exactly translated from Italian. We will briefly talk about how to make such a “plate” in the second half of this article, and immediately below we will share with you how to create the basis for a traditional stencil in Word.

If you are ready to get seriously confused, using your imagination at the same time, you can quite easily use any font presented in the standard set of the program to create a stencil. The main thing, when it is printed on paper, is to make jumpers - places that will not be cut out in the letters limited by the outline.

Actually, if you are ready to sweat so much over the stencil, it is not clear why you need our instructions, since you have all the MS Word fonts at your disposal. Choose the one you like, write a word or type the alphabet and print it on a printer, and then cut them along the contour, not forgetting the jumpers.

If you are not ready to spend so much effort, time and energy and a classic-looking stencil suits you quite well, our task is to find, download and install that same classic stencil font. We are ready to save you from a grueling search - we found everything ourselves.

The Trafaret Kit Transparent font completely imitates the good old Soviet TS-1 stencils with one pleasant bonus - in addition to the Russian language, it also contains English, as well as a number of other characters not present in the original. You can download it from the author's website.

Setting the font

In order for the font you downloaded to appear in Word, you must first install it on the system. Actually, after this it will automatically appear in the program. You can learn how to do this from our article.

Creating a stencil base

Select Trafaret Kit Transparent from the list of fonts available in Word and create the desired inscription in it. If you need an alphabet stencil, write the alphabet on the document page. Other symbols can be added as needed.

The standard portrait orientation of a sheet in Word is not the most suitable solution for creating a stencil. It will look more familiar on a landscape page. Our instructions will help you change the position of the page.

Now the text needs to be formatted. Set the appropriate size, select the appropriate position on the page, and provide sufficient padding and spacing, both between letters and between words. Our instructions will help you do all this.

Perhaps the standard A4 sheet format will not be enough for you. If you want to change it to a larger one (A3, for example), our article will help you do this.

Note: When changing the sheet format, do not forget to change the font size and related parameters accordingly. No less important in this case are the capabilities of the printer on which the stencil will be printed - support for the selected paper format is required.

Stencil printing

Having written the alphabet or inscription and formatted this text, you can safely proceed to printing the document. If you don't know how to do this yet, be sure to read our instructions.

Creating a stencil

As you understand, there is practically no sense in a stencil printed on a regular piece of paper. It can hardly be used more than once. That is why the printed page with the base for the stencil needs to be “strengthened”. To do this you will need the following:

Cardboard or polymer film;
carbon copy;
Scissors;
Shoemaker or stationery knife;
Pen or pencil;
Board;
Laminator (optional).

The printed text must be transferred to cardboard or plastic. In the case of transferring to cardboard, ordinary carbon paper (copy paper) will help to do this. You simply need to place the page with the stencil on the cardboard, placing carbon paper between them, and then trace the outline of the letters with a pencil or pen. If you don't have carbon paper, you can press the outlines of the letters with a pen. A similar thing can be done with transparent plastic.

And yet, with transparent plastic it is more convenient, and it would simply be more correct to do it a little differently. Place a sheet of plastic on top of the stencil page and trace the outlines of the letters with a pen.

After the stencil base created in Word is transferred to cardboard or plastic, all that remains is to cut it out empty seats using scissors or a knife. The main thing is to do it strictly along the line. It is not difficult to move the knife along the edge of the letter, but the scissors must initially be “driven” into the place that will be cut, but not into the edge itself. It's better to cut plastic sharp knife, having previously placed it on a strong board.

If you have a laminator on hand, the printed sheet of paper with the stencil base can be laminated. Having done this, cut out the letters along the outline with a stationery knife or scissors.

When creating a stencil in Word, especially if it is an alphabet, try to make the distance between the letters (on all sides) no less than their width and height. If this is not critical for the presentation of the text, the distance can be made a little larger.

If to create a stencil you did not use the Trafaret Kit Transparent font we suggested, but any other (not stencil) presented in the standard Word set, let us remind you once again, do not forget about the jumpers in the letters. For letters whose outline is limited internal space(an obvious example is the letters “O” and “B”, the number “8”), there must be at least two such jumpers.

That's all, now you know not only how to make a base for a stencil in Word, but also how to make a full-fledged, dense stencil with your own hands.