We present a new project from our architectural bureau - a project of a two-story house with a hipped hip roof and a garage in the Oboldino-1 DNP, Moscow region. Working with the customer, we proposed placing a two-story house in the corner area of ​​the site. This location has several undoubted advantages, one of them is a large free space on the site where you can place, for example,. Another advantage is that in front of the garage there is an additional area for parking two cars.

The design of a 2-story house with a garage is a practical solution.

Let's take a walk around the house. On the ground floor there is a large kitchen-dining room combined with a living room, a guest room, a dressing room, a convenient pantry, a boiler room, a bathroom, and a cozy terrace with a barbecue. The layout of the kitchen-dining-living room area is open, which is undoubtedly an advantage.

You can buy a ready-made house project with a hipped roof from us

During the design process, the customer explained that he himself is a big fan of spending time at the stove in the kitchen, preparing culinary dishes for his family. Therefore, almost in the center of the kitchen-dining room there is an island with a stove and a work area for preparing delicious treats for all participants in the subsequent meal.

The dining table is located closer to the windows. On a fine day, the space around the table is illuminated by the bright sun from three huge windows on both sides of the world. After a hearty lunch, you can continue a leisurely conversation in the adjacent living room. On the second floor there is a parents' bedroom, two children's rooms, two dressing rooms and two bathrooms. Everything is done for a calm and relaxing holiday for the whole family after an eventful day.

Advantages of a house project with a hip roof

The main advantage of this project is a garage for one car and a terrace with a barbecue area combined with the house. These buildings surround the two-story house, merging with it into a single architectural style. The roof of the terrace and garage is visually a continuation of the hip roof of the house.
For our customer’s house, we chose a hip or hipped roof, which has unique advantages, including being able to withstand wind loads better than all types of roofs. The angle of inclination and height of the roof were chosen based on calculations of wind and snow loads in the area.
The absence of gables and large overhangs make the facade of the house harmonious, close to the “golden ratio”, i.e. almost ideal proportions of the entire house. In addition, such overhangs better protect the facades of the house on all sides from precipitation.

House plans with garage and terrace

1st floor

2nd floor

Project of a house with a garage and a terrace: how to combine zones?

Entrance to the terrace and garage is possible both from the house and from the street. It is very convenient when in bad weather you can drive into the garage and go into the house with heavy bags without getting your clothes wet.

When purchasing a standard project, linking a house is Free!

Between the garage and the terrace there is a bathroom and a boiler room. The chimney from the boiler room and barbecue stove is single and combined with supply and exhaust ventilation, which also saves space in the house.

A terrace with a barbecue is a place for socializing and entertaining a large friendly company. On the terrace there is a small kitchenette with a sink and a work area, where you can prepare excellent meals without entering the house and without disturbing your household with your presence. Although the terrace is open, it will always be warm, even in winter, when you are surrounded by close friends and like-minded people at a luxurious table. The warmth comes not only from the barbecue located on the terrace, but also from a friendly conversation with faithful comrades.

The material of the walls of the house is large-format brick. The house design is designed in such a way that during construction there is no need to trim any of them, which increases the speed of construction while simplifying it at the same time.

Advantages of large format bricks:

• speed of building a box house
• excellent thermal insulation
• excellent sound insulation
• environmental friendliness of the material
• non-combustibility of brick

Photo of the project of a two-story house with a garage and a hipped roof

The aesthetic qualities of the roof play an important role in the image of a residential building. But much more important is the reliability and durability of its design. Careful selection of its type and shape will ensure that the roof meets the needs of the developer.

Hip roofs of private houses have excellent resistance to wind. One-story houses with a hip roof look the most successful, because this type is suitable for buildings with a large area and gives them solidity. An individual feature of their complex design is the mandatory presence of dormer and roof windows, providing a good level of illumination and natural ventilation. With an equal area of ​​a private house, the area of ​​the hip roof will exceed the area of ​​the gable roof. This causes an increase in the cost of its implementation for the developer.

In the Z500 catalog, for two-story and one-story houses with an area of ​​100 m2 or more, four-pitched roofs of hip-type houses are provided. Such houses are popular among developers, so we regularly add new standard projects to the collection. You can buy our projects at prices that are at the average market level in 2017.

If among the ready-made architectural projects proposed in the catalog there are no ones that fully satisfy your requirements, then for a separate payment an original one with a hipped roof can be developed. There may also be a layout of houses with a hipped roof.

Project plans for houses with a hipped roof: features of the roof structure

A roof with four slopes can be hip or hip. A hip roof has slopes that converge at one point. The hip roof consists of two triangular slopes and two trapezoidal ones, which are connected by a ridge beam.

When choosing projects of houses with a hipped roof (photos, videos, drawings, diagrams, sketches can be viewed in this section) for turnkey implementation, it is important to take into account such a factor as the angle of the roof.

House plans with a hipped roof: conditions for choosing the roof angle

Since the angle of the slope allows the roof to easily drain precipitation, it is considered the most significant criterion for safety, practicality and aesthetic characteristics. Its value ranges from 15 to 65˚ and depends on:

• Climatic zone of construction. If it involves a large volume of precipitation, then it is advisable to provide a steep roof, the slope of which will be at least 45°. Less steep slopes are suitable for areas with a dry climate. A flat roof with an angle of inclination not exceeding 30˚ should be installed for buildings exposed to gusty, frequent winds.
• Roof covering material. For rolled materials, a slope angle of 2-25° should be provided, when using piece elements - from 15°, large-sized elements (metal tiles and slate) are laid on slopes with an inclination angle of 25°ﹾ.
• The presence of an attic floor. If the layout of house projects with a hipped roof provides for the presence of this room of this room, then for comfortable living in it it is important to choose the slope correctly in order to prevent a decrease in the area of ​​the attic and the height of its premises in the case of underestimation of its values, and the organization of a large unused space under the ridge due to its excessive increase. In the case of an attic cottage, the roof slope should be between 38° - 45°. For a roof whose slopes are located at an angle of less than 30°, the best option would be to design an attic.

An increase in the angle of inclination of the slopes and, as a result, the need for more materials arises due to an increase in the length of the rafters and the area of ​​the structure, therefore the estimate for its construction increases significantly.

The usual hipped roofs, forming an attic or attic, to a certain extent limit the spatial possibilities of a country house. Initially, they tried to solve this problem by using attic floors, and over time, waterproofing technologies made it possible for houses with a flat roof to appear, and most developers now have a catalog of projects for such structures. Of course, they are somewhat unusual for our traditions, but interesting from an architectural and practical point of view.

Carefully thought out flat roof design Source domnomore.com

Advantages and disadvantages of a flat roof

It is clear that a well-equipped flat area at the top of the building can be used as a recreation area, a gym, or an original living room - its purpose depends entirely on the imagination and interests of the owners. But first of all, the roof of a house is a guarantor of the reliability, waterproofness and durability of the entire building. Therefore, a roof without slopes, like everything new, raises many questions, the main one among them: what is good about such a design and what may be wrong with it.

Arguments for horizontal roofing

• The flat roof attracts with its simplicity and time of installation. The roofing layers are laid on concrete slabs supported by wall panels. There is no need to create a sheathing, use timber, boards, or other lumber; the surface is installed in one plane, without scaffolding or insurance. This saves time, finances, and resources.
• The horizontal plane design is reliable, durable, and does not require annual maintenance. If the technology and sequence of construction work is followed, and the drainage of melt and rainwater is properly arranged, a long service life is guaranteed.
• High thermal insulation capacity of all roofing options.

A well-made roof allows you to even build a lawn on it. Source proroofer.ru

• Saving materials, working time, and money costs by reducing area.
• Ease of installation and maintenance of various equipment (air conditioners, ventilation, antennas, solar panels);
• Attractive design of the facade of the house with a flat roof, clarity and completeness of lines.
• The ability to use the additionally created area at your own discretion - recreation, sports, hobbies, entertainment.

In general, the design of a house with a flat roof fits well into the surrounding nature, and a practical approach to the additional space created on the roof improves the quality of living and leisure activities.

Cons of a flat roof

The main and significant disadvantage of the horizontal design is the danger of leakage. The snow that has accumulated over the winter melts and seeps through the smallest cracks, gradually expanding them, moistening the walls of the house. This is a common occurrence with roofs that are installed incorrectly. This drawback will not appear if all the work was carried out using technology, but whether this will be possible will not be known immediately.

The second most important disadvantage of a flat roof is the guaranteed accumulation of snow on it, which will have to be cleaned manually if you plan to go “out into the open sky” in winter.

Video description

What you should think about before creating a flat roof - in the video:

As a result, you can only trust the construction of a house with a flat roof to a developer who provides a guarantee for the work performed, plus, you need to be prepared for snow removal work.

Main types of flat roofs

The unusual configuration of a flat roof is not only functional and beautiful, but also diverse. Without going into details, initially they are conditionally divided into two large groups - exploited and non-exploited. Each of them, in turn, is structurally performed using traditional (classical) or inversion technologies.

Separation by method of use

Exploited. They are used by the owners of the house as additional space in the house. To do this, it is important that the surface is strong, even and smooth. A slight slope of up to 5°, necessary for water drainage, does not interfere with free movement and is practically not felt. In most cases, a house with a serviceable roof is preferable due to its additional features.

Part of a flat roof can be transparent Source domsireni.ru

Unexploited. Structurally simpler, since there is no need for a rigid base for waterproofing and rigid insulation. To maintain the roof, ladders and walkways are placed on it so as not to create an uneven load. This type of flat roof is cheaper to construct, but because of this, the estimated service life is shorter than a more complex flat roof in use.

Design differences

Any flat roof is a kind of “pie” in which hydro-, thermal- and vapor barriers alternate. In some versions, layers are also added to increase the overall strength of the coating.

Classic (traditional) flat roofing is also known as “soft”. Its peculiarity is the location of the waterproofing layer, which is placed outside. The softness of this coating is due to the bitumen-containing component of the waterproofing.

The disadvantage of this solution is that the top layer is constantly exposed to the sun's UV rays and temperature changes.

Their influence is especially destructive with the onset of frost, when at night the temperature may already be below zero, but during the day the air still warms up well. As a result, the waterproofing is destroyed over time and moisture from rain and melting snow gets onto the concrete base and through the cracks in the joints of the slabs into the building.

Pie classic flat roof Source pronovostroy.ru

The roof is inverted or lightweight, designed taking into account the sad experience of using the classic one. It has a significantly longer service life due to the inversion (turning over) of the arrangement of the “pie” layers, which eliminates the rapid failure of the waterproofing coating. Here, the concrete base is initially waterproofed, then there is a layer of durable hydrophobic (not wetted by water) insulation, on which there is already a “working” coating on which you can walk. Gravel, crushed stone or paving stones are often used as the latter. The quality of the inversion roof insulation allows you to even install a grass lawn on it or lay paving slabs.

Inversion roof pie Source dom-steny.ru

The beginning of everything is a project

Having decided to build a house with a flat roof, first of all you need to decide on the purpose of the roof - whether you need it to be used or not. There will be a serious difference in cost between them, because the first option provides for a reinforced foundation and load-bearing walls, taking into account the weight of reinforced concrete floors (especially for a two-story house).

The main purpose of drawing up a project is precisely to plan all the loads that the building will experience in order to determine the amount of materials that will be used for its construction. In addition, design helps to draw up a clear and understandable plan for the proposed work. Specialized programs are used to draw up the project, so it is strongly not recommended to take on this work yourself without having the necessary skills.

Moreover, you should not rely on your own strength if you want to get a house with a complex shape. Source kakpotolok.ru

The main design stages are as follows:

• Drawing up a general sketch of the building. When the developer knows the linear parameters of the object being built and what materials it is planned to be built from, designers can already calculate the weight of the building, and therefore calculate the load on the foundation. In addition, the known shape of the building makes it possible to calculate wind and snow loads, which are added to the weight of the house.
• Calculation of load-bearing structures. Here the number of beams to create the sheathing, their cross-section and length are calculated.
• Creation of a plan diagram. On it, in addition to the main walls, all additional elements of the future structure are drawn and their location is indicated.

Video description

Review of the project of a house with a flat roof from the architect on video:

Houses with a flat roof can be designed in almost any style, but the most functional and design-appropriate style is high-tech. This could be a small cubic house designed for a married couple or a large modern cottage with terraces on the ground and on the roof.

In addition to the adapted architectural and construction project, it is advisable to order a working plan, taking into account the characteristics of the house, in relation to the construction volumes. Thus, the total cost of the future home is determined.

The roof plan indicates the slopes and location of additional elements Source homycomfort.ru

What the plan should consider

Despite its apparent simplicity, a flat roof consists of a fairly large number of different elements and each of them has certain nuances in selection and installation.

• Junction nodes. These are all the intersections of horizontal and vertical planes - outer sides, chimney walls, ventilation outlets, etc. The design of the junction units must ensure complete tightness of the connection, therefore it is carried out strictly according to the technology prescribed for the materials used.

Sealing of junction points Source build-sami.ru

• Cornice. It is needed to protect the walls and blind areas of the building from water leakage from the roof, and simply gives the building an architecturally finished look. Depending on the climatic characteristics of the region, the width of the cornice can be 0.5-1 meter.

The eaves extend to the required distance Source krysha-expert.ru

• Drainage funnels. They are installed to remove water that collects from the entire surface of the roof in its lowest areas. The approximate number of funnels is one for every 0.75 m² of roof surface area.

Funnels for collecting water Source productstroy.ru

• Aerators and weather vanes. The purpose of these elements is to remove water vapor that forms inside the coating cake.

Wind vane on a flat roof Source interistroy.ru

• Lightning rod. It is made in the form of a horizontal mesh or vertical lightning rods.

Horizontal and vertical lightning rod on a flat roof Source assz.ru

• Drainage Regulates the flow of water from the roof. It can be external or internal - the first option is cheaper and easier to operate.

The best way to drain water is through a drainage system. Source nkkconsult.ru

We must always remember that the coordinated interaction of all components is ensured solely by the use of suitable materials and strict adherence to construction technology.

Examples of projects

When choosing a project for a future house, it is useful to pay attention not only to its architecture and dimensions, but also to the nature of the roof, the material of the floors, the structure of the roof and the possibility of using it as an addition to the total area of ​​the house.

Video description

Some examples of projects in the video:

Two-story house in Hi-Tech style

Project of a high-tech modern house with a flat roof and warm walls made of aerated concrete and ceramic blocks. Two-story, medium size (up to 150 m²), designed for arranging a used flat roof.

The stepped configuration made it possible to divide the upper space, where one part of the roof is used to house process equipment.

The design of the facade is interesting, combining smooth walls and textured finishes.

Project appearance Source lagrans.com

Layout of rooms on the first and second floor Source mainavi.ru

One-story house

A small family with an average income will comfortably accommodate in a modern one-story compact house, the roof of which serves as an addition to the total area. Panoramic windows, a large kitchen, and the orientation of the living spaces to the south and southwest maintain the warmth and comfort of the house.

The slight slope of the roof ensures the drainage of rain and melt water and does not interfere with safe movement on the roof. The estimated area of ​​86 m² is increased due to the exploitable roof. Monolithic flooring and PVC roof membrane guarantee a long service life of the house. The flat roof emphasizes the volume of the room and gives the entire structure a modern look.

Photo of the project of a modern house with a flat roof Source pinterest.com

Room layout Source dom4m.ru

A house for a large family corresponds to the ideas of modern construction. Good thermal and waterproofing of the roof allows you to create additional places for relaxation or training. Aerated concrete walls and monolithic ceilings retain heat in the rooms.

Despite the significant area of ​​the building (more than 300 m²), thanks to the flat roof it looks light and neat Source assz.ru

Source domo.com.pl

Source interistroy.ru

On our website you can get acquainted with the most popular projects two-story houses from construction companies represented at the exhibition of Low-Rise Country houses.

Cubic house

A square house with a flat roof in the cubist style for a family with two children looks stylish due to the absence of a high hip roof.

A neat, voluminous, two-story house with corner glazing stands firmly on the site, attracting attention. The house is interesting from all sides, while the roof serves as its continuation, emphasizing the cubic architectural style. It is proposed to build such a house from sandwich panels, which provide sufficient thermal insulation and structural strength.

Cubic two-story house Source rosstroycom.ru

Source doma-omsk.ru

Source rosstroycom.ru

Wooden two-story house

Not everyone prefers to use exclusively modern materials during construction, preferring time-tested classics. A wooden house with a flat roof is not just the right solution from the point of view of environmental friendliness of the building - it is also simply a very beautiful design.

Extraordinarily beautiful wooden house with modern layout Source yandex.kz

Any housewife will be happy with such a kitchen Source fireswirl.co

As a result, when should you choose a house with a flat roof?

All projects of houses with a flat roof are examples of beauty, conciseness and efficient use of space in modern buildings. If these aspects are important first, then such houses will be the right choice. The main thing during their construction is to choose a developer who will strictly adhere to the technology prescribed by the project.

Any architectural and construction project consists of three parts: architectural, design and engineering. This is a document without which the developer will not receive permission to begin construction.

The main part of the project is the architectural and design sections. If the customer is absolutely sure that the construction team will have intelligent specialists in engineering networks, then they can refuse to develop this part of the project in a specialized company. But it is necessary to understand that the architect, designer and engineer work on the project together and such aspects as, for example, grooves and openings in the walls for laying pipes and wires are provided for by them in advance.

The engineering part of the project is divided into several parts

• Water supply and sewerage (WSC)

1. water supply scheme
2. sewerage diagram
3. general view of the system.

Before starting design, it is necessary to decide what kind of communication will be - individual or connected to a centralized system.

Individual water supply provides complete independence from external conditions. But you must remember that you will need your own water sources, and drilling a well will cost a decent amount.

Connecting to a centralized system will require developing a project in accordance with the technical conditions of the existing network and obtaining permission to connect.

When connecting a sewerage system to a centralized system, the procedure is the same as when connecting a water supply: submitting a request to the relevant services, developing a project, obtaining permission to tap into the system. If you decide to organize an individual sewer system, then from time to time you will have to invite a sewer service.

• Heating and ventilation (HVAC)

1. heating diagram: calculation of the required equipment power, distribution diagrams of heating mains, location of pipes and radiators
2. ventilation diagram: connection to power electrical equipment, ventilation communications and shafts, passage nodes and, if necessary, placement of stoves and fireplaces
3. boiler piping (if necessary)
4. general instructions and recommendations for the section.

If the ventilation system is always an individual design, then heating can be either individual (stove, air, water, electric) or connected to centralized networks.

• Power supply (ETR)

1. lighting wiring
2. power network wiring
3. ASU diagram
4. grounding system
5. detailed description and characteristics of all system elements.

Electrical systems can be divided into mandatory and optional. Mandatory items include interior and exterior lighting, ventilation, air conditioning and electric heating systems. Additional systems include systems such as “Warm floor” or automated gate control.

IMPORTANT

• Each part of the engineering section of the project must contain general and technical descriptions, specifications of materials and necessary equipment.
• Drawings of elements of all systems and floor electrical wiring are made on a scale of 1:100.

Price: from 100 rub. per m²

Package "Utility networks"

Package "Utility networks"

The engineering network project will allow you to correctly lay communications and make the house truly comfortable and modern.

• Price: from 100 rub. per m²

Making changes to the project

Often the customer is faced with the question: choose a standard house project and save money, while losing on the originality of the future home, or order an individual project, but for a lot of money.

Our company offers a compromise option. You order a standard project, and we make changes to it, taking into account all your wishes as much as possible. Of course, this involves additional costs, but, in any case, such a project will cost much less than work for a specific order. And we will make sure that your home looks original.

The following changes can be made to the house design:

move wall partitions. But only if they are not load-bearing. This operation will allow you to change the size and purpose of the rooms

moving window and door openings will allow you to change the lighting of the rooms and organize convenient access to the rooms you need

changing the type of ceilings and walls will allow you to fully realize your own ideas about economical and rational housing

change the height of the ceilings. Although all our houses are designed with an optimal room height of 2.8 m, some customers believe that high ceilings provide additional coziness and comfort

Converting an attic into a living space will give you the opportunity to expand your own living space

It is worth changing the angle of inclination of the roof and awnings taking into account the climatic conditions of a particular region

it is necessary to change the type of foundation, taking into account the engineering and geological parameters of the soil. It is also possible to add or change a basement or ground floor

you can add, remove, change a garage or terrace, in accordance with your ideas about the functionality of your home

changing the structural composition, construction and finishing materials will allow you to economically manage your own financial resources

the project in a mirror image will allow the house to organically fit into the surrounding landscape.

The changes made should not affect the safety of the home.

Too many changes usually do not improve the project. If you couldn’t choose a suitable house from the catalogs, then maybe it’s worth ordering housing from an architect based on an individual project.

Price: from 2000 rub.

Making changes to the project

Making changes to the project

A house built according to a standard design can look original

• Price: from 2,000 rub.

BIMx model

We keep up with the times and today we offer you the opportunity to receive, along with project documentation BIMx model - based on technology that provides simultaneous navigation through 2D documentation and 3D building models.

Now you can “twist, walk around inside, see your future Home from all sides” View all sizes and heights, opening specifications, etc. You will receive a file that will be your reliable, convenient assistant for monitoring construction.

*You receive the file electronically and use it using the BIMX application on Apple and Android mobile devices

The BIMX application is available for free in Play Market, App store

BiMx demo

BIMx model

BIMx model

BIMx model - interactive viewing of a three-dimensional model of your home. Now you can “twist, walk around inside, see your future Home from all sides”

• Price 10,500 rub.

Package "Foundation adaptation"

When a standard house design is developed, certain average soil parameters are taken as a basis. But without accurate geological examination data, it is difficult to take into account all the nuances when designing. Therefore, often the engineering and geological characteristics of a real site differ significantly from those originally included in the project. This means that the foundation - the basis of the entire house - will need to be modified to make it strong and reliable.

To completely eliminate all problems when laying the foundation, our company’s specialists have developed the “Foundation Adaptation” package. When implementing the package, not only technical characteristics are taken into account, but also the wishes of the customer.

This package includes:

• selection of foundation type
• calculation of technical parameters:

Depth of laying the base of the foundation
- load-bearing capacity
- indicators of soil stress under the foundation
- cross-sectional area of ​​working reinforcement, etc.

• detailed drawings of the zero cycle
• cost sheet for construction materials.

Adaptation of the foundation provides a complete guarantee of its strength, and therefore the reliability of the entire building. You are guaranteed to get rid of problems such as shrinkage and cracks during the operation of a finished house. Moreover, often the adapted foundation turns out to be cheaper than the option originally included in the project. And this will help save materials and financial resources.

Price: 14,000 rub.

Package "Foundation adaptation"

Package "Foundation adaptation"

A carefully prepared foundation project - a strong and reliable house

• Price 14,000 rub.

Individual design

If you decide to build a house, then you have your own idea of ​​what your dream home should be like. And if none of the standard projects suits you, it makes sense to think about an individual project. In addition, all your wishes will be taken into account as much as possible: level of comfort, family composition, even the view from the window. It is clear that such a project will not be cheap. But you will know for sure that there is no other like it.
Sometimes, however, you have to resort to individual design. For example, a developer received a plot of land with a non-standard configuration, and not a single standard project simply fits into it. And it also happens that the number of changes made by the customer is such that it is easier and cheaper to design a house from scratch.

Stages of working on an individual project:

• development of technical specifications for house design
• contract for design work
• preparation of a preliminary design: linking the building to the area, external and internal views, layouts, sections
• detailed study of project sections.

In addition, you can also order:

• projects for additional structures - garage, workshop, bathhouse, etc.
• visualization of the project in 3D format.

Ultimately, the customer receives a package of design documentation consisting of architectural and structural sections.

The project features:

• General plan of the house linking it to the boundaries of the site.
• Floor plans, which indicate the thickness of walls, lintels and partitions, room areas, specifications of windows and doorways.
• Facade plans indicating finishing materials and color schemes.
• Sections of the building and main components.
• Drawings and sections of the foundation, material consumption sheet.
• Calculation of the ceiling, roof truss system, insulation and waterproofing components of the roof.

You can decide on the style of your future home in the “Individual Design” catalog.

Price: from 450 rub. / m²

Individual design

Individual design

Realize your individuality with a custom project!

• Price: from 450 rub. / m²

Package "Tender proposal"

For any developer, the question from the funny nursery rhyme “what should we build a house...?” far from idle. Moreover, the cost of building a house depends on many factors. Therefore, you should not estimate costs by eye. Without complete information, it will not be possible to calculate everything down to the smallest detail and, in the end, it will cost you more. And, in addition, a careful calculation of the cost of materials and work affects not only your finances, but also the time frame for building a house.

You can accurately calculate construction costs using the “Tender Offer” service developed by our specialists. Essentially, this is a document that provides a complete list of all construction materials and work, indicating their volumes.

Having a tender offer allows you to:

• get a real picture of the costs of upcoming construction
• attract a construction company that can offer the most favorable conditions for the work
• not only understand the essence of the construction process, but also competently control the consumption of building materials, independently adjusting prices for each item
• competently control the actions of contractors at all stages of construction

a tender proposal supported by information on the cost of materials and construction work is a serious argument for obtaining credit funds from the bank.

Package "Tender proposal"

Tender proposal:

Request a detailed estimate. Build for your own benefit!

• Price 10,500 rub.

Anti-ice package

Snowdrifts and ice on the roof of your house in winter cause a lot of trouble. You can, of course, climb onto the roof and swing a shovel in the cold for 2-3 hours - no matter what. But effective snow melting and anti-icing systems have long been invented and widely used. Their basis is heating cables. The system is organized according to the same principle as a “warm floor”. Only more powerful and the cable laying step is smaller.

The Anti-Ice package is developed taking into account the characteristics of the home's energy supply:

for the roof and gutters: snow melting in gutters, at the edge of the roof to prevent the formation of icicles and ice in pipes

for the entrance group: heated steps, paths and open areas

for the entrance to the garage: heated driveways

in addition, sometimes the Anti-Ice system is used to heat the soil in greenhouses, and for landscape heating of flower beds, lawns and lawns, as well as for heating sports facilities.

During the design process, the minimum energy consumption is calculated and fire safety is ensured. When creating an Anti-Ice system, it is recommended to use only certified self-heating elements that do not support combustion. In addition, the system is equipped with an overheat shutdown device or a differential circuit breaker to automatically shut down the system when energy loss is detected. If the system turns out to be too large, it is divided into smaller sections. This makes it easier to manage its work.

Important:

For a multi-pitched roof, the specialists of our company will design the Anti-Ice system according to individual orders.

Price: 4500 rub.

Anti-ice package

Anti-ice package

Your comfort and safety in winter

• Price 4,500 rub.

Package "Lightning Protection"

Often, developers do not attach much importance to protecting their own houses from lightning: some save, some count, others hope for chance. But 3-4 years after building a house, many people remember lightning protection. Either my neighbor's household appliances burned out in a thunderstorm, or I came across statistics on how many fires due to lightning happen per year.

We propose to resolve the issue immediately: to provide protection already at the design stage of the house. It’s worth thinking about this, at least for purely aesthetic reasons - you won’t need to once again hammer into the walls of the house and pull the down conductor along the facade, disrupting the thoughtful appearance of the building.

Lightning protection for a home is a system of devices located both outside and indoors. External lightning protection prevents lightning from entering the house, while internal protection protects the electrical network from sudden power surges. And special devices protect electrical equipment from sudden changes in the electromagnetic field within the radius of a lightning strike.

The Lightning Protection package includes

• layout diagram of lightning rods that absorb direct lightning strikes
• cross-sectional diagram of a down conductor diverting current from the lightning rod to grounding
• diagram of a grounding loop that distributes lightning energy in the soil, ensuring complete safety
• averaged resistance calculations
• detailed list of required materials
• recommendations for project implementation.

The Lightning Protection package from Dom4M guarantees your home safety even in the most severe thunderstorm.

Package "Lightning Protection"

Package "Lightning Protection"

Lightning protection: think about safety in advance

• Price 3,100 rub.

Package "Central vacuum cleaner"

"Central vacuum cleaner" is a type of aspiration system(removal of small particles by sucking them in with an air flow).

The system consists of:

• vacuum cleaner(installed in the technical room);
• air duct system along which the dust-air mass moves (hidden installation is often carried out in the preparation of the floor or in the space behind the suspended ceiling);
• pneumosockets and pneumatic scoops(the first is connected to a flexible hose with a telescopic rod and a nozzle, as in a regular vacuum cleaner, the second is intended for express cleaning, usually in the kitchen).

Pros:

• removable dusty no air gets in back into the room, and is “thrown out” after the unit onto the street;
• No noise in cleaned areas.
• Ease of cleaning without “dragging” the vacuum cleaner from room to room, without using extension cords.
• Hidden installation system, there is nothing in the room except an air outlet.

Project price: from 3100 rub.

Package "Central vacuum cleaner"

Package "Central vacuum cleaner"

"An integral part of a modern home is comfort, cleanliness and fresh air"

• Project price: from 3,100 rubles.

Package "Comfortable Home"

Explanatory dictionaries claim that comfort is a set of household amenities, without which life is unthinkable
modern man in a modern home. Most of these amenities are included at the design stage. But we are ready to expand their list and help clients make their own homes as comfortable as possible.

Therefore, our company Dom4m has developed for you the “Comfortable Home” package, which will make your home cooler on a hot summer day, and cozy and warm on winter colds.

The Comfortable Home package includes

• Warm floor project. This is a modern technology for heating a home. It can be used by connecting to both a local and centralized heating system. In addition, heated floors can be both the main and additional source of heat in the room. The main advantage of the system is that it creates a uniform thermal regime, does not dry out the air, and at the same time fits organically into any interior.
• Design of a ventilation system with recovery. Unlike traditional systems, ventilation with recovery makes it possible to save significant money during operation. The essence of the system is that the exhaust air, passing through the recuperator, gives up its heat to the cold flow coming from the street. Everything ingenious is simple. This system allows you to significantly reduce heating costs. Savings reach up to 80%. And, in addition, the load on the network is reduced. In the summer, using a ventilation system with recovery, you can cool warm air from the street. And here you already get savings from reducing energy consumption when air conditioning your home.
• Air conditioning system design. This project offers you the choice of a ducted air conditioner with distribution of air flows throughout the rooms or a multi-split system, which allows you to connect several indoor units to an external unit at once.

The architectural appearance of a building is largely determined by the type and shape of the roof. But, paying attention to the aesthetic component, we must not forget about the requirements for the functionality of the roof.

Varieties of hipped structures

The solutions presented on our website include buildings with a laconic functional roof, as well as buildings with roofs of complex shapes, the design of which includes the installation of dormer and dormer windows, a combination of roofs at different levels, etc. We offer two main types of hipped structures.

Tent. The upper ends of the corner rafters converge at one point, forming a ridge unit. All slopes are identical isosceles triangles.

Hip. The corner rafters with their upper ends are attached in pairs to the ridge, the length of which is less than the length of the slope, due to which two triangular and two trapezoidal slopes are formed.

Advantages of 4-pitch roofs

Reliability. The configuration and angle of inclination of the hipped roof planes allow it to withstand high snow loads, as well as withstand strong gusts of wind due to its low windage.

Possibility of creating an attic. Hip structures are perfect for organizing this room, allowing you to significantly increase the usable area of ​​the house. On our website you will find projects of cottages with a 4-pitched roof, which include an attic.

Wide selection of roofing coverings. For a hip roof, any sheet or piece material can be used, including composite and soft tiles.

Projects of houses with a hipped roof, price and photo of a project of a house with a 4-pitched roof

Projects of houses with a hipped roof. Large range of house designs. Finalization of plans for the customer.

Projects of one-story and two-story houses with a hipped roof

It is impossible to start building any house without a well-designed project. It is in it that all data regarding the size, location of rooms and materials used will be displayed. Today, the option of a house with a hipped roof remains very common. This is due to the fact that such buildings are quite spacious, have an attractive appearance and can act as year-round housing.

One-story projects

One-story structures with a hipped roof are an excellent solution for a summer house or private house in which you can live comfortably throughout the year.

Project No1

This design has a total area of ​​139 m2, but the dimensions are 11x15 cm. In total, there are 4 rooms, including 3 bedrooms. The project does not include a basement, garage or attic. The decoration is made of wild stone.

One-story house with a hipped roof 139 m2

Foam block or aerated concrete was used in the construction of the walls. According to the project, the house has: a room for receiving guests, a kitchen, a hall, a pantry, an entrance hall, a boiler room, 3 bedrooms, 2 bathrooms, a winter garden. But you can see what frame houses in the Scandinavian style look like in the photo in this article.

Project No2

The total area of ​​the building is 58 m2, but the living area is 32 m2. The dimensions of the building are 10x8 m. The attic, basement and garage are not included in the project. Plaster was used as cladding.

When constructing the walls, foam blocks or cellular concrete were used. The foundation is of pile-grillage type. The house has: a vestibule, a boiler room, a steam room, a bathroom, a hall, a guest room, a storage room and a bedroom. It will also be interesting to see what an American-style house looks like.

Project No3

This house has a total area of ​​65 m2 and a living area of ​​44 m2. Its dimensions are 9x9 m. There is no attic, basement or garage. Plaster is used to finish the facade. The house has an entrance hall, boiler room, hall, bathroom, 2 bedrooms, bathroom, living room and kitchen.

Project No 4

This project involves a house with a total area of ​​61 m2 and a living area of ​​35 m2. The dimensions of the building are 8x10 m. There is no basement, garage or attic. Plaster is used as external finishing. The walls were erected from cellular concrete or foam blocks. But what designs of beautiful houses in a classic style exist, and what they look like. This article will help you understand.

The base is presented in the form of a strip monolithic reinforced concrete slab. The house contains such rooms as a vestibule, boiler room, steam room, bathroom, bedroom, hall, wardrobe, living room.

Project No5

The total area of ​​the one-story house is 132 m2, and the living area is 68 m2. There is no basement, garage or attic. Facing bricks are used as exterior finishing. Walls are erected from cellular concrete or foam blocks.

According to the project, the house contains the following rooms: entrance hall, hall, living room, 3 bedrooms, 2 bathrooms, dining room, kitchen, pantry. But what the projects of small two-story brick houses look like, and how their construction takes place, is described in great detail in this video.

Two-story projects

A large family should choose a two-story house with a hipped roof, since such structures are quite spacious.

Project No1

This is a two-story house with a full second floor, made in a traditional style. According to the project, the house has a spacious technical room that can be equipped for storing tools. The daytime part of the house is divided into a living room, dining room and kitchen. There is a small storage room under the flight of stairs. The spacious room on the 1st floor may contain an office, which, if necessary, can be converted into a living room. On the second floor there are 3 spacious bedrooms and 2 bathrooms.

Size 225 m2

The total area of ​​the house is 225 m2, and the living area is 172 m2. The roof is slanted at 30 degrees. Its area is 255 m2. The walls are erected from ceramic blocks or cellular concrete. Solid type ceiling. Ceramic tiles and metal tiles are used to cover the roof.

But this article will help you understand what modular country houses look like and how such a house is built.

What a one-story dacha frame-panel one-story house 4x6 looks like can be seen in this article: http://2gazon.ru/postroiki/zhilye/karkasno-shhitovye-dachnye-doma.html

You may also be interested in learning about what kind of house to build for permanent residence, and what parameters should be used to choose it.

Project No2

This two-story home features a side-mounted garage and an office on the ground floor. The house is made in a classic form, which looks advantageous with the coloristic design of the exterior. Thanks to the discreet design, all attention is focused on the panoramic glazing of the second floor.

Even when planning the internal area, harmony was maintained. On the ground floor there is a day area. This is a guest room and a kitchen. There is access to the house from the garage through a separate dressing room. On the ground floor there is a bathroom and an additional room.

size 162 m2

On the second floor there are 4 bedrooms, which form the night area. The most spacious room has access to a balcony. There you can sit on warm summer evenings with a cup of tea and just relax. Each bedroom is equipped with a built-in wardrobe. But the bathroom is shared.

The total building area is 162 m2, and the living area is 137 m2. The roof is slanted at 25 degrees and its area will be 191 m2. When constructing walls, cellular concrete or ceramic blocks are used. Solid type ceiling. Ceramic tiles, metal tiles or cement-sand tiles can be used for roofing. But this article will help you understand what the plan of an 8x8 house with a brick attic will look like, and how good this house project looks.

Project No3

This project involves the construction of a compact two-story house, designed in a simple style. The laconic shape is distinguished by the hipped roof and the calibrated façade cladding. 4 people can live in such a house comfortably.

There is also a spacious bathroom on the ground floor. There are 3 bedrooms on the second floor. One of them contains a dressing room. There is also a shared bathroom on the second floor.

Size 114 m2

The living area of ​​the house will be 114 m2. The roof is sloped at 22 degrees and its area is 114 m2. For the construction of walls, cellular concrete or ceramic blocks are used. Solid type ceiling. The roofing can be done using ceramic tiles, metal tiles and cement-sand tiles.

Types of hipped roofs

The hipped roof structure can be made in several options, including:

1. Classic. It has straight rafters without fractures, corner ribs originating from the ridge. All overhangs are concentrated on one level.
2. Tent. This option involves bringing all the edges together at one central point.
3. Danish hip. In its upper part there are short gable slopes. It will be possible to provide full vertical windows in the Danish roof.
4. Broken or attic hip. This design is difficult to manufacture, but with its help you can allocate a large area for living rooms.

Houses with a hipped roof remain one of the most popular today. This popularity is due to the fact that it is possible to equip an additional room. To install such a roof, metal or ceramic tiles are often used. The above projects can be used to build a cozy and complete home for year-round living for the whole family with comfortable conditions.

Projects of houses with a hipped roof, how to make them

Projects of houses with a hipped roof. One-story and two-story houses with a hipped roof. Types of hipped roofs for houses.

Projects of houses with a hipped roof

One of the important stages in building a house is creating a roof. Not only the appearance of the house, but also the internal comfort depends on its correct selection and construction. For country houses, as a rule, they choose a hipped roof, which has many advantages over other types of roofing, but its construction also requires knowledge of many nuances.

Project of a cottage with a hipped roof

In addition, this type of roof has several varieties with their own characteristics.

Advantages of a hipped roof

First of all, the hipped roof ensures uniform heating of the room from all sides. In addition, the space under the roof forms a warm and large attic; as a result, when building a one-story house, you essentially get two floors, and you can build an attic in the attic space.

It’s probably not even worth saying that such a roof provides excellent protection from bad weather, but few people know that this type of covering is more resistant to wind. Such a roof allows you to cover a structure of almost any complexity, in contrast to a gable roof, which is intended mainly for standard buildings.

An example of a hipped roof in an original residential building project

The design of a hipped roof allows you to include additional elements in its design that serve not only as a decorative element, but also carry a functional load. These can be attic and dormer windows, which will enliven the appearance of the house, or panoramic windows located in the body of the roof itself.

Types of roofs consisting of four slopes

There are three main types of hipped roofs:

1. Hip roofs are the easiest roofs to make due to the absence of additional elements. This coating looks like a pyramid, at the base of which lies a square or rectangle. Essentially, these are four identical or two paired triangles converging at one point. As is clear, pediments are not provided for this design.

An example of a hipped hipped roof at a cottage

• The design of the hip roof also does not include gables, and it consists of two pairs of sides of different shapes. From the end or along the short side of the house, the slope looks like a triangle, along the long side - like a trapezoid.
• Half-hip is perhaps the most difficult design to manufacture, since each slope is made of two parts: upper triangular and lower trapezoidal. Such a roof allows you to equip a spacious attic in the attic with panoramic windows, and, if desired, a balcony. At the same time, the strength and reliability of such a coating does not suffer at all. As a rule, such roofs are used when arranging two-story houses.

Parameters taken into account when constructing a hipped roof

Such a covering is perhaps the most difficult to manufacture, mainly due to the fact that such a roof is one of the heaviest that are used in private construction.

Therefore, before starting its construction, it is necessary to create a project that takes into account all the loads that will affect both the roof itself and the structure.

Loads mean the following impacts on the rafter system:

• The total weight of the structure itself, which consists of the mass of roofing materials and various types of insulation;
• The weight of additional elements, such as windows, antennas, ladders and other equipment located directly on the roof surface;
• Loads from wind, snow and other precipitation, while the calculation takes into account the average statistical data inherent in the region in which construction is carried out.

Project of a cottage with an attic, a veranda and a hipped roof

The structure is divided into separate sections, for each of which a separate calculation is carried out. This takes into account the fact that most of the elements in the real state are in an inclined position and their dimensions on paper do not correspond to the true ones.

Also, the design of the roof takes into account the standard dimensions of the materials used, this will eliminate additional work on cutting and fitting and will significantly reduce the amount of waste. It is still better to entrust the creation of the project to a professional, since not every person can correctly calculate the design, especially if many additional elements are planned.

In the project that the specialist will provide, in addition to the drawing of the rafter system, there must be calculations for the length of the rafters, the location of the sheathing and diagrams of the connection points of all elements, both basic and additional.

What material to choose for rafters and roofing

As a rule, larch or pine wood is selected as the material for the rafter system, which is carefully checked for defects and cracks.

Certain requirements are also imposed on the moisture content of raw materials; optimally it should be at the level of 18-22%.

Wetter timber must be dried first, since the installation of a rafter system made of wet wood will lead to deformation and distortion of the entire structure during drying.

The cross-section of the timber used in construction must be determined during the project development process. But in some cases it is permissible to use an alternative option, when a board with a section of 5x10 cm and 5x20 cm is used.

Project of a house with a garage in high-tech style

If the strength characteristics of such boards are not enough, they can be doubled.

The roofing material used for covering is selected depending on the climate zone, the purpose of the attic area and the angle of the roof.

• As a rule, for a roof located at an angle of 30-60 degrees, tiles or a roof consisting of individual elements are selected as the material;
• An angle of 15-60 degrees is preferable for a roof made of steel or asbestos sheets;
• The roof at 10-20 degrees is covered with slate or rolled material.

Return to contents

How to determine the amount of materials needed

Based on the completed project, the amount of material needed and its cost are determined.

There are several factors to consider:

1. First of all, it is necessary to accurately calculate the total roof area, which is calculated using the eaves overhangs.

Project of a one-story house with an original hipped roof

• Select the material from which the roof will be made, although it is preferable to complete this stage at the design stage.
• Consider the allowances for parapets and canopies, as well as the size of the overlaps during installation.
• When cutting material for construction, a certain amount of waste is generated in any case, so building materials are purchased with a reserve of 10-15% of the total volume.

When purchasing material, do not try to save money at the expense of quality; the wood should not have defects or flaws.

Features of installing a hipped roof

The main task when arranging a roof is to correctly manufacture the rafter system; the strength and rigidity of the structure depends on it:

1. First of all, the mauerlat is installed and anchored, which is a beam laid along the perimeter of the outer wall. In this case, the distance from the edge should be at least 5 cm.
2. Next, markings are made according to the roof design for other main structural elements.

Project of a two-story house with a hipped roof

• Racks and ridge beams are installed, which must be leveled. For these purposes, it is most convenient to use a plumb line.
• To secure the racks vertically, jibs are used (supports positioned at an angle to the rack).
• Install all the necessary rafters and brackets. Moreover, if the house, and therefore the roof, is small in size, hanging rafters are used; for large buildings, an inclined version is used.
• Lathing, insulation and roofing material are installed. Valleys (gutters that drain water from the roof surface) and a ridge are installed.

By the way, hipped roofs are an excellent option for use on various gazebos. Since such a roof is very similar to a tent, it perfectly protects from bad weather and you can use the gazebo regardless of rain or heat.

In addition, such buildings look quite attractive and modern, thanks to which they fit perfectly into the surrounding landscape.

But using a hipped roof for a bathhouse is quite impractical, since the price of this structure is significantly higher than the cost of a conventional gable roof. At the same time, the bathhouse definitely does not need an attic. However, if landscape design involves the construction of all buildings in the same style, then no one bothers to make a similar roof for the bathhouse.

Projects of one-story and two-story houses with a hipped roof

Features of projects of private houses and cottages with a hipped roof. How to make such a roof with your own hands, photos and videos.