Economy is highly valued in housekeeping. That is why it is better to rationally use everything that is available. Including rainwater. For example, it is perfect for watering the garden. And this can be done using an ordinary barrel, properly equipped.

Materials and tools:
1. Barrel.
2. Wooden blocks.
3. Polymer pipes.
4. A pipe suitable for collecting rainwater.
5. Silicone sealant.
6. Ball valve 5 cm.
7. Self-tapping screws.
8. Nuts, screws.
9. Screwdriver.
10. Saw.
11. Pencil.
12. Roulette.

Operating procedure:
The first and main step is to choose a suitable surface for installing the barrel. It should be smooth and well compacted. The size also needs to be appropriate. If the ground is soft, it is recommended to install a wooden backing in the form of a shield.

You should take care of the stand in advance - without it you cannot lift the barrel. You can make such a device from blocks and scraps of wood, knocking them together like a stool.

Before using it in the required quality, it is recommended to carefully check the barrel for cleanliness and safety for health. If it previously served as a storage facility for hazardous substances, its use is prohibited. If everything is in order, a small hole is cut in the lower part. The diameter of the hole depends on the fitting that you plan to use. Another hole of the same diameter is cut a little higher.

The fittings are secured to the barrel with glue. It is recommended to additionally treat the bonding area with silicone sealant.

A tap for bottom drain is connected to the bottom. Next, the upper and lower holes are connected using a polypropylene pipe. This protects the barrel from overfilling even in heavy rains.

In order to collect water, you need to install an appropriate pipe. It is attached to the top of the barrel. From time to time it will be necessary to ensure that both the pipe and the barrel are not contaminated by leaves.

The final stage is connecting the hoses. To ensure uniform watering, they are perforated in several places in the form of small holes.

This system is very convenient because it is collapsible. This means that during frosts it can be easily untwisted. In addition, the cleaning process will not cause much trouble.

To water some garden plants, you need warm water, and therefore you need containers in which this water will be heated in the sun.

Most often, plastic barrels are used for this purpose, which are installed in a greenhouse or simply on the site. Often barrels are placed under drains, collecting rainwater for irrigation.

For gravity irrigation, the barrels are placed on a raised platform and a tap is mounted in them. If such an installation is not possible, then it will be necessary, or you will have to draw water from the barrel manually, which is not very convenient.

How to choose a barrel for irrigation

Nowadays there is a large selection of barrels for irrigation on sale - of all shapes, colors and displacement. It’s very easy to determine which one you need.

Calculate the volume of the barrel based on how many liters of water you need per day for irrigation. The water in the barrel is heated to the desired temperature (ambient) throughout the day, no less.

The form depends entirely on the place prepared for it.

I have a round barrel in the greenhouse with tomatoes, since there is a lot of space in it, and a flat barrel in the borage garden, since the greenhouse there is smaller and we could only “stick” a barrel of this shape. In both greenhouses we have drip irrigation, without using a pump, so the barrels are on a hill.

When installing the barrel on an elevated base, make sure that it is strong and the legs will not sway or sink into the soil, since the weight of the water barrel is very significant. If the soil is loose, we recommend installing a wooden backing in the form of a shield.

A 200 liter barrel for irrigation is the best option

I have 60 tomato bushes in my greenhouse; a 227-liter barrel is ideal; this volume is quite enough for watering. The second greenhouse is a little smaller - it contains cucumbers and peppers, there are enough barrels for 150 liters. But if you have room in the greenhouse for a large barrel, then take at least 200 liters.

When choosing a barrel, be sure to pay attention to the thickness of its walls. I had the unfortunate experience of purchasing a barrel with thin walls, and as a result it burst in all directions.

Making a stand for a barrel for irrigation, video

It is very important to make a strong stand for the barrel. It should easily support a weight of over 200 kg. Be sure to check the result with a level - the surface on which you will install the barrel for irrigation must be strictly horizontal, otherwise there will be a slight tilt and the container may gradually move off it, causing a lot of trouble.

Your feedback will help many gardeners avoid making mistakes and immediately buy a good barrel for watering. Also write, what brand of irrigation pump is better to buy?

Many people really want to make their lives more comfortable and convenient in all areas, including certain elements in their lives. Let's talk about dachas: nowadays more and more people are buying or building dachas. For some, a summer cottage is a profitable means of making a profit by growing or using various products, such as vegetables, fruits, and berries. Another part of the people uses the dacha only as a place to relax, or combine rest with work in the dacha.

But in any case, be it relaxation or gardening work, at the dacha you always want to freshen up or relax, and especially on hot days, take a shower in good conditions in comfort, because this is a completely affordable design. This design is called a shower cabin, which the company “World of Welding” will gladly manufacture for you. Such a cabin fits into any interior of your dacha or plot and will delight you not only with its appearance, but also with its incredible ease of use. Our company will produce a shower cabin for you at affordable prices, which means that many people have the opportunity to order a shower cabin. At the same time, you don’t have to be shy when ordering, because you can make all your desires and preferences come true.

Also, a shower cabin is relevant in private houses and cottages, when after a hard day on a hot day it will be nice to take a shower outside with sun-warmed water, drying off in the sun. As we can see, this offer is very tempting, especially if the shower cabins are made with high quality, as in our company.

Various water containers

Each shower stall requires water containers from which water will flow through hoses to the taps. Also, similar containers are needed in gardens on plots in private houses and cottages, such as tanks and barrels. Cubes with water are used not only for domestic and household purposes, but also for industrial purposes.

We produce welded stands for water containers, stands for tanks, stands for barrels, stands for water cubes.
Water tanks are used not only in country houses and cottages, but are also common in production. Most often they are used for storing drinking water, but sometimes such tanks are necessary for transporting liquid. In the warm season, such water tanks are installed in the sunniest place, then it will heat up naturally. Water tanks are also used in medical institutions; in this case, part of the drinking water is separated from the rest, which is used for technical needs.

Dependence of water quality on its purpose

We all know that the quantity and quality of water is a very important component in a person’s comfortable life. Let's look at a cottage: in this case, water is needed almost constantly, as it is used for dishes and laundry, as well as for cooking, for showers, baths, in the garage and bathhouse, for irrigation, ponds and fountains. As you can see, the need for water is very great. Depending on the purpose in which water is used, a certain quality is required.

For example, for washing, washing dishes and showering or bathing, you need water with a limited amount of iron compounds, neutral and soft enough, not containing viruses and germs. Water for irrigation may contain sand and silt, but its temperature should not be lower than 12°C so as not to harm the plants. An artificial pond is a living environment for fish and other beneficial inhabitants of the underwater kingdom, but the spread of bacteria and microbes must be prevented in it if possible. Therefore, the water here is partially renewed from time to time. Finally, the highest demands are placed on water for drinking and cooking, since human health depends on its quality.

Thus, from the total amount of water necessary for life in a single family cottage (1.5-4 m3 per day), the quality distinguishes between drinking water, intended for household needs and for irrigation, which means it is possible to use several water tanks to maintain the required quality.

Stands for water containers, for tanks, barrels, water cubes

Whatever the purpose of water, almost every container requires stands. Stands for water containers must be very durable, made from the best and highest quality materials in order to withstand the structure, otherwise it can even be dangerous.

Our specialized company “World of Welding” has extensive experience in the manufacture of products such as stands for various water containers: tanks, barrels, cubes and other containers. A welded metal stand is very necessary when installing such water tanks; with their help, it becomes possible to reliably install and fix them in a certain place and at a specific height.

The price of water containers is too high to choose a cheap and flimsy stand for it. That is, from a low-quality stand, the container can fall, break, or even break down altogether. Sometimes, due to ignorance, people buy stands that are not designed for a specific container or cannot withstand a certain weight, or people themselves overload the stand, then when installed, filled with water, and then destroyed, even the container itself can be damaged.

In addition, a poorly installed water container poses a huge danger when using it. After all, at any moment a low-quality stand can break and then the entire structure will fall. Unfortunately, companies that sell stands often do not stock the right stands that can support a certain weight and design.

If you want a high-quality stand for a water container, you must order it. Such an order will provide you with a competent and durable design of the stand; it will be made taking into account all possible loads and conveniences. Our company specializes in metal products and structures and manufactures all products to the highest level of quality.

The main advantages of metal structures are:

High load-bearing capacity - the ability to withstand significant loads with relatively small sections due to the significant strength of the metal;
- high reliability, since structures can be calculated quite accurately,
- lightness and transportability: metal structures are the lightest compared to structures made of stone, reinforced concrete and wood, since they are almost 4 times lighter than reinforced concrete and often lighter than wood (when used for the same loads), and since metal structures are the lightest with significant density metal, then they are more transportable and easy to install.
Metal welded supports can be made from a profile pipe, angle, channel or other rolled metal. The cost of stands is determined individually depending on the required material and the design itself.

"The World of Welding" - the world of your safety

Our company offers you the production of various metal structures to order. Our experts will help you choose the right material specifically for you to make a stand for a water container, tank, barrel and cube, as well as taking into account the dimensions, so that it is as durable and strong as possible and will serve you for many years, and you will be safe.

We have extensive experience in the manufacture of products such as stands for Eurocubes, stands for barrels, tanks and water containers.

We make custom-made stands for Eurocubes, tanks, barrels and water containers. We deliver throughout Moscow and Moscow region.

It may be necessary to make a welded metal stand when installing water containers such as Eurocubes, barrels and tanks.

Installing a barrel, tank, cube or Eurocube above the ground is necessary for backup water storage, watering the garden, organizing drip irrigation and creating water pressure.
The higher the stand, the higher the water pressure. For drip irrigation, it is enough to raise the container with water one meter above the ground.

With the help of a metal welded stand made by us, you can securely install water containers, tanks, barrels, cubes and Eurocubes in the place you need and at a given height, as well as securely fix them.

Water containers are quite expensive, so it is difficult to neglect the choice of a good, strong and durable stand for it. Simply, the container can break or break if it falls from an unreliable, weak stand.

If the stand is not designed for a specific container and is also overloaded with its weight, then when installed, filled with water and destroyed, it can damage the container itself.

A water container that is not securely installed and rests on a weak stand poses a major hazard.
Companies selling water containers often do not sell stands of the shape, size and strength the buyer needs.
In addition, there is a huge variety of shapes and volumes of plastic water barrels.

Therefore, the stand must be made for a specific water container, taking into account all possible loads and ease of use.

The reliability of the stand for a water container is ensured by the correct selection of the profile section used in its manufacture. If the stand is made of a thick, heavy profile, the more durable it is and can withstand greater loads.

Our company has extensive experience in the manufacture of welded metal stands for Eurocubes, water containers, tanks and barrels of various sizes.

Metal welded supports can be made from a profile pipe, angle, channel or other rolled metal.

We will be able to select the optimal material for the manufacture of a welded metal stand, taking into account its load-bearing capacity and various loads.

The price of a stand for a Eurocube, a stand for a barrel, a water tank, a stand for water containers.

	STAND FOR EUROCUBE
	MATERIAL	PRICE
	square pipe 40x40 mm	7600rub
	square pipe 50x50 mm	8300rub
	square pipe 40x40 mm	9100rub
	square pipe 50x50 mm	9600rub
	square pipe 50x50 mm	11000r
	square pipe 60x60 mm	12000rub

PRICE

square pipe 40x40 mm

6000rub

square pipe 50x50 mm

6500rub

Discounts when ordering two or more stands - 500 rubles per stand.
The cost of delivery of the stand is 1700 rubles + 4 rubles/km to you and back.

The cost of stands for a water container depends on the height to which the container needs to be raised, on the size and volume of the container, on the purpose of the container, tank, Eurocube, as well as on the design solutions used in the manufacture of the stand for your container.
Since there is a huge variety of water containers on the market, and also because customers themselves determine to what height they want to raise the container, the price of each stand is determined individually.
Call and check the price of a stand for your water container.

From us you can order the production of a metal welded stand for a Eurocube, tank, barrel, water container according to the dimensions you need, taking into account your wishes and in the shortest possible time.