For any home craftsman, having their own stationary sawing machine is time saving and safe work.

You can buy a ready-made stationary circular. The cost of small machines starts from 9,000 rubles, more or less decent stationary saws are sold in the price range from 30 to 100 thousand.

Despite the apparent complexity of the design, any craftsman with elementary locksmith skills can make a homemade circular saw. Moreover, during the design process it is possible to add functions that are not provided by the manufacturer.

What is a circular saw for?

Before starting work, it is necessary to determine the main tasks of the sawing machine. If you just need to cut firewood for the winter, or do basic carpentry work like making a fence, a sturdy table with a slot for a saw blade is enough. Such options are popular in rural areas.

Circular for working with logs

Of course, there can be no question of any safety and functionality when using such a device.

In some of these "models" there is a shaft for fixing the knives of a planer or jointer. As a rule, a bed is cooked from a corner or a channel, an electric motor is fixed on it from a decommissioned factory ventilation, and with the help of a pulley, the torque is transmitted to the disk. It makes no sense to describe in detail the manufacturing technology of such a machine.

Another thing is if you want to do carpentry work. In this case, you need a coordinate table with guides that are fixed at different angles.

Since such a stationary saw can work with small workpieces, it is necessary to take care of the safety of the operator. It is desirable to provide for the adjustment of the rotation speed and the possibility of easy change of discs with different diameters.

Be sure to install a protective cover over the disk, and cover the rotating parts of the drive with covers. The starting device is equipped with an emergency switch, and the stop button is placed in an accessible place and is made large.

Don't miss in an accident

How to make a circular, keeping a balance between economy, functionality and safety

Consider the main components that make up a home circular saw. You can make them yourself, but with certain skills and tools.

The frame can be made from a metal corner (channel) purchased from scrap metal collectors. If you have the funds, contact the metal rolling warehouse. Legs can be made from old water pipes, connecting them with corners.

A good option for a homemade frame made of rolled metal

IMPORTANT! The use of bolted connections is prohibited, because due to vibration, such a mount will unwind.

Electricity must be used. Be sure to reinforce the corner joints with a jib. The upper part of the frame (on which the table will rest) and the podium for the electric motor are made from a corner with a side of at least 50 mm.

If the machine is equipped with wheels for movement, they must be with steel rims and have locks. The higher the mass of the bed, the more stable the machine will be, and the safer the work will be.

A do-it-yourself circular saw is an excellent tool that allows you to solve a large number of household and other tasks. In fact, it is not difficult to make this device on your own even if you do not have any special skills, the most important thing is to understand at least a little the principle of processing metal alloys.

The materials needed for the job can be found in the home workshop or in the garage. So, do-it-yourself circular saw made from the following elements:

• corner made of strong steel;
• rectangular profile pipe;
• engine.

The finished circular saw can be placed on a workbench. If you do not have it, you will have to make a table yourself. The engine can be taken from an old walk-behind tractor or a washing machine.

Circular from an angle grinder

If you have your own "Bulgarian", this is very good. To create a "circular" you need to make an axial handle and a sliding stop to the unit. The design of the sliding stop includes a pair of pieces of steel angle placed on the sides of the saw blade. With the help of nuts and bolts, they are connected by a transverse ligament, and the gap between the working part and the sidewalls of the structure will be provided by washers.

On the "grinder" you need to pre-tighten the metal band clamp with a screw tie down. Then you need to attach the folded metal strip in half to the holes for the sliding stop. The post and collar can be combined, but in this situation the metal strip will be too thick.

Then, in the gearbox of the future tool, you will need to make several holes for the bolts. For this purpose, the body is disassembled, and the points where drilling will take place are indicated. With the help of the holes made, the axial handle is fixed, because the “regular” handle will not allow you to make a good cut, even if the master has very strong hands.

The handle is created from a metal tube or rod. Designs can be shaped like a horn or staple. The ends of the element, with which it will be attached to the gearbox, must be provided with holes for installing fasteners.

You also need to make a bar that will regulate the process. For this purpose, you need to take a piece of a metal rod, make a loop from one of its ends, rivet it slightly and make a hole for the front stop bolt.

From the other end of the rod you need to make a thread, which will allow you to connect it to the handle. In advance, one strong nut should be screwed onto this thread, and after the structure is assembled, the second. Lowering and tightening them, you can adjust the depth of cut. By the way, if you use a drill instead of a grinder, you can make a similar tool.

Thus, you can independently make a good circular saw from an ordinary grinder, with which you can cut various materials.

Compact desktop machine

Above we talked about how to assemble a manual circular. Now we will tell you how to turn this device into a stationary one. This process involves the manufacture of a U-shaped frame from a pipe, as well as the installation of a transverse arm. The lower ends of the structure must be bent horizontally in the direction of the cut. They are bolted to the table. Stability is provided by additional supports.

Lever mobility is provided by cutting a horizontal segment into two identical parts, which are fixed to each other with clamps. The cutting disc is attached to the vertical element of the bed with clamps.

Stationary installation

A machine that looks like factory models needs a competent attitude during the assembly process, so you need to take care of all the little things in advance. The desktop version of the "circular" differs from the stationary one only in the height of the bed, which is determined by the features of the work and the size of future workpieces. One-time processing can also be done using an ordinary table saw, which after work can be easily removed to a pantry or barn. But the master, who constantly deals with wood, will need a stationary installation. Therefore, he needs to make a table for a circular saw with his own hands.

The circular saw has the following advantages:

• Such equipment allows you to make better and deeper cuts.
• The machine is much more convenient than manual equipment.

From the foregoing, we can conclude that self-made circular saws have a completely understandable and simple design, and the drawings that can be found on the World Wide Web will greatly simplify the process of assembling equipment. Before self-production of the "circular", you should separately consider all the necessary elements in order to understand the nuances of the functioning and installation of home-made equipment.

An emphasis for longitudinal sawing.

Having perfectly aligned the saw with one of the edges of the table, I attached it with M4 screws. To do this, I had to drill the iron base of the circular in four places.

In general, any circular is suitable for installation on a table, but if you choose the type of fastening with screws for the base, then it is better to choose a model with an iron base. The cast may crack.

There is another popular way to fix the circular to the table without drilling holes in the base - attach it with clamps that fix the base by pressing it to the surface. Only this method seemed to me not true enough in terms of accuracy and reliability of the installation, and I did not use it.

Another important parameter of a manual circular is the ability to connect a vacuum cleaner. If you saw without a vacuum cleaner, fine wood dust rises into the air.

The disc has been sawn to the top side of the table top. Height - 40mm (Bosh wood disc 160mm). The table top reduces the cutting depth by 9 mm. The depth of cut is set on the circular saw itself. It is convenient that the disk can be completely hidden in the table.

UPD: IMPORTANT! On a number of budget circulars, it may turn out that the disk is under an imperceptible slope. And all cuts will be beveled. Be sure to check with a tool square that the disc is at 90 degrees relative to the table surface. (before installing the saw, you can check the angle relative to the native site. If the disk is not at a right angle and there is no way to set the ideal angle of the site, you can put several strips of tin on one side under the site, achieving the ideal angle (you can use washers for the screws that fasten the saw to the table, but this solution is worse)

Inside the table I placed a socket for the saw, which will now turn on with the start button.

This is how you can connect a vacuum cleaner to the saw. In general, the table is ready and you can saw. (done in one evening and one morning).

Of course, it is possible to cut without equipment using slats and clamps, but it is inconvenient.

This design, clinging to the edges of the table and aligning with them, can move along the saw blade. By pressing the rail against the sled, you can easily cut it exactly at 90 o. Thin pieces of wood can be placed inside the sled.

You can even cut the rail like a sausage :) For example, I cut several pieces of different thicknesses.

Slides solve only part of the problems. For longitudinal sawing, a side stop is also needed.

I glued brackets from plywood that will cling to the edge of the table.

Clings to the edges with a death grip.

The circular saw is a dangerous tool. In order not to saw off my fingers, I made a simple pusher from the waste of a furniture board.

I have already managed to work with this table, sawing and slats, furniture panels, plywood. It became much easier to perform all these works than I did when sawing off with a hand circular saw.

In the future, I will further refine this table:
- I will remake the side stop for longitudinal sawing, so that when moving, it always remains parallel to the disk
- I will put a removable riving knife to which the disc protection will be attached
- I'll make a dust extraction from the top of the table. (Now when I drink, the disc throws wood dust right in my face)
- I will finish the improved pusher. I have already begun to make a more interesting and convenient version of the pusher, I will write about it in the future.

I will gradually implement this in the future, but for now I will work like this.

It is difficult to imagine a carpentry workshop without a circular saw, since the most basic and common operation is the longitudinal sawing of workpieces. How to make a homemade circular saw will be discussed in this article.

Introduction

The machine consists of three main structural elements:

• base;
• sawing table;
• parallel stop.

The base and the sawing table itself are not very complex structural elements. Their design is obvious and not so complicated. Therefore, in this article we will consider the most complex element - the parallel emphasis.

So, the parallel stop is the movable part of the machine, which is the guide for the workpiece and it is along it that the workpiece moves. Accordingly, the quality of the cut depends on the parallel stop, because if the stop is not parallel, then either the workpiece or the saw curve may jam.

In addition, the rip fence of a circular saw must be of a fairly rigid construction, as the worker is exerting force by pressing the workpiece against the fence, and if the fence is allowed to move, this will lead to non-parallelism with the consequences indicated above.

There are various designs of parallel stops, depending on the methods of its attachment to the circular table. Here is a table with the characteristics of these options.

Rip fence design	Advantages and disadvantages
Two-point attachment (front and back)	Advantages:· Pretty rigid construction · Allows you to place the stop in any place of the circular table (to the left or right of the saw blade); Does not require the massiveness of the guide itself Flaw:· For fastening, the master needs to clamp one end in front of the machine, and also go around the machine around and fix the opposite end of the stop. This is very inconvenient when selecting the required position of the stop and is a significant drawback with frequent readjustment.
Single point attachment (front)	Advantages:· Less rigid construction than when fixing the fence in two points · Allows you to place the fence in any place of the circular table (to the left or right of the saw blade); · To change the position of the stop, it is enough to fix it on one side of the machine, where the master is located during the sawing process. Flaw:· The design of the stop must be massive in order to provide the necessary rigidity of the structure.
Fastening in the groove of the circular table	Advantages:· Fast changeover. Flaw: Complexity of the design, Loosening of the circular table structure, Fixed position from the line of the saw blade, Quite a complex design for self-manufacturing, especially from wood (made only from metal).

In this article, we will analyze the option of creating a design of a parallel stop for a circular with one attachment point.

Preparation for work

Before starting work, it is necessary to determine the necessary set of tools and materials that will be needed in the process.

The following tools will be used for work:

1. Circular saw or can be used.
2. Screwdriver.
3. Bulgarian (Angle grinder).
4. Hand tools: hammer, pencil, square.

In the process, you will also need the following materials:

1. Plywood.
2. Massive pine.
3. Steel tube with an inner diameter of 6-10 mm.
4. Steel rod with an outer diameter of 6-10 mm.
5. Two washers with an increased area and an inner diameter of 6-10 mm.
6. Self-tapping screws.
7. Joiner's glue.

The design of the stop of the circular machine

The whole structure consists of two main parts - longitudinal and transverse (meaning - relative to the plane of the saw blade). Each of these parts is rigidly connected to the other and is a complex structure that includes a set of parts.

The pressing force is large enough to ensure structural strength and securely fix the entire rip fence.

From a different angle.

The general composition of all parts is as follows:

• The base of the transverse part;

1. Longitudinal part

, 2 pcs.);
• The base of the longitudinal part;

1. clamp

• Cam handle

Making a circular

Preparation of blanks

A couple of things to note:

• planar longitudinal elements are made from, and not from solid pine, like other parts.

At 22 mm, we drill a hole in the end for the handle.

It is better to do this with drilling, but you can just fill it with a nail.

In the circular saw used for work, a home-made movable carriage is used from (or, as an option, a false table can be made “in haste”), which is not very a pity to deform or spoil. We drive a nail into this carriage in the marked place and bite off the hat.

As a result, we get an even cylindrical workpiece, which must be processed with a belt or eccentric grinder.

We make the handle - this is a cylinder with a diameter of 22 mm and a length of 120-200 mm. Then we glue it into the eccentric.

Cross section of the guide

We proceed to the manufacture of the transverse part of the guide. It consists, as mentioned above, of the following details:

• The base of the transverse part;
• Upper transverse clamping bar (with oblique end);
• Lower transverse clamping bar (with oblique end);
• End (fixing) bar of the transverse part.

Upper cross clamp

Both clamping bars - upper and lower have one end not straight 90º, but inclined ("oblique") with an angle of 26.5º (to be precise, 63.5º). We have already observed these angles when sawing blanks.

The upper transverse clamping bar is used to move along the base and further fix the guide by pressing it against the lower transverse clamping bar. It is assembled from two blanks.

Both clamping bars are ready. It is necessary to check the smoothness of the move and remove all defects that prevent smooth sliding, in addition, it is necessary to check the tightness of the inclined edges; gaps and cracks should not be.

With a snug fit, the strength of the connection (fixing the guide) will be maximum.

Assembly of the transverse whole part

Longitudinal part of the guide

The entire longitudinal part consists of:

, 2 pcs.);
• The base of the longitudinal part.

This element is made from the fact that the surface is laminated and smoother - this reduces friction (improves sliding), as well as denser and stronger - more durable.

At the stage of forming the blanks, we have already sawed them to size, it remains only to ennoble the edges. This is done with edging tape.

The edging technology is simple (you can even glue it with an iron!) And understandable.

The base of the longitudinal part

And also additionally fix with self-tapping screws. Do not forget to observe the 90º angle between the longitudinal and vertical elements.

Assembly of the transverse and longitudinal parts.

Right here VERY!!! it is important to observe the angle of 90º, since the parallelism of the guide with the plane of the saw blade will depend on it.

Installation of the eccentric

Guide rail installation

It's time to fix our entire structure on a circular machine. To do this, you need to attach the bar of the transverse stop to the circular table. Fastening, as elsewhere, is carried out with glue and self-tapping screws.

... and we consider the work finished - the do-it-yourself circular saw is ready.

Video

The video on which this material was made.

The household often lacks a circular saw, especially if major repairs or construction are underway. Not everyone can afford industrial products - they are too expensive. But you can make a circular yourself, using the materials that are available in the household.

Design - the main nodes, their purpose

A do-it-yourself stationary circular saw is created with advancement in several possible directions:

• adaptation of an existing hand tool, using an engine and a circular saw for new opportunities;
• improvement of industrial products to expand functionality;
• assembly from separate parts, made mainly in-house.

A stationary circular machine includes several main components: a table, a shaft, an engine, and some others, the characteristics of which are not so important.

The table serves for fixing woodworking mechanisms. It can be assembled completely from metal, which is preferable, especially for machine tools with a large engine. Wood also makes good circular tables. But it must be borne in mind that the countertop should be covered with a sheet of metal, otherwise the wood will soon wear out. Tables must be very rigid and stable, capable of withstanding a considerable load during work. The surface is made perfectly flat; protective shields must be installed above the rotating parts.

For a homemade circular, the engine from the washing machine is well suited. Portable tools are less suitable: their collector motors are designed only for short-term work. They have very high speeds, low efficiency, they are afraid of clogging. You can use a three-phase electric motor, but if there is no 380 V on the farm, you will need to purchase capacitors to make it work from 220 V.

The most responsible node is the shaft. Use ready-made, if available, or machined from round metal. Work on a lathe is performed in one setup, then, together with the working bodies, the centering is checked. Even the minimum beat is unacceptable, otherwise it will become stronger in work, at which it is unacceptable to work. Seats are provided on the shaft: for a circular saw and for pulleys on the other side. You can also make grooves for planer knives.

Basic parameters - calculation of power, revolutions, transmission

The characteristics of the saw blade, the engine and the maximum thickness of the lumber that can be cut are interrelated. On the purchased circular disk, the maximum speed for which it is designed is indicated. The number of revolutions transmitted by the engine to the shaft should be less. The power of the motor influences the maximum allowable sawtooth diameter. The diameter must be at least three times the thickness of the material, otherwise sawing will be difficult. It is believed that for sawing materials with a thickness of 100 mm, you need a motor of at least 1 kW of power.

The transmission is made only by a V-belt - if foreign objects get under the saw, the material is jammed, the belt slips on the pulleys. Traumatism in such cases is practically excluded. It is important to choose the right gear ratio. We take into account two indicators: engine speed and the maximum allowable number of revolutions of the circular saw. We calculate the required diameters of the pulleys. A pulley with a large diameter is installed on the engine, and a smaller one on the shaft for the circular to increase the number of revolutions.

The revolutions of the shaft with a circular saw are as many times greater than the revolutions of the engine, as the diameter of its pulley is smaller than the diameter of the pulley on the engine.

Woodworking machine - a capital product for the home

For working with wood in large volumes, it is better to have a machine that allows you to cut the material, plan, choose a quarter. Requires a sufficiently powerful electric motor, hard table. We present a structure made of steel angle and sheet steel. It provides a cutting depth of 60 mm, it is possible to plan boards with a width of 200 mm. A three-phase motor 1.1 kW, 2700 rpm is used. Capacitors are required for connection to 220V.

1 - machine frame; 2 - panel; 3 - starter; 4 - a device for adjusting the height; 5.7 - desktop of two halves; 6 - base; 8 - engine; 9 - platform; 10 - studs M10; 11 - circular disk; 12 - shaft; 13 - stops of the lifting mechanism; 14 - driven pulley; 15 - belt; 16 - drive pulley; 17 - switch.

The working table has dimensions of 700×300 mm. In the drawing we see that the height of the entire structure is 350 mm. The height is insufficient for comfortable work, the circular will have to be installed on an additional platform, it weighs only 35 kg. You can increase the length and width, increase the height up to 1200 mm. We adjust the rest of the dimensions to fit them, but the design features remain unchanged.

First, we make the bed frame from steel corners 25 × 25 mm. If we are not going to increase the height, we make another same lower frame. For a frame with a greater height, first we weld four legs from the same corners to the upper frame, and then we tie them at a height of 15–20 cm from the bottom. The lower frame has slots for the motor platform locking bolts. Two studs are welded to the back side of the platform, which go into the holes on the back of the lower frame. Tightening the studs, tighten the belts, then lock the platform by tightening the nuts on the studs that go into the grooves.

To adjust the height of the table in relation to the saw, we use a simple lifting mechanism. It consists of racks, in the upper part of which we cut grooves at an angle of 45 °. In total, eight racks are needed - four on each side. We weld them to the frame with grooves located in a mirror image. We attach the crossbars to the outer racks. In the middle of each of them we drill holes, weld nuts. Threaded shafts will move along them to control the rise.

At the end, they rest against the racks welded to the drawers assembled from the corners of 75 × 50 mm. On the side, we weld the studs into them opposite the grooves for the adjusting mechanism. The table consists of two equal halves and is attached to the sides with countersunk bolts. The adjustment mechanism works like this:

• loosen the nuts on the racks;
• turn the screw that presses the stop, raising or lowering the table;
• tighten the stud nuts;
• perform a similar adjustment for the second half of the working surface.

The design can be simplified without installing the adjusting shaft. Raise and lower the table manually. If you assemble the table not from two halves, but as a solid one, you will need only four racks for the lifting mechanism.

Hand-held circular saw - turning into a stationary one

It is easy to make a stationary one from a manual circular saw, expanding its capabilities. The first thing you need is a table. Finnish plywood will serve as a convenient material, which, unlike ordinary plywood, is laminated - the workpieces slide well over the surface during processing. It is thick enough to withstand a lot of weight, moisture resistant, and can be processed well. You can use ordinary plywood 20 mm, only it needs to be painted, and it is better to cover it with sheet steel or textolite.

It must be understood that the depth of cut will decrease by the thickness of the cover. You will need a large diameter disc so as not to reduce functionality compared to a portable tool. We make the dimensions of the tabletop sufficient so that the workpiece fits in width. It should be added that an electric planer and a jigsaw can be additionally strengthened on a wide table, which will make the machine universal.

Using drawings and explanations, it is not difficult to make accessories for a circular saw that will expand its capabilities.

We mark a rectangle of the required dimensions on a sheet of plywood, cut it out, process the edges. With the sole we apply a hand circular to the surface and mark the attachment points with a pencil. We make a slot for a circular saw. You can slightly deepen the attachment point using a cutter, but not more than 10 mm, so as not to weaken the countertop. This manufacturing method will bring the depth of cut closer to the circular saw indicated in the passport.

We make a frame (tsargi) from the boards, which we will install from below to strengthen the structure. We fasten four boards into a box, glue it to the countertop, securing it with clamps. Through the table we screw screws into the boards. The holes for them are countersinked on top so that the heads of the self-tapping screws are hidden. We fasten the legs to the sides of the stationary saw, preferably with bolts with washers and nuts. The table should be provided with additional rigidity, so we make spacers at the bottom of the legs.

We make a restrictive bar equal to the length of the working surface. In it we drill two grooves perpendicular to the disk, in which the bar will move and be fixed at a certain distance from the saw blade. It remains to make changes to the control system: we fix the control button in the on state with electrical tape. We install a socket connected to the network on the drawer. In the break of the wire going to the saw, we mount the switch.

Some moments of the execution of home-made devices

No matter how well the circular is made, individual errors can lead to the fact that its performance will be limited. This concerns, at first glance, seemingly trifles. Let's start with the bearings for the shaft. The installation of conventional is justified if the machine is used from time to time. For a homemade device with constant use, it is better to install self-aligning bearings. They consist of two rows of balls, adjustable by tightening the clamping nut. Install a cover to protect against dust, chips is mandatory.

On the working surface, we put a scale in centimeter increments. This will make it much easier to work with the tree when determining the width of the cut. Many neglect to install a protective shield over the disc, but in vain - treatment from chips getting into the eye or in more serious situations is more expensive.

When working with different materials, it is often necessary to adjust the speed of the circular saw. A self-made design, as a rule, does not have the ability to control the engine speed. There is only one way out - the use of pulleys of various diameters. They are mounted on the motor shaft. If you undertake to order pulleys from a turner, immediately make a solid pulley with two or three different diameters.

Many people want to install a three-phase electric motor on the sawing machine without having 380 V. You will need capacitors rated for a minimum operating voltage of 600 V paper or oil-paper type.

We calculate the capacitance of capacitors based on the power of the electric motor: for 1 kW - 100 μF for a working capacitor Cf. We take the capacity of the starting Cn twice as large. The SB trigger is a button that automatically returns to its original position. The start is simple: SQ is turned on, SB is pressed for a couple of seconds. After starting, the button is released, as soon as the engine picks up speed, you can cut.